Liczymy pasujące modele…
Please click if you appreciate my work :) The German automotive icon – BMW E36 M3 as wall-mounted art. This 3D printable BMW E36 M3 model captures the distinctive body lines, sporty profile, and aggressive style of this classic BMW.…
A simple but very sturdy wall mount for a FS91 and FS31 trimmer. It may fit other models as well with the same injection molded part around the upper driveshaft. I modeled this around my specific machine and you may need to scale it up to…
I have change a few details from Sean&Lucia model. All the fillet are now chamfers Added chamfer in the bottom corners to add strenght Added chamfer were the Packout sits for a better stability of the case in the bracket The top surface…
Sturdy wall mount for a DUX60 Makita trimmer. I modeled this around my specific machine and you may need to scale it up to make yours fit properly. Mount it with 3" to 3.5" #8 construction screws. Make sure you get the screws in a stud.…
This wallmount allows you to place your LEGO Speedchampions Car's in an 45° degree angle off the wall. It will fit all cars which have the basepart as you see in one of the pictures, like these: Lamborghini Countach #76908, Koenigsegg…
This is a wallmount for the Home Assistant ZBT-2 zigbee/thread antenna. The mounting holes are designed for M3 countersunk screws. Overall it has a snug fit and offers enough resistance that the antenna cant easily fall out of the mount.…
Wallmount and cable organizer for Tesla's Model 3 Type 2 plug. This is a remix of designs from users turtel89 & MB96 from Thingiverse to add a top piece to hang the cable. Update 21.01.17: Added version without Tesla Logo Print…
Swiffer Wetjet Wallmount Just a wallmount for the swiffer wetjet. Nothing fancy, but useful. Print Instructions PLA works just fine for this application 0.2mm layer height 4 perimeters 40% infill
This is a wallmount for a compound bow like the EK Archery Assassin/Exterminator or other use cases - where ever a wall hook comes in handy, this should work. For the screws, the file supports diameters of 5,5mm for the screw and up to…
Wall mounted version of keyboard and mouse holder/stand. The rsdoc file contains models for large and small mouse, published stl, 3mf and gcode are for large mouse variant. No specific printing requirements.
Using this wallmount assembly, you can store your (mountain)bike efficiently and elegantly out of the way. This specific mount is usable for bikes that make use of SPD-pedals. To make sure this mount fits your bike with your specific…
Soporta macetas pequeñas pero se puede escalar para soportar maceteros mas grandes.
Anglegrinder holder for the modular wallmount. 2 pieces, you'll need m4x15 screws to put it together. Baseplate and description: https://www.printables.com/model/202771-modular-wallmount-system-for-various-powertools
Benötigt werden: 3x Wanddübel für 4er oder 4,5er Spax-Schrauben 3x Schrauben M5x10mm mit Flachkopf 3x Muttern M5 2x Kabelbinder klein Muttern M5 von hinten in die Wandplatte einsetzen Schraubenlöcher bohren und Wandplatte befestigen…
Holder for six glasses. Design focus has been on minimal filament consumption and maximum functionability. Holder to be fixed with double sided tape to any vertical surface. Printed with PLA, no support, 0.2mm resolution, nozzle 0.4mm.
This is a battery wall mount for Bosch 18 volt batteries (All 18V Alliance). Simply screw with two screws to a board or directly to the wall. Attention!!! Maybe not quite push to the end, with me it fits when I push them slightly up until…
To hang a board onto the wall, you have to pre-drill a 6mm deep hole with a 30mm forstnerbit and screw the mount into your board.
Wallmount for the Telekom Speedport Hybrid. Fits the 6,8mm thick and 164mm wide stand off the Speedport Hybrid.
A variation or original minimal design.
For a complet set you need 1 Wall mount for caulking gun 3 tube holder 1 wallmount for push knobs 3 wallmount for nozles Happy printing :D
Eine Wandhalterung um die Makita Grasschere DUM604 aufzuhängen. Bringt Ordnung in die Werkstatt. Ich habe den Halter in PETG ohne Support Material gedruckt. Viel Spaß beim Drucken. Wenn Euch das Modell gefällt würde ich mich über ein like…
Wallmount for MIG MAG welding wire roller. Material ASA Layer 0.2mm Infill 20% MIG clamp i used https://www.thingiverse.com/thing:2786823 Material PETG Layer 0.2mm Infill 20%
Wanted a simple wall holder that would fit perfectly the guitar, it follows perfectly the shape of the head distributing the load evenly and reducing even further the possibility of dents, it leaves a confrontable tolerance for the neck,…
The backstory: Tasked with the challenge of mounting a compact 5-port switch in our attic to facilitate network connectivity for our office outlet and Wi-Fi access points, I found myself with a Zyxel GS-105B at my disposal. With little…
Gcode included for PLA 0.4mm. If you print correct way up no supports needed.
