6354 modeli
Here's how you have to set in Prusaslicer to test the temperatures. https://www.youtube.com/watch?v=uVaJpcBTCgQ&t=4s The tower is divided into distinct blocks or levels, each marked with the corresponding temperature. Allows observation…
Wydruk około 1,43 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
[Update: Added another variant for "Wilton Gel Food Coloring Containers". There are now trays with these diameters: 25.5 mm (e.g. Army Painter, both standard and elevated variants), 33.5 mm (e.g. Citadel, standard variant) and 29.0 mm…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Here is my own interpretation of the razorback form The Expanse. The model is design at 1:30 and mesure around 67 centimeter height but designed to be undersized until 34 % size without issues (1:90 scale - 23 cm height). It can be…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
I designed this model to squeeze a bit more performance out of the Thermalright AXP90-x47 CPU cooler in the FormD T1 v2 case. The duct prevents re-circulation and ingestion of hot air into the cooler and can provide some passive cooling…
Wydruk około 1,17 €–1,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is for expand the egg storage capacity in the fridge
Wydruk około 8,45 €–10,33 € nettoWstępna wycena jednego wariantu
Update: 5 Jun 19. I had a problem with occasional jams during loading with blunt tips hitting the blade. I've modified the selector and blade cover a bit further to prevent this from happening. I've also made the blade "sockets" much…
Wydruk około 3,17 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A holder for an X6Play smartwatch from Xplora. Printed with Organic support. Have fun!
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
What the video below to see it in action! Use a pen to hold the 2 balls/marbles/bearings for a clean start and watch the bumpy road win! Ball size/weight/starting position/layer height all affect results. I used ball bearing and practived…
Wydruk około 5,56 €–6,79 € nettoWstępna wycena jednego wariantu
As I've collected more records I've struggled with them leaning against each other while they are stored in my Ikea Expedit. This is a simple divider which splits a cube into four even sections. It's easily attached to the underside of…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
I did another experiment with TPU/PLA Multi-Material printing. I changed the interface section in a way that over a configurable number of layers the 2 materials get kind of "woven" (per layer) to each other (see pic of interface…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
Print single color or with one filament change. One size fits all. No Supports. Grippy handle and easy on/off. Try it! Color change at 9.4mm (Optional) Want MORE? Visit the CHIP CLIP COLLECTION
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
Origin This a remix of Carson Miller's excellent organizer set for the Wingspan board game. In short, it holds all cards, dice, player cubes, round goals, eggs, & food from the original game and European, Oceania, and Asia expansions. It…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena jednego wariantu
My wife asked for something that allows her to block her 9315 XPS Webcam, and this was the result. It fits the laptop neatly, not too tightly, blocking the entire array of sensors at the top without interfering with the screen. I…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
This modular insert allows you to store all the pieces of the tabletop game catan including the expansion Cities & Knights and the expansion to up to 6 players for the base game and the expansion. All parts can be printed as is, without…
Wydruk około 7,37 €–9,01 € nettoWstępna wycena jednego wariantu
This gcode will help find the correct z offset for a 3D printer's nozzle. It is a back and forth square (hence “oxplow”) that begins at -0.1 mm below the current nozzle offset and raises it each row until it ends at +0.1 mm above the…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Fits base game with first expansion. There is slot for 3D Printed figurines.
Wydruk około 2,50 €–3,05 € nettoWstępna wycena jednego wariantu
There are a few cup holder expanders for vehicles out there, but I wanted to include some details from several of the versions I saw online. This one includes smoother edges all around, and the onside will fit a can, such as a 12oz Coke…
Wydruk około 9,23 €–11,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Creation of a 3D printed learning tool for an experiment with surface tension
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
This minimalistic bar end expands from 18mm up to 21mm, locking your bar tape in place and giving your bike a nice detail depending on the chosen color. The bar end will of course also fit mountainbikes and other handlebars. The mechanism…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
This model is very similar to the original one, except I added two “ears” and two pegs to be able to mount it to the frame of my whiteboard (see pictures). Kudos to @lendres for the original model anf for providing the Fusion360 files so…
Wydruk około 7,91 €–9,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a storage solution for the Nemesis basegame, the aftermath expannsion and the medic character. Everything fits in the core box premium sleeved with no lid lifting. If the “untold stories” book is included there is a small lid…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Accessories for the VW T3 camper model. (Universal trailer model for future projects) used screws: M3x20mm (12x) red M3x6mm (3x) blue Keep the orientation of the parts as original STL file. Printer setup: Nozzle diameter 0,4 10% infill…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Here's a remix of the waving octopus model with an exposed brain. Change the filament after the layer at 45mm to have a different colour for the brain as pictured.
