Wyniki wyszukiwania: wows

Sortowanie

206 modeli

P
PrintablesBram

Xiaomi Wowstick 1F+ #Gridfinity holder

Design description This is a gridfinity holder for the Xiaomi Wowstick 1F+ (plus) and its 56 bits. Also holds the base and (de)magnetizer. May also be compatible with the 1F Pro, not sure what the differences are. Based on ZachFreedmans…

Wydruk około 9,65 €–11,80 € nettoWstępna wycena jednego wariantu

Pobrania
1475
Polubienia
293
Ocena
4,92
P
Printablesneoyarus

Wowstick case with magnetic bit holders, parametric

Features Holds 56 standard bits + 9 Long ones (my kit has 52+4, so there are slots to spare) Holds the magnetizer/demagnetizer thingy Has a small pocket for carrying miscellaneous items, plus 7 more slots in the lid, where you can put…

Wydruk około 0,08 €–0,09 € nettoWstępna wycena jednego wariantu

Pobrania
508
Polubienia
139
Ocena
4,88
P
PrintablesBucuCZ

Wowstick + bits holder

update 13.3.2024 add Holder for Xiaomi Two version of wowstick holder A-Version Complet holder with backplate for wowstick, 52 normal 4mm bits and 4 long 4mm bits. all parts can be printed without supports. All for this version is marked…

Wydruk około 6,80 €–8,32 € nettoWstępna wycena jednego wariantu

Pobrania
35
Polubienia
5
Ocena
0
P
PrintablesQuesabyte

Wowstick Gluer - Gridfinity case

designed to use M3 20-22mm screws and heat inserts.

Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
34
Polubienia
8
Ocena
5
P
Printablesvaxxi

Wowstick Bits Case Upgrade (for magnets 5 x 1.5 - 2.0 mm)

Remix of https://www.thingiverse.com/thing:5229866 which is also a remix of https://www.thingiverse.com/thing:4091982 . Uses 5x5x2 mm (square) neodymium magnets.

Wydruk około 5,88 €–7,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
23
Polubienia
3
Ocena
0

USS St. Louis - official 3D printable model from WoWS

Cruiser USS St. Louis No supports needed Little to no glue Dozens of details & elements In-game St.Louis cruiser included World of Warships and Printables have joined forces to bring one of the most detailed models of a famous naval…

Pobrania
14 918
Polubienia
3279
Ocena
4,93
P
PrintablesAikano9

Rugged Multipart Wowstick Case (V2)

Remixed the "Rugged Multipart Pinecil/TS100/TS80 Case (V2)" to fit both of my Wowstick drill and screwdriver (1F), and all of the 52 bits, 4 long bits, and the 6 drill bits, as well as most of the accessories the accessories except for…

Pobrania
781
Polubienia
212
Ocena
4,88
P
PrintablesC4m3l

Wowstick 1F + Rugged Case

Update V1.1 (Loose fit .2mm each side) As some of You can have a problem with fitting inserts into box as it was realy tight fit, I've added an stl to a bit bigger box 0,4mm in x and 0,4mm in y so there will be .2mm on each side, it will…

Pobrania
754
Polubienia
250
Ocena
4,75
P
PrintablesNorkkon

Wowstick Frog Box

I hated the wowstick storage box so I tried to make mine as small as possible. This is a remix of the Frog Box 2.0 https://www.thingiverse.com/thing:4094861 , dude is a gem for making this F360 model available. So the bit holders are made…

Pobrania
499
Polubienia
127
Ocena
4,96
P
Printablesshrtcrct

WOWStick box

This fits up to 55 bits (long bits excluded), the WOWStick itself and the magnetizer/demagnetizer. This was drawn as the other alternatives were not working for my use case. You will need to hot glue 8 magnets to the corners (Size…

Pobrania
415
Polubienia
127
Ocena
4,75
P
Printablesloicloic

Wowstick Screwdriver Box Extender (Wow Stick)

Extend the box of your Wowstick electric screwdriver to fit the 3 tips tubes and the Wowstick itself. Need 8pce 5x1.5mm magnets https://www.aliexpress.com/item/1005002669769662.html Update: New version for 5x2mm magnets added. Need: Super…

Pobrania
402
Polubienia
135
Ocena
5
P
Printablescodysechelski

Gridfinity Xiaomi Wowstick Screwdriver Set Caddy

I know this probably goes against one of the Gridfinity Design Principles by keeping the bits in the tubes (less accessible), but in fairness, this is my backup screwdriver \_(ツ)_/ The screwdriver and tubes sit at an angle and have just a…

Pobrania
307
Polubienia
51
Ocena
5

Gridfinity: Xiaomi Wowstick 1F+

CHANGELOG: 26 Mar 2024: Added standard sized cutouts for 6x2mm magnets to desk stand (requested)

Pobrania
280
Polubienia
54
Ocena
5
P
PrintablesG-Hammer

WOWStick Case

A simple case created to hold the WOWStick and other bits and items. the magnets used are 6mm dia x 2mm from amazon. A piece of filament is used as the hinge mechanism.

