817 modeli
This is a working cannon. It has a spring to shoot cannon balls. Use the hinge to aim precisely. Print as many cannon balls (included) as you need or shoot paper balls, peas, etc. Print it as a toy for your kids, grandkids, or present it…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
This is a marking-gauge for woodworking purposes to mark the same measurements against different edges. I found some existing marking-gauges around but wasn't able to adapt them to my ruler measurements. So I decided to make my own in…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates and more detailed instructions. Go to my site for an overview of my other models . Only a few of them are published on…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Update: Added bolt-joined 7 inch shell with 3 different drumheads. For this variant you will need additional parts: 3x M3x10 bolts, 3x M3 nuts. I'm a drummer who decided to check out if there is a possibility to print any great sounding…
Wydruk około 2,99 €–3,66 € nettoWstępna wycena jednego wariantu
This saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking and…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena jednego wariantu
Update 27-Aug-2024 I've got feedback about Clearance is too big for some printers. So I reuploaded new stl file with tighter tolerance. I also upload Original Fusion 360 File for customization and tolerance adjust. Just need to modify…
Wydruk około 1,10 €–1,35 € nettoWstępna wycena jednego wariantu
**************** If you download 💾 or collect 🗄 please hit the LIKE 👍 button. 😀 If you print 🖨 it post a picture 📷 / MAKE ! 😄 Let me know how it works for you.❔ 🙂 Don't forget you earn Prusameters🧵 when you post a MAKE ! ****************…
Wydruk około 2,08 €–2,54 € nettoWstępna wycena jednego wariantu
3D Print an entire RC model railway including a wifi controlled steam locomotive which streams a live video feed to your mobile and blows steam out its funnel! Please ‘Like’ this project, it helps me and my future projects. Thank you.…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Students will design a functional elevator model controlled by the Arduino system that will transport material (cylinder) to the given floors in the warehouse.
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Hardworking Dwarfs, gnomes for the garden. Very nice characters. It is suitable for coloring. My children absolutely love it :-). Important: If by chance the…
Wydruk około 10,73 €–13,12 € nettoWstępna wycena jednego wariantu
This is a keychain cannon, ready to defend both the office and your home. It has a spring to shoot cannon balls. Print it as a toy for your kids, grandkids, or present it to friends as a gift. New: Now 1200 first names are included as…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Printed on both my MK4 nozzle 0.4 (with latest firmware and PS software) and my MK3S+ with 0.6 nozzle. Print the Chassis first. Put supports under the ends for the wheels. The holes for the axles have been enlarged to allow for a 5 mm…
Wydruk około 9,86 €–12,05 € nettoWstępna wycena jednego wariantu
Print Tips And Advice make Shure when you are printing you have at least 0.15 mm resolution so you don't accidentally fuse the moving parts together. also if you want a functional print dont scale it up over 175% for overhang reasons.…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
For M33x3.5 sized woodturning chuck, to rest it on the wall Print instructions Printed in ABS or ASA, reinforced with a 23 mm dovel (the chuck is quite heavy) glued inside the part Slice in 0.3 mm
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
Working from home seems like a great idea when it's by choice, but during these strange times of social distancing and self-isolation it can be hard to focus and get things done with the kids screaming and running around, teenagers…
Wydruk około 3,45 €–4,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Super easy print! Just fill the print bed and go! I recommend printing with Smaller Layer Heights to keep the rigidity of PLA with 100% Infill . Please feel free to play around and let me know if you feel like any other materials work…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
By accident created a nice little crankshaft mechanism. With very little cleanup, mostly the brim, and a careful rotation of the parts, it works. It is one print, no support material or anything else.
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
I printed it in PETG with no supports (mk4s) It works well with 4x4 round LEGO bricks.
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Collaborative or individual desk for work or study spaces, such as a library, workshop or office.
Wydruk około 0,53 €–0,65 € nettoWstępna wycena jednego wariantu
I created this Clay Rulers, Blades Storage Tray as an effective and efficient way to keep my clay tools in it's “place” and not all over my desk when sculpting with clay.
Wydruk około 4,07 €–4,98 € nettoWstępna wycena jednego wariantu
Tool for working with Pylontech LV batteries (external charging and discharging - 2mm test probe diameter) and other batteries using the SurLok QLB connector…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Źródło oznaczyło ten model jako treść 18+.