Wydruk około 3,71 €–4,54 € nettoWstępna wycena jednego wariantu
This is a clip that attaches to an XP Pen Artist 13.3 Pro and allows you to clip your pen to the tablet! I created this after seeing that the newer Artist 22 Pro comes with a really handy pen clip and wished I had one. It just simply…
Wydruk około 0,90 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Death Star Egg Cup - Testing out Meshy web site for generating 3d models for use with Blender displacement. Evaluation: LumaAI is better. Meshy offers more refinement and prompt options than LumaAI. But its going to cost you after your…
Wydruk około 4,06 €–4,97 € nettoWstępna wycena jednego wariantu
"Just One" is a fun party game, which can be played without the need to sit too close together or even via videocall (ideal covid party game) - so when the expansion "Neue Begriffe" with new words came out, we got it. This insert lets you…
Wydruk około 6,43 €–7,86 € nettoWstępna wycena jednego wariantu
Raspberry Pi5 case with the cpu cooler fully exposed
Wydruk około 2,03 €–2,48 € nettoWstępna wycena jednego wariantu
The insert can fit all the different game pieces from the base game as well as both of the expansions into the base game box. The insert have enough space to hold 5 of your most favorite characters and there is a small separate “box” for…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
NOTE : I found it necessary to reinforce part of this design. I recommend using the improved version below instead of this one: https://www.printables.com/model/75269-die-holder-lathe-tailstock-improved This print is labeled experimental…
Wydruk około 2,07 €–2,53 € nettoWstępna wycena jednego wariantu
This is a holder/organizer for Copic “Classic” Markers. It features slots in the side for later expansion, allowing you to connect multiple holders together with the “Expansion Connecter” piece (I will probably make addition desk…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
I really wanted to use linear bearings for the X axis on the Sainsmart 3018 Pro CNC I had, but I didn't want to have to swap out the rest of the X axis as well. I made this to work with a 350mm MGN12 linear rail and MGN12H block. You can…
Wydruk około 7,68 €–9,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My OPiZ2 runs OctoPi for my printer, it sits in a drawer next to the printer which not the best location without a case. I couldn't print the hexagonal vent holes in the side walls properly and needed to add my expander board. I used PETG…
Wydruk około 3,07 €–3,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I recommend to use the *.3mf File to get a very lightweight knive (~10 g including blade). This is a quick and dirty remix done using the STLs and the cut tool of prusa slicer. Two of the pictures show the model with less exposed blade…
Wydruk około 0,47 €–0,57 € nettoWstępna wycena jednego wariantu
My kids kept destroying the cards when we play Exploding Kittens so I picked up sleeve protectors to help them last longer. On the plus side the cards are in great shape. On the other side, they no longer fit in the tray that comes with…
Wydruk około 4,36 €–5,32 € nettoWstępna wycena jednego wariantu
Die Lokomotive besteht aus mehreren einfach zu druckenden Einzelteilen und lässt sich mit handelsüblichem Kleber unkompliziert zusammensetzen. 🧩 Merkmale & Aufbau Modularer Aufbau : Lok, Waggons, Räder, Deko-Elemente (Stern, Tanne,…
Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu
This is a bit of a do-it-yourself project to print a hummingbird silhouette with interesting infill. The basic idea is to print the interior with no top or bottom layers to expose the infill. When you first import the STL, it will look…
Wydruk około 3,21 €–3,92 € nettoWstępna wycena jednego wariantu
This design is an experiment both in CAD and in printing the CAD design (see below for more information on the special printing configuration). I plan to use this design (or possibly a variation of it) on a future print I am planning, but…
Wydruk około 0,65 €–0,80 € nettoWstępna wycena jednego wariantu
This is a fan duct to go in between the side panel of the Dan A4 H2O and the Thermalright AXP-90 X47 Copper Cooler. Without this, the hot air of the CPU and PSU recirculate in the CPU cooler. This made my 5800X3D drops by 7c since it can…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Fogger nozzle expander
Wydruk około 1,99 €–2,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just add water. Notes: Print in PLA – although the ideal material would be Nylon The top reservoir is for reagent, and should stop flowing when it reaches the main branch, unless there is liquid in the main branch Use a paper towel as a…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena jednego wariantu
Allows you to look around like a DJI and simply enjoy the view. Best addition to this drone I've made by far. It's a rear mounted camera with servo tilt control. Fits the OEM Cat and other similar size cameras. Requires a 9g servo and…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
Este modelo representa a un tierno Pulpo Dumbo , una especie real de aguas profundas conocida por sus aletas que recuerdan a las orejas de un elefante. El diseño fue creado en colaboración con Tripo3D AI , cuidando cada detalle para…
