Wyniki wyszukiwania: witt

Sortowanie

129 modeli

P
PrintablesSchnitzelEater

Ecowitt WH43 wall mount

A wall mount for my Ecowitt WH43 which should be used indoor only. I decided to ignore it by creating a wall mount for this. The mount has holes for zip ties as well. Should be printed with a material which doesn't care about weather…

Pobrania
18
Polubienia
0
Ocena
0
P
PrintablesElan

Wittle Wadder (Widdle Wadder, Little Ladder)

Saw this silly thing on IG (https://www.instagram.com/reel/C2FxIc6pKIZ/) and decided to make one of my own just for the fun of it :) Prints with no support and uses 6mm magnets.

Pobrania
2210
Polubienia
123
Ocena
5
P
Printablesdarryl12123

Ecowitt WS90 Wall Mount

Wall mount for a Ecowitt WS90 weatherstation. To mount outside: Print in PETG Screws 4x40mm stainless steel

Pobrania
386
Polubienia
19
Ocena
5
P
PrintablesFlippyTK

BMW E46 convertible/coupe: Speaker mount (165 mm Medium speaker + 44 mm Twitter)

These speaker adapters were designed during my E46 convertible sound upgrade. My E46 is a Euro spec convertible without Hi-Fi nor HK options. This means: Sound amplification is done directly by the build-in radio (CD53 manufactured by…

Pobrania
362
Polubienia
42
Ocena
5
P
PrintablesBarry

Case for the jhewitt ESP32-based wardriver board.

Bottom is made for 3mm heatset inserts. I used four stick on rubber feet to stabilize the board since the gps module lives under there. A few dabs of hot glue will keep it in place. The holes for the screws on the antenna ring and the lid…

Pobrania
311
Polubienia
25
Ocena
5

Twitter X Multi Angle Statue

Print options Print with supports.

Pobrania
232
Polubienia
8
Ocena
0
P
PrintablesDough29

Ecowitt WS90 Wall Mount with cable hole

Made this remix so we can mount the WS90 by routing the cable through the mount.

Pobrania
200
Polubienia
11
Ocena
5
P
PrintablesBenny

Ecowitt WH57, WH32 holder - radiation shield

Holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports adhesive for bonding plastic, I used Loctite 406 screew 4x M3x10 innox 2x UV stable binding strip 280x4,5 mm print 1x part A, 7x part B(B+), 1x part…

Pobrania
200
Polubienia
24
Ocena
5
P
PrintablesWakahiru_me

Twitter cookie cutter

Nozzle: 0,4 Supports: NO PLA, PETG

Pobrania
149
Polubienia
39
Ocena
5
P
PrintablesJethro

Ecowitt WittBoy GW2001 Pole Adapter

Adapter to mount the GW2001 to a 1.5in pole. Allows the heater cable to be passed though. I've printed in white PLA with a spray UV coating.

Pobrania
118
Polubienia
7
Ocena
0
P
Printablesfigterk

Twitter Blue Verification Checkmark

Now you can have your own Twitter Blue verification checkmark without paying $8/month. Put it on your home office door, that way whenever you walk in, you will know you are verified.

Pobrania
114
Polubienia
17
Ocena
4,67
P
PrintablesOndřej Hladík

Ecowitt GW1100 case/mount

Case with holder for Ecowitt GW1100 Wi-Fi gateway. The holder allows you to place the gate anywhere you want. Printing without supports, Infill: 15%. Share your printed model.

Pobrania
106
Polubienia
11
Ocena
5
P
PrintablesBenny

Ecowitt WH31 stand

Ecowitt WH31 stand Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: unknown PLA Category: Household

Pobrania
101
Polubienia
5
Ocena
5
P
PrintablesNineBreaker

Florks (From @florkofcows on Twitter/X)

I really enjoy content using florks (especially on r/noncredibledefence) and always found them cute and funny at the same time. I had an idea to give some of these out where people can decorate them on their desks or shelves. I did not…

Pobrania
100
Polubienia
14
Ocena
0

Sol Lewitt "Complex form with black and white bands" 2 Color

A piece by Sol Lewitt that often appears in the background of CNN interviews where they use this guy. I guess he bought it. Found via reverse image search, gottta love the internet. For this look start with White then switch to BLACK.…

Pobrania
89
Polubienia
45
Ocena
5
P
Printables3DLada

Twitter X Keycap

Twitter X Keycap printed with White and Black

Pobrania
80
Polubienia
13
Ocena
0
P
PrintablesTeodor Hristov

Ecowitt WS90 - 7-in-1 weather station stand

Powered by Shelly Ecowitt WS90 - 7-in-1 weather station stand for flat surfaces

Pobrania
79
Polubienia
5
Ocena
0

twitter 3d bird

twitter bird

Pobrania
78
Polubienia
1
Ocena
0
P
Printableshotpretzel

Twitter Troll

Just add hair!

