38 049 modeli
A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
Hi Everyone: I originally posted this design for a fast-printing modular drawer system on Thingiverse, but quite a few people suggested that I also post it Printables (I can see why. Printables runs so much smoother and the support is…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Another fabric coaster. This time circle shaped and inspired by sunflower seeds arrangement. It is surprisingly very flexible and addictive to play with. Just be careful not to put your thicker fingers deep in the center, it's quite…
Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Download, load and print! Every filament and printer is different. To get the best out of your printer, you need specific settings, which means a particular nozzle temperature. That is the time when Temperature Tower comes in handy. Every…
If you are stressed, this is what you need ! Well even if you're not, you need it too haha The Fidget Flower ! A really cool Fidgettoy to have in your hands And of course it prints perfectly without supports Try it! IMPORTANT : If you…
Wydruk około 4,43 €–5,41 € nettoWstępna wycena jednego wariantu
Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is also a remix of gaaZolee https://www.thingiverse.com/thing:2729076 from 190 to 225. Just removed the top two sections of the original because I don't print at such low temperatures. It's a wider range than the short smart compact…
Wydruk około 1,73 €–2,12 € nettoWstępna wycena jednego wariantu
Remodeled my original Contemporary Dice Tower/Storage from scratch to make it printable without supports and provide a fully enclosed mini storage so that it's not possible to get jammed in the outer sleeve. The mini storage compartment…
Wydruk około 10,35 €–12,65 € nettoWstępna wycena jednego wariantu
Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…
This is adapter that relocates the PSU power switch on PRUSA CORE One (and CORE One +) to more accessible location. I'm happy with how the adapter works and if you also have trouble reaching the back of the printer, I'd be happy for you…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This object can be used to calibrate linearity correction factor for extruder motor. More info in https://help.prusa3d.com/en/article/extruder-linearity-correction-calibration_2254 Print instructions Print with PLA
Wydruk około 0,74 €–0,90 € nettoWstępna wycena jednego wariantu
This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
Sturdy shower head holder, easy to print and easy to mount. There are versions for shower rails with a diameter of 18, 19, 20, 22, 25 and 28 mm, please select the appropriate 5 files. How to print: To create stable threads, I recommend…
Wydruk około 4,78 €–5,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Keep your drains clean with this simple but super-effective 3D printable drain cleaner snake! Designed with fine hooks and a slim, flexible profile, it easily slides through most drain grates to grab hair and debris — no need to remove…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Two modular storage systems combined! GEN2 Modular Storage System is a modular rail system for mounting storage units under Lack enclosures and tables. Gridfinity by Zack Fre edman is an incredibly customizable storage solution that uses…
Wydruk około 6,77 €–8,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
🇫🇷 Bienvenue à Paris! Welcome to Paris! The Eiffel Tower in Paris has become a timeless symbol of romanticism and " la vie en rose" . It is not only an icon of the city, but of all France and also our representative of Europe in the…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
This temp tower will start at 230 degrees Celsius and will end at 190 degrees. It's better to print with a higher temperature at beginning and go lower. I added a new file with temperature from 230 to 200 degrees. You can use this file to…
🌹 Rose Flower Decor – A sleek and timeless rose, perfect for romantic interiors, gifts, or seasonal setups. Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – classic & elegant ✅ Part of my ornamental flower…
Wydruk około 2,55 €–3,11 € nettoWstępna wycena jednego wariantu
Please don't forget to like the model if you find it useful. Thanks!
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
On the Original Prusa XL , adjusting the belt to the optimal tension is crucial to achieving good quality on the prints. Here is a detailed guide .
Wydruk około 2,55 €–3,12 € nettoWstępna wycena jednego wariantu
The Sunflower Windmill - Self adjusting Sunflower wind turbine Link to the Official Ball Bearing Mod Information about model maintenance: Due to the considerable administrative effort involved in managing models across different…
Sliced at .2 mm (Quality) profile. temp change will happen, you dont have to do anything.
