Wyniki wyszukiwania: war

Star Wars BD-1 Droid Kit Card 1.0

NOTE: The new version linked below has much improved clips which are less visible than this version. NEW IMPROVED VERSION AVAILABLE HERE!!…

*~ Fully Printable ~* Butterfly Knife Balisong Design - CyberPunk Arasaka Remix Hardware Included In Print Files

Darth Vader Bust - Star Wars

Made possible by my amazing Patreon supporters! If you like my work and want more models you can support me in Patreon Darth Vader is a fictional character in the Star Wars franchise. The character is the primary antagonist in the…

R2D2 - Star Wars Home Decor

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.16-0.2mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed

Star Wars X-Wing

Replica of a T65 X-Wing Starfighter at 1:270 scale. Dimensions Length Width Height 1:270 scale 47mm 42mm 18mm The standard version is “t65_x_wing_print-in-place.stl”. The wings are print-in-place and can move ~30°. They are printed at…

Grogu (Baby Yoda) - Star Wars Pot Plant

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Millennium Falcon 3d model StarWars

Millennium Falcon Scale 1:500

Millennium Falcon Star Wars - Christmas Ornament

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.2-0.28mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Starwars deathstar lithophane lamp

A lamp with a lithopane of the deathstar from starwars This is a remix of the "Designer lithophane moon lamp", it use the same stand or adapter. Print instructions Deathstar Infill: 100 % or solid 4-5 perimeters Layer: 0,2 mm Supports:…

Star Wars TIE Fighter

Replica of a TIE/LN fighter at 1:270 scale. Its 26.8mm long, 25.4mm wide and 33.1mm tall. For a stand/holder, its compatible with a small pin, peg and base from here . Rebels Variant The Rebels Variant is based on its appearance in the…

Detailed AT-AT from Star Wars Scale 1:75

This is latest model I have created. This detailed AT-AT from Star Wars has 15 points of articulation and show cases the interior of the machine. It consists of almost 70 parts and can be assembled without glue. The head and body had a M5…

Adjustable Stand for Smartphones, Ipads, and Tablets :: 100% Printable :: No Hardware

Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…

Stormtrooper First Order TFA Helmet | Screen-Accurate Star Wars Cosplay Prop

Stormtooper First Order The Force Aweakens helm weareble the 3mf files are prepared for multicolorprint the holder for the helmet inlays can be deleted in prusaslicer or windows 3d builder same for the speakermounts for the background…

Darth Vader Melted - Star Wars Home Decoration

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)

Darth Vader Low Poly - Star Wars Pot Plant/Pen Holder

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

More Star Wars Bathroom Humor

I printed this with the color setup for my Covid mask straps so white and black are in positions 4 and 5 respectively. I split the print vertically using the Multi-Material 2S but it could be printed by swapping filaments at the layer…

Mandalorian figure STAR WARS + Grogu

I decided to try it without support and it worked. I chose the brim around the legs for a better feel. I haven't tried it without it. In order to print successfully, it is important to have a well-aligned bed, a lower hotend temperature…

best teacher ever award

i made this for my teacher because, he is, and this is a totaly unbiased opinion, the best teacher ever, its split into 3 peices and the base and top should be printed and the name tag should be printed in silver, the 2 gold peices need…

Star Wars Resurgent Star Destroyer

The Resurgent -class is the Star Destroyer used by the First Order. It appeared in Episodes VII-IX. Ships of this class include the Finalizer , the Absolution and the Steadfast . Scale This is a model at 1:10,000 scale. It is 291.6mm…

Star Wars Outdoor Data Panel Entrance (Switch Plate)

Star Wars Outdoor Data Panel Entrance (Switch Plate) Find your decorative add ons by JG here: Star Wars Outdoor Data Panel Entrance (Switch Plate) - "Light" Add-Ons by jg | Download free STL model | Printables.com Its a bit bigger than a…

Mythosaur Skull (The Mandalorian) - Star Wars Pot Plant Set

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

R2D2 - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Garden Gnome, Dwarf

Hello, Welcome to my profile, full of models and miniatures :-) I have a Garden Gnome for you for a diorama, or just for play. Very nice figures. It is suitable for coloring. My children absolutely love it :-). Important: If the figure…

Death Star Christmas Ball Star Wars - Christmas Ornament

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Pit Droid - Star Wars Inspired - 1/4 Scale

I'm a huge fan of Star Wars and the Droids from that universe. Unfortunately, I don't have enough space for full sized models, but I do have a couple of free shelves that I have slowly been filling up with Droids and Robots from various…

Master Yoda Statue - Star Wars Home Decoration

Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

Star Wars Rebels Storm Trooper Helmet

Thanks Tony, yes I will continue to revisit my previous files, to improve on them where possible. Hopefully this will work for you now after these minor improvements ; ) Cheers Jace

BD-1 : Star Wars Droid

Star Wars Droid BD - 1 Offset and solidified to print small.