Pobrania
267
Polubienia
52
Ocena
5
P
PrintablesTwxii

Wowstick 1F+ Case

Wowstick 1F+ that holds all bits including long bits and some other accessories. It uses 6x 5x3mm magnets in each half to keep it closed. If you have larger fingers, it may be harder to grab the bits because they are fairly close…

Pobrania
199
Polubienia
47
Ocena
5
P
Printablesledsi

Xiaomi Wowstick Holder - IKEA Skadis - Easy Print

Wowstick Holder for IKEA Skadis Pegboard. Easy to print. Just print the hooks separate flat on your printbed and glue it on the holder. No supports or worries with broken hooks or no removable support. Print → glue → hook

Pobrania
193
Polubienia
51
Ocena
4,75
P
PrintablesHedjemunkee

HSW Wowstick 1F+

Wall mount for the Wowstick 1F+ for the Honeycomb Storage Wall. Needs supports, print at .2.

Pobrania
190
Polubienia
32
Ocena
5
P
Printableskjbturok

Ikea skadis or similar Wowstick stand

Support with and without hooks for the Wowstick S1 electric screwdriver. This is a remix of the user obuslive. https://www.thingiverse.com/obuslive/designs -The size and use of filament for printing has been reduced. -It has been added…

Pobrania
181
Polubienia
16
Ocena
0
P
PrintablesVegar

Xiaomi Wowstick 1F+ #Gridfinity holder - Modified

Slightly modified version of Bram's great wowstick orginizer. Here is the list of midifications: Widened hole for (de)magnetizer since it was too narrow for mine to fit. Original: 26.0mm New: 27.5mm Implemented “ floating hole hack ” for…

Pobrania
177
Polubienia
30
Ocena
4,83
P
PrintablesMalaki

Wowstick holder for skadis peg board

This is a remix of Corruto's wowstick holder adapted to fit on a Ikea Skadis Pegboard, printed in JAYO White PLA Supports: Yes, i used the new tree supports in the cura beta 5.3.0-Alpha-Xmas Layer Height: 0.2

Pobrania
172
Polubienia
33
Ocena
5
P
PrintablesSteve Hodge

Wowstick Bit Storage

Yet another bit storage for the Wowstick 1F+. I wanted storage which identifies each bit. The holes for the bits have a spring mechanism which gives them some grip without being too tight (though they will loosen over time). There are a…

Pobrania
166
Polubienia
42
Ocena
5
P
PrintablesH85

Wowstick Holder

This is a remix of the two best designs for the Wowstick I could find. Print instructions Category: Tool Holders & Boxes Summary This is a remix of the two best designs for the Wowstick I could find.

Pobrania
155
Polubienia
20
Ocena
3
P
PrintablesJustin Williams

HSW Xiaomi Wowstick Electric Screwdriver Case Holder

Case holder designed to fit the Xiaomi Wowstick Electric screwdriver with 26 bits. My print didn't go as cleanly as I had hoped (probably low temperature issue), but, I was able to repair it with my 3d Pen, until I can re-print. Fits on…

Pobrania
141
Polubienia
16
Ocena
5
P
Printables3D_FAB_VINCE

wowstick 1F organizer

Organizer for the wowstick 1F and all the bits The base supplied with the screwdriver come inside the printed piece There are identified spaces for each bit + 10 more on top for the spares Print instructions printer in PLA layer: 0.3mm…

Pobrania
137
Polubienia
33
Ocena
4,75
P
PrintablesRuiaxe

Wowstick 1F+ 56 Bits Box

Its a box for my bits..., Its a Bits Box! The original "case" that came with the Wowstick is pretty but not functional (in my opinion), so I made this one. It holds 52 shorter bits and 4 long ones. A final word for the hinges: I used a…

Pobrania
136
Polubienia
23
Ocena
0
P
PrintablesCorruto

Wowstick organizer

I use my screwdriver a lot and was tired of not having a holder for the tubes with bits, So I designed a simple holder for my Wowstick and the 3 tubes with bits.

