Wyniki wyszukiwania: wav

Sortowanie

3174 modeli

P
PrintablesSabre Design

Modern Wavy Vase

Modern Wavy Vase Added files for vasemode and a solid wall version. If you want to support me or get a commercial license for this model, you can join a patreon membership: https://www.patreon.com/SabreDesign Check out more of my designs…

Pobrania
10 510
Polubienia
2351
Ocena
5
P
Printables3DPrintBunny

Pendulum Wave Toy with 3 pendula sets

A Pendulum Wave. Beautiful to watch. See it in action in the attached video. It comes with three sets of Pendula and a pusher which slots into the base. To assemble put an end cap onto the post and then all the pendula with spacers…

Pobrania
4423
Polubienia
2284
Ocena
4,7
P
Printablesmichelegz

Silica gel container - Fast Print - Wavy surface

I really liked the original model by @gdrag and the idea of @Lorro to use a wavy mesh. So I combined the two to get a smooth external surface with the wavy mesh. It prints faster avoiding retractions and with less vibrations. The bottom…

Pobrania
1598
Polubienia
205
Ocena
4,97
P
PrintablesSavageRodent

Leatherman Wave Holster - Delux

This is a Remix of Comfortable Leatherman Wave belt holster by WaveSupportApparatus. Mostly the changes are of a cosmetic nature i.e. I've tarted it up a bit by rounding some of the hard edges. I've also engraved the words " Leatherman…

Pobrania
1183
Polubienia
190
Ocena
4,93
P
PrintablesMW

Adjustable Wireless charging dock / Ikea Livboj / Powerwave / Anker / Nillkin

This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…

Pobrania
923
Polubienia
141
Ocena
4,87
P
PrintablesjonnieZG

Microwave Oven Turntable Coupler

Use PA (nylon), PC or some other temperature-resistant filament. Do not use PLA, or carbon-infused filament, as it is likely to heat up because of its conductivity. Printed at 0.20m QUALITY settings with 40% infill.

Pobrania
680
Polubienia
47
Ocena
5
P
PrintablesM4NU

Kinetic wave for your Benchy

This fully printed mechanical wave will allow you to sail your favorite Benchy. Most automata of kinetic wave are linear. I inspired from these to create this circular version. The mechanism is pretty simple : the first wheel hold the…

Pobrania
661
Polubienia
634
Ocena
4,5
P
PrintablesJFdL

Case for a Raspberry Pi 4b + Waveshare POE HAT B or C

Cases for Raspberry Pi 4B with POE Hat from Waveshare. PoE HAT B with OLED screen or C without the screen. Bottom and top cases snap together without the need of screws and/or nuts https://www.waveshare.com/poe-hat-b.htm…

Pobrania
538
Polubienia
38
Ocena
5
P
PrintablesShuto

Coffee Filter Holder (for wave type)

A simple coffee filter holder. Holds more than 100 Kalita wave filters. Print Settings Printer: Prusa i3 MK3S+ Rafts: Doesn't Matter Supports: No Infill: 15~20% Layer Height: 0.20~0.30mm Use the "Variable Layer Height" function if you…

Pobrania
535
Polubienia
87
Ocena
4,25
P
PrintablesFC2M3D

Frog Waving Keychain

Easy to make a Frog waving keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Pobrania
498
Polubienia
89
Ocena
4,5
P
PrintablesDarthDeezy

The Great Wave off Kanagawa Lithophane

High quality lithophane of the famous painting “The Great Wave off Kanagawa." Built-in arc to allow for printing vertically for best quality. Print at 0.16mm layer height, 99% rectilinear infill, 12 vertical shells, keep print speeds low…

Pobrania
395
Polubienia
96
Ocena
5
P
PrintablesDazus K

Wavy Kaleidoscope Easter Egg

This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed…

Pobrania
344
Polubienia
79
Ocena
5
P
PrintablesFC2M3D

"I Love You" Soundwave Keychain #1

I printed in PLA Infill: 15% Layer Height: 0.20mm Variable Height: Change height from 2.8 layer to the end to 0.1mm Supports: No Check other Valentine keychains https://www.printables.com/model/1162970-my-sexy-valentine-keychain…

