Liczymy pasujące modele…
This is a mounting bracket for the Bigscreen Beyond Link Box . It's designed to (gently!) smush the link box against whatever surface you're screwing to, so don't tighten down too much! Hardware 4x 3x12mm countersunk screws Suggested…
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
I designed a camera mount for the Reolink RLC-823A 16x that allows the camera to be removed quickly and without tools. The reason for this is that I mounted the camera in the window frame so that the window can be opened when needed.
Should have a snug fit on your charging adapter. Holes 5 mm for countersunk head screw. Tight the screws by hand. A narrow gap between this part and the wall is provided to press the charging adapter securely against the wall. My Print…
Wallmount battery holder for the 12V PARKSIDE Performance ( Bauforum24 Edition) cordless screwdriver AND the battery. Is it also available for screwdriver ONLY . Made especially for users who won't let their cordless screwdriver rest with…
Original: https://www.printables.com/model/372300-bosch-ebike-charger-holder-bpc3400-4a/remixes
Needed a wall mount for the carbon monoxide alarm that I picked up. I have made the model so that the hardware is optional. I recommend using 3 walls for this print.
Wallmount for my 24 cl disposable cup dispenser, which is a remix of faultedlogic 's cup dispenser. The center of the holes are 72mm apart, and are made for countersunk 5mm screws. Can really be used for anything, i just made it because…
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I added a recess for the AC adapter so it stays put.
Fits either Ubiquiti Cloud Gateway Max or Ultra, they are the same dimensions Best printed in PETG. Use 5+ perimeters to add strength to the corners and clips Tolerances are really tight, fit fine for me, but you may need to scale up by a…
Intro This supportless wallmountable dispenser is easily printable and designed to fit the smaller tampons used in the EU. It should fit o.b. ProComfort and everything up to roughly 15x55cm (min. fitting six tampons). It can be used…
Wandhalterung für das Bosch E-Bike 4a Ladegerät (Smart System - BPC3400) Wall bracket for the Bosch E-Bike Battery
This wallmount is for standard Playstation 1 and 2. See my design list for wallmounts for other controllers Cable area behind the controller. You can either wrap the cable around the holder, or use a cable tie and just insert the bundle…
A very simple wall-mount holder for the STYRBAR remote, inspired by the Silvercrest smart button holder.
Mount your MacBook Air on the wall for a wireless desk. I used Thunderbolt extenders and a uGREEN Revodok Pro 2111 dongle to charge my MacBook and to run my 2 monitors, stereo, and peripherals. One Thunderbolt 4 cable has to be run…
Update 0.1: BMW is there!!! A Universal Wallmount for all 1:10 Lego Technic Cars. Can be mounted by Screws(Hole=3,7mm) or any other way(as long as it can hold the car) Fixed by Front Wheels (might need to take them off and put back in…
Wall mount for mesh acces point (like Deco X20), 120 x 120 x 55
Wand-/Deckenhalterung für Magcubic HY310 mit seitlichem Einschub für den Beamer. Mit Verschlussmöglichkeit. Gedruckt in petg. Min. 3 walllayers.
A 3 piece design for the Lego Batman tumbler all pieces printed flat, then assembled and screwed to the wall or some board/pictureframe this design allows making different kind of hooks that can be inserted into the main body for…
Easy to print Airbrush wallmount. No need to take off your printed handle. Airbrush and handle will fit in this wallmount. You can display your airbrush collection and have easy access to each paint atomizer. Happy printing
Use this simple shelf to put your Reolink Home Hub in and put it on a wall. The Home Hub is placed sideways to leave access to the cables on the back. It fits very firmly, while the LED indicator/button remains visible and the ventilation…
TRMNL 7.5inch(OG) DIY Case that you can mount with 15x3mm magnets or hang it on the wall. Use 4 M3x6mm screws to put it together. Be careful with the screen and FPC cable during assembly! This is a tight fit design. Make sure the…
Habe eine einfache Wand / unterm Tischhalterung für eine FritzBox 5530 (Fiber)/7530 AX gebaut. Sie wird einfach nur mit 4 schrauben befestigt. Es gibt keine besonderen Druckeinstellung. Drucker : Prusa MK4s Filament : Prusa Galaxy Balck…
With this wallmount, you can mount your Tuya Zigbee Smart Knob to a wall. The Design is like the Fututre Linear Series from Busch Jäger. At the backside, the is space for a 5x2 mm magnet and for double sided tape.