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
External dimensions 82.000, 11.000, 165.000 mm
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Check video on youtube: I printed the diffuser in vase mode, since I could not print it without breaking, I made a little edge for strength. (which does not bother me much) Then assembled and loaded the ESP-01 with programmer (or loosely…
Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu
I remixed based on feedback to make mouthpiece touch the bedplate and make the airflow less restrictive. I have not printed but it seems to slice correctly. I haven't printed myself but there is one make! Thanks and enjoy! I recommend…
Wydruk około 5,65 €–6,90 € nettoWstępna wycena jednego wariantu
When it stops printing, just put there some window mesh, adjust it with magnets and continue printing.
Wydruk około 1,15 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Helpful Tool to Store Stained Glass or for Light Edge Dying or Drying Leather Edges after Dying, Painting, Gluing or Prepping Work Use with specially designed Holder for Leather Edge Dyeing & Drying Rack - Expandable Display 14 Slots from…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
Hello everyone, This is a simple model of neck-mounted ABUS Granit 540 U-lock holder for Ninebot Max G30 e-scooter. Hardware required: 6x M5x12 mm bolts 6x M5 nuts Double up to eliminate lock rattle/movement (see photos). Recommended…
Wydruk około 5,36 €–6,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A fridge magnet or plaque with an amusing text which says "I'M NOT ARGUING I'M JUST EXPLAINING WHY I'M RIGHT" I've included the colour change .bgcode made with PrusaSlicer
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
I decided printed and laminated signs weren't good enough, so I improved Provided gcode files include colour change at the appropriate layer for the text elements v2.0 corrected spelling and reduced thickness of background plate
Wydruk około 1,96 €–2,39 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My spin on a larger reversed Einsy case that's truer to the original Prusa MK3 Einsy Base design. I did get a lot of inspiration from Martin Au's Embiggend case, in fact I was using it up until recently. I also have a drop-in t-nut model…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introduction Dell XPS 9700 tends to get hot when gaming, wanted some easy to carry feet to improve air circulation when needed. This part elevates the back of the laptop by ~20° I am proud of this simple piece and would appreciate your…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
My Sovol came with almost the same exact tool kit as the Ender this holder was designed for. It also came with tweezers, a spatula, two nozzle cleanout wires of differing diameter, an additional open end wrench, and a 90 deg 6mm wrench. I…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena jednego wariantu
Replacemet dowel , not quit as good as the original from blum but better than no dowel or the usuall “so i have to get a bigger screw”. Note: use Pin_V2 the V1 was not as strong as I thought. Ersatz Spreizdübel, nicht so gut wie das…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Space Port Exploded Bookends Because even people in the future megalopolises need their books kept upright. So do your part citizen! Print these out today! Do your part! Stay in the fight! Fear not the mutant, alien, and worse. Suffer not…
Wydruk około 19,49 €–23,82 € nettoWstępna wycena jednego wariantu
This cool pencil holder can be printed in any material! in the premade G-Code there is color change included like it can be seen in the pictures, and don't worry, you don't need any MMU to do the color change, simply switch the filament…
Wydruk około 5,97 €–7,29 € nettoWstępna wycena jednego wariantu
EXPO Fine-tip dry-erase whiteboard marker holder originally designed by jsmith14 from Thingiverse. Fits 8 markers and can hold them securely in a horizontal position (since markers have the indication to store them that way on the…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
Ford Focus MK4 Quadlock adhesive mount adapter for Aliexpress phone mount Quadlock dashboard/console mount doesnt stick on the dashboard material and couldnt find a good location. So i combined it with this dashmount from Aliexpress…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Hello, I have Traction pads for RC car Expedition 1:10, 1:12 RMT T98 Land Rover Defender. They are 220x30mm. I used PLA/PETG Basic as material You need to use supports If you are interested in my work, the links are here:…
Wydruk około 2,98 €–3,64 € nettoWstępna wycena jednego wariantu
Print the pieces with spiral vase mode enabled, as well as sequential mode. In each color, you'll need: 1 sage 1 fool 2 couriers 4 pawns Print the bases with no top, no infill, and 0.6mm of total bottom thickness. Use sequential mode and…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Ho maggiorato a mio piacimento il modello originale secondo l'utilizzo
Wydruk około 13,75 €–16,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Phone holder is open.