Pobrania
340
Polubienia
47
Ocena
4,5
P
PrintablesMrFlippant

Transformers Decepticon Soundwave Bobblehead

Bobble the head of your favorite Decepticon Communications officer! Get the spring and base of your choice from the original bobblehead print by 3DPrinty, or use my 3MF or provided gcode. This model includes a remix, with permission, of…

Pobrania
293
Polubienia
61
Ocena
5
P
PrintablesVastasStudio

Wave Shelf

A shelf inspired by the shape of waves for storing towels. Dimensions of the shelf (LxWxH) 220mm x 102mm x 10mm Height for doble-sided tape 17mm Material PETG or Any Mounting: Add pieces of 10mm double-sided tape ( 3M tape recommended )…

Pobrania
208
Polubienia
154
Ocena
5
P
Printablescomartist

BMW F10 / F11 Phone Holder Anker PowerWave (Samsung S20 Plus with Spigen case)

I had an Anker PowerWave wireless charger A2503 lying around that I didn't need. That's why I developed this phone holder for my BMW F11 and Samsung S20 Plus in a Spigen Tough Armor case. I like the inductive charging. So the wireless…

Pobrania
175
Polubienia
35
Ocena
4
P
PrintablesMetikumi

Classic Curved Flower Pot with Wavy Decorative Lines in four Heights

This classic curved flower pot takes inspiration from the wide, elegant shapes of Roman vases, adding a unique twist with its wavy decorative lines. These lines artfully wrap around the vase, echoing its curves from the rim to the bottom.…

Pobrania
152
Polubienia
60
Ocena
5
P
PrintablesHieros Lokhos

Sonoff SNZB-06P mmwave sensor flat cover

I've purchased a couple Sonoff SNZB-06P mmwave Zigbee sensors, but I didn't like that the size of the sensor was so large with the magnetic base. So I designed this back cover to make the device much smaller. It is possible to stick it…

Pobrania
139
Polubienia
19
Ocena
0
P
PrintablesLeopoldMozart

Honey Dipper - A Wave Overhangs Test Model

Honey Dipper* - A Wave Overhangs Test Print *Not actually intended to be dipped in honey. This is a test print I made to try the Wave Overhangs fork of Orca Slicer. When sliced correctly, the model should print without supports . Print…

Pobrania
134
Polubienia
8
Ocena
0
P
PrintablesNoah Clemmensen

Wavey coasters

Some coaster designs perfect for anything you need a cover under. Should it be a mug, a hot plate or anything else. They are simple flat designs just extruded upwards so no supports are needed. If you are having trouble getting the small…

Pobrania
129
Polubienia
29
Ocena
4
P
PrintablesNaheulbeurk

kanagawa wave benchy (no-MMU)

Bonjour. Je vous présente mon interprétation de la vague de Kanagawa. Avec l'ajout d'un benchy, inspiré d'un modéle de Satyr. Je l'ai entièrement retravaillé et colorisé pour une impression sans MMU avec un changement de couleur toutes…

Pobrania
129
Polubienia
106
Ocena
4
P
PrintablesDrew Commins

Waveshare HDMI to CSI adapter case

This 2-part case is designed for the Waveshare HDMI to CSI adapter card. This card is used to convert the video signal from an HDMI device to the CSI connector on a Raspberry Pi. It can be used to interface HDMI webcams (like a GoPro) to…

Pobrania
125
Polubienia
9
Ocena
0

Wavy Phone Stand

A simple stand for your phone with nice looking curves

Pobrania
124
Polubienia
11
Ocena
4
P
PrintablesDanB

WaveShare 2.7 NFC Data Range Case

Holds a WaveShare 2.7" NFC card that is used as a Data Range Card. Data is transferred from Strelok Pro Ballistic Calculator to the WaveShare card via NFC. Displays the distance, elevation and windage. Hardware Required: (4) 3mm x 6mm…

