Wyniki wyszukiwania: xle

Sortowanie

1168 modeli

P
PrintablesRobagon3D

Axle Benders for Pinewood Derby Cars

I've designed two different print in place support free axle benders for pinewood derby cars. They are used to bend standard axles, 0.087 inches in diameter by 1 inch long. One is a hardware free version that bends a single angle ~ 3…

Pobrania
866
Polubienia
55
Ocena
4,4
P
PrintablesPrism08

Portal axle for UNIMOG RC (1/10 scale)

I'm releasing the second subset of my future RC car (a 1/10 UNIMOG chassis as accurate as possible - that's the goal !). The first subset was a limited slip differential you can find at…

Pobrania
584
Polubienia
94
Ocena
0
P
PrintablesThijs

WPL Axles

This is a rear axle for the C24, B16 and probably other vehicles by WPL. You need to have the metal parts; bearings, rod, gears, etc. It may also work with the stock parts. The margins are tricky, you may have to do some post processing…

Pobrania
511
Polubienia
77
Ocena
0
P

Philips Speedpro Max brush axle

Had success printing it in ABS, PETG was to weak and snapped.

Pobrania
439
Polubienia
20
Ocena
5
P
PrintablesTreetech

Dino-Clip with printed snap-together axles - REMIX

Print the dino-clip in place without supports. Print two sets of axles for each hole with supports. Works great at 0.2mm. Set Infill to any percentage, I am using 20%. Works best to insert both outer axle pieces at the same time or do the…

Pobrania
388
Polubienia
59
Ocena
3,5
P
Printablesbjamdesign

Bike - Wall Mount for Thru-axle bikes

A mount to support a thru-axle bike vertically against a wall. Take off your front wheel, roll your bike to the wall, and push. Important Notes - Use at your own risk. Be aware of cranks/pedals! Pedals will inevitably ding a wall, your…

Pobrania
383
Polubienia
83
Ocena
5
P
PrintablesBailey Qualey

wpl c24 servo axle mount with 10mm lift

an axle mount for the steering servo that also adds a 10 mm lift wpl c24 or c14

Pobrania
90
Polubienia
12
Ocena
0
P
Printablesjankaspar

MN82 RC axle hook left / right

Axle hook left and right for RC model MN82s and MN82.

Pobrania
85
Polubienia
13
Ocena
5
P
PrintablesFilamentjuppi

Wheelbarow axle adapter

Bought a new wheel for my wheelbarow and the new wheel had a bigger diameter for the axle than the old one. So could buy a new axle or print a adapter. So here is my adapter. I used some ‘long live lube’, but anything should do. Can be…

Pobrania
26
Polubienia
2
Ocena
0
P
PrintablesMatsBSwe

Mod of RepRewind for Repbox to fix spring to axle properly

Fixed the axle to ensure the wheels are not scarping against the sides of the holder and fixed the axle so it locks the spring properly. It all works nicely now! Many many thanks to Joe Mike Terranella for his original remix of the…

Pobrania
23
Polubienia
1
Ocena
0
P
Printableslame

Bike / MTB Thru axle / Quick Release adapter for truing stands

I own an old truing stand, which supports Quick Release Wheels only. Therefore I developed some "dummy thru axles" which can be used as a adapter for this truing stand. The dummy axles have a handle at one side for a easier…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesBeergames5

Lego Axle

I made Different sizes Lego axles

Pobrania
2626
Polubienia
75
Ocena
4
P
PrintablesVít Budina

Print-in-Place Modular Truck - Base - Single Rear Axle

This is a modification of my original Print-in-Place Modular truck with just one rear axle. Modules for transporting lower weight cargo (e.g. freight box, car transporting platform etc.) fit this the best. Wheels spin, engine compartment…

Pobrania
2043
Polubienia
334
Ocena
5
P
PrintablesMalcolm

Chain Keeper 12mm Thru Axle - Bicycle Cleaning Helper

Keep your chain on fake cogs to help with chain cleaning after taking off rear wheel. This tool fits 12mm thru axles. Sized with slop to allow shifting of the derailleur. No reason to pay $$ for one from Park Tool etc.. No overhangs, no…

Pobrania
1773
Polubienia
263
Ocena
5
P
Printablesthall72

Lego Compatible (32062.dat) Technic Axle 2 Notched

This model is compatible with the lego system.

