Wyniki wyszukiwania: wei

ChooChoo - A Lightweight/Support Free 4 Tone Train Whistle v3.1

Four-tone train whistle here! This model is composed of two simple parts and are both support free. Included is also a stand to show off your whistle, and you guessed it, it holds both versions! **Stand Update v3.1** - Split stands into…

Portal Weighted Storage & Companion Cube

Our team of scientists have developed a new device, completely on our own mind you! specifically for weighing down those pesky buttons. The guys in the lab also whipped up a version to accompany you through your life enrichment…

Pearl Roller Xmas Tree // Perlenwalze Weihnachtsbaum

Easy to print roller for forming perfectly round pearls for making jewelry, decorations or for children. Ideally suited for use with polymer clay. But also suitable for fondant or children's modeling clay. In 100% size, the Christmas tree…

Flexi Weiner Dog

It prints good but it doesn’t stand correctly like it has a hunch back.

34 Small Christmas cookie cutters / 34 Vánoční vykrajovátka / Ausstechformen für Weihnachten

🇬🇧 – English – A collection of 34 Christmas cookie cutters. Small ones, usually between 3.5 - 5 centimeters big. Collection includes: angel bell candle candy church comet cookie cross fish glove hat heart house moon mug ornament pig…

Orang Scrw - Lightweight Camping Anchor

I recreated the design of well known [BRAND NAME] plastic anchors, making one side of the thread flat for easier printing. I used 100% infill to maximize strength, but you might achieve sufficient durability with a lower infill setting.…

Elf on the Shelf - Mini-Cookie-Cutter Set // Weihnachts-Wichtel - Mini-Keksausstecher-Set

Our elf on the shelf will be baking cookies this year, but of course the cookie cutters have to be the right size ;). To make sure that this can be printed cleanly, I didn't want to simply scale large cookie cutters, but designed…

Revopoint Dual-Axis Turntable 130mm Three Jaw Chuck mdkendall-Remix | Dreibackenfutter für Revopoint Zwei-Achsen Drehteller

This is a remix of mdkendalls successful “2,5” Three Jaw Chuck" for mounting on a Revopoint dual-axis turntable. The chuck can be mounted on the turntable with M6x8 countersunk screws or with the screws developed by Whitehawk2000 . From…

Shopping Cart Coin Key - OLV (Overengineered Lightweight Version)

With just 0.75g it is a lightweight and practical shopping cart coin key that makes every shopping trip easier! 🛒✨ It fits almost all European shopping carts . Its smart design allows you to unlock the cart and remove the key instantly…

Akku-Tragegriff für zwei Einhell-Akkus - Battery Tray to carrie two Einhell batterys

zwei Akkus von Einhell in einer Hand tragen die Akkus können auch einfacher getragen werden, wenn sie nicht im Gerät sind ideal für 36V Geräte von Einhell, bei denen zwei Akkus benötigt werden die Kontakte der Akkus bleiben geschützt -…

Fensterdurchführung Klimaanlage für Velux Dachfenster zweiter Teil variabel 713-1000mm

Adapter für eine mobiles Klimagerät zur Durchführung des Schlauchs in einem Velux Dachfenster GGL 406 3059 B 19 AG04-V. Breite ca. 860mm Diesemal ist der Adapter variabel. Die Breite kann eingestellt werden zwischen 713-1000mm. Der…

CarboPod - a lightweight and adjustable picatinny bipod made with CF tubes

I couldn't find any printable bipod that was both strong and didn't require excessive hardware, so I designed my own. The goal was to minimize the amount of fasteners used, print all required springs as compliant mechanisms, and make it…

Deep Diving Crankbait: Customizable, Weighted, and Easy Assembly

This versatile fishing lure is designed for customization, featuring internal cavities for adding weights (up to 11 mm in diameter, 2x), as well as a dedicated cavity for steel wires to secure your fishing line and treble hooks. For ease…

Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”) with your own name

Lid for wheat beer glasses (German: "Weizenbier", in Bavaria also “Weißbier”). These lids fit glasses that have a thick glass rim with a diameter of 80 mm, and taper towards the opening (as on the cover picture). The hinge height can be…

Yet another filament spool clip with filament type identifyer sign - Ein weiterer Filamentclip mit Filamenttyp - Easy to print

It would be nice if you post your make. Thank you

Customizable Wall Mount for Mobile Hotspot / Wifi Access Point / Router (screws or glue pads, TP-Link, Huawei, Alcatel..)