Pobrania
121
Polubienia
8
Ocena
4,5
P
PrintablesUloPe

Waveshare 7.9" touch display mount for Voron 0.2

This is a mount to attach the Waveshare 7.9" capacitive touch display to the front of a Voron 0.2 (it may also work for the 0.1 or 0 but since I don't have those I can't confirm that). The mount points are designed so that they don't…

Pobrania
120
Polubienia
20
Ocena
0
P
PrintablesHarashi

Kanagawa Wavepattern coaster Multicolor prusa xl 5 heads/2 heads

Printed with 5x PLA. If you want to use it with less heads take the .3mf file and change it to your liking. Print time is very short on the Prusa XL (<90 min).

Pobrania
110
Polubienia
46
Ocena
5
P
PrintablesFilgy

Beer Nukatap tap handle with Waveshare 2.7" e-ink display

Inspired by: https://www.printables.com/model/121432-e-paper-display-tap-handle https://www.printables.com/model/268334-eink-tap-handle

Pobrania
104
Polubienia
15
Ocena
5
P
PrintablesMaximus Marquez

Waving Jelly Fish

This jellyfish model has movable arms that go side to side almost like it s waving hence the name Waving Jelly Fish.

Pobrania
94
Polubienia
23
Ocena
0
P
PrintablesUloPe

AirPods Pro stand for Anker PowerWave Qi charger

The AirPods Pro support wireless Qi charging. Unfortunately the Anker PowerWave chargers while very nice for phones have their charging coils in the upper half of the angled backrest - out of reach for the AirPods Pro case. This is a…

Pobrania
81
Polubienia
2
Ocena
0
P
PrintablesDanAndersen

Waveshare CM4-NANO-B baseboard frame for Voron DIN-Rails

Raspberry Pi 4 are hard to source. Using Raspberry CM4 modules together with a cheap baseboard can be a performant and compatible alternative. The CM4-Nano baseboards are sub 20 euro, so they fit well. This is a relatively simple mount…

Pobrania
73
Polubienia
5
Ocena
0
P
PrintablesLorenzo Fassina

Feet risers for microwave Candy EGO-G25DCS

These are some simple feet risers to rise your Candy EGO-G25DCS microwave oven. Print instructions Material PLA Resolution 150 Supports No Brim No

Pobrania
56
Polubienia
2
Ocena
0
P
Printablesa3a3a3a3

SKADIS motion detector mount for tuya PIR/mmWave Zigbee/WiFi presence sensor

A vertical mount for a cheap tuya zigbee or wifi PIR (passive infrared)/mmWave motion presence sensor I found on AliExpress that is compatible with the IKEA SKADIS pegboard system. I printed it vertically with tree supports for the hooks.…

Pobrania
54
Polubienia
9
Ocena
5
P
PrintablesHighTechRedNeck

Leatherman Wave Holder Remixed

The original design was great, IS great, but over time when printed in petg the sides start to warp apart. They also catch on things at the worst times possible. SO. I've remixed the design to tighten up the belt loop just a touch, and…

Pobrania
45
Polubienia
7
Ocena
5
P
Printablesdtxtr

Prusa Slicer Fuzzy Skin Sample Card - WAVY

This is a remix of a sample card for fuzzy skin settings with more geometric features. Presliced files for Prusa Mini+ and MK4S.