Generic holder for gluegun; keep your workspace empty With this design it is ok if the glue drips a bit ;) Can be used as holder on table too 2h print, I added support enforcers I used ASA, PETG should work (beware of gun nozzle temp)
A slim wallmount for Teufel CS 35 C speakers. With a 16° angle. For vertical or horizontal mounting. You will need some hardware to use this. Look at the last picture. Hardware: 2x M3x12mm screws 2x M3 heat set insert (CNC Kitchen / Voron…
This wall holder stores a couple of standard size magazines conveniently. There is also a smaller version for shopping lists and smaller magazines. There are small dove tail connections on the sides for mounting different kind of holders.…
Mounts with two screws to the wall Printed in PLA 70% infill
A Remix based on the Design from Robbycor (@robbycor_1107199)
Eine einfache Wandhalterung passend für den Bosch GSR 18V-21 Professional. Gedruckt in PETG Galaxy Black ______________________________________ A simple wall mount suitable for the Bosch GSR 18V-21 Professional. Printed in PETG Galaxy Black
Würth Schraubensicherung (LockTide) 45ml/50g Wandhalterung ______________________________________________________________________________ Würth screw lock (LockTide) 45 ml/50 g wall mount
Thickened the sides, added a cross to the middle, made wall mounts, M3 wall holes.
A light but strong hook for headsets, headphones, or basically anything. Designed to be strong yet flexible, a bit rounded to match the curvature of the headband. No support, print flat, and any other setting will work fine no matter what…
A simple kinda hidden wallmount for Sonoff SNZB-02LD Zigbee smart thermometer with four embedded magnets and screwholes Magnet size: 6x2mm and there is four holes for them, you might get away with only two magnets but i went with four.…
Use a bolt and nut or for extra stability and strength if you need to hulk on the paper roll, use a threaded bar all the way through with a nut on each side. For easy assemble/disassemble, use these knobs with the hardware: Print with 4+…
Wall-Mounting-Bracket for BerryBase Full Armor RP5 5 housing. GPIO connector is slightly covered from the bracket. Suitable housing RPI5-FARC-SI: https://www.berrybase.at/detail/019234a61c0c72a682ba4caaa67fd94d
Wallmount battery holder for the 12V PARKSIDE Performance ( Bauforum24 Edition) cordless screwdriver. Also available as DOUBLE holder for screwdriver AND battery . Made especially for users who won't let their cordless screwdriver rest…
Made for 1:8 and 1:10 scale LEGO Technic cars. 1:8 Wheel (d) = 81,6mm 1:10 Wheel (d) = 68,8mm
Wallmount for Worx PowerShare Batteries. Can be easily placed side by side. Screw holes are covered by the insert. I used PLA and PETG. It is tested with 2.0, 2.5 and 4.0 Ah batteries. Please note, that this wallmount does only fit the…
Hello stranger! If you here, you probably got a problem with "where the hell is my laundry pods?!" and now, you found the Solution! Easy to print, easy to install (2 screws 4.5mm in diameter) and very comfortable to use) Fits ever boxes…
When everything on it s own place, life s good) 1. Wallmounted, so no more pudles under the dispencer 2. Easy installation, 2 screws (max 4mm diameter) and here we are 3. Prints well, no supports, no troubles, just download and print 4.…
This wallmount is for Explorer SS controller from Logic 3, designed for the Sega Saturn. It's probably compatible with the Explorer SA and maybe original Saturn controllers but I haven't tested that. See my design list for wallmounts for…
This is a speaker corner wall mount for Klipsch RP 140 SA. I used PETG with 2 perimeter.