This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…

Frohe Weihnachten Schild

Ein schönes Weihnachten Deko Schild, mit der Beschriftung "frohe WEIHNACHTEN".

Weihnachtsbaum mit Stern

Dieser dekorative Spiral-Weihnachtsbaum wird im Vasenmodus gedruckt und erhält dadurch eine elegante, gleichmäßige Struktur. Das Modell ist in drei verschiedenen Größen (100 mm, 150 mm und 200 mm). Die Spitze des Baums besitzt ein…

Skull Snake Frog Netsuke : Kimono Sash Counterweight.

Skull Snake Frog Netsuke. Kimono Sash Counterweight. 1800's - Japan.

Partial Voronoi easter egg cut at an angle | Schräg geschnittenes teilweises Voronoi-Osterei

english You can scale the model as you wish, depending on what your printer can handle. I have packed 3 sizes (40, 50 and 60 mm high) into the slicer file. I printed it in PLA with a layer height of 0.2 mm. The egg with a height of 40 mm…

Schmuck für Weihnachtsbaum

sehr schnell druckbarer Weihnachtsbaumschmuck Very fast printable Christmas tree ornaments

Schmuck für Weihnachtsbaum

sehr schnell druckbarer Weihnachtsbaumschmuck Very fast printable Christmas tree ornaments

Glücksbringer LineArt Schwein / Talisman / lucky charms pig

sehr schnell druckbarer Glücksbringer für Silvester / Very fast printable talisman / lucky charms for New Year's Eve

Brändi Dog Erweiterung 3 Spieler

Brändi Dog Erweiterung für 3 Spieler - das Brettspiel wird eigentlich immer zu viert gespielt. Mit dieser Erweiterung kannst du das Spielbrett auf 3 Personen anpassen und zu dritt - alle gegen alle spielen. Print Settings Printer Brand:…

Filament Clip - super lightweight prusament

Hi after purchasing an orange bobiba for prusament, I was struck by the beautiful honeycomb pattern perforated on the sides. As I could not find a solution to comfortably store the filament with the third-party clips protruding from the…

Hook for small, lightweigth picture frames

Tiny hook (2cm square) for small, lightweigth picture frames, use double sided tape to stick it on the wall.

Spanbaum / Weihnachtsbaum 13cm / Christmas tree 13cm

Ich habe den Baum mit PLA in mattem Hellbraun gedruckt, wodurch er aussieht, als wäre er aus Holz gearbeitet. Der Baum ist 13 cm hoch und besteht aus 6 Teilen und einem Fuß. Nach dem Druck müssen die Teile noch zusammengeklebt werden. In…

Technical Lightweight Hook for Clothes or Bags

This is my design of an intentional technical-looking hook to hang clothes or bags to a clothes rail. I designed it for a minimal material use and with a good compromise of stability. Update 2022-09-27: Added D18 for Ikea furniture. Added…

Weighted Chess Set

This is my little chess set. Highlights: Weighted pieces for nice feel and stability. Compact but still comfortable to play, 25 x 25 cm. Recess help pieces be neat and centered in the squares. Labels along all edges, 1..8, A..H. Easy…

89 mm Lysel slatted curtain/vertical blinds weight

A plate for weighing down Lysel slatted curtains. Measurements: 89mm x 50mm

Lightweight stand for Smartphone, easy and quick to print

Ein einfacher, schnell zu druckender Ständer für Smartphones. Passt in jede Jacken- oder Hosentasche, ist immer dabei und schnell einsatzbereit. Stabil genug, um ein großes Smartphone oder Tablet aufrecht zu halten. Am besten auf der…

Chip für Einkaufswagen Schweiz

Chip in der grösse einer CHF 2 .- Münze

Smartwatch Stand/Holder - HUAWEI GT3 42/46 mm

This is a stylish Smartwatch Holder for the GT3 42/46mm Version. Easy to print without any supports. For the assembly you can stick both parts together. Recommended to assemble is to glue both parts with Loctite 416 or an other glue for…