Wydruk około 3,02 €–3,69 € nettoWstępna wycena jednego wariantu
Please take a moment to like this project and download it from Printables - it really helps me out! Thank you Today we’re making some of these awesome customisable desktop neon signs. These ones can be powered by either a USB cable or 4 x…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Info I designed this drawer so that it perfectly fits on my Prusa MK3S+. If it doesn't fit on your printer you can just scale it down (or up). It has a smooth sliding rail to give you perfect access to all your stuff currently lying…
Wydruk około 5,57 €–6,80 € nettoWstępna wycena jednego wariantu
1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Desiged this tower in freecad after the model of already existing examples
Wydruk około 1,65 €–2,02 € nettoWstępna wycena jednego wariantu
This floral lampshade is easy to print and assemble. Designed to be compatible with an IKEA Hemma socket, this lampshade makes for a striking overhead light or can be easily set up as a tabletop accent light. Every petal in the lampshade…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena jednego wariantu
Yes I know, it's tempting to use a discarded PC fan as a solder fume extractor, but it usually doesn't do the job quite well. That is why I opted for an industrial fan with impressive specs. The Noctua NF-F12 industrial PPC-3000 PWM has…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Knobs and handles for doors and drawers, The screw hole is reinforced with 3 perimeters, I recommend when softening the layers at the top and rounded parts, they look better Update!!! Added stl model files Here you will find the 2nd…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
<033125 Adds> Update "v5" for more clear honeycomb shape. WTF? Differences from the Great Original 3D Model: Added a toe hole to accommodate shoes over 20cm. Reassigned the honeycomb holes. Adjusted the stiffener pillar angle for improved…
Wydruk około 3,92 €–4,79 € nettoWstępna wycena jednego wariantu
Wicked Skull Dice Tower. (UPDATED) UPDATED FILES: 4/28/2024 5:28PM CMT. NamingConvention: skulldicetowerfin (OLD FILES REMOVED) Thanks for your Input Raptor King. This is why I adore this community. Awesome feedback. New uploads have…
Wydruk około 34,23 €–41,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bowser Spikey Shell. Updated: 1/1/2024: Also removed piggy bank version. May or may not put up a new piggy bank version.
Wydruk około 9,29 €–11,35 € nettoWstępna wycena jednego wariantu
A three piece sunflower cookie cutter. The three piece design allows you to achieve the desired impression depth in the middle part regardless of the thickness of the dough. Or you can cut out the center part completely and swap it…
A fun little flower at a cute size (under 5 cm in diameter) that can be used as a hair accessory by sliding a standard bobby pin into the provided slot. This is a quick and easy print (no supports required), and comes in at under 6 grams…
Dragon Dice Tower. New Version is Up. (11/12/2024) 2:13 PM (CMT) fixed bottom, enlarged exit door, and added dice ramp.
I have been planning to make this model for a long time, the model complements my existing sunflower fabric coaster ( https://www.printables.com/model/285153-sunflower-fabric-coaster ). The holder should hold 4 to 6 coasters. For better…
Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Features Bigger, Better & Easier to print Each part can be printed individually The long bridge can be printed using support This is an updated version of my previous Dice Tower Be advised this model may be hard to print Your printer must…
A small power button for the 2024 Mac mini M4. Just push the base gently into the fan slots. This keeps it attached without the need for tape or else. Commercial use is prohibited, this also includes the photos.
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Print with z=0.3 PLA or PETG Put in flowers, pencils, sweets or…., love. W
Wydruk około 10,88 €–13,30 € nettoWstępna wycena jednego wariantu
Greebles Part 2! Entry panels, hatches, and more! No support required The code and model files are using “Hatchbox” pla. Change if you are using something else (trying to use up what I bought a few months ago.) Use variable height to…
This is a stubby nozzle for the Milwaukee M18 FUEL Blower. This nozzle is for the NEW blower model (3017-20) that Milwaukee just released in 2024. I couldn't find one available for this model yet, so made my own. I was able to get it to…
Fallout: T51b Power Armor Helmet - Dice Tower Removed Old Files. Hole is now 26+MM wide to accommodate dice better. Also the bottom is flat and should need less support. New files called helmetnewa.*** THANKS w3dn3sd4y for the heads up.!…
Wydruk około 23,64 €–28,90 € nettoWstępna wycena jednego wariantu
I needed simple hook for towels and other shower accessories. You can change the height of glass in attached .f3d file.
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
This is a temperature and bridging test tower to use to tune in filaments Tower has 3 different with bridges between 2 towers. Each tower is separated with a narrow part to test out layer adhesion strength by trying to brake the tower at…
Wydruk około 0,72 €–0,89 € nettoWstępna wycena jednego wariantu
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
Wydruk około 3,07 €–3,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.