Pobrania
1641
Polubienia
103
Ocena
5
P
Printablesthall72

Lego Compatible (3706.dat) Technic Axle 6L

This model is compatible with the lego system.

Pobrania
1628
Polubienia
97
Ocena
4,5
P
Printablesthall72
Pobrania
1625
Polubienia
70
Ocena
0
P
Printablesthall72

Lego Compatible (3705.dat) Technic Axle 4L

This model is compatible with the lego system.

Pobrania
1533
Polubienia
82
Ocena
4,67
P
Printablesthall72
Pobrania
1481
Polubienia
106
Ocena
5
P
Printablesthall72

Lego Compatible (43093.dat) Technic Axle Pin with Friction

This model is compatible with the lego system.

Pobrania
1379
Polubienia
82
Ocena
5
P
Printablesdaxhen

Technic Axle LEGO Brick (Real LEGO)

All normal LEGO Brick from the application LEGO Studio. 21 real Bricks LEGO (with the logo on it)

Pobrania
1240
Polubienia
65
Ocena
5
P
PrintablesDan Lee

1/10 Scale RC Crawler Axle Stands (Jack Stands)

Axle stands to display your 1/10 scale RC crawler without worrying about getting flat spots on your tires. Keeping the load on the suspension instead of the center skid plate helps to keep the normal ride height - it just looks cooler.…

Pobrania
1235
Polubienia
162
Ocena
5
P
Printablesthall72

Lego Compatible (6536.dat) Technic Cross Block 1 x 2 (Axle/Pin)

This model is compatible with the lego system.

Pobrania
1129
Polubienia
61
Ocena
0
P
Printablesthall72

Lego Compatible (22961.dat) Technic Axle with Perpendicular Pin Hole

This model is compatible with the lego system.

Pobrania
1094
Polubienia
86
Ocena
5
P
Printablesthall72

Lego Compatible (4519.dat) Technic Axle 3

This model is compatible with the lego system.

Pobrania
1052
Polubienia
60
Ocena
3,5
P
Printablesthall72

Lego Compatible (3749.dat) Technic Axle Pin

This model is compatible with the lego system.

Pobrania
1036
Polubienia
97
Ocena
0
P
Printablesthall72

Lego Compatible (42003.dat) Technic Cross Block 1 x 3 (Axle/Pin/Pin)

This model is compatible with the lego system.

Pobrania
1004
Polubienia
64
Ocena
0
P
Printablesthall72

Lego Compatible (4032.dat) Plate 2 x 2 Round with Axlehole

This model is compatible with the lego system.

Pobrania
982
Polubienia
51
Ocena
4
P
Printablesthall72
Pobrania
961
Polubienia
54
Ocena
5
P
Printablesthall72

Lego Compatible (57909.dat) Brick 2 x 2 with Ball Joint and Axlehole

This model is compatible with the lego system.

Pobrania
892
Polubienia
56
Ocena
4
P
Printablesthall72

Lego Compatible (59443.dat) Technic Axle Joiner Inline Smooth

This model is compatible with the lego system.

Pobrania
867
Polubienia
68
Ocena
0
P
Printablesthpoll

Earth with Lego Axle Hole

Earth with a Lego axle hole at the bottom so that it can be used with this Lego orrery: https://rebrickable.com/mocs/MOC-11790/Kaero/planet-orrery-with-shining-sun-mod I printed the earth in two halves and glued them together afterwards.…

Pobrania
867
Polubienia
43
Ocena
5
P
PrintablesSeaHamsterr

Lethal Company | Employee with Large Axle

Model height ~ 4.6 cm Model can be scaled up and down. ( for smaller prints i recommend using something like "horizontal expansion" in Cura at 0.3mm) 3D PRINTING SETTINGS Layer Height: 0.1 - 0.2mm Wall Thickness: 0.8 - 1.2mm Infill…

Pobrania
843
Polubienia
95
Ocena
4,75
P
Printablesthall72
Pobrania
841
Polubienia
64
Ocena
0
P
Printablesdaxhen

Technic Axle and Pin Connector LEGO Brick (Real LEGO)

All Technic Axle and Pin Connector LEGO Brick from the application LEGO Studio. 13 real Bricks LEGO (with the logo on it)

Pobrania
836
Polubienia
53
Ocena
5
P
Printablesthall72

Lego Compatible (3737.dat) Technic Axle 10L

This model is compatible with the lego system.