Weihnachtsbaum Schüssel / Christmas tree bowl

Eine kleine Schüssel im Baumdesing. Einfach mit Süßigkeiten befüllen oder weihnachtlich dekorieren. Gedruckt habe ich im Vasenmodus mit einer Schichtstärke von 0.3mm. A small bowl in tree design. Simply fill with sweets or decorate for…

Huawei 3 pro watch charging stand

A charging stand I made for my Huawei watch 3 pro. It fits the charger perfectly, and you can run multiple cables through the side gap in the stand as a cable organizer. the stand on itself stands perfectly (without or without the watch),…

Weighted Companion Cube - Multi-Material

A 5x5x5cm weighted companion cube, designed specifically for the Prusa Multi-material printer. After receiving my Prusa Multi-material upgrade, I needed a project to get acquainted with multi material modeling and printing. This is that…

Weihnachts-Dekolok „Festtags-Express“

Die Lokomotive besteht aus mehreren einfach zu druckenden Einzelteilen und lässt sich mit handelsüblichem Kleber unkompliziert zusammensetzen. 🧩 Merkmale & Aufbau Modularer Aufbau : Lok, Waggons, Räder, Deko-Elemente (Stern, Tanne,…

Huawei H153-381 CPE 5S Wall Mount

The space at the back between the wall and the router is set to 20mm. This should be enough space for the cables. If you need more space you can adjust the distance via the variable “Mount: Distance” variable in the FreeCAD project file.…

Sewing Weights 160g

My Wife wanted to buy those Donut weights from a content Creator, but they were out of Stock, so I made her even heavier ones. Also iterated on the design. If you use one of those fancy build plates with a pattern make sure to get a good…

Weighted Cassette Tape Dispenser

This isn't a very complex remix. All thanks to the original model including the .step file. I've added screw holes for real screws and included hollow areas that can be filled with buckshot, fishing weights or sand (if using sand wad some…

Advent Tischkerzenhalter, Weihnachten / Advent table candle holder, Christmas

Eine für die Adventszeit gedachte Tischdeko, gedruckt mit 15% innfill und stützen auf dem Druckbett. Über likes makes und follower würde ich mich sehr freuen, Peace MazZe

Keks Ausstecher für Weihnachtsplätzchen, Spitzbuben, Hildabrötchen oder andere Doppelkekse mit Loch

Diesmal etwas völlig anderes: Keksausstecher für Doppelkekse oder Weihnachtsplätzchen. Er besteht aus 4+1 Teilen: A-D werden zusammengesteckt, E dient zum Auswerfen der angesammelten “MIttelteile” , also zum reinigen. Die Teile sind also…

HJC Breath Deflector / Atemabweiser V2

!!!!! NOCH IN ERPROBUNG !!!!! STILL IN TEST !!!!! DEUTSCH: Ich habe hier für Motorrad Helme der Marke HJC einen Atemabweiser konstruiert da die dinger immer verlohren gehn. Er sollte in folgende Modelle passen: IS-16, FG-15, FS-11, FS-15,…

Turntable vinyl weight Version 2 (for more weight)

Turntable vinyl weight Version 2 (for more weight). This version has now 6 (instead of 5) slots for the 2-cent coins.

Schweizer Taschenmesser

PLA Füllung 10% Schichthöhe 0,3mm Klingen ohne Stützen, ohne Rand Messer mit organischen Stützen, Schrift im PrusaSlicer weiss bemalt

Zweifarbiges LCD-Cover für MK3.5 ohne MMU/ Two-colour LCD cover for MK3.5 without MMU

For English see below. Dies ist ein LCD-Cover für den MK3.5 auf dem es auch gedruckt wurde. Es handelt sich um einen Mehrfarbendruck ohne MMU. Die notwendigen Farbwechsel werden von Hand vorgenommen, was problemlos möglich ist. Dieses…

Weihnachtsschmuck - Christmas decorations

Dieser Weihnachtsstern besteht aus 3 Teilen, welche nach dem Druck noch verklebt werden müssen. Eine schöne Weihnachtszeit und viel Spaß beim Duck, über eine Rückmeldung würde ich mich freuen.