Prusa MK4S, XL (09/2024 onward), CORE One and CORE One L xLCD Knob Beauty Ring

Complete rework of my original Prusa MK4 / XL xLCD Knob Beauty Ring to work with the new injection molded parts from the MK4S, XL from 09/2024 onward, CORE One and CORE One L. Printed in Prusament PETG Prusa Orange 0.1 IS Fast Detail

Onward mighty Lego Lizard!

A remix of the amazing crocodile skink with a seat for a Lego figurine! Model is scaled to fit on a Prusa Mini. The gcode file includes a filament/color change, since everyone knows that dual color lego lizards are the mightiest of them…

Ewok Treehouse - Star Wars Pen Holder/Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Star Wars E11 Blaster Rifle

Star Wars E11 Blaster Rifle The BlasTech Industries E-11 blaster rifle , also referred to as the E-11 BlasTech Standard Imperial Sidearm , [3] the Stormtrooper Armament Blaster Rifle (BlasTech E-11) , [4] and the E-11 Military Issue…

Grogu (Baby Yoda) - Star Wars Halloween Edition

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Clone Trooper Helmet Phase 1 & 2 - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

World of Warcraft Horde Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Droid Restraining Bolt Fridge Magnet (Star Wars)

Hello there! Tired of your fridge running away only to be taken by some jawas and sold to the first scruffy-looking nerf-herder that comes their way? It seems like it's a problem that has plagued us for generations… or at least since…

Star Wars Christmas Ornament Death Star

Death Star Ornament The model comes in a big size, so you can modify it to fit your tree style or use the bottom as a bowl. It was printed in 40% and 50%, it worked great. Once the bowl print is ready I will share the results. There is a…

Hive Board Game - Swarm bugs design

Remix of the Hive Game Derivative “Swarm” pieces available on Thingiverse. I changed the thickness of the bugs (7 mm) and the depth of the bug shape (1 mm). I also modeled the bugs without the piece, if you want to create/edit a model…

Star Wars Kom'rk/Gauntlet Fighter

The Kom'rk Fighter ("Kom'rk" means “Gauntlet” in Mando'a) is a mandalorian ship. Although calling ship thats over 50m long a “fighter” is a bit of a stretch. It seems to be mostly used as a transport/dropship, but you can also see a fleet…

Lego Star Wars kama and pauldron

Since Lego seemingly has stoped producing kamas I decided to take it into my own hands and designd my own for printing so everybody can have the happines of having driped out clonetroopers ! The kama The kama is designd to be printed in…

Chopper: Star Wars Rebels

Chopper: Star Wars Rebels Updated (Fixed arms with .4 selective offset 10/10/2023) Thanks TrippleGWorkshop for the keen eye!!

Star Wars Full Size R2D2 Planter Vase

Star Wars R2D2 Planter Vase. Can we resized to any size that you like. Could also be sized to use as Pencil or Pen Holder or Candy Dish or Bowl. There is a small hole in the center of the planter to allow for water to not fill it up. I…

Tatooine (Luke Skywalker's home) - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

AT-ST - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file)

AT-AT - Star Wars Planter

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Star Wars TIE Defender (Canon/Legends Versions)

Replica of the TIE/d Defender from Star Wars. It comes in two versions. The canon version is based on its depiction in Rebels, the other version is based on its (most common) depiction in Legends. The only difference between the canon and…

Warning - Cat Attack Signs

3 Basic warning signs, to alert people of impending claw doom. 3 Designs for the cats, same text. Colour layers is White->Red->Black For specific to PrusaSlicer, and the usual .2 mm layer height, the change occurs at (1.00) then (1.40)

Star Wars Interdictor

A replica of an imperial Interdictor as seen in Star Wars Rebels. Scale is 1:10,000. It's 11.3cm long, 6.7cm wide and 2.6cm tall. (Note that the “Interdictor Star Destroyer” from canon is much larger than the “Immobilizer Cruiser” from…

World of Warcraft Alliance Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 90° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

Star Wars Key Caps - Darth Vader and Stormtrooper

Remixed and combined a keycap with Star Wars Figures. I have made a FULL-BODY and a HEAD-ONLY versions. Choose what you like. Print Instructions: 0.1mm height 15% infill Supports are recommended Please share\like\add a make if you liked!