Pobrania
812
Polubienia
64
Ocena
5
P
Printablesthall72
Pobrania
797
Polubienia
72
Ocena
4,25
P
Printablesthall72

Lego Compatible (3707.dat) Technic Axle 8L

This model is compatible with the lego system.

Pobrania
785
Polubienia
66
Ocena
5
P
Printablesthall72

Lego Compatible (32073.dat) Technic Axle 5

This model is compatible with the lego system.

Pobrania
783
Polubienia
58
Ocena
5
P
Printablesthall72

Lego Compatible (3708.dat) Technic Axle 12L

This model is compatible with the lego system.

Pobrania
776
Polubienia
65
Ocena
0
P
Printablesthall72

Lego Compatible (32184.dat) Technic Cross Block 1 x 3 (Axle/Pin/Axle)

This model is compatible with the lego system.

Pobrania
775
Polubienia
61
Ocena
3,5
P
PrintablesTomKnox

Lego Technic Axles

You can support my work and buy me a coffee here: Buy me a Ko-Fi! It helps more than you know! Most common 73 parts are included: 3704 Black Technic Axle 2 3705 Black Technic Axle 4 3705 Green Technic Axle 4 3705 MdStone Technic Axle 4…

Pobrania
758
Polubienia
34
Ocena
0
P
Printablesthall72

Lego Compatible (24316.dat) Technic Axle 3 with Stop

This model is compatible with the lego system.

Pobrania
724
Polubienia
50
Ocena
0
P
Printablesthall72

Lego Compatible (73230.dat) Technic Brick 1 x 1 with Axlehole

This model is compatible with the lego system.

Pobrania
681
Polubienia
52
Ocena
5
P
PrintablesSren232

KTM 690 SMC R Achsschutz hinten / KTM 690 SMC R Axlesliders rear

Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 315mm absägen, die Achsschraube mit einer 32er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…

Pobrania
677
Polubienia
48
Ocena
0
P
Printablesthall72
Pobrania
662
Polubienia
49
Ocena
4
P
PrintablesOverengineering

Trophy Truck V3&4 solid rear axle 1/10 1/9 RC Car

You will need six 18x12x4mm bearings, M3x12 screws, M3 nuts and two M4x16 screws and two M4 Nuts. I recommend to use 8mm aluminium hex rod to make the axle, instead of the printed hex rod. The rims get screwed together by tiny 2x10mm wood…

Pobrania
613
Polubienia
94
Ocena
5
P
Printablesthall72

Lego Compatible (87083.dat) Technic Axle 4 with Stop

This model is compatible with the lego system.

Pobrania
610
Polubienia
34
Ocena
0
P
Printablesgenesis

Lego Technic Axle 200mm

Lego Technic axle 200mm

Pobrania
604
Polubienia
44
Ocena
5
P
Printablesthall72
Pobrania
591
Polubienia
43
Ocena
5
P
PrintablesEsotericMaker

Air tight filament dry box - air-tight Collet, TPU Gaskets, Plastic Axles, No MMU2s side leg

The combination of replacing the “kludgy” filament slot with an air-tight collet with gasket and PTFE tubing along with adding a gasket to the base groove and sealing the humidistat/thermostat with silicon makes the case near air-tight –…

Pobrania
581
Polubienia
112
Ocena
4,75
P
PrintablesSilverBullet126

Axial SCX6 - Axle Stands

Axial SCX6 axle stands; separated by front and rear (since they're different). My goal was to have the strength to hold up a ~28 lbs truck, but use as little filament as possible. You'll need to complete, two rear verticals (they're…

Pobrania
577
Polubienia
34
Ocena
4,57
P
Printablesthall72
Pobrania
577
Polubienia
32
Ocena
4,5
P
Printablesthall72

Lego Compatible (6587.dat) Technic Axle 3 with Stud

This model is compatible with the lego system.