Pobrania
43
Polubienia
5
Ocena
5
P

Coupling for microwave oven TEKA ML820BIS

Coupling for microwave oven TEKA ML820BIS. The coupling on my microwave oven broke (it split where the motor

Pobrania
42
Polubienia
3
Ocena
0

Waveshare 4,3" DSI display mount & cover

Cover for Waveshare 4,3" DSI Display(such as this one) and mount for Articulating Raspberry Pi camera mount system. Cover is bends into place with live hinges(sides first, top and bottom to lock it into place, M2,5 screws to secure it)…

Pobrania
36
Polubienia
2
Ocena
0
P
Printableswno158

Case for Waveshare Passive 2.7" ePaper Display

Small case for this nice display . It may be a little tight, I had to sand down the PCB by a few tenths of a millimeter all around. I replaced the spacers provided by Waveshare by plastic ones with M3 thread and used a nut to fix it. When…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesStayBukaj

Design flowerpot - smooth wave

Print 0,4mm nozzle and 0,25mm or 0,3mm layer. PLA is good for inside flowerpot, for outside flowerpots is better PETG. . . . . . . . . Powered by MakerWorld-Make My Vase ( https://makerworld.com/makerlab/makeMyVase )

Pobrania
30
Polubienia
7
Ocena
0
P
PrintablesAndreiVN

Wave-Particle 2in1

Wave-Particle 2in1

Pobrania
28
Polubienia
5
Ocena
0
P
PrintablesDe3DPrintman

Fuzzy Wavy Vase One

I tried to design a couple of vases and this one looked great after I printed it on my Prusa i3 MK3S+ so why not share it with you right!? You love it or you hate it but I kinda like that low poly look on this one. I was a bit afraid that…

Pobrania
26
Polubienia
6
Ocena
0
P
PrintablesTeraflop

Lightwave Flashlight Replacement Part

This replaces an older Lightwave flashlight part that has a button and holds the LEDs. The original part was cracked. This happened on three flashlights. With these new parts, three flashlights have been restored. The original electronics…

Pobrania
26
Polubienia
1
Ocena
0
P
PrintablesFloralCoal

OnstepX Strainwave mount (harmonic drive) - working prototype*

*WIP* working prototype Its working well but I want to polish it more. Suggestions welcome I wanted to get a Strainwave mount to use my C8 and replace the AzGti that was overloaded. After finding the Astrophilo project I decided to build…

Pobrania
24
Polubienia
4
Ocena
0
P
Printablesmiremaker

1/4" TS Instrument Cable Holder (fits Planet Waves and Ernieball)

It fits the following as I have tested on my own... D'Addario/Planet Waves cables with the Geo-tips Ernie Ball Users report it also fits the following... Some Fender cables (see user comments)

Pobrania
24
Polubienia
7
Ocena
5
P
Printablesspuder

Waveshare Raspberry Pi Compute Module Case Lid

3D printable Lid for the Waveshare POE adapter board I have a CM-10-POE-Box, however I lost the lid. Included are 2 designs: 1. Plain 2. Home Assistant Fusion 360 design file included for easy modification. The Home Assistant model…

Pobrania
20
Polubienia
7
Ocena
0
P
Printablespipersw

WaveShare 5" DSI for PrusaBox, with X735 PSU shield

This is an option to mount the WaveShare 5" DSI Display and a PI4 with a X735 shield ( https://geekworm.com/products/raspberry-pi-x735-safe-shutdown-auto-cooling-expansion-board ) onto the Prusa-Box from https://www.printer-box.com . Add…

Pobrania
20
Polubienia
7
Ocena
0
P
Printablesbartkodden

Plast1 wave basket baby size tags

Size tags for plast1 wave baskets ( https://www.plast1.eu/assortment/1/8 ) Found in the store Action in the Netherlands. I printed it with a color change after 0.8 mm. To be fastened with at least 1 M4 bolt (max 5mm long)

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesLaurenz

Stackable Prusa LCD and Waveshare 5" display cover

Two separate covers for the origin Prusa MK3+ LCD and the Waveshare 5" LCD. Both covers can by stacked for easy storage. It can be printed easily and without support.