Warning signs

A series of warning signs i published on another platform a few years ago. 2 color print. Switch filament from yellow to black for the final layers. The gcode files for Prusa i3 MK3S already have the color change stop integrated. Use at…

STAR WARS Logo Lamp

***UPDATE*** Some people got problems with the original version. You need a highly accurate/calibrated printer. I've added new files with a higher gap/offset. Tested with a 0.6mm nozzle. If you struggle with the inlays, try the version…

Star Wars MK1 Starhawk

About MK1 Starhawks The Starhawk is the crown jewel of the New Republic Navy. Constructed from disassembled Star Destroyers, Starhawks exceed every standard of their time and can defeat Imperial Star Destroyers with ease. The MK1 Starhawk…

Beskar Ingot: Mandalorian: Star Wars

Beskar Ingot: Mandalorian: Star Wars Print standing upright for best details. Textured on all sides.

A fully parametric strong wardrobe rail bracket for a cylindrical rail (fits Ikea Hjalpa)

edit: now the parametric file is included! read instructions at the bottom to learn how to use it After the original bracket in my Ikea wardrobe broke I made a stronger replacement. It's also more convenient to use, because the rail can…

Skimmer basket Hayward SP-1082

Assembling: Put the bottom grid into the skimmer basket tube. There are 4 latches at the end of the tube. Material: PETG Nozzle: 0.4 Layers: 0.3 mm Infill: 50 % Skimmer basket tube: Skirt height: 20 layers Loops: 2 Brim: inside and…

General Grievous - Star Wars Wall Planter

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file) Scale it as you like :)

lego star wars super battle droid B2 x400

Layer height: 0.15 Initial Layer Height: 0.4 How to get great quality: Legs and arms must be printed vertically (Be careful to not F*ck up with Z axis) Slow the printing process (I did on 120mm/s) Tree support is a must 10% infill 65°…

B2EMO : Andor : Star Wars Droid

B2EMO : Andor : Star Wars Droid. This has been available for a few years now -→ buried as an add on option in another model of mine. Hilarious. I spent 20 minutes looking for it thinking that It was posted as a stand-alone. Nope.

Game Awards Trophy

0.25 mm, Infill 25%, Support overhang angle 60

star wars coasters

star wars coasters including rebel, empire, falcon and fett

Hardworking dwarfs, gnomes for the garden

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important: If by chance the…

Star Wars Millenium Falcon keychain with shopping cart token

Fan of the Millenium Falcon, I've already designed this keychain but this one include a shopping cart token . It is 6.5 mm height and 45 mm lenght. The print is in 3 parts : millenium falcon keychain token corresponding to 1 euro coin to…

Wargame Building Terrain - Stand Alone Building - Group Three!

Wargame Building Terrain - Stand Alone Building - Group Three! Complex stand alone building with floor! Complex stand alone building with floor and slide in door! Complex stand alone building with No floor! The empires of the future won't…

Star Wars New Republic Defender-class Cruiser

This is a model of the New Republic Defender-class Cruiser which appeared in the show Star Wars: Ahsoka. One ship of this type was called Vesper . Dimensions Length Width Height 99.6mm 19.5mm 16.4mm The scale is 10,000. Included is a…

Grogu (Baby Yoda) Star Wars - Christmas Ornament

Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

VESA adapter for DELL Alienware AW3423DW

I'm switching to a standing desk and bought a mount to hold my monitor and other accessories off the table. I either threw away the original adapter or my monitor didn't come with it, so I searched online for options to purchase. The only…

Star Wars TIE Striker

A replica of the TIE/sk Striker from Rogue One. It has movable print-in-place wings. The scale is at 1:270 with a length of 63.6mm and a wingspan of 43mm. (The hinges are 2mm in diameter.) Holder uses a small base and slanted pin from…

Knights on Horses Kingdom Come, War Horse

Hello, Welcome to my profile, full of models and miniatures :-) I have for you Knights on Horses from the game Kingdom Come: Deliverance 2 for a diorama, or just for playing. Very nice characters. It is suitable for coloring. My children…

Star Wars Rebel and Empire Symbol Bookmarks

These small easy to print bookmarks are the perfect gift for the Star Wars reader in your life. They are also a great way to use up the end of a spool since they take less than half a meter of filament each. A card is included for gifting…

GNK Droid - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Star Wars Finns Blaster Glie44

This is a blaster from the new Star Wars movies with Finn and Poe Dameron. They both used a new Rebel-Blaster like this. It was designed by me in Onshape and has many separate parts. The base part is available as one part or as a splitted…

Warning stupid sign

Just a sign for a friend for his office.

Engine Temperature Warning Light Keychain

keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 36mm x 29mm 6mm Keyring hole

Starwars KeyChain

I put 100%infill for the best strength.