Perfect for saving shelf space and creating a professional 3D gallery of your brick models. If you have any questions or recommendations please write in the comments. Features: Perfect Fit: Specifically designed for the WANGE SR-71.…
I designed a wallmounted cupholder. It can handle glasses, bottles oder cups up to 89mm. (inner diameter 90mm) The wall has a hight of 62mm, the holes for the screws are 5mm. At the bottom I made some holes as draining for rainwater. The…
A Wallmount for the huge Ship: I printed it in PLA but had to use an angle out of metal for support, so you should use at least PETG and 25% filling. Before you assemble the Raptor Class it is best to only use the parts of the belly to…
Print as is oriented, supports only under snaps.
Wallmount hooks fitting for a Lechuza Balconissima For added strength I printed them lying on their side with 5 walls.
This is a simple casing for the Guiton 4” 480x480 ESP32-S3-4848S040 Smart Display. The display fits just right with additional space at the back to place battery. The USB C connector is still reachable for easy charging.
A wall mount for the Braun shaver cleaning station.
I made a new vesion of the enclosure from Marco64 to mount the enclsoure on a wall. I also changed the PG7 entry to PG7 & PG9 threaded entries. Because of the PG9 I had to chnage the lid a little bit.
Wallmount for 48v power adapter ZXD-48150. Two countersunk holes. The adapter is 127mm x 57.5mm x 33.5mm. The full name of the power supply adapter is: DC 48V 1A 1.5A 2A 48W 96W POE Power Supply Adapter 48 Volt For CCTV Security…
This wallmount is actually for a 100% homebuilt game controller that is compatible with the common Atari 9-pin joystick format of the 80s and 90s. In other words many Commodore, Atari, SEGA, Sinclair, MSX etc systems of the era. I've…
This wallmount is for standard Dreamcast controllers. See my design list for wallmounts for other controllers Cable area behind the controller. You can either wrap the cable around the holder, or use a cable tie and just insert the bundle…
These wallmounts are for the AvenuePad3 controller and the controller Multiplexor for the PC Engine / Core GrafX. It may be compatible with other AvenuePads but that has not been tested. See my design list for wallmounts for other…
screw in wall mount with spacer for flat object 2mm thick. spacer is 15mm hole for screw is 5mm plate thickness 2mm I printed 3 for mounting a round 60cm steel plate to a wall outside. I didn't want to drill holes trough the plate as that…
This two-part wall mount is specifically designed for the Oral-B iO 9 electric toothbrush, offering a clean and practical storage solution for your bathroom. The design securely holds the toothbrush in place while keeping it easily…
I wanted to have an easy to access storage for my screwbits close to the workbench. Since I couldn't find anything in existing models, I designed this myself in openscad. you can change almost anything in the dimensions, but mainly you…
Mount your Vanmoof S2/S3 charger to the wall with this nice and sturdy wallmount. Printing Either use the prepared G-Code to print on a Prusa MK3s or create G-Code for your own printer using the following recommended settings: Nozzle Dia:…
Printing settings: Material - PETG/ABS Nozzle - 0.4 mm Layer height - 0.2 mm Top, bottom wall, side walls - 3 mm Infill - 15% Print speed - 100 mm/s Print Settings Rafts: Yes Supports: No
Simple Holder for a Raspberry pi 3/4/5 with a passive / active Aluminium Case to mount the pi with some backspacing to a Wall for better airflow / cooling. You can use it to mount you Pi on Aluminium Extrusions (2020,2040,4040,….)of your…
Something to safely wall mount my spare Makita 12v Charger DC10SB using command strips in a more handy location. Includes files for both sets of mounting holes, short with the cord at the bottom. And long with the cord at the side. Note:…
I designed this wallmount for the galaxy tab a7 quite a while back. I could not find a wallmount that I liked so I came up with this design. It allows flush mounting of the tablet on a wall and it features an integrated USB-C charging…
Wandhalterung für das Ladegerät vom Audi E-Tron. Ladegerät kann entfernt werden, ohne die Halterung zu lösen. Kein Support notwendig, keine speziellen Druckeigenschaften notwendig. Wall mount for the charger from the Audi E-Tron. Charger…
a remix for wallmounting the USB holder
I made this Wallmount for the iPad 7th gen. Should also fit 8th and 9th gen I made the fitment a bit tight so nobody could just pull it out. (still possible with force but be careful)
You need two M4 bolts! Printing: Infill: 40% or more Layer Hight: 0.2
Something to hold my General No.1201 Metal Ruler nearby when not in use. Small lip to aid with positioning during storage of ruler. Attach with Command Strips or two screws 100mm o/c. 10mm x 3mm magnets.