Pobrania
567
Polubienia
59
Ocena
0
P
Printablesthall72

Lego Compatible (32474.dat) Technic Ball Joint with Axlehole Blind

This model is compatible with the lego system.

Pobrania
552
Polubienia
43
Ocena
5
P
Printablesthall72

Lego Compatible (32039.dat) Technic Connector (Axle/Bush) Type 1

This model is compatible with the lego system.

Pobrania
551
Polubienia
44
Ocena
0
P
Printablesthall72
Pobrania
549
Polubienia
48
Ocena
0
P
Printablesshane

Cramer RC Truggy - upgraded axle / driveshaft / CV joints

I have had trouble with the original dogbones and joints binding on the Cramer RC Truggy when the suspension was extended and during sharp turns, resulting in cogging and snapped wheel joints / dogbones. This is a remix of the excellent…

Pobrania
539
Polubienia
86
Ocena
5
P
Printablesthall72

Lego Compatible (15462.dat) Technic Axle 5 with Stop

This model is compatible with the lego system.

Pobrania
529
Polubienia
40
Ocena
4,5
P
PrintablesHL

Threaded Axle for Cat Toy - Treat Dispenser Puzzle -

The original model is entirely glued together, this fulfills a request to make one end of the axle threaded so it can be easily disassembled to refill or replace the pod. Use all other parts (including one axle cap still glued) from the…

Pobrania
518
Polubienia
98
Ocena
5
P
Printablesmattkollar

32039-Technic Axle Connector with Axle Hole

32039-Technic Axle Connector with Axle Hole

Pobrania
516
Polubienia
17
Ocena
0
P
Printablesthall72
Pobrania
510
Polubienia
55
Ocena
4,5
P
Printableselevensies

(un)original Prusa Drybox Auto Rewinder Axle Remix

Don't use a brim. It will prevent the axle from fitting easily through the bearing in the auto-rewinder. There is not a ton holding the print to the bed but I haven't had any problems with the part popping off during printing on the Prusa…

Pobrania
482
Polubienia
80
Ocena
4,89
P
PrintablesChris

SCX24 - Axle Skid Plate

To help protect your SCX24 Axle housings while out Crawling around your backyard or your neighborhood. The mount will fit Stock SCX24 Axle diff covers, and will also fit Injora diff covers on Stock Axles. Mounting holes on both ends of…

Pobrania
469
Polubienia
99
Ocena
5
P
Printablesteybean

Removable Axle for Cat Treat Dispenser Puzzle

Print Settings: Material: PLA Layer Height: 0.15 Wall loops: 3 Outer wall: 60 mm/s Infill: 25 % Print all parts vertically (as modeled) No support required Brim recommended for the axel

Pobrania
465
Polubienia
72
Ocena
4,78
P
Printablesthall72

Lego Compatible (50451.dat) Technic Axle 16

This model is compatible with the lego system.

Pobrania
456
Polubienia
30
Ocena
0
P
Printablesthall72

Lego Compatible (57585.dat) Technic Bush with Three Axles

This model is compatible with the lego system.

Pobrania
442
Polubienia
47
Ocena
3
P
PrintablesAlvomane

Lego Technic Axles Compatible Shock Absorber | Lego Technic Achsen kompatibler Stossdämpfer

This shock absorber is compatible to the common Lego axles. The sliding piece is put on the axle together with the pressure springs and blocked at the top. There are two versions, each with a hole at the top and an axle cross at the…

Pobrania
436
Polubienia
104
Ocena
5
P
Printablesthall72
Pobrania
417
Polubienia
63
Ocena
0
P
Printablesthall72
Pobrania
415
Polubienia
29
Ocena
0

The Best Snap Fit Wheel and Axle

I love making toy cars, and all cars need wheels. This is the best snap fit wheel and axle combination I have found after many attempts and months of testing. I use this on all of my models that are at the appropriate scale. This design…

Pobrania
414
Polubienia
19
Ocena
5
P
Printablesthall72

Lego Compatible (53585.dat) Technic Ball Joint with Axlehole Open

This model is compatible with the lego system.