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesAlex

Holder_modified_Anker_PowerWave_magneticPadLite

Modified the Holder to fit my wireless charging puck from a Anker

Pobrania
16
Polubienia
1
Ocena
0
P
Printablesmscalora

Vase 90 - Sine Wave Profile - Modern

Used a sine wave to create the profile of this vase. Straight neck modern look. Both shelled to 2mm and solid version (for vase mode) Fusion 360 CAD file included, adjust frequency, amplitude, offset, height, width, thickness, etc Example…

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesPatrik

IKEA Microwave padding bit

I glued the ventilation grid parts together, but that is probably not necessary. The fasteners for the frame uses the predrilled shelf attachment holes in the IKEA cabinet. I've added double 1 cm x 2mm magnets to the fasteners and the…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesOldCoder

Escutcheon and Grommet for Pepwave mimo antenna wires

Escutcheon and Grommet to tidy up hole and antenna wires from Pepwave mimo antenna I mounted on our RV

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesREMLURELMI

Microwave Rules Sign

Recommended print settings: Material: PLA/PETG Layer Height: 0.20 Infill % : 15 Supports: No Print Orientation: As modeled

Pobrania
11
Polubienia
2
Ocena
0
P
PrintablesZdeněk

Raspberry Pi vs. Waveshare e-Paper HAT soldering template

Introduction You may find yourself needing to connect a waveshare device with a raspberry pi that has no GPIO header, like my Zero 2 W (as opposed to Zero 2 WH, which has the header). You don't need a full 40-pin header. Just fit the few…

Pobrania
8
Polubienia
2
Ocena
0

NightVision - Raspberry Pi zero + Waveshare parts

Small night vision built from RPI zero and accessories from Waveshare. Dimensions only: 12x6x5cm You need: RPi ZERO (with hat) (16 USD) MicroSD (8GB or more) (6 USD) Cam + light - buy cable for zero! (29 USD) Round LCD (15 USD) Battery…

Pobrania
3
Polubienia
2
Ocena
0
P
PrintablesSNASA

Wavy Pencil Holder - Vase mode

This model is design to be printed using a 0.6mm nozzle (0.4mm should be fine) in vase mode. The print above is made from Prusament PLA Gentleman Grey Recommended settings - Material : PLA / PETG - Vase mode - Layer height : 0.2 - 0.4 mm…

Pobrania
23 219
Polubienia
3888
Ocena
4,96
P
Printablesomgwtflolbbq

Lithophane Moon Lamp with Wavy Stand

I had adjusted/remixed this model to max out the settings on an AnkerMake M5 Printer. The lamp itself couldn't be any bigger due to the constraints of the printer, but it's still just about the perfect size. The adapter for the lamp was…

Pobrania
14 642
Polubienia
2461
Ocena
4,91
P
Printablesandyroo770

Print-in-place, Wavy design Box

Print 3+ perimeters, ~24%+ infill. file sizes now smaller **added plain, untextured version and version with no text.

Pobrania
12 441
Polubienia
2434
Ocena
4,95
P
PrintablesManux

Waving Groot

Print Time 91 Hours. 20 cm height 0.4 nozzle. Easywood Coconut filament 0.15 layer height Slicer layers used to set more quality. Easywood feels like real wood and it even smells like it :-) Very cool filament. Got the model from Byambaa…

Pobrania
10 121
Polubienia
1073
Ocena
4,94
P
PrintablesMateusz Tokarz

Self-Draining Sponge Holder | Wave Drip Tray

🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…

Pobrania
10 011
Polubienia
1667
Ocena
4,85
P

great wave of kokanow

Hey everyone, first of all, it would mean a lot to me if you could download my model. It truly inspires me to create more. I make these models because I find it enjoyable, and I want to give back to all of you. All my models are…

Pobrania
7326
Polubienia
2481
Ocena
4,85
P
PrintablesJH

"Waves" Designer Lamp

Designer-Esque fully 3D-printable Vasemode Lamp Design The Lampshade and the base thread into each other for a seamless and sturdy appearance. Although it is designed to fit the Bambu Labs “LED Lamp Kit” you can easily modify the Base to…

Pobrania
7209
Polubienia
1411
Ocena
5
P
Printablesh3li0

wavy planter · wrap around plate

wavy planter with wrap-around plate modern minimalist planter design with wavy pattern that sits elevated in a wrap-around plate full dimensions in mm > x: 110 · y: 110 · z: 100 included are the profiles at full size and 85% size, for…