Pobrania
135
Polubienia
31
Ocena
5
P
PrintablesAfruzu

Bit holder box for ELECTRIC PRECISION SCREWDRIVER XIAOMI WOWSTICK 1F +

I bought the fantastic XIAOMI WOWSTICK 1F + lithium electric precision screwdriver and, as more and more often happens with Chinese hi-tech products, I admired the fantastic packaging and the completeness of the accessories, including a…

Pobrania
131
Polubienia
22
Ocena
0
P
PrintablesMatiAb

Wowstick Case

This is a case for the Xiomami Wowstick screwdriver

Pobrania
128
Polubienia
12
Ocena
5
P
PrintablesRagaroah

Wowstick 1F + - Lid with logo

Wanted to include the Wowstick logo on the lid, so here's the lid with the logo cut out. Both tight and loose fit available.

Pobrania
122
Polubienia
27
Ocena
5
P
PrintablesNick Largent

Gridfinity Wowstick Stand

Just a basic stand for the Wowstick and 8 bits. Based on the Gridfinity Refined set for press fit magnets and center thumb screw. Holes are oversized for a loose fit and quick access. Modeled around the Wowstick 1F Pro model. An alternate…

Pobrania
120
Polubienia
22
Ocena
5
P
Printablesskarfacegc

Gridfinity wowstick stand

Simple model, slice, print, go. Holes are 17mm in diameter, so this would work fine for other applications that need 17mm holes.

Pobrania
116
Polubienia
30
Ocena
5
P
Printablesbitlischieber

Wowstick Holder

Just a small Wowstick tool holder ( https://www.aliexpress.com/wholesale?SearchText=wowstick ). It hold despite the stick itself 3x13 bits, which is enough for the standard plus an additional set...an one slot spare. Front compartment…

Pobrania
114
Polubienia
10
Ocena
4,67

Xiaomi Wowstick 1F+ Individual Holder for Honeycomb Storage Wall (HSW)

Xiaomi Wowstick 1F+ Individual Holder for Honeycomb Storage Wall (HSW) Wowstick is one of the most favourite electric screwdriver used by Mini 4WD hobbyist. So i remixed Enahs' Parametric Circle Bin to create a ready to print file. Tested…

Pobrania
114
Polubienia
20
Ocena
5
P
PrintablesBoomRMX

IKEA Skadis - Electric Screwdriver Mount (Wowstick)

I like the design from krisennerd and want the same for my electric screwdriver (like wowstick but not from xiaomi). Make sure the outer diameter from your screwdriver is ~15.50mm

Pobrania
111
Polubienia
11
Ocena
5
P
PrintablesFrenchyAU
Pobrania
111
Polubienia
18
Ocena
0
P
PrintablesCodingKiwi

Xiaomi Wowstick 1F+ Case with bit holder

Keep your Wowstick secure and organized with this custom-designed 3D printed case! Specifically made to hold the Wowstick precision screwdriver tool and its bits, this case provides a convenient and protective storage solution for makers…

Pobrania
108
Polubienia
77
Ocena
5
P
PrintablesZiemniaczenka

Wowstick stand Thor hammer

It's edit of some other model i found on thingiverse few years ago, don't know which exactly. V2 - slightly bigger, remodelled with Mjöllnir as a base, still using STL so mesh still isn't optimal. I'm adding step if somebody cares and…

Pobrania
107
Polubienia
19
Ocena
4
P
PrintablesAzopack

Skadis Wowstick

Hi, I made this wowstick screwdriver holder for the IKEA Skadis.

Pobrania
103
Polubienia
24
Ocena
0
P
PrintablesTTGeek

WowStick 1F+ Skrewdriver Stand

Its a tight fit for the wow stick metal stand, but you can gently push it into the print. Print instructions Print with pla.