Pobrania
76
Polubienia
2
Ocena
0
P
PrintablesDusanJ

Witter towbar weather plug

Print on side with supports (see attached project file for recommended print settings).

Pobrania
73
Polubienia
3
Ocena
5
P
Printables3DB

Twitter Logo

Twitter Logo

Pobrania
72
Polubienia
2
Ocena
0
P
PrintablesSammy Parsons
Pobrania
68
Polubienia
3
Ocena
0
P
Printablesdairiki

Ambient Weather (Ecowitt) WH31 stand

A stylish stand for an Ambient Weather WH31 temperature/humidity sensor. I think the thermometer is the same as the Ecowitt WH31. (I believe Ecowitt makes the Ambient Weather product.) Printed on a Prusa Mini+, 0.2mm layer height, 2…

Pobrania
65
Polubienia
4
Ocena
5
P
Printablescyberreefguru

Witty Enclosure

An enclosure for a Witty ESP8266-based microcontroller. Hole for USB to power device, and hole for wires to exit on the opposite side. https://www.tindie.com/products/ICStation/esp8266-wifi-witty-cloud-development-board8154/…

Pobrania
65
Polubienia
4
Ocena
3
P
Printableshayashi

The Twitter logo changed from a blue bird to an "X."

「X」を回転させると、実は青い鳥が隠れています。@90度回転させると青い鳥と「X」が現れるモデルです。

Pobrania
65
Polubienia
2
Ocena
0
P
PrintablesAlvomane

Ecowitt WS90 25mm railing mount for 42-45mm M8 pipe clamp | Ecowitt WS90 25mm Geländerhalter für 42-45mm M8 Rohrschellen

EN: With this adapter, an Ecowitt WS90 weather station can be mounted on pipes or railings up to 45mm in diameter using a standard M8 pipe clamp. The adapter has a diameter of 25mm and a recess especially for the WS90 power connection…

Pobrania
63
Polubienia
8
Ocena
0

DIY "twitterbox" (box plays sound when person present)

This 3D model serves as a housing for a device that plays sounds when a person is present in room - see the following YouTube video for details:

Pobrania
62
Polubienia
2
Ocena
5
P
PrintablesJD Rincs

New Twitter logo X

This is the new Twitter logo after the name change to X 8g - 2.66m

Pobrania
62
Polubienia
2
Ocena
0
P
Printablesryrodriguez

Baseball Jersey (Bobby Witt Jr)

Made from Tinkercad, Bobby Witt Jr is my favorite player

Pobrania
57
Polubienia
5
Ocena
0
P
PrintablesToxicMaxi

Twitter Logo

Twitter logo in 3D. 5mm high.

Pobrania
57
Polubienia
5
Ocena
0
P
Printableskamicane

Twitter verified keychain

Tired of being a nobody? For just $8 (or a couple of grams of filament) you too can be important!

Pobrania
56
Polubienia
10
Ocena
5
P
PrintablesGZT project

Lewitt LCT 240 microphone holder replacement

Just a simple TPU printed part to replace the broken original rubbery holder. Uses original hardware and stand mount.