Weihnachtsmütze für Pringles Dosen

Super schnelles Geschenk das immer passt. Wir geben noch etwas Geld zwischen Kunststoffdeckel und Folie in der Pringlesdose. Geschenk Fertig. Den unteren Bereich in Weiß habe ich mit Fuzzy Skin gedruckt, das wertet das Model nochmals auf.…

Benjamin Franklin Clock with backing plate, different bob and pennyweight

This the Benjamin Franklin Clock version that B&B TECH shared. However, I wanted a better mounting for the clock and a more appropriate pendulum bob that suited my 6mm dowel. I also had lead sinkers on hand to use as weights and therefore…

Scuba weight belt slide stopper

Thread these onto weight belt to stop the weights sliding around. Best printed with tough and flexible plastic (PETG or nylon) with high infill. Should fit onto standard 5 cm webbing/belt. There is a file for the short (normal)-sized ones…

Weihnachtsbaumkugel

Die Druckdauer beträgt ungefähr 4 Stunden mit normaler Qualität.

Weihnachtsstern V1 / Christmas star

Stern zum aufhängen an den Weihnachtsbaum oder als Dekoration. Die Seiten der Dreiecke sind 10cm lang.

Weihnachtsbaum (christmas tree)

Ein Weihnachtsbaum als Weihnachtsbaumdekoration. Zusätzlich individuell gestaltbar, in meinem Fall mit dem Schriftzug “Merry X-Mas” mithilfe eines 3D-Druck-Stiftes nachträglich ergänzt. Auch als Geschenk für Familie und Freunde geeignet.…

Huawei P20 pro Phone-Camera Mount for analog microscopes

I sometimes have to analyze small parts for my work, and due to the pandemic caused “work from home” situation, I don't have access to the digital microscope in the office. At least I have an analog microscope at home, but I was not able…

89mm Vertical Blinds Weight Socket

Using the original design (thanks to Irgendeintyp ), I turned it into a socket to repair the broken parts. In this form, the weights were reused by cutting the broken handles and trimming the edges. This saved printing time and filament…

Piggyfant - Children piggy bank // Kinder Sparschwein

The Piggyfant is a simple but exciting piggy bank for children. It has plenty of space in its belly and a very large opening for taking out the saved money. The coins only fall into the money box when the trunk is raised to form a…

Glowing Christmas Village – 3 Houses for LED Tea Lights / Leuchtende Weihnachtshäuser

🏡 English below, Deutsch weiter unten 🏡 A little village full of light Inspired by ceramic Christmas houses, I designed the big house in Blender and then two smaller ones to keep it company. The roof shingles are placed slightly crooked…

Smart car phone Holder for HUAWEI mate 20 pro with Silcon case (Single and Multicolor))

A phone holder for the Smart car specifically for the Huawei Mate 20 fitted with the official Silicone cover Print instructions Category: Automotive

Lightweight front sight for Reximex RP (MITO)

Simple, fast to print Lightweight front sight for Reximex RP (MITO). (original shroud removed to save weight). Customizable height with changeable inserts. Meant to be fastened by small headless screw M3 x 4. (probably any long enough M3…

Joystick Gamepad Retro Arcade for PC (USB-C) and C64 / C128 / Amiga Projekt Joyweiler

Hello, this is a housing for the retro joystick project by Joyweiler for variant 5 with strip grid board and display. Many thanks for sharing the joyweiler project on gitlab and for allowing us to add a link to this project:…

Halloweiner - Halloween themed dick whistle

3DSets_Beadlock ring_70g weights

So I made the beadlock rings for the 3DSets rancher wheels to prevent tires from slipping of the rim. In addition, you can add 70g weights to each of the ring to lower the center of gravity. To add the extra weight, I used these Pb…

Landscape Phone Stand for Huawei P20pro

Phone Stand for Huawei P20pro, landscape orientation, 50deg angle. Speaker is not covered, and access USB port is given. Perfect to watch Videos, YouTube, etc. while traveling. If you are looking for a portait version, check this out:…

Filament-Wandhalter für zwei offene Rollen

Wie immer viel Spaß beim Nachdrucken und denkt mir an die Bewertung oder euer Feedback - besten Dank und Gruß

Spuhlenhalter erweiterung / Double Spoolholder Ender 3v2

einfach aber nützlich , zweite spulenhalterung für Ender 3 V2 (gegenstück zum aufstecken/erweitern) des originalen Spulenhalter! --->ACHTUNG Original wird benötigt ! <----- Simple but useful, second spool holder for Ender 3 V2…