Pobrania
7090
Polubienia
1846
Ocena
4,95
P
Printables3D Print Life

Waverrior - 3D Shoes

Waverrior - 3D Shoes by Dhafinrezky on Thingiverse

Pobrania
6309
Polubienia
1015
Ocena
4
P
PrintablesShawn Gano

Wave Puzzle 7 (Remixed)

Remix of "Wave Puzzle 7" by ThinkingPegasis. ( https://www.thingiverse.com/thing:3739933 ) Changes and/or improvements over the original: Thicker pieces Pre-flipped a few of the tiles to not give the solver a hint based on the surface…

Pobrania
4983
Polubienia
957
Ocena
4,98
P
PrintablesSLIMPRINT

Wavy Pencil Holder (vase mode)

A Pencil Holder with a wavy texture, designed to be printed in vase mode. Print time: 1 - 2 hours at 100% scale (depending on settings) Dimensions: 6 x 9 cm (diameter x height) If you have questions, feel free to contact me. Happy…

Pobrania
4603
Polubienia
399
Ocena
4,9
P
PrintablesC3D

The Great Wave [Framed] - Bookmark

If you want to sell prints of this model, as well as all of my models - future and past Subscribe to My Patreon "The Great Wave [Framed]" captures the power and beauty of the ocean in a sleek and stylish bookmark. 🌊✨ Inspired by something…

Pobrania
4553
Polubienia
1996
Ocena
5
P
PrintablesMateusz Tokarz

Self-Draining Sponge Holder V2 | Wave Drip Tray

BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…

Pobrania
4074
Polubienia
702
Ocena
4,9
P
PrintablesDimensional

Minimalist "Dolphin on Wave" Statue

Minimalist “Dolphin on Wave” Statue This elegant statue captures a dolphin in a dynamic jumping pose, gracefully balanced as if touching the wave below. The sleek silhouette, with expressive lines of the fins and tail, harmonizes with the…

Pobrania
3735
Polubienia
522
Ocena
4,89
P
PrintablesZach Hovick

Bluey Sitting, and Standing and Waving Models

I designed Bluey in Blender. One of her sitting and one of her standing. Models require supports.

Pobrania
3606
Polubienia
211
Ocena
5
P
PrintablesMrSaiclops

Great Wave off Kanagawa

Full credit for the STL goes to 3_D_M_A on Thingiverse . I simply took the original and sliced it up with the M600 command to accommodate color changes easily. People asked for it so I'm posting it here on PrusaPrinters since the file is…

Pobrania
3577
Polubienia
1977
Ocena
5
P
PrintablesCB

Great Wave off Kanagawa - Multi-colored for AMS

This was painted in Bambu Slicer for the AMS with four colors. Rather than just painting each layer a different color, I tried to match the original print as much as possible, including painting on some details on a few layers. I painted…

Pobrania
3288
Polubienia
3070
Ocena
4,91
P
Printables3D-Dengineer

Finger Surfboard! Ride the air waves out of your car. [FlyBoard 1.0]

Version 2 now availiable!: https://www.printables.com/model/254313-finger-surfboard-car-window-finger-surfboard-flybo Have you ever put your arm out of you car window when driving fast in order to ride the waves? Now, you can take your…

Pobrania
2918
Polubienia
284
Ocena
4,81
P
PrintablesSASSy Design

Parametric Copper Waves Plant pot and Planter - Vase mode design

A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…

Pobrania
2858
Polubienia
660
Ocena
4,96
P
PrintablesHow To Homemade

Slide Shoes | Fully 3D Printed TPU | Wavy Sole

Fully 3d printed slide shoes , remixed from MakerVerse Designs printed with TPU (I used eSun eTPU-95A Rainbow ) probably TPU 90a or so is more comfortable, but also more difficult to print My print settings: Infill: 10% Infill Pattern:…