The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…
Źródło oznaczyło ten model jako treść 18+.
Źródło oznaczyło ten model jako treść 18+.
The Orbit Revolver is my fully functional toy blaster designed to be satisfying to handle and as accessible as possible. It is currently my favorite printed model across all my years of 3D printing. I would recommend watching the YouTube…
Źródło oznaczyło ten model jako treść 18+.
This is a woodworking marking gauge, the only thing you will need to add is a 40mm socket head bolt and an hex nut. For the long body I suggest to use Brim to ensure the adherence to the printer bed. The tool in the image is printed with…
FULLY WORKING BUTTERFLY KNIFE
Working V6 engine , engine block from @Prusa research, pistons, crankshaft and stand made by me. I made it actually work , can work with a electric motor. or any other motor that can be attached to the crankshaft. The model can also be…
Źródło oznaczyło ten model jako treść 18+.
Hi there! Welcome to my most complex model so far! Do you hate models that are a nightmare to print? Because I do! Easily printable models is an attribute that I want my name to stand for! I designed this engine model from scratch and…
A very useful tool when treating surfaces, e.g. woodworking. With these tetrahedrons both sides of the board can be treated immediately. Only minimal traces are left at the contact points. They are about 20mm high and as it is a…
A fully 3d printed duck call. settings brim: yes supports: no material: pla for everything except the tpu part
The M4 screws (which includes a nut) were CADed with the intent of being able to use them in low-stress situations. The screws should be similar to the goBILDA M4 screws, which you can use interchangeably with these 3D-printed screws, as…
Unleash medieval mayhem on the battlefield with this 28mm trebuchet sample. Test it before you trebuchet it! This is the Free Sample version of my functional 28mm trebuchet — a simplified, working model designed to let you try before you…
This is a working slot machine. It has a spring to spin two lucky wheels. Use the feet on the back to display the slot machine on your desk, so people will pick it up and play. Or print it as a toy for your kids, grandkids, or friends.…
Disclaimer : I do not take any design credit (nor blame for the flaws) of the original model. I merely tried to repurpose and improve upon it for personal use. Optimized for Prusa Mini or similar sized bed: all the files are scaled and…
To make the ski lift you first need to print all the parts. Print 8pcs of; “wheel-connect2”, wheel-connect1, wheel-connect3 Print 16pcs of “small-wheel” You can add som grease to make the small wheels spin better. You also need to use…
YouTube video - watch it! ER-15 is a toy that mechanically is a slingshot and is NOT A FIREARM and you can use for target practice around the house ER-15 - Ekcnheb The “ER-15” was created after the success of the model "E200" to improve…
This is a fully functional bistable compliant robot gripper for your keychain. In its initial position the gripper is closed, when you push the switch in the middle upwards it snaps into its new position. This opens the gripper. The…
This is amazing model was made by rndmframes_printing and the licensing allows sharing with attribution so I wanted to make sure the prusaprinters.org visitors didn't miss out on it by re-uploading! Original link here:…
Working cuckoo call the cuckoo is a shy bird. you hear it often but you almost never see it. use this call to see them up close. Use supports like this:
This is a model of a Stargate that includes a working Iris. It comes with a pedestal based on the Tauri ramp in SGC. The Iris can be open and closed. For easy assembly, please watch the following video:
Follow us on Patreon & Instagram for the latest models. ❱ Instagram: https://www.instagram.com/sektor7_studios_3d/ ❱ Patreon: https://www.patreon.com/sektor7_studios (commercial license & more beautiful designs) BOB - THE WORKING GHOST…
The model is 54mm long, 40mm wide and 38mm tall, using 31g of filament. Feel free to scale it up, but I did not test the fittings on a bigger model, so there might be some mistakes. You have to realistically assembly the bottom end of the…
This is the working cannon , with an added autoloading mechanism. It has a spring to shoot cannon balls. Use the hinge to aim precisely. Print as many cannon balls (included) as you need. Print it as a toy for your kids or present it to…
Hardware: 4 x M10 nuts (self locking) 1 x M10 Washer 1 x threaded rod M10 - 200mm lenght Threadlocker Settings: 0.20mm Standard +custom settings: Wall loops: min. 5 Outer wall: 25 mm/s Infill 30 % supports are not necessary ABS / PETG…