Pobrania
55
Polubienia
3
Ocena
0
P
Printables3DLada

Twitter Keycap

Twitter Keycap printed with White and Blue

Pobrania
52
Polubienia
12
Ocena
0
P
PrintablesKN16

Lucky Cat Cookie Cutter (Twitter Version)

The Twitter version of my Lucky Cat Cookie Cutter. (Farting sound not included) (If you know, you know) The original version can be found Here. Print from any food-safe material at 100%. Enjoy! You can find all of my unique cookie cutters…

Pobrania
51
Polubienia
10
Ocena
0
P
PrintablesCyfron

Wittchen suitcase handle repair kit

Wittchen suitcase handle repair kit. You need extra: M3x25 screw - 2pcs M3 screw washer - 2pcs M3 nut - 2pcs

Pobrania
49
Polubienia
3
Ocena
0
P
PrintablesBridget

Twitter tombstone

I made two versions, both can utilise colour changes at layers in order to have a tombstone colour, a lettering colour and a bird logo colour. I started printing mine before I finished the design because I was impatient. I'd suggest…

Pobrania
48
Polubienia
15
Ocena
5
P
PrintablesLyricon

Adjustable stand and wall mount for weather station rain gauge (Ecowitt, Froggit, Fine Offset, Ambient Weather)

My Froggit weather station includes the Froggit DP80 rain gauge. It came with a 32mm, 200mm long, mounting pole and brackets to screw to the rain gauge. This design has a ball that fits around the pole and a joint type stand to screw to a…

Pobrania
47
Polubienia
8
Ocena
0

Twitter Verified Bobbleheads ✓

Save the 8 bucks and print yours today! Sorry Elon!! - Double spring and extra wide bases included.

Pobrania
43
Polubienia
33
Ocena
0
P
Printablesjacekpom

Handle for suitcase wittchen GROOVE Line 96L

Handle fits with original m4 screws

Pobrania
41
Polubienia
4
Ocena
0
P
PrintablesEHI

Twitter Verified

For all the people that have enough money for a 3D printer but agree that 8$ is too much.

Pobrania
41
Polubienia
7
Ocena
0
P
PrintablesP-196

Twitter Vogel Keksausstecher

The Twitter Logo as Cookiecutter I made this Model with https://app.cookiecad.com/

Pobrania
38
Polubienia
2
Ocena
0
P
PrintablesChoumarin

Bird spikes for Ecowitt WH40 rain collector

Bird spikes for the Ecowitt WH40 rain collector, which has a 182mm diameter. I didn't have metal wire at hand, so I used PETG and printed some spikes using the “cylinder primitive” in Orca / Prusa slicer. Onshape link

Pobrania
38
Polubienia
2
Ocena
0
P
Printablesidcrook

Ecowitt WittBoy WS90 Weather Station Sensor Array Birdhouse Pole Stand Adapter

Adapted a birdhouse segmented pole (from a birdhouse mount kit) to use as stand for Ecowitt WS90 weather station sensor array. The adapter fits on end of one segment of the pole. The other end of the adapter is for the 1-inch pole mount…

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesJan Stanka

Ecowitt sensor radiation shield

[EN]: Radiation shield with 6cm inner diameter and 12 cm outer diameter. Harware-less assembly. Print from ASA/ABS upside down, then glue bowls together. Bowls and Cap without supports. The mount with tree supports. [CZ]: Radiační štít…

Pobrania
36
Polubienia
3
Ocena
0
P
PrintablesEhisforAdam

LeWitt Birdhouse

Birdhouse based off the work of Sol LeWitt. Instructions Print it out at high density. It shouldn't need anything special. Category: Outdoor & Garden

Pobrania
35
Polubienia
6
Ocena
0
P
PrintablesToytalRecall

Twitter Verified

The only checkmark you need to make sure everyone knows you're who you say you are! • Label Pin: https://www.amazon.com/dp/B07X9YFVVB • Keychain: https://www.amazon.com/gp/product/B07DC9YZXV • Magnet:…

Pobrania
34
Polubienia
7
Ocena
0
P
PrintablesWade Edwards

Fence Bracket for ecowitt WH57/WH32 Solar Shield

The bottom and fence bracket are connected with a dovetail and use a single M4x20 countersink screw to secure the bottom to the bracket. No nut is needed since it will make its own threads. This will make a solid connection. Print the…

Pobrania
34
Polubienia
5
Ocena
0
P
PrintablesTrey Chaffin

Ecowitt WS90 Wall Mount with cable hole (remix^2)

Extended tube version of the WS90 wall mount. Didn't end up going with this design for my application, but I'd figure I'd upload it here anyways.

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesVincent Cordier

plate for ecowitt Weather station

I made that plate to mount my Ecowitt WS2910 on top of a wooden structure. I printed it in PETG but ASA would maybe be even better. I used Spax 3.5 woodscreew to mount it.