Pobrania
409
Polubienia
38
Ocena
0
P
Printablesthall72
Pobrania
407
Polubienia
32
Ocena
5
P
PrintablesMaesgd

Road/gravel bike transport assistant _ Front wheel place holder (100mm and 110mm through axle)

Bracket for road- or gravel bike to safe space during bike transport. Printable without support if layed on the side. I recomend to drill out the 12mm hole after printing due to schrinkage. I printed it with 5% infill and just 2…

Pobrania
407
Polubienia
163
Ocena
3,5
P
PrintablesSren232

KTM 690 SMC R Achsschutz vorne / KTM 690 SMC R Axlesliders front

Montagehinweis Gude, zur Monatge wird nur eine M10 Gewindestange und etwas Kleber benötigt. Zu erst die Gewindestange etwa auf Maß 290mm absägen, die Achsschraube mit einer 27er Nuss lösen und in die Mitte der Achsmutter eine Bohrung mit…

Pobrania
406
Polubienia
32
Ocena
0
P
Printablesonerian

lego 4032 Round 2x2 with axle hole

lego pice 4032 or rounded 2x2 plate with axle hole.

Pobrania
406
Polubienia
15
Ocena
5
P
Printablesbglasford1

VW Engine - Transaxle

This is the transaxle required for the VW Engine model. The transaxle includes the transmission and axle differential. Updates: 9/14/2026: Updated Instructions - Throwout bearing assembly uses 4-6700zz bearings, not 6701zz.

Pobrania
402
Polubienia
58
Ocena
5
P
Printablesmattkollar

32184-Technic Axle and Pin Connector Perpendicular 3L with Center Pin Hole

LEGO Compatible 32184-Technic Axle and Pin Connector Perpendicular 3L with Center Pin Hole

Pobrania
401
Polubienia
15
Ocena
4,33
P
Printableshumming

SCX24 Front and Rear Axle Limiting Strap Mounts

Simple limiting strap mounts for the front and rear axles on the SCX24. Front axle is for axles upgraded to an ES08MA II steering servo with one of the typical kits. I printed in PETG for the toughness. ABS would also be an excellent…

Pobrania
397
Polubienia
36
Ocena
5
P
PrintablesJoe Fincher

Lego Technic Axle and Pin Connector 6332570

This is a recreation of Lego Technic part 6332570 (axle and pin connector). I printed on my Prusa i3 MK3S at .10 detail. After printing, I would recommend either the .07 or .05 ultradetail. The part works perfectly but it is not totally…

Pobrania
395
Polubienia
34
Ocena
0
P
Printablesthall72

Lego Compatible (32494.dat) Technic Wheel Spindle Axle Driver

This model is compatible with the lego system.

Pobrania
387
Polubienia
39
Ocena
2
P
Printablesaqf23

15x110mm Bike BOOST thru axle universal fork mount w/ .STEP (NEW V5)

It has been designed for a 15mm axle and 110mm space. Designed for 21mm drop outs, so it should be compatible with all the BOOST forks. UPDATE : The V5 version is 5mm taller as requested on a comment from Thingiverse. IMPORTANT: in this…

Pobrania
386
Polubienia
58
Ocena
5
P
PrintablesFlyBy Tom

Bike Thru-Axle Clamp Mount

Needed a way to mount bikes with thru-axles in the back of my van. Decided on this clamping design as its easier to load and unload bikes rather than solid thru axle mounts that I used in the past. This was designed to work with 12x100mm,…

Pobrania
379
Polubienia
139
Ocena
5
P
PrintablesClough42

Ball Bearing Axle Shaft for PolyDryer

This is a ball-bearing axle that fits in the Polymaker PolyDryer dry box to reduce the friction when feeding TPU and other sensitive filaments. I found that the cardboard spool on my Siraya Tech 85A TPU tended to hang up on both the…

Pobrania
378
Polubienia
104
Ocena
4,86
P
Printablesthall72

Lego Compatible (32506.dat) Technic Bionicle Claw with Axle

This model is compatible with the lego system.