Ruler and marking gauge in cm/mm for woodworking. Comes in two lengths 10cm & 20cm with a hole at every mm. Background Searching for a ruler solution to marking wood before cutting, I found the model I remixed. Rebuilt the model from…
You may also be interested in my Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides - plus ¼"…
The model is about 8 cm in diameter. It serves no other purpouse than rotating in the wind and looking cool. The design uses a 608 bearing in the center of the turbine. All the parts should be idealy printed without support, especially…
When I design the Ultimate router jig, ( https://www.printables.com/model/847294-ultimate-router-jig) , I was not able to find a trim router base wich can be easiliy printable without support. For this reason I decided to design my own…
(Buy me a coffee if they are useful to you thanks :-) Tip Me Here 7 Pcs Set Radius Jig Router Templates, Router Templates for Woodworking "Only 6 in the photo but you will get 7 files" Corner radius jigs allow for easy and repeatable…
FNaF Working Spring Trap Head (updated)
Stiletto knife from CS2 / CSGO Fully functional Stiletto knife Open with the press of a button Sliding lock sprint for button Rotate top to release blade !IMPORTANT! The pieces marked red in the picture below and gif NEEDS to be printed…
In this model I tried to replicate the iconic Jeep gril. This model isn't the easiest to print but certainly looks cool. The chases has the axles built-in. The wheels are separate and can be printed in TPU. I printed it on its back with…
This ballista / Crossbow is really Fun! Simply insert the arrow and pull back until you hear it click into place, then when ready to fire squeeze the back prongs and watch it fire! I have gotten it to shoot as far as ~7m This print does…
In the woodwork shop we often need knobs to finish some Jigs. They can be very expensive so I dicided to print them on my Bambulab A1 3D printer. Aded metric M4 Bolt or Nut with 3 diferent diameters of the body - D20 , D 25 , D 30 Aded…
this a chest model remixed from DrLex all the instructions are on his original model page the photo was also from his original page to show what the model looks like when finished, (this was made originally for his godson because of his…
This Metric saddle t-square allows you to run lines parallel with an edge or perpendicular to it. It wraps around corners so you continue a line down an edge. The diamond shaped wholes keep your pencil centered to the line you're marking…
I printed with 40% infill ABS for better structural rigidity and heat resistance.
This little helper is often made from aluminium or quickly done with wood. However, I printed a bunch of them to be used with small clamps. Two sizes: 123x123 mm and 79x123 mm Print settings: No fill and no top and bottom layers, only…
how it works ----> https://youtu.be/-zSAygGtLZE <---- how it works I’m a huge Minecraft fan and I wanted something cool for my desk, so I built this functional Jukebox. It’s not just a plastic cube – it actually works! When you slide in a…
I like to keep things clean and protected, that's why I printed a hot shoe cover a while back then. This worked fine, but the cover did not only cover the hot shoe but also a little mechanism that tells the camera not to allow a usage of…
Been wanting to do a full size K2SO for my Man Cave for a while and I see there is a really cool one over here http://www.thingiverse.com/thing:2038000 ,but I found this really detailed model over with the guys on FacePunch.com "Only…
This is a working music box, just wind the handle and it will produce a song. This music box needs some assembly but it is relatively easy and fun, plus you get to watch the mesmerizing gears work. IMPORTANT For all of the following text…
This lock comes from a plan in the book "Making Wooden Locks" (Linden Publishing 2000) by Tim Detweiler. An excerpt of the wood plan can be found at: https://issuu.com/ksorsky/docs/big_book_of_wooden_locks I made this lock in wood many…
I present you first 3d printable Beyblade X stadium with Xtreme line, that works. Major features: -Central defense area with 2mm high wall allows bey to stay in center if you want it to -Reverse curvature. Outer ring of stadium is tilted…
I discovered the amazing Print-In-Place Working Cannon model from Makkuro . It's amusing and very well designed toy. I decided to add another projectile variant to this model. The default projectile is a simple sphere, so I created…
This is a tiny keychain cannon, ready to help you both in the office and at home. It has a spring to shoot cannon balls. Use the hinge to aim precisely. The cannon base holds one cannon ball securely in place, even if you toss it around…
This should be reusable, I would recommend PETG but pla has worked for me, just not for very many tries.
Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…
A simple holder for F clamps. Holds 4, 6, or 8 clamps and features holes to screw it to the wall. I print these with 3 walls for extra strength and 20% infill seems to be enough to hold even the heaviest of my clamps. Print Settings…
A simple solution to keep your cables organized on any standard equipment rack which includes, servers, networking equipment, and studio equipment. The model features 2 holes appropriately spaced for mounting anywhere on your rack. It…
This is a center finder for woodworking. With pencil holder and magnets for fixing. Printed on Creality K1C 300mm/s Infil 15% Required items: hexagonal pencil 3x 5mmx2mm round magnets
Attention : This print requires a very accurate printer, the tolerances are small ! You could scale it up, be then the springs should also be scaled up Instructions Required : Printed pieces : 1 x Cylinder 1 x Core → only piece that needs…
This is a fully 3d printed working drone flute. At 90% scale (the size I printed it as so it could fit on my build plate), this instrument is in the key of E. If you print it at 100%, I believe it is in the key of D, but I am not sure.…
I was disappointed with the other offerings for the A-180. So, I built one with 3D printing in mind and a working trigger! To improve on its aesthetics, I wanted to have a few parts to assemble after printing. It should be obvious where…
Some Spacers / Gauges / Setup Blocks for woodworking. These are really useful when building cabinetry and other projects. In addition to the different thicknesses, all blocks have outer 1" x 2" dimensions so can be used as gauges for…
The paddle was printed on a Bambu Lab P1P but should fit with any printer with 256x256mm. I will later add the design that allows you to print in a smaller printer. Make sure you have these settings on the individual parts: Top Paddle,…
Nice little gadget to help with clamping wood pieces that you are gluing together. You will need to print four of these to properly clamp two pieces of lumber together that you are gluing up. I hope you get some use from these. I printed…
hallo:) zuerst den stab mit barrel in den lauf schieben dann die abdeckung drauf und die abdeckung festschrauben
Easy to print fully working YoYo. Print in PETG for the best results. PETG is easy to sand in a smooth surface. Print with a little paint on support as shown in de picture. Use a m4 20mm bold and nut, to fit the two parts together. Print…
I described this as"scalable" rather than “parametric” - the clear opening dimension of the model is 25.5mm x 4.4mm and it's a very easy calculation to measure the size of your chisel and scale the relevant dimension in PrusaSlicer. Link…
find on makerworld for all info https://makerworld.com/en/models/434128#profileId-340078
Working Door Master Key from Murder Drones. There is a hole inside for an RFID card so you can use it with Arduino. In other files there is a pdf with the label for the floppy disk.
Simple setup blocks for woodworking in the Metric system. Several common types of wood thicknesses (6mm, 12mm, 18mm) are included as well as more generic ones. I included 1.45mm because that is the thickness of my saw blade. Blocks can be…
Please give this a like if you enjoy it! It will help me make more of them. This is a replacement for the TPU block that is used to hold the reed in. You can use any material with this spring style block. Tested in PLA and PETG, they both…
https://youtube.com/shorts/Jw6yVkRwt7k https://youtube.com/shorts/EY8BV4jkzCg This is a working, fully 3D printed ram pump! I used PLA for the main components and 95 shore TPU for the seals and valves. It has garden hose threads on the…
Simple stand to hold F style woodworking clamps on your bench with an included countersunk hole to allow mounting for an assembly fixture or something like that. Printed with .6mm nozzle and three perimeters and a 20% infill. No supports…
Remix of "A hot shoe cover designed to fit Canon EOS cameras perfectly." by JP that does not block internal flash.
Parametric woodworking marking-gauge (for 26mm ruler REMIX) need small nail Print Settings Supports: yes is better Resolution: 0.2mm ------ Happy Print to the whole community :)
=>This is a Kobra 3 Combo profile for Prusa Slicer . Finally. I made it mainly for non-planar printing and Arc Overhangs enthusiasts because my Kobra 3 did not support non-planar 3D printing at the moment. I could have charged for it, but…
1 x 45 degrees angle checker 1 x 90 degrees square Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: Prusament PLA Grey Notes: Any material does the trick. Category: Hand Tools
Router plane for woodworking joinery. BYO-chisel. Inspired by a youtube video by Rex Krueger: https://www.youtube.com/watch?v=-FdA0ImXjbI&t=2s&ab_channel=RexKrueger I printed 40% infill ABS for the router base and 40% infill PETG for the…
Please note that these patterns are for the final size of the strap. You need to make sure you cut a bit longer leather in order for you to be able to glue and fold for the springbars. Use the pattern to get the correct final size and…