Pobrania
101
Polubienia
18
Ocena
5
P
PrintablesGuym

Wowstick magnetic bits holder

Wowstick bits holder : each bit and screw driver have this own magnet. You'll need 20 round magnets 5*1mm for the bits 1 round magnet 10*2 for the screw driver Magnets are'nt glued just push hard on them Based on Heliox's idea, but with a…

Pobrania
95
Polubienia
16
Ocena
5
P
PrintablesSquareMesh

HSW Holder - Wowstick 1F with extra bits

Holder for Wowstick 1F and screw bits in tubes with option for frequently used screw bits. Features Wowstick space has hole to support USB-C cable Simple holder, just tubes no extra bits Holder, with space for 5 or 9 frequent screw bits…

Pobrania
92
Polubienia
13
Ocena
0
P
PrintablesTonky

Wowstick holder for Skadis (universal hook)

This is a simple, no supports needed (if your printer can bridge well), wowstick holder for the ikea skadis pegboard. It has now been updated to use a universal hook (included in files). Infill: whatever you want Support: Optional Layer…

Pobrania
92
Polubienia
11
Ocena
0
P
PrintablesIsBit

Compact gridfinity holder for Wowstick

A compact gridfinity holder for the Wowstick electric screwdriver and it's bits and cap. It took me around 2 hours to print on my Voron with 2 walls and 10% infill. A step file is included.

Pobrania
88
Polubienia
17
Ocena
0
P
PrintablesM1150

Wowstick SD Case

This is a case for the Xiaomi Wowstick SD, which seems to be less popular than the more common Wowstick 1F series. I had chosen the SD over the 1F because I wanted more torque to be able to drive screws into prints and because it is…

Pobrania
85
Polubienia
25
Ocena
4,33
P
PrintablesBader

WoWstick fix

So the buttons of wowstick fell off, and the little piece that held it from the inside is broken , so i made buttons that are held from the outside.

Pobrania
84
Polubienia
26
Ocena
5
P
PrintablesBalooDK

Honeycomb Wall WOWstick Holder

When I sliced the original, I ended up with a weird hollow print. Fixed the hollow body and changed the mounts to full inserts Buy me a coffee

Pobrania
84
Polubienia
34
Ocena
0

Xiaomi Wowstick Box

This is a simple box for my Wowstick and all screwdriver bit. It's a box clips. The model was made for a multicolored filament. Print Settings Supports: No Filament: Arianeplast PLA Rainbow or not Category: Tools

Pobrania
82
Polubienia
18
Ocena
5
P
PrintablesStephan Müller

Hex-Bit Case (WowStick)

This is a case for 52 hexbits with a diameter of 4mm. I designed it for my bits of the WowStick. The size of each hole is 4.5mm to ensure a loose fit. Print Settings Printer: SparkCube Rafts: No Supports: No Resolution: 0.2mm Infill: 20%…

Pobrania
82
Polubienia
3
Ocena
5
P
PrintablesAkinayr

Wowstick 1F+ Kit HSW w/ charging!

I wanted a nice clean all encompassing storage solution for my wowstick that would work on the Honeycomb Storage Wall and hopefully allowing for charging. I couldn't find onw that was clean, compact, stored everything (including magnetic…

Pobrania
78
Polubienia
12
Ocena
5
P
PrintablesRalph Smeets

Gridfinity Wowstick 1F+ 6u height

I really like the original design. However, after printing, I found out that the demagnetizer is sticking out and it's difficult to stack another gridfinity block on top of it. Also, I want to use it in combination with 6u high storage…

Pobrania
77
Polubienia
13
Ocena
5
P
PrintablesMichael Kilo

Honeycomb (HSW) Wowstick Screwdriver and Bits (parametric)

I wanted to attach my Wowstick as well as a manual handle for the precision screwdriver bits to my honeycomb storage wall . I added the FreeCAD file. The spredsheet has explaining hints. Beware, I cannot guarantee that all combinations…

Pobrania
75
Polubienia
6
Ocena
5
P
PrintablesMRDeu

Wowstick Holder

A Xiaomi Wowstick holder, enjoy it.

Pobrania
75
Polubienia
11
Ocena
5
P
Printablesj0shi

Wowstick Mini Precision Cordless Drill holder for #gridfinity

This is a gridfinity holder for the Wowstick Mini Precision Cordless Drill

Pobrania
75
Polubienia
15
Ocena
0
P
Printablesmdalacu

WOWSTICK Case

This is a box that i have created to store my Xiaomi WOWSTICK. It uses no magnets and it is pretty compact (196x42X25mm). I hope you find it useful.