I've had this mount in use for close to 3 years now and has worked perfectly.
I modyfied Teddyminator's wallmount to fit the existing wall hole distance and mounting hight of my old router. The part that is screwed into the router is unchanged, only the wall mount is slimer and has other dimensions. Hole distance:…
There was recently a promotion at a discount store for a set of Parkway screwdrivers. To make sure they find their place on my Ikea Skadis wall, I created these two holders, which provide enough space for the slotted screwdrivers and…
This was my first Tinkercad design. No centered holes, no rounded Edges ;) But it does the job and keeps the ship at the wall
I love to make useful 3D Desgins, and i love Coffee: Buy me a Coffee: https://www.buymeacoffee.com/phitscho Or Twint me something over 078 713 68 61 THANKS! Dronewallmount Fits 2" - 8" Drones Flexible mountingdistance Easy and fast print…
This simple print will let you mount your UM780 XTX to a wall etc. It is open where needed for ports and vents I've printed mine in PETG, 0,2mm Quality preset. 4mm holes, 69mm apart Unlike my previous model for UM690, I've made this model…
Wallmount for mount camera to corner for wider visible range. You can see more then 180°. Fitting dimensions for camera: Holder is in 2 versions: 1. Complete one part. 2. holder divided to 2 parts and connected by M8 or M10 rood.
This is a template that can be used when mounting the Vinyl Roll Holder and give it a 2 inch spacing. Speeds up installation time, keeping the mounts level and in line with each other.
This is a screwdriver bit-holder designed for keeping the bits from falling out. Because of the tolerances of different bits and the 3D-printer itself, it is nearly impossible to make a simple hole that on the one hand securely holds the…
as always, some measures in the pics so you can check if your tool fits if its from another brand.
as always, some measures in the pics so you can check if your tool fits if its from another brand.
I wanted to have a wall mount for my Japanese chisels. This worked wonderfully. Infill 20% Support: no Recommended material: PETG, ABS or ASA I wanted to have a wall mount for my Japanese chisels. This worked wonderfully. Infill 20%…
Wandhalter passend für Klingen- und Nadelboxen von Sharpak. Printer: Ultimaker S3E Material: PLA Infill: 100% Layerhight: 0,2
A small Wallmount I made to mount my calendar to a wall. You apply double-sided tape to the backside and stick the mount to the wall. Ein kleiner Wandhalterung den ich entworfen habe um meinen Kalender an der Wand zu befestigen. Du…
This is a simple wallmounted spoolholder. I use min inside my Besta enclosure
Printed on its back for a faster print. Supports recommended.
A hidden wallmount providing ample space to route cables behind the thing you are mounting. The measurements are : 100mm long x 50mm wide x 13mm thick Wallmount.Female has to be mounted against the wall while Wallmount.Male screws into…
A 200x202x65mm wall mounted shelf, dose not need supports