Star Wars Onyx Cinder

The Onyx Cinder appeared in Star Wars: Skeleton Crew. This model includes both version of the ship - the sleek republic emissary ship and the armored pirate cruiser. The wings and turrets are movable. Comes with an articulated stand. The…

3D Printer Warning Sign

The original needed some tweaking to print in the proper orientation with some resizing to use less filament and print in far less time.

Edward's watch (Fullmetal Alchemist)

This is an attempt of Edward's pocket watch design. Thank you for being indulgent, I am discovering Fusion 360 xD Printing with Smartfil filament. Print instructions Layer: 0.05mm Infill: 10% Support: yes

Baby Yoda (Grogu) Crib Hover - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)

Electrical warning sign

warning sign created for the purpose of safety and to warn of possible dangers. By Mishman118….Inventor2022

Lego Star Wars Minifigure Display Hexagons - 55 Accurate Factions

The most meticulously organized Lego Star Wars collection A complete list of 55 Star wars factions available to download: At Attin Black Sun Bondsman's Guild/Bounty Hunters Churches of the Force CIS Separatists Clan Djarin Clan Fett…

The Ghoul's Revolver - Fallout Show (Cooper Howard)

Star Wars Death Star Wall Diorama

Death Star Wall Diorama for 3 ¾ action figures. Assembly instructions: Print the parts (0.2mm) ( no supports needed! ) Cut out a piece of white paper (size: 105mm x 55mm ) Put the paper into the back of the front panel Snap the back panel…

R4-D5 : Star Wars Droid

R4-D5 : Star Wars Droid

Endor Bunker - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Star Wars BD-1 Droid Kit Card Individual parts

Bonjour, vous trouverez les 22 pièces du robot BD-1 en 22 fichiers séparés pour une impression en plus grand ou pour juste imprimer une pièce à la fois modèle original Star Wars BD-1 Droid Kit Card Hello, you will find the 22 parts of the…

Prusa Mini USB extension snap fit mount (no hardware required)

I was inspired by Mr.Baham to make a USB mount that didn't require any hardware. This mount will snap fit into the 3030 extrusion. It works best if you stick one side in and lever it into place (it's a tight fit). You will need a USB male…

B1 Battle Droid - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Brim (Recommended) Supports needed Scale it as you like :)

Star Wars Jedi Vector

“The Vectors were as minimally designed as a starship could be. Little shielding, almost no weaponry, very little computer assistance. The Jedi were the shielding, the weaponry, the minds that calculated what the vessel could achieve and…

World of Warcraft Logo Magnet

You can glue a 10 x 1.5 mm round magnet in the base. Print instructions Recommended infill angle: 0° Low speed and high temperature will create a shiny top surface. There are "holes" inside the model to make some of the top layers more…

X-Wing Fighter - Star Wars Pot Plant

Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)

Star Wars First Order Light Cruiser

The First Order Light Cruiser can often be seen docked at the nose of First Order Star Destroyers. It is 211,2m long, has four turrets and can carry 24 Tie Fighters and 1 Shuttle. UPDATE: Added 1:500 Scale Version Appearances in Star Wars…

BB-9E : Star Wars Droid

BB-9E : Star Wars Droid

ABS Warning Light Keychain

keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 31mm x 30mm 6mm Keyring hole

U-Wing : Star Wars

U-Wing : Star Wars

Jedi Temple - Star Wars Home Decoration

Any feedback would be greatly appreciated . Add a frame so looks better Nozzle: 0.4mm Layer: 0.08-0.24mm (Recommended) No Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)

StarWars Keychain StormTrooper

Très jolie porte clés d'un stormtrooper Epaisseur max 5mm Epaisseur min 3.5mm Changement de couleur déjà configuré dans prusa slicer si vous prenez le gcode Imprimer avec un remplissage maximum pour qu'il puisse durer dans le temps.

Miniature War- and Skirmish gaming Objective Marker

Miniature War- and Skirmish gaming Objective Marker for 40 mm Markers with a 1, 2 and 3 inch distance display. Printed with only two layers makes it strong and flexible. There is also a Miniature War- and Skirmish gaming Control Range…

Original Prusa XL Skeletton Dwarf Cover Back

Ich habe das Originale Dwarf Cover Back etwas abgeändert, sodass es etwas leichter ist, und die Wärme besser entweichen kann. Mir gefällt auch die Optik besser. Ich habe durch den leichten Gewichtsverlust keine negativen Veränderungen am…

Star Wars bookmark Venator

Bookmark with Venator starship. It's the best idea to print it on 0,05mm layer height. Better don't print it with dark colours, because you may couldn't see details. It's my own project, but i got inspired by this model:…