Pobrania
30
Polubienia
2
Ocena
0
P
Printablespapinist

Bird defense\Spike ring for Ecowitt weater station rain gauge

Spike ring to avoid birds pooping in my rain gauge. This fits ecowitt's weather stations\rain gauge (about 11 cm dia.) I got the idea from @halfdink's thing, but designed it completely from scratch. Support me! If you want, you can…

Pobrania
29
Polubienia
3
Ocena
0
P
PrintablesCollisto

Musk Twitter Sign

Great little Musk/Twitter Sign just for giggles. Annoy the left, side with freedom with this Twitter sign. Print in Blue and White, stopping half way for a filament change. You may have to scale to fit your machine.

Pobrania
29
Polubienia
19
Ocena
5
P
PrintablesBenny

Ecowitt WH57, WH32 holder

Simple holder WH57, WH32 for pipe diameter 60mm printed from ASA275 layer 0.2 without supports 2x UV stable binding strip 280x4,5 mm

Pobrania
29
Polubienia
3
Ocena
5

Twitter Jail Bird

desk or shelf art for your attorney friends or Twitter jail friends. Recommend .12 layer height on an Ender or .15 on a Prusa. I followed the originals recommendations.

Pobrania
27
Polubienia
8
Ocena
0
P
PrintablesPsych0h3ad

𝕏 Bird (X x Twitter)

Waiting your remix!!

Pobrania
27
Polubienia
3
Ocena
0
P
PrintablesBioBene42

SG Flensburg-Handewitt Keychain

1st Layer: 0,15 other Layers: 0,16 Perimeters: 2 Infill: 25% Grid Scaled down to 80% (in pictures) printing speed slowed down about 30%

Pobrania
26
Polubienia
0
Ocena
0
P
PrintablesBoXJakub

Ecowitt WH32

Sensor stand - wh32 Ecowitt Bardzo Fajny stojak do czujnika pokojowego. A very nice stand for the sensor!

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesPeter

Twitter Blue Verified Checkmark Keychain

Get your own Twitter Blue checkmark at no cost! Twitter Blue Verified Checkmark Keychain. I included a 3mf that has a manual color chain exported from prusa slicer, use your favorite white pla filament and then switch to a blue one. If…

Pobrania
26
Polubienia
1
Ocena
0
Pobrania
25
Polubienia
2
Ocena
5
P
Printablesar3Dprints

Twitter New Logo "X"

Here is the all new X logo

Pobrania
25
Polubienia
1
Ocena
0
P
PrintablesMichael Whitley

Ecowitt GW3000 Cover

This is a cover for the Ecowitt GW3000 Gateway. The cover is designed to give the gateway a refined look when mounted to the wall or sitting on a flat surface. It does not interfere with the operation, ports, or airflow. It also contains…

Pobrania
23
Polubienia
6
Ocena
0
P
Printablesarturo182

Twitter Blue Checkmark Keychain

Change color mid-print to get the dual colors.

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesThorb
Pobrania
23
Polubienia
2
Ocena
0
P
PrintablesAntonio Conesa

New Twitter X Logo (scalable)

A simple New Twitter X logo scalable (size and thickness) for any use

Pobrania
23
Polubienia
2
Ocena
0

Twitter Dead to ME

Go Elon Musk! But Twitter is dead to me….

Pobrania
22
Polubienia
8
Ocena
0
P
Printablesyahbluez

Twitter Coin

TL;DR The Mysterie Twitter Coin Twitter Today i read a story on twitter, about a guy who claimed to have “stolen” the logo(?) of “twitter coin” from an internal twitter developer database and watermarked it to protect “his” intellectual…

Pobrania
22
Polubienia
1
Ocena
0
P
PrintablesWorldspawn00

Ecowitt Thermometer Holder for P1P ARC Enclosure

Designed for the W31, but other similar Ecowitt models should also fit. Made to attach behind the door handle in the Bambu P1P ARC enclosure, to position the sensor at the top of the chamber to monitor the active print area temperature.…

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesDragonClips©

Ecowitt sensor & thermal shield support

for Ecowitt WN32, TN31, WH57, WH32 sensors Pole diameter 34 mm (or wall mount) Printed from PETG layer 0.25 no supports Thermal shield used: https://s.click.aliexpress.com/e/_oCWC4dv (no affiliate links)

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesManelTo

UUGEAR Witty PI3 (step format)

A Witty Pi3 version 1 component from UUGEAR for the Raspberry Pi in step format for use in your own designs.