Pobrania
74
Polubienia
12
Ocena
5
P
PrintablesLucMeister

Wowstick Holder with Bit-Storage for IKEA Skadis

This holder for the IKEA Skadis pegboards is made around the original Wowstick stand. Separately, you can print a Bit-holder for 24 of your most used Bits; both items will also work individually. Print the Hooks lying down for ideal…

Pobrania
73
Polubienia
13
Ocena
5
P
PrintablesOlegD

Wowstick Holder for Ikea Skadis Pegboard (Low-Profile T-Clip Mount)

This 3D-printed Wowstick holder is designed to seamlessly integrate with your Ikea Skadis pegboard. To install this holder, you will need 2 low-profile T-clips. You can find these clips there , ensuring a secure and stable mounting…

Pobrania
73
Polubienia
9
Ocena
0
P
PrintablesBastR

Wowstick F1+ honeycomb mount

I don't record why but I need one more mount for the X0 tube, so I make it. I've added a slot on the back to hold the magnetic pad.

Pobrania
71
Polubienia
16
Ocena
0
P
PrintablesBrian Flores

Electronics Tools Holder for Wowstick, Grinder and more

I made a custom electronics tools holder for all of my tools. - Wowstick - Grinder Pen - Xacto - Spudger - Twezzers - Screwdrivers - Brush - Prying tools - Bits - Front pocket to hold misc.

Pobrania
70
Polubienia
11
Ocena
0
P
Printablesrh45

TOYO STEEL T-190 Toolbox Organizer Trays (Wowstick, Tools & Parts Storage)

TOYO STEEL T-190 Toolbox Organizer Trays Designed custom organizer trays for the TOYO STEEL Trunk Toolbox (T-190 series) to efficiently store and organize tools, small parts, and accessories. These trays fit perfectly inside the toolbox…

Pobrania
69
Polubienia
11
Ocena
0
P
PrintablesTobias0530

Case for Wowstick 1f+ in rugged box

I previously printed Twxii's beautiful case for the Wowstick 1f+ set. Then I thought I should have this in a rugged case - so I customized Rainer Backes parametric rugged box to fit the case snugly. I actually fits so well you don't even…

Pobrania
69
Polubienia
12
Ocena
0
P
PrintablesGiorgio Miglia

Wowstick 1F Skadis mount - T nut system

As described by title, it's a storage for Wowstick on the Ikea Skadis pegboard. The alignment guides are designed to be printed without supports. The holes are all the same but the one on the left is for the screwdriver as it is open on…

Pobrania
67
Polubienia
13
Ocena
4,67
P
Printablesjackmanbob

Gridfinity Wowstick 1F+ LITE

The Lite version nixes the screwpad, but keeps the holder and fits in a 2x6 footprint. The Xlite version cuts out both and fits in a 2x5 space.

Pobrania
67
Polubienia
8
Ocena
5
P
PrintablesMr-J

Wowstick 1F+ Handle Grip

I found the anodised finish on the handle of my Wowstick 1F+ to be a bit slippery when manually tightening/loosening screws. So I made a handle grip to go over the Wowstick to make it feel more like a traditional screwdriver. It has a…

Pobrania
66
Polubienia
19
Ocena
0
P
Printablesswilkes

(TPU) Insert Bits Tighter Tolerances for Aikano9s Rugged Multipart Wowstick Case (V2).

I have shortened the depth of each of the holes in order to make it easier to remove the bits. Printed in TPU.

Pobrania
66
Polubienia
22
Ocena
5
P
Printablesbangbang

T80 Solder Case remix from wowstick case

T80 Soldering Case remix from wowstick case Remix from https://www.printables.com/model/175374-wowstick-frog-box

Pobrania
63
Polubienia
10
Ocena
0
P
Printablesbrandido2002

wowstick honeycomb mount

added v2 that has a bit thinner back side to save on filament.

Pobrania
62
Polubienia
18
Ocena
0

Grifinity Wowstick Magnetic Bit Holder

This is a holder for Wowstick bits, meant to fit in to the Gridfinity organization system. It uses magnets to hold the bits in place, but has material between the bit and the magnet, allowing the magnets to function, but not be so strong…

Pobrania
61
Polubienia
13
Ocena
5
P
PrintablesAlex S

Wowstick Mini Precision Cordless Drill holder for #gridfinity 2 bit holders

A gridfinity holder for a wowstick drill, with space for 2 sets of bit holders. Props to j0shi for the original design. I just duplicated the bit holder cutout.