Dumbbell Weight Stand - Flat print

Made this to keep the weights off the ground on my veranda/patio. Printed these in PLA with only 2 perimeters and minimal fill and they have held up for a year or so, with some minor damage from abuse. I would recommend printing with more…

Simple lightweight Pannier bike bag mount

Added to Prusaprinters.org as a contest submission under “Wall Hooks”. While clearly a stretch to the term “Wall”, this is nonetheless a very useful hook for those with vintage or secondhand Karrimor Pannier bags with broken hooks. ⚓ More…

A scale to tune the focus on a GWEIKE MSERIES

You will need a fiber laser cutter to cut the 1mm Inox gauge, and a 3D printer to print in PETG the support, 0.4 nozzle, 4 perimeters, 0.2 layers, support on the plate only ! printing orientation: square hole entry face the plate ! the…

Light weight SKADIS Spool Holder Toploader

I remade yet another spool holder for the SKADIS organization system. Credit for the base design goes to @Nitek (https://www.printables.com/model/136877-ikea-skadis-spool-holder-optimized) I struggled with bending the side parts to insert…

RWE - Rot Weiss Essen - Magnet

A magent sized 30x30x6,89mm with the logo from a german soccer club (Rot Weiss Essen). In the BGCODE is a pause for a 15mmx2mm magnet and a colour change at the end for the logo finish. Printed on a Prusa Core One

Spool holder for Singer 324 featherweight sewing machine

I used a 6 mm metal rod I had lying around and redid the round part as well to make it fit well… editable flies included in case you need to adapt in some way…

M Series GWEIKE Laser Fiber Focus adjust tool

Plastic style: To be printed in a non-brittle, non-warping material, PETG and PLA+ are perfect. On a good 3D printer with a good precision ... A millimeter must be a millimeter ! Print your tabs, along with the nut and bolt. Don't rush;…

Weihnachtsstern (christmas star)

Ein Weihnachtsstern als Weihnachtsbaumdekoration. Zusätzlich individuell gestaltbar, in meinem Fall mit dem Schriftzug “Merry X-Mas” mithilfe eines 3D-Druck-Stiftes nachträglich ergänzt. Auch als Geschenk für Familie und Freunde geeignet.…

Weinstaender / Wine bottle holder / Wine stand

EN: Thanks to "Pechi" for his excellent design of a bottle holder. The only thing I didn't like was the stability, especially towards the sides. I have therefore added a base to improve this. DE: Dank an "Pechi" für sein exzellentes…

Jura S8 Support - Milchreinigung ErweiterungTassenplattform

Gedruckt in PLA mit MK4

Nemo - Plastic Antweight

Say hello to Nemo! Nemo is a one-pound plastic robot based on the battlebot Malice, but he's about as beginner-friendly as a spinner can get! He only requires three printed parts, and there is plenty of space inside to fit whatever…

LED Weihnachtsbaum / LED Christmas tree

Sockel für den LED Weihnachtbaum von Roboterbausatz.de https://www.roboter-bausatz.de/p/bausatz-led-weihnachtsbaum Für den Sockel werden zusätzlich noch 10 Schrauben 2,5 x 10mm benötigt. Viel Spaß beim Drucken.…

Sewing Pattern Weight

This sewing pattern weight is printed around two 5/8" flat washers, adding heft to help keep your pattern in place. The print should be paused in order to enclose the washers. Extra Materials 5/8" Flat Washers (two per pattern weight).…

simple Dumbell Weight Holder

I really liked the Crimp Strength Trainer from @mtongnz_243883, but i wanted to use the Weights ob my dumbells. So i designed it to fit 30mm Weight Plates. I did some testing with 8 Kg as in the first picture. The Handle in the picture is…

Advent wreath Christmas tree with candle holder| Adventskranz Weihnachstbaum mit Kerzenhalter

Adventskranz Weihnachstbaum mit Kerzenhalter. Das Modell besteht aus drei Teilen und kann zum Aufbau einfach zusammen gesteckt werden. Advent wreath Christmas tree with candle holder. The model consists of three parts and can be easily…

Headphone Stand with weight pockets

This is a remix of the excellent model by JYC_RS. I printed this a while ago but was never happy with the overall stability. So I added some weight pockets to the base. The new version is visually identical, while the total mass increased…