Wydruk około 12,78 €–15,62 € nettoWstępna wycena jednego wariantu
Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This bookmark features the leaves and flowers of the tradescantia , which is also known as the wandering jewel, inchplant, or dayflower. (I think it's probably tradescantia zebrina .) I originally designed this as a gift for my friend ,…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
A remix of the great Gridfinity Modular Drawer System by Chipp Walters that saves 37% of filament, reduces print time and is also less challenging than Hexagon pattern remix by soulbrotherb. I added small stops for the trays, so that they…
Wydruk około 12,31 €–15,05 € nettoWstępna wycena jednego wariantu
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa Core One / Core One + / Core One L. 05.06.25 : Added MMU3 profile. 28.12.25 : Added optimized…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena jednego wariantu
This rain showerhead took several versions to "develop", but now I am showering sice 8 Months with it. The droplets produced by it are very nice and “soft”. You might need some O rings to make a good seal. If the thread does not fit,…
Wydruk około 6,46 €–7,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Building on the awesome job of @Tronic with the Temp Tower, I have remixed one suitable for the Prusa XL. The supplied G-Codes are sliced using PrusaSlicer 2.6 Release Candidate 1 at 0.15 layer height using all stock Prusa Profiles for…
Wydruk około 2,53 €–3,09 € nettoWstępna wycena jednego wariantu
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . Here are stackable counters…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
EN: I wanted temp tower from lowest temperature to highest, but first temperature from 195. Didnť find, so I remixed one for myself. Use it with PLA filaments. Included Gcode file was generated for Prusa Mini in PrusaSlicer. CZ: Chtěl…
Wydruk około 2,21 €–2,71 € nettoWstępna wycena jednego wariantu
Wall art vase with flowers
Wydruk około 7,05 €–8,61 € nettoWstępna wycena jednego wariantu
Imprints clay with a beautiful abstract flower texture. There is a positive and negative version of this roller. 20cm wide. Can be scaled for a smaller version of the pattern. Best printed upright, no support needed. Printed with a 0.4mm…
Wydruk około 2,97 €–3,63 € nettoWstępna wycena jednego wariantu
Update 220811: Added solid with 1deg step on request Replace the code below to this, ( BB and CC changed to 2 and 1 and replace STL to the new one ;BEFORE_LAYER_CHANGE G92 E0.0 {if layer_z>1.2}M104 S{(temperature[0]+ 2 )-( 1…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A short flat nozzle for Makita 18V blower DUB185. I made this for drying car/motorcycle after washing, but someone may have another way of use. I made 2 versions that have different opening area (740 mm2, 538 mm2). I'm still testing which…
Details: Available for glass panes with the thickness of 6mm, 8mm, 10mm, 1/4", 3/8" and 1/2". All models available as STL and STEP file. All models have a 0.1mm extra tolerance in the thickness. Print flat for maximum strength. No…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Temperature Tower to find the correct temperature for your filament Print instruction Material: PLA Print resolution: 0,20 Bed 60°C First 10mm prints with 190°C then every 5mm the temperature increases by 5°C !warning! Watch the first few…
Wydruk około 0,98 €–1,19 € nettoWstępna wycena jednego wariantu
This is a fully parameterized mount for power strips, but it will fit any other rectangular thing you want to mount on a flat surface (like my Dell PSU). I found some designs here, but none fitted the strips I had at home. The .3mf file…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
A simple cover for multiple socket outlets with standard switches. You need 2 M3x8 screws and some double-sided tape to attach. If you like check out my other designs too! Note: Since the question came up recently, the license states that…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…
Wydruk około 9,67 €–11,81 € nettoWstępna wycena jednego wariantu
Update 2025-06-01 : Added STL files for a spool column to allow spool stacking. They're sized to allow for a wide variance in spool widths and hub diameters. I've got a bunch of filament spools sitting around, and wanted to turn them into…
See description over here: https://www.printables.com/model/39810-improved-all-in-one-temperature-and-bridging-tower This is a remix for Prusa MK4S with and without MMU3. 17th December - Add MMU3 PETG and PLA 23th November - Fix for…
Wydruk około 1,59 €–1,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These nozzles feature the usual ½ inch (ISO228) thread that fits on most shower hoses. They create a very pointed and strong water jet that lets you power-wash the outlet of your shower or bath tube. The credit for the idea to print this…
Wydruk około 0,88 €–1,07 € nettoWstępna wycena jednego wariantu
Simple 2 piece holder for hex key set, specifically made for Wera set but probably can be used with many others. This design works with 2 hooks, which is easy to install and remove, but holds very well thanks to the small bumps on the…
Wydruk około 0,54 €–0,66 € nettoWstępna wycena jednego wariantu
Original model was designed by chendragon2099. Body is prepared for MMU2S. Filament 1: Body; Prusament PLA Galaxy Black Filament 2: Face + Tail + Belly; Prusament PLA Vanilla White Filament 3: Beak ; Prusament PLA Lipstick Red The drawer…
3D MODEL DESCRIPTION My father needed a blade balancer for his lawnmower blade this summer, so I designed him one. How it works: If the blade is unbalanced, one of the edges will weigh further down than the other. Then you have to remove…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
Wydruk około 9,83 €–12,01 € nettoWstępna wycena jednego wariantu
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