Pobrania
60
Polubienia
7
Ocena
0

Xiaomi Wowstick gridfinity holder

There were quite some Wowstick cases already, quite some gridfinity inserts, but not the one I needed. It has exactly enough space for the basic bit set, it allows you to store the wowstick with bit in it, all bits are in sight and it…

Pobrania
60
Polubienia
5
Ocena
0
P
PrintablesAKKOÇ

Wowstick Case 1

Wowstick Case 1

Pobrania
58
Polubienia
9
Ocena
5
P
PrintablesBlueshirt

Wowstick Gridfinity holder

A 5x1x6 gridfinity holder for the Xiaomi Wowstick and that holds the bits vertically so if it is in rugged gridfinity box the bits don't fall out. The spacing is hard to use but the wowstick has a magnet that can if you insert a bit…

Pobrania
58
Polubienia
12
Ocena
0
P
PrintablesJindra7

Wowstick holder honeycomb wall

Tisknul jsem ho z pet g 0.35 vrstva podpěry jen na podložce, na ležato a je to za 22 minut.

Pobrania
57
Polubienia
11
Ocena
0
P
Printablesaudi5000

HSW Wowstick Holder

I wanted the solid holes to place the wowstick and the bits. The open clamps dropped the items to easy. Also I wanted something that stored the map too.

Pobrania
57
Polubienia
9
Ocena
5
P
PrintablesPappel

WOWSTICK Case for Gridfinity bin 5x2

This is a case for storing the Wowstick and all its bits. I've used a basic 5x2 gridfinity bin generated in Fusion 360. I have also included a test piece so you can print it beforehand to test the fit of the bits on the case. I recommend…

Pobrania
56
Polubienia
12
Ocena
0
P
PrintablesFeroc

Euro Pegboard Wowstick Holder

Works for my Euro pegboard. Holes have a diameter of 5mm and are 1,5cm apart. Printed upside down with supports.

Pobrania
55
Polubienia
4
Ocena
0
P
Printablesroomonthethird

Screw Tray for Wowstick Magnetic Mat/Pad

I remixed this design: https://www.thingiverse.com/thing:3284607 I merged two screw trays together then extended to base to cut away space for the magnetic pad. Allows you to secure the screw pad to the screw tray! -- Printed in Simpson…

Pobrania
54
Polubienia
9
Ocena
0
P
PrintablesSam

Bit Test for Aikano9's Rugged Multipart Wowstick Case (V2)

This is a small test print so that you can test your printer / choice of material's tolorance when chosing to print Aikano9's inserts (as of 14.09.23). It may work for other models that use the same inderts but your milage may vary. L =…

Pobrania
54
Polubienia
4
Ocena
5
P
Printablestika

Skadis wowstick with pegs

remix with addition of printable pegs

Pobrania
52
Polubienia
4
Ocena
5
P
PrintablesRazziaDK

Wowstick Gluer IKEA Skådis mount

I purchased a Wowstick Gluer - a hot stick glue gun that only supports 7mm hot glue sticks with a length at max 35mm. So I designed a small jig that can help cut cheap hot glue sticks to the correct length. Then I decided that I wanted to…

Pobrania
52
Polubienia
8
Ocena
5

Xaiomi wowstick

Magnet 4x2mm

Pobrania
51
Polubienia
17
Ocena
5
P
PrintablesSerhii Ra

Compact Xiaomi Wowstick Bit Case

Fusion 360 file is also available

Pobrania
50
Polubienia
6
Ocena
5
P
PrintablesRubyRoid

Xiaomi Wowstick 1F+ Gridfinity holder with more space

The original version didn't fit my metal stand so I enlarged it and moved a bit so you can still put a 4x2 bin on top. Comes in two versions for 25mm and 27mm wide (de)magnetizer. I printed mine in PETG and this stuff likes to curl on…

Pobrania
49
Polubienia
10
Ocena
0
P
Printablesjufy111

Gridfinity WowStick and bit holder

2x2 Gridfiinity bin (6U height) to hold Wowstick and bits. Will hold the Wowstick vertically with a bit installed Made to fit all the regular sized bits and still be stackable (you'll have to find something else to do with the longs bits.…

Pobrania
49
Polubienia
6
Ocena
5
P
PrintablesBader

wowstick case

A compact case for wowstick and its 64 bits. P.S use filament (1.75mm) for the hinges and magnets (6.30mmx1.45mm) for the led "but not necessarily" Print instructions Category: DIY Print Settings Printer Brand: Prusa Printer: i3 MK3…