Gridfinity Gram Calibration Weight

I stumbled upon these awesome bins implemented in CQ by @jdegs . And I had just purchased (accidentally) two sets of these calibration weights for a microgram scale. And, being a devotee of Gridfinity, I had a natural need that I could…

Ultra lightweight plant pot #0017

Summary: This pot is used for the early growing stages of your garden plants. The lightweight design allows cheap and fast mass printing. Advantages: Lightweight -cheap and fast mass printing Excess water exit hole at the bottom High…

Custom Weights

These are small containers I designed to create a range of custom weights. I needed a bobbin tension of 23g and also made plus or minus 5g weights as well. I used a scale that had a resolution of 0.1g and added metal scrap punches until I…

Bissell Featherweight Nozzle Holder

I think the model name says it all just snap it on and slide the attachment in and you're done.

Phone Stand for Huawei P20pro

Phone Stand for Huawei P20pro, portrait orientation, 60deg angle. If you are looking for a landscape version, check this out: https://www.printables.com/model/175040-landscape-phone-stand-for-huawei-p20pro

Lightweight Parametric Hex Wrench

This is a parametric wrench. Download the FreeCAD file, and open the spreadsheet to edit the different dimensions, tolerances, and wrench sizes. I made a variety of different sizes in the files... If you want different dimensions but…

Astronomy : Counterweight Adapter Diameter from 31.75mm to 25 mm (1" 1/4 to 1")

This astronomical adapter allows the use of 1" 1/4 (31.75 mm) internal diameter astronomical mount counterweights on 1" (25.4 mm) diameter rods. The adapter is drilled to allow passage for the counterweight locking screw on the rod. The…

Santa Christmas Ball // Weihnachtsmann Christbaumkugel

An easy-to-print and colourful Christmas tree bauble with a minimalist stylized Santa Claus. The ball is ideal as a Santa's belly ;) All parts are printed in one color (the upper half has a color change for the hanger), then put together…

Fractional Olympic 1lb Plates (for weight training)

1lb printable plates for fractional/micro loading an Olympic (2") bar. The 3d rendering preview on printables looks odd because it's displaying negative space as positive space. Mine came out slightly light (as shown), but that's well…

Leinenabweiser Hanse 333 line deflector Sailing

Please check dimensions, might not fit for everyone. Print, test, leave a comment or suggestion and enjoy. https://buymeacoffee.com/thorben

Meerschweinchen "Hier wohnen wir" Namensplatte

Als Geburtstagsgeschenk für einen Freund gedruckt 15% Infill

Watch holder for Huawei Gt2

Watch holder for Hauwei GT. It has the holes for zip ties. At the back there is an extrusion, because i wanted to hang it on a cilindrical object. You should scale the object to 1000.

Weidemann joystick for locking system

I printed this joystick for our Weidemann Bj. 2005, because the old one was broken. Possibly print with edge/brim so that it adheres well to the print bed. It is tapered on the inside so it should sit well on the mount. I printed ours in…

Weight - reduced wall hook

I designed this weight - reduced hook to be able to hold both an object you'll normally hang (a piece of clothing / keychain) and also a cloth hanger (poke the hanger through the hook holes) To print this hook you'll need to print two…

Aeon ACZ ULTRA FT Weihrauch HW100 Butt Hook - 0.4 dimples

i didn't like the original butt pad “wings” so i adapted/designed my own.

Paperweight / Briefbeschwerer

EN: Just a paperweight... created out of leisure. It has been treated/patinated with “TIFOO” blue patina. Caution: corrosive, follow instructions for use! The size can be varied depending on the required weight and available material. The…

Guitar pick (plectrum) with a Swiss cross (Switzerland, Schweiz)

For electric or normal guitars

Specialty Knob & Boat for Ohaus Navigator Scales for "Under"weighing

Specialty Knob & Boat for Ohaus Navigator Scales for "Under"weighing For Use with Collapsible Stand: https://www.printables.com/model/1199130-collapsible-stand-for-ohaus-navigator-scales-for-u I printed knob at 100% infill and 3…

Lightweight bike acessory handlebar mount ⌀ 22 mm PETG

I bought a stylus to enter directions on my phone while biking with gloves on. This is mostly useful in the winter. I didn’t like the original double-sided tape mount, so I designed a simple 3D-printed handlebar mount instead. It snaps…