Pobrania
2843
Polubienia
429
Ocena
4,83
P
PrintablesFernando Jerez

Wavy bowl

Hi! This is a procedurally generated shape extruded as a nice bowl. Print in spiral/vase mode Made using Processing. The geometry shows some 'glitchs' on top and bottom layer but don't worry, it can slice well. The pictures are not…

Pobrania
2583
Polubienia
400
Ocena
4,88
P
PrintablesCallan Prints

Benchy Wave

This is a stand for 3dbenchy. Print Settings Supports: No Layer Height: 0.2mm Infill Density: 20%

Pobrania
2436
Polubienia
460
Ocena
4,85
P
Printablesmaggoh

Presence Sensor Case - ESP32 C3 Super Mini + LD2410C Radar mmWave Sensor for smart home

Update 1: Small optimizations to the casing Added a small groove for lifting the lid Added some space inside on the back for potential cables Hello, here's a small project that I designed. I wanted to combine a small ESP32-C3 Super Mini…

Pobrania
2370
Polubienia
243
Ocena
5
P
Printablesywabiko

Waveshare 7" HDMI LCD (H) Case

(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen and auto scaling to accept up to 1920x1080 input resolution. Waveshare 7inch HDMI LCD (H) Mount…

Pobrania
2293
Polubienia
141
Ocena
5
P
PrintablesMichael R.

Wavy stand (smoother version)

This is a remix of the wavy stand with smoother edges.

Pobrania
2253
Polubienia
263
Ocena
5
P
Printables3DPrintBunny

Pendulum Wave

Pendulum Wave to build and play with - Watch the video to see it in action: I also have an instructable which tells you how to create/design the pendulum wave and how to build it after printing. Any questions? Let me know :)

Pobrania
2224
Polubienia
557
Ocena
4,73
P
PrintablesPhilip Wallin

Wave Wall Art

It's intended to have 20mm space inbetween each part. The Wave Wall Art Spacer.3mf file can be very helpful when mounting to make sure the spaces are equal. I recommend that you print 2 of the spacers so you can have on on the bottom and…

Pobrania
2222
Polubienia
1366
Ocena
4
P
Printablesboksbox

Wave Lamp

Lamp shade with a single wave design patterned around a cylinder This design includes pieces that can be used as a - Pendant Lamp using the shade as is. Ceiling Lamp using the included fitter end adaptor to attach to lamp fitters. Table…

Pobrania
2169
Polubienia
445
Ocena
5
P
PrintablesBamingo Design

Wave Coasters

A calming wave pattern, shaped into a functional coaster set. Three manual swaps — no AMS or MMU required. Print Settings: Layer height: 0.08 mm with a base layer of 0.16mm Infill: 100% Color Changes: Start with Blue (Polymaker Polylite…

Pobrania
2148
Polubienia
886
Ocena
4,91
P
PrintablesJ3d printing

wave phone holder

print this model with pla+

Pobrania
2126
Polubienia
330
Ocena
3,83
P
PrintablesMSBstudios

Wavy Dual-Bay Tea Bag Dispenser & Organizer

Keep your kitchen counter or coffee station organized with this modern Dual-Bay Tea Bag Dispenser ! Featuring an organic wavy exterior design, this holder turns everyday kitchen storage into an aesthetic display piece. The twin-slot…

Pobrania
2098
Polubienia
597
Ocena
5
P
PrintablesTmpx64

Wave Coffee Tamper - Gift idea

Transforms freshly ground coffee into a mini zen garden. I have made several sizes available: Ø 59, 57, 53, 51, and 49 mm. A simple and thoughtful gift for coffee lovers. If you’d like to support my work, leaving a ♡ like ♥ or even buying…

Pobrania
1890
Polubienia
395
Ocena
4,86
P
PrintablesFrank

Milwaukee Shockwave box holder

Milwaukee Shockwave box V 2 Added Chamfer to the ends V 3 Shortened the arms for a tighter fit V4 6 mm hole V5 6,1mm slotted holes for div pegboards