Pobrania
369
Polubienia
51
Ocena
0
P
Printablesthall72

Lego Compatible (32209.dat) Technic Axle 5.5 with Stop

This model is compatible with the lego system.

Pobrania
355
Polubienia
25
Ocena
0
P
PrintablesBrogan Pratt

Lego Compatible DC TT Hobby Motor Mount & Axle Adapter

Remix of standard servo mount to allow lego compatible pieces to fit on standard yellow DC TT hobby motor with gearbox. Good for hobbiest robotics projects. I use it in my High School robotics class to connect the microbit/raspberri pi to…

Pobrania
354
Polubienia
19
Ocena
0
P
Printablesklox82

Fanatec CSL DD axle cover

fanatec csl dd base shaft cover used with metallic QR serves to cover the shaft and eliminate bending motion

Pobrania
354
Polubienia
34
Ocena
5
P
PrintablesDiplomator

Spool - Rewinder Axle with Bearings

UPDATE: lots of Users hate me for that very Bad design, i am so SORRY for my really Bad design. -i am a beginner in CAD and really a NOOB, sorry for that →hopefully there are some Professionals who can make a better design out of my bad…

Pobrania
354
Polubienia
49
Ocena
0
P
PrintablesJasonCharlton

Baddeley MKIII Drive Axle Mod

Regardless of what material you use to print your R2D2, the axle that runs through the drive wheel on the MKIII drives should be replaced with a steel rod for maximum strength and durability. Although threaded rods could be used in this…

Pobrania
350
Polubienia
15
Ocena
0
P
PrintablesBG5UTE

Pastamatic axle holder

有效防止使用双电机MOD时,卷线时的跳轴的现象 机翻:Effectively prevent gear runout during operation when used the dual motor mod Hardware: 1X 608ZZbearing 1X M5X35Scerw and nut 2x M6X50Scerw

Pobrania
349
Polubienia
42
Ocena
5
P
PrintablesBeek

TRX4 Servo on Axle SoA

Hier ein Servo on Axle Mount für den TRX4 mit 4link umbau

Pobrania
346
Polubienia
21
Ocena
3
P
PrintablesWoodenspoke

Pastamatic Axle Brake- no TPU no Blocks- To transfer filament from one roll to another.

I really did not want to print the TPU just because I am an ABS person all the way. I found clips to hold down the spool axles on the Pastamatic but no one used them to slow down the filament spools as a brake. I tried rubber pads on the…

Pobrania
340
Polubienia
21
Ocena
4,75
P
PrintablesJAV3D

CleanGrip Pro - Carbon and Z-Axle Rod Cleaner

english Instructions for 3D Printing a Tool for the Maintenance and Cleaning of the Carbon Axles and Z-Lead Screws of the Bambulab X/P Series These instructions describe the steps for using a special 3D-printed tool designed for cleaning…

Pobrania
339
Polubienia
35
Ocena
4,5
P
PrintablesMatej Albert

LEGO axle

May be compatible with lego technic

Pobrania
338
Polubienia
43
Ocena
1
P
Printablesthall72

Lego Compatible (44294.dat) Technic Axle 7

This model is compatible with the lego system.

Pobrania
336
Polubienia
17
Ocena
0
P
Printables3D-Muc

Antenna model with parabolic dish and movable axles

This antenna is modeled on a real antenna that is located in the Antarctic. The special feature are the axes of the antenna which function via two hemispheres (bent axis). This design is unique in the world and this antenna only exists…

Pobrania
335
Polubienia
9
Ocena
5
P
Printablesthall72

Lego Compatible (6553.dat) Technic Connector (Axle) with Axle 1.5

This model is compatible with the lego system.

Pobrania
333
Polubienia
30
Ocena
0
P
Printablesthall72

Lego Compatible (55982.dat) Wheel Rim 14 x 18 with Axlehole

This model is compatible with the lego system.

Pobrania
332
Polubienia
22
Ocena
0