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesMartin_au

Easy view stand for Ecowitt WS2910

A simple print for the Ecowitt 2910 console. This stand lifts the console up and positions the screen at 10º tilt, so it's viewable from more locations. The original stand tilts the console back too far. Print on its back. No supports…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesCollisto

Musk/Twitter Magnet

This is a remix of my own sign posted weeks ago. I have scaled this to be more appropriate as a fridge magnet. I have also thickened the design and hollowed locations to insert up to (4)-2mm x 8mm magnets. You could also print without…

Pobrania
20
Polubienia
9
Ocena
5
P
PrintablesHatsuseno Rin

Twitter Verified Ornament

A small ornament for Christmas trees. Non Commercial , absolutely not for $8.

Pobrania
20
Polubienia
5
Ocena
0
P
Printablesjfffrm

litter kwitter green mod

My cat is semi toilet trained he pees on the toilet without issue but refuse to poop when toilet doesn't have any litter at all. This model attaches to the green piece of Litter Kwitter as shown in the picture

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesDipak Chaudhary

twitter keychain

twitter keychain

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesM.Z

EcoWitt WS 90 Halter

Wandhalterung für den Ecowitt WS 90

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesMikoa

Adapter / Halterung Ecowitt WS90 Wetterstation auf ~ 50 mm SAT-Halterungsstange

Ein Adapter / eine Halterung, um eine Ecowitt Wittboy WS90 Wetterstation auf eine vorhandene SAT-Halterungsstange draufzusetzen. SAT-Stange hat einen Innendurchmesser von 49,8 mm (ohne Schutzkappe auf der Stange) auf Ecowitt 27 mm…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesAmieDD

Onion Twitter Badge

Wearable Twitter feed badge. My Code is on github. https://github.com/AmieDD/oled-twitter-display Using the Onion Omega2+ . Twitter IoT Name badge Hardware Ingredients Onion Omega2+ Onion OLED display Onion OLED expansion dock ###…

Pobrania
19
Polubienia
0
Ocena
0
P
Printableschal

Magnetplate for Ecowitt GW1100 case/mount

This is a magnetplate to screw on the mount. You need 4xM4 ~10mm Screws and 8x6x3 Magnets.

Pobrania
19
Polubienia
1
Ocena
0
P
Printablescopycat

Witt Sensoric back panel replacement

The original back panel of the sensor keeps breaking in the corner mounting points. And if it breaks, the sensor is no longer aligned with the reflector and the gate won't close. A “wide holes” (5mm) variant is included if whoever…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesNoim

Twitter Gravel V3 – 30 mm Headset / Stem Spacer

Description Custom 30 mm headset / stem spacer designed for the Twitter Gravel V3 gravel bike . This spacer follows the shape of the original headset area and is intended to provide a cleaner, more integrated appearance than using a stack…

Pobrania
18
Polubienia
3
Ocena
0
P
PrintablesBeloc

Twitter Verified Icon

With the Twitter verification fiasco I decided to make these. I incorporated magnets in mine to verify my refrigerator! I've added 2 .STL and both of the .F3D files so you can do what you want with them. One has the checkmark completely…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesCPS_Systems

Ecowitt Gateway Stand Desk Shelf GW1200 GW1000

Ecowitt Gw1000, GW1100, GW1200 IOT Wi-Fi Gateway with Built-in Temperature/Humidity desk stand holder. USB cable end size: 18mm wide x 10mm high x 26mm long Several temporary supports in the cable opening that can be easily removed with a…

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesAntonio Conesa

Twitter Logo (scalable)

A simple twitter logo scalable (size and thickness) for any use

Pobrania
17
Polubienia
2
Ocena
0
P
Printablestubi

Twitter Verified Badge logo

The Twitter Verified Badge logo

Pobrania
17
Polubienia
2
Ocena
0
P
Printablesvishsant

Revive the Iconic Blue Bird: Craft Your Own Twitter Memories in Sand

In the depths of my heart, I hold a cherished memory that intertwines with the essence of Twitter's iconic blue bird logo. It was a symbol of connection, of sharing joy and sorrow, and a reminder that in this vast digital world, we are…