After my car charging cable was lying around in the garage most of the time, i designed this wallmount holder, so the plug is safely stored and i do not accidently drive over it.
Wallmount for Spoolholder X2 The wall mount for the filament spool holder X2 can hold filament spools up to 4kg (or generally spools with a diameter of up to 36cm. With the spacers L, M and S, the distances for the different axes of the…
A amazing Beerholder to screw in the wall. If you need a beerholder - fold it down ant put your drink in. When you finished push it back up. I have it in my livingroom because we often have visitros to watch a movie together. No where to…
Just a vertical rubishbagholder to glue it to the wall with doublesided tape.
Apple AirPort Extreme or AppleTV Wall mount to eliminate it having to sit on shelf
Remixed wall mount to have the plane nose towards the right Lego set 10318 4 perimeters 30% infill Gyroid patern used wood screws of 4mm used
Cover for a 7-inch QLED Quantum Dot Display (Waveshare - SKU: 18625, Part Number: 7HP-CAPQLED). The cover is designed for wall mounting in a room (kitchen, etc.). It includes a template for cutting the hole for the back of the LCD and…
This is a plate for wall mount to organize your various bobbins for the under thread of your sewing machine. The STL file is designed for bobbins for industrial sewing machines like Juki DDL and DLN sewing machines. It is designed with…
Wallmount your repwinders. Two parts, long and short. Short takes one repwinder, long takes two. Combine for your number of repwinders. For a full MMU line up of five repwinders you need two long and one short cleat. Line up the parts…
There are nice stands or mounts for the Xiaomi arround. For me this charging wallmount was the best. But I missed a wallmount for the accessories because I don’t like like the provided clamp that clips the accessories to the vacuum…
a 3ds wallmount , i printed it in pla on my ender 3 v3 SE and made it in shapr3d.
This is a Remix of hxp3d.pl's medium flower pot. When I first printed it, I saw that the squares were about perfect for a tealight if you put it sideways. To not get heat-issues, i took away some of the wall and added a wall-mount, and…
Necklace holder for 11 necklaces intended for wall mounting with adhesive mounting. Printed with MK4S on 0.2mm layers using PLA. I suggest adding a layer modifier for the layers that include the hooks to increase to 100% infill for…
Storagebox for fuses, wallmounted. With: 132.5mm, Depth: 56mm, Height: 170mm Fits: 10A, 16A, 25A, 35A and 50A fuses. Needs supports to be printed.
German ePowerFun ePF-2 Netzteil Wandhalterung inkl. Steckerhalter. Die Schraublöcher mit Senkung dienen der perfekten Montage an der Wand. Durch die angewinkelte Konstruktion lässt sich die LED Ladeanzeige auch von oben ablesen ohne das…
I modyfied Teddyminator's wallmount to fit the existing wall hole distance and mounting hight of my old router. The part that is screwed into the router is unchanged, only the wall mount is slimer and has other dimensions. Hole distance:…
Wallmount for the NLG remote control
Halter für ein Meanwell RS-50-5 Netzteil mit Platz für einen ESP ideal für WLED Holder for a Meanwell RS-50-5 power supply with space for an ESP ideal for WLED
Eine wand Halterung für die Teufel Cage Gaming Kopfhörer Einstellungen: 0.4mm Nozzle auflösung 0.2mm skale 1000%
Intro This supportless wallmountable dispenser is easily printable and designed to fit the smaller tampons used in the EU. It should fit o.b. ProComfort and everything up to roughly 15x55cm (min. fitting six tampons). It can be used…
Wallmount for E-Bike 378wh T.E.C Pack Battery of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor. Mountable with two screws to a wall or, using the holes on the backside with 2 screws (Phillips Rounded Head…
it is made for a friend originally, from personal experiance i reccomend printing the insert at 99% so if your printer is not 100% accurate it still fits. that all being said, it is a good way to hang a small amount of keys eigther on a…
The added cutout makes it easier to remove the Speedmarker from the holder without risking damage to the plastic knurled
At the end of 2017, I found Mike-vom-Mars' hand gestures on Thingiverse (thing:2641409) and decided to use those as a starting point. Some FreeCAD editing was involved; I enlarged the hands so it would fit the 13cm+ body width of my…