Pobrania
46
Polubienia
7
Ocena
0
P
PrintablesChristos

xiaomi wowstick 1p+ holder

A simple holder for the wowstick 1p+ Print instructions Stock slic3r settings

Pobrania
45
Polubienia
5
Ocena
0
P
Printableskdach

Wowstick Case/Box

Case/Box for Wowstick and 3 tube of bits, with place for magnetizer / demagnetizer. Also have 3 magnets 8x2mm on the back for different use. With the vase mode stl, I recommend using this seetings : 0% infill 5 bottom layers 2 perimeters…

Pobrania
45
Polubienia
6
Ocena
0
P
PrintablesKAD370

Wowstick 1F+ box upgrade

Simple box upgrade to fit all bits inside of housing for Wowstick 1F+. No supports needed, since they are integrated in design. Part must be printed at 0,15mm layer height to get supports off! You will need to rotate design in slicer, to…

Pobrania
44
Polubienia
6
Ocena
5
P
Printablesalexan_e

WOWStick box 180mm version

I was not able to print the original model in my printer because my table is 180mm x 180mm so I have remixed the model to fit in 180mm tables. I kept the basic parts, the tips and the screwdriver. I also added two hinges on one side and…

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesAmmar

[BaBo] Xiaomi Wowstick with bits (2 x 7)

This is a BaBo insert for the Xiaomi Wowstick and it is 56 bits. It also holds the (de)magnetizer. The current version (V1) only supports one color. However, a pause feature has been added so that you can change the filament to any color…

Pobrania
44
Polubienia
3
Ocena
0
P
PrintablesRalf67

Ikea Skadis Halter für Wowstick (oder Ähnliche) - Ikea Skadi's holder for Wowstick (or similar)

Ich habe ein kompaktes Aufbewarungssystem für den Wowstick (oder Ähnliche) inkl. 48 Bits Halter und Anschluss des USB Ladestecker für direktes aufladen in der Halterung entworfen. Hab erst nach dem Druck festgestellt das ich etwas mehr…

Pobrania
42
Polubienia
5
Ocena
0
P
Printablesphase3d

Wowstick 1F+ Precision Screwdriver Base

Simple base for your Wowstick that holds all 3 sets of bits and the included aluminum base. Modeled for better desk organization. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill:…

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesRagaroah

Wowstick 1F + - Seal

Seal for the Wowstick 1F + rugged box

Pobrania
40
Polubienia
8
Ocena
5
P
Printablespartypancake8

Wowstick organizer and parts tray

Organizer for the Wowstick electric screwdriver. The organizer holds the Wowstick, 30 bits (four spots are for the extra-long drivers), and the magnetizer/demagnetizer. In addition, it also has a parts tray for screws and such.

Pobrania
39
Polubienia
9
Ocena
0
P
PrintablesAKKOÇ

Wowstick Case 2

Wowstick Case 2

Pobrania
39
Polubienia
9
Ocena
0
P
PrintablesBinthem

Gridfinity refined wowstick holder

A remix of the wowstick holder to make it integrate with gridfinity refined. This version uses 6x3mm magnets instead of 6x2mm

Pobrania
39
Polubienia
4
Ocena
5
P
PrintablesDylanHP

Gridfinity wowstick try

just a simple holder for wowstik try and its bits

Pobrania
39
Polubienia
3
Ocena
0
P
PrintablesProjectsByBrian

Wowstick Wall Mount

Wowstick wall mount. I used #10 screws which may be a little overkill. The Fusion file is included if you want to modify the screw hole size, or any other part of the design. Category: Tool Holders & Boxes

Pobrania
38
Polubienia
10
Ocena
4,67
P
PrintablesBootStrap

WowStick - Wall Mount

Simple little print to organize your workshop. Printed with PLA no supports required.

Pobrania
37
Polubienia
5
Ocena
5
P
PrintablesRoger Arbogast

Wowstick 1F+ Electric Screwdriver Conical Base

The stock Wowstick base allows the screwdriver to easily topple over. This replacement base remedies that deficiency. The model is posted in both 3MF and STP formats.

Pobrania
37
Polubienia
6
Ocena
0
P
PrintablesGage Cullum

Wowstick Bits (4mm) to Standard Hex (6.4mm)

Adapter that allows Wowstick drill bits (4mm) to be used with standard drill/driver hex receiver (6.4mm/0.25").

Pobrania
37
Polubienia
4
Ocena
0