The Ultimate Carcassonne Tile Tower! There is room for 80+ tiles in each tower. There is a gauge to show how many tiles remain. There is a simple lid to keep the tiles in place when in storage. Other Versions There is also a version with…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Test your filaments to find the best printing temperature. 3mf files for any other printer, just import as project, slice and you should be ready to go!!^^ Ready-to-print G-CODE for Creality CR-10 Smart Pro printers included. Remixed from…
Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu
This card tower is designed to hold both the Karak and Karak Regent expansion cards. For Carcassonne, it has been tested with the Basic game and the Inns and Cathedrals expansion. For optimal use with Karak, I recommend pairing it with…
Wydruk około 1,41 €–1,72 € nettoWstępna wycena jednego wariantu
Electrical Grid Series - Power Station Power is no small commodity in the war for freedom across the bloody wastelands of the home worlds. This is the Electrical Power Station. Guaranteed to generate all of the electrical power your…
Wydruk około 17,55 €–21,45 € nettoWstępna wycena jednego wariantu
Here it finally is, the third version of the PRUSAMENT sorting tower. And this time it requires even less filament and have more features! Printing If you just wan to get started printing, just take the G-Codes or the .3mf slicer files…
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These models were created using Fusion 360. These models Allow you to add extra tobacco and tubes with the Powermatic 5+ Powermatic machine will need to be opened up and modified so you can keep tobacco door open while using the machine.…
Wydruk około 15,42 €–18,85 € nettoWstępna wycena jednego wariantu
🌷 Tulip Decor – A sleek and elegant 3D printed tulip sculpture, perfect for stylish interiors or seasonal decorations! Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – slim & graceful silhouette ✅ Designed…
Wydruk około 2,88 €–3,52 € nettoWstępna wycena jednego wariantu
Gary Wilson Jr. (named by GF) designed for Project “Cocktail mixer”: intended for 6 mm PTFE-Tube (might also work for smaller an up to 7-8 mm) -controlled by Micro Server 9g (SG90) printed in regular PLA Since I´m still working on a…
This is a remix of my Anker charging pad dock. https://www.printables.com/de/model/134220 This adjustable Qi charging station can be adjusted to any phone size. In addition, it is possible to charge the phone vertically or horizontally.…
Wydruk około 4,00 €–4,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Un nuevo diseño inspirado en: https://www.printables.com/es/model/678105-pistachiopeanut-bowl El diámetro es de 160mm , suficiente si los imprimes al 80%, en las fotos aparecen impresos al 100% y al 80%. Los archivos gcode tienen letras…
Wydruk około 2,29 €–2,79 € nettoWstępna wycena jednego wariantu
Stargate Dice Tower! Please leave comments and any recommendations. The base pieces and stargate pieces will need to be glued together. The Stargate should rest on top of the base, and it will sort of lock in place. The Stargate and Base…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
A simple but modern light diffuser. Looks best with colorful lights in it and works pretty great as a christmas lantern. Main tower - best to use vase mode and some clear filament Base - to be printed in full filament (Needs some glue to…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena jednego wariantu
Why I remixed it I remixed this one because of a comment I read from DERacing: "I get around the 220 mark and the part snaps away from the glass bed." and exactly the same happend to me and as I couldn't find any premade Temperature Tower…
I remixed the power outlet dust cover by grumbel , because I want to swap it more often in and out. I use it in the kitchen near the hot plate, where tomato sauce may be splashed or likewise. :) Therefore the cover is a little bit thicker…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena jednego wariantu
update: This model has updated to v2 having now stress relief for power and ethernet cable. --- Stress relief for Prusa Mini power and ethernet cable. I felt like the power plug moved too much and possibly caused stress for the power…
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Modified commercial child lock. With sophisticated locking system, which is harder to open for children. There are 2 versions of lock: Print only with mounting with glue or double tape (weaker one) Stronger version with need of M3 screws.…
Wydruk około 0,54 €–0,67 € nettoWstępna wycena jednego wariantu
What is it? Printed part to connect the particleboard floor of a drawer to its chipboard backpanel. Tested with a repair and enhancement on my 2012 IKEA MALM chest's drawers. Might work for others with the same design too. Why use it?…
NEW MODEL 03/25 with POWER BUTTON on the front ! Improved model with mechanical POWER BUTTON extension on the front. An again improved and redesigned body for better print quality. Fits on building plates of all PRUSA Mk3,MK4, CoreOne or…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
While thinking of new ideas we realized that we never made a Flower flowerpot! So... We made one! We hope you like it! Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send…
Wydruk około 2,78 €–3,39 € nettoWstępna wycena jednego wariantu
Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Simple yet effective show drain cover to catch hairs from getting stuck down the drain. You can easily clean it after showering preventing nasty unclogging rituals. Based on previous experience it will hold up for over 5 years even when…
The GCODE file contains a model in vase mode with dimensions X 100mm, Y 100mm, Z 60mm. Thickness and flow of the outer wall 0.65mm 150%, bottom of the pot 1.08mm, initial layer 0.28mm.
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
Now supports Mosaic Canvas!!! During MultiColor 3D printing the default way of purging the old color during transition between colors is to use a purge block or wipe tower. The main problems with purge blocks are that they must be printed…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