Wandhalterung / Wallmount for AVM FritzBox! 7490, 7590, 3490, 6490, 6890, 5491, 5490 Lochabstand 197mm space between router holes = 197mm NEW Wallmount for 7530 with PETg from DasFilament Print Settings Printer Brand: Creality Printer:…
I designed this holder to attach my charger to the wall. The rubber feet must be removed and the housing screws unscrewed. After that, the holders are placed and screwed in again with 4x40mm or 3,5x40mm countersunk screws with a rough…
I created the Playstation symbol by using the "Negative Volume" function in PrusaSlicer 2.4. Scaled to 50% (orientation: X=-40; Y=0; Z=1.05; and rotated in the appropriate direction). The wall brackets need to be mounted at a distance of…
This is a wall mount Basketball Holder for a Size 7 Basketball. I printed with 50% cubic Subdivision Infill, .2mm layer height and 3 line wall thickness at around a 9 hour print in ASA which seems to be plenty Sturdy. The Bracket is…
Wallmount to Wall mount to mount the Echo Pop on the wall at a 45 degree angle. Printed in PLA
Wandhalterung für das Ladegerät vom Audi E-Tron. Ladegerät kann entfernt werden, ohne die Halterung zu lösen. Kein Support notwendig, keine speziellen Druckeigenschaften notwendig. Wall mount for the charger from the Audi E-Tron. Charger…
Nothing special - just a quick Design to mount the AMS on the wall. Works fine for me. If there are any Problems, don't hesitate to contact me! Recommended print settings: 5 Walls/Perimeters, 5 Top/Bottom, 35% infill with ABS For example…
Here's my FirtzBox 7590 Wallmount to mount that great box upside down to the wall with some Space behind the Box to do clean cable management. Just print it like it's shown in the slicer Picture. It can possily fit on the smaller 75x0…
UPDATE 07.05.2023: After several requests i added the versions for the most common tube sizes (10, 12 ,15, 16mm) and for 18mm french cleat bar. :-) A French cleat holder for the (crimper)pliers! Inspired by a model by Mikhail on…
Super easy to use wallmount for the Creality Sonic Pad. Just slide it in with the feet, and you're ready! Printed with 20% infill in PLA. No supports needed
Detailed pike head wallmount decoration
This is a simple wallmount for the Bosch smart eBike system Battery Charger 4A BPC3400. No support needed, 25% infill. OpenSCAD file included as always. Have fun!
A simple holder to store your darts safely on the wall.
Simple centric one-hole, one-screw skadis wallmount. Unkomplizierte Skadis board Montage mit einer Schraube.
A stand for hanging your PS5's Dualsense right in your wall
Xbox controller mount for the honecomb. Print the back on its side it doesnt need supports. print 2 of the pegs they needs two m4x12 screws with nut. Note: took the slope dims for this from chewbuggas wall mount they did that perfect. if…
This is a customizable keystone wall mount from https://thingiverse.com/thing:6647 Many thanks to https://www.thingiverse.com/jsadusk for providing it. Included STLs are for 1, 3 and 5 keystones for a tapered headed 3.5mm screw. Use the…
The perfect piece for the workshop to keep everything neatly organized. I recommend 3 perimeters, 6 top and bottom layer at a layer height of 0.2 mm and 15% Gyorid infill. Feel free to check out all my little gadgets for the workshop.
Wall mount for the Bosch Professional GBL 18V-750 Leaf Blower
Print settings: material PLA/PETG no supports 0,25 layer, infill 10%/15% Aurapol natural filament PLA Na propojení třeba 2ks trubička nebo závitová tyč, nejlépe nerez, 10mm průměr, se závity na koncích(45mm) a 8ks matice M10. Propojení…
Basically the shoe organizer by JGR completely remodeled in FreeCAD that is now Wall mountable an resizable by entering your EU shoe size into the FreeCAD Spreadsheet.
Available Options How to Print Prusa Profile: 0.15mm Quality Other Settings: No support For usage with Wera Kraftform Micro screwdrivers Mounting The Model utilizes 3mm Mounting holes with a 2mm chamfer for screws with a maximum head…
I wanted to make myself a Wallmount, which works for booth pads (125 and 150mm) for the Mirka Deros (550CV/5650CV. This way I can hang the sander no matter what plate diameter I just put on it. Like it? Please don’t forget a like any…
A wall mount that works in almost every orientation. This also works as an under-table mount. this was designed printet for a friend of mine so I don't have that many pictures. I'll print a new version to take more pictures of.