Pobrania
16
Polubienia
8
Ocena
5
P
PrintablesRyxxi_makes

Twitter Logo CherryMX keycap

Twitter Logo CherryMX keycap Category: Signs & Logos

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesRepa

Witty Cloud module enclosure box

Enclosure for the ESP8266-based Witty Cloud module. Hole for USB to power device, a hole on tha back to hang the box on a screw and holes for the light sensor and RGB LED. You might want to add the plastic opal lenses to make it neat.…

Pobrania
15
Polubienia
2
Ocena
0
P
Printablesmmmmmgood

Ecowitt LDS-01 Rain Barrel Mount

This print holds an Ecowitt LDS-01 on top of a rain barrel. I purchased rain barrels through rainbarrel.ca and wanted to mount my new Ecowitt LDS-01 laser distance sensor to be able to determine the amount of water in the barrel. These…

Pobrania
15
Polubienia
0
Ocena
0
P
PrintablesMartin_au

Ecowitt WS69 Detachable Mount and Bracket

I use this to bring our weather station sensor down for cleaning as it is mounted 4m above the ground. Current design uses a survey level pole for the cradle, but it should be easily adaptable to other poles. Consists of: A mount to fit…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesdickenhobelix

Wittmayer Hapsichord Jack with Tongue

Version 1.0 of a Hapsichord jack and tongue for delrin quil replacement on my Wittmayer Hapsichord DBP 9219008. This project aims to offer a simple replacement by using delrin quills. Instead of stuffing the delrin ones into the old…

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesStarForge

28mm DND Elusive Quick-Witted Swift Dragon Fantasy Mini StarForge Kits 3D Print STL File

Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…

Pobrania
13
Polubienia
4
Ocena
0
P
Printablesjopi63

Wandhalterung für Ecowitt HP2560 / Froggit HP2000 Wetterstation

Diese passgenaue Wandhalterung ermöglicht es, die Konsole der Wetterstationen Ecowitt HP2560 oder Froggit HP2000 sicher und platzsparend an der Wand zu montieren. Da das Originalgerät primär für das Aufstellen konzipiert ist, schließt…

Pobrania
13
Polubienia
2
Ocena
0
P
Printablesjufy111

Ecowitt temp and humidity sensor case WH31/WN31

I wanted to adapt my Ecowitt temperature and humidity sensor so that it can fit in the AMS for my BambuLab X1C. This 3 part enclosure refits the electronica for the Ecowitt WH31/WN31 Temperature and humidity sensor. Dimensions are…

Pobrania
13
Polubienia
3
Ocena
0

Twitter/Google+ Icon App

Google+ ist dead but it could live in our hearts If you like to, check out my other designs too!

Pobrania
12
Polubienia
6
Ocena
0

boucle d' oreille twitter

paires boucle d' oreille twitter

Pobrania
12
Polubienia
9
Ocena
5
P
PrintablesCheebaSweets

Ecowitt HP2551 Skadis Mount

Skadis mount for Ecowitt HP2551. Fits into the holes in the back of the device. Attached mlrkey's skadis mount (https://www.thingiverse.com/thing:5257623) Print with supports

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesMarcin K

Meteorological shelter for Ecowitt sensors

A weather shelter for Ecowitt sensors. A housing designed for mounting the Ecowitt WN31A sensor outdoors. It provides ventilation and protection against rain, and reduces heat radiation from the wall. It should be printed using white…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesNoim

Twitter Gravel V3 – Aero Seatpost Tool Box Mount

Description Custom aerodynamic tool box mount for the Twitter Gravel V3 seatpost . I designed this adapter specifically for the aerodynamic seatpost used on the Twitter Gravel V3 . The mount allows you to install the excellent “Seatpost…

Pobrania
12
Polubienia
10
Ocena
0
P
Printablessirideain

Twitter Verified Tick

Remix of the Twitter Verified Bobbleheads by Triple G Workshop, added a recessed surface of the tick to add colour in the Bambu Lab Studio, should also work with Prusa Slicer.

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesmilk drop
Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesFroeForge

Ecowitt Wittboy 29.5mm pole mount

I still had the mounting hardware for my old weather station installed. The mounting pole outer diameter of the old one is around around 29.5mm ish. The inner diameter on this remixed version of the pole adapter is around 29.6 in the…

Pobrania
11
Polubienia
1
Ocena
0