Pobrania
1851
Polubienia
474
Ocena
5
P
Printablesywabiko

Waveshare 7" HDMI LCD (C) Case

(Update 4/12/2019) Uploaded IGES model files for easier remix. A quick snap-on case for this HDMI LCD module with capacitive touch screen. Waveshare 7inch HDMI LCD (C) ) Mount options: My desktop mounts (45-degree / 60-degree) with Pi…

Pobrania
1725
Polubienia
88
Ocena
5

Parabolic Wave Grid Panel (#1)

The Parabolic Wave Grid Panel #1 features an intricate parabolic wave pattern, created by extruding squares at varying heights. This versatile design looks incredible in various finishes, including tricolor filament, color-shift pigments,…

Pobrania
1692
Polubienia
830
Ocena
5
P
Printablesm750

Book Stand "Wave"

A minimalistic book stand that fits into most interiors. It can of course be used as a tablet or e-reader stand. Print instructions I have included 3mf for the MK3s and also one version for the MINI that is made a bit smaller to fit the…

Pobrania
1676
Polubienia
196
Ocena
4,94
P
Printablesromek142

Minimalist "Wavy Heart" Phone Stand

About the design: This minimalist smartphone stand balances modern functional art with practicality. Its side profile forms a subtle heart shape, while the construction-resembling merged parallel tubes-gives it a unique, modern aesthetic.…

Pobrania
1663
Polubienia
262
Ocena
5
P
PrintablesDecorartor

Zen Wave Vase

The Zen Wave Vase is a seamless blend of nature’s tranquility and modern artistry. Its flowing, wave-like textures create a sense of movement and balance, evoking the gentle ripples of water or the soft curves of wind-sculpted sand dunes.…

Pobrania
1657
Polubienia
493
Ocena
4,8
P
Printablesaiber

Stacked wave spring

Solidworks model for a parametric stacked wave spring. I couldn't find a satisfactory wave spring model in Solidworks, so I made my own. It will be used in a future design. In theory it should work for extension & compression; my…

Pobrania
1651
Polubienia
109
Ocena
5
P
PrintablesAndreas Gohr

RGB Wave Lamp Yeah! Remix

This is a beautiful mood light based on a RGB LED strip and a ESP8266 as controller. https://www.youtube.com/watch?v=rVWFDmi\_Bek Lamp Shade The shade is a remix of Wave Lamp Yeah! by brico3d. It has been scaled to 140% and oriented…

Pobrania
1645
Polubienia
627
Ocena
4,94

⌇⌇⌇ Mesmerizing Vase Set - Wavy

Get the whole set! > https://www.printables.com/@TripleGWorkshop/collections/655985

Pobrania
1642
Polubienia
375
Ocena
5
P
Printablesalecs.form

Helical waves lamp shade

This geometry was designed to fit a leftover socket, which was missing a lampshade. It might fit other lamp sockets as well. If you intend to use the geometry as a vase, there is also a version with a mounting hole included. Geometry was…

Pobrania
1636
Polubienia
320
Ocena
5
P
PrintablesBingoDesign

Wavy decorate ribs shelf

The wavy decorate shelf is 71cm wide (28in) and can hold up to 5Kg securely. Installation notes: 1. All 6 pieces has their part name engraved in the back 2. Start with the ‘left bottom’ part 3. Connect ‘left middle’ and ‘left right’ parts…

Pobrania
1622
Polubienia
813
Ocena
5
P
PrintablesDJMega
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
1610
Polubienia
84
Ocena
0
P
PrintablesSergey Morozov

Waveshare ESP32-S3 7inch Capacitive Touch Display wall mount case

You shoul use a 4 M3x10 screws to secure a screen to the case.

Pobrania
1607
Polubienia
56
Ocena
5
P
PrintablesDeltaprints

Wavy design Nespresso capsule holder & organizer

This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…

Pobrania
1542
Polubienia
204
Ocena
5