Some-thing to safely wall mount my spare Milwaukee M12 Charger using command strips in a more convenient location. And more options for mounting on various surfaces. Note: Using a minimum of 5 perimeters seems to get the best transition…
Stand or Wallmounted Ständer oder Wandhalter
This is a wallmount to put your E-bike's Bosch charger 36-4-230 BCS220 in. My model was based on @JOGIAREA design but it seems the 2 and 4 amp versions differ a lot. I practicly had to rebuild the whole thing keeping a few visual…
A wall mountable case for the ipad mini second gen (A1491) ## Design Holds and iPad mini. Tested with a second generation A1491 but may work with other generations Uses no screws ## Features - Works with 90 degree and straight through…
Hi, this Wallmount replaces the original stand. I printed mine in PETG with 0.2mm layerheight and no supports. I got some problems printing the front of the mount as you can see on the pictures but i fixed it in the uploaded model. The…
Wandhalterung für Bosch E-Bike Ladegerät 36-2 BCS230 Befestigung mittels 5 Senkkopfschrauben. Weitere Ideen besuchen Sie: www.jogiarea.de Wall mount for Bosch e-bike charger 36-2 BCS230 mounting by means of 5 countersunk screws. For more…
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. I made this version because several people indicated that they liked my eBike Charging Station but preferred a standalone…
Wallmount for Makita DJV181 Jigsaw
English I created a simple wall mount for the Fritz!Box 4060, this uses the original mounting points of the box. If you like the design, feel free to buy me a beer ;-) Versions There are 2 different versions, a smaller version and a…
kompakter Maul/Ringschlüssel Halter. Guter halt. (kann man über Kopf halten)
Wallmount for the Eufy Homebase 3. There are two cutouts for the power cable so you can place the homebase facing left or right.
A simple wall mount for my 125mm exenter sander. Probably will work for other 125mm units as long as they are not too heavy. Feel free to leave a like or make if you like it! Category: Hobby
I loved the simple design from the original, I just wanted to hang my controllers somewhere. Check the Original Files from @ Bengyboo Print 0.2 Layer 4 Walls 20% infill
I simplified this model so that it can be printed without supports and use regular adhesive strips instead of the picture hanging “velcro” ones.
I printed it with a Bambu P1S out of PETG without support in 1h47min. (standard PETG settings) The high version is 45mm wide - 42mm high -95mm long and the lower one is 32mm high. At the picture where its shown at the wall i used the HIGH…
A wallmount for the Bosch powertube (625 Wh, 500Wh). hole in the bottom for the Charger Cable. you can see the powerlevel LEDs and push the indicator button.
Even with 0.3mm pitch, embossing looks good. Three M4 standard screws are required for installation, i.e., screws with an outside diameter of 4 mm on the threaded part. Horizontal and vertical grooves are carved around the screw holes for…
Description Wall-mount bracket designed specifically for the IMOU Ranger 2 camera. Features a compact design with just enough space to accommodate the network cable. For best results, print with the camera attachment side facing the print…
Please link the model if you like it! 'Hello everybody feel free to download this model for personal use, if that are for commercial use you need to pay. its a good way to get your lego cars on the wall so you have more place hope…
AK47/AK74/AR MAG 3X wallmount Bed organic supports recommended 0,2 layers
The dangling power brick of my fancy 10GBE switch annoyed me, so I designed a wall mount for it. Two countersunk screws are used to screw it into place. I added a version for the UniFi Lite 8 POE's slightly bigger power brick, so you…
Simple bracket for the JK Inverter BMS. Is required twice to attach the BMS at each end to a wall or to the battery hou
As the Cable Fritzbox Modem doesn't come with a built in wall mount, i designed a simple one wich will do the job with ease. no special settings needed
Simple wall mounted roll holder for wrapping vinyl rolls.
Be aware that some models differs from the one I bought, especially the size of the cable attachement. Check that before printing pls.
This print allows to elegantly mount your Bosch eBike Charger to the wall, out of the way, right where you need it. This version allows to neatly wrap the DC cord around the 2-layer spool integrated in its base. I made this version…
![[WLED] Meanwell Netzteil halter mit ESP / Meanwell Powersuply wallmount with space for an ESP](https://media.printables.com/media/prints/111343/images/1096842_455c95d2-c3c2-4014-8ea5-8287614b5ccb/screenshot-2022-01-03-081033.png)