Wydruk około 2,67 €–3,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Base support for antenna mast to prevent slipping when guy wires are used. It also has a groove for guiding the antenna wire inside the mast. Filament used is PETG. Used 4 perimeters, 5 solid layers for top and bottom, 15% Gyroid infill.…
Wydruk około 3,94 €–4,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Purpose The game requires several extra pieces that aren't included in a standard chess set, so here they are. These designs are based on Corinthian helmets and dory spears. Manufacture Print the pieces with spiral vase mode enabled, as…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Update: Success! Feel free to continue below for perspective on this project, but there is now a working model on Printables here . I was attempting to design a simple flashlight using conductive filament with the goal of being entirely…
Wydruk około 4,45 €–5,44 € nettoWstępna wycena jednego wariantu
1.n Expandable sockets or switches with the option to use Shelly mini to switch sockets. Extension with Wago terminals Please note that the wiring must be carried out by an electrician
Wydruk około 0,75 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PLA was used to print all the parts at 15% infill. PLA USED: Polymaker Marble White CC3D Gold 3DPrintingCanada Standard PLA: Red, Green, Black, Blue, Gray, Orange, Brown The Resources you see are listed below. I adjusted the sizes to the…
Wydruk około 0,11 €–0,13 € nettoWstępna wycena jednego wariantu
100x160mm sign, with text reading “Expose Yourself to Art” and image of a person opening their trench coat to a framed painting on a wall. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena jednego wariantu
The Psion MC series has two expansion slots at the back, mine came with two expansion ports, other owners have no expansion ports or covers. This design contains a “Full Expansion” model which fills the entire slot, and an “Empty…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
The Field Expedient Phone Stand provides a rugged and simple way to prop up your phone. Use sticks, spare ammo, or whatever you may find in your environment to stick through the holes and brace the FEPS. The holes nicely accept 5.45, 5.56…
Wydruk około 1,37 €–1,67 € nettoWstępna wycena jednego wariantu
To asemble this get 2 shoes and glue stick shoes whatever your want position
Wydruk około 13,35 €–16,32 € nettoWstępna wycena jednego wariantu
I would love to share with all of you my holder/dock for Apple's M4 Mini with integrated OWC Express 1M2 holder enclosure. With added notch for the power button Print Setting's : I Recommend PETG or any stronger more heat resistant…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has…
The Modular Attached Storage Stack ( link ) is a compact 3D printed NAS enclosure with expandable bays support up to 8x 3.5" + 3x 2.5" drives. 👉For the premium version of MASS with additional features, please see MASS Premium Page here .…
Gridfinity addicts, rejoice! Now you can bring your favorite organization system to the messiest place in your home: the Kitchen! In the collection, you will find various different models for various different sized utensils. The models…
Made a pick for myself, and decided to share it to the world. I really like the honeycomb pattern so that's kinda the main theme of the project. I included a blank .stl file where you can add a name for your self or anything your heart…
"Slightly" overengineered flexible steel sheet holder for MK and MINI printers to be screwed to a shelf. It's also extendable to as many as you want. Variants for other steel sheets: Prusa XL Bambu Lab A1 Support my work For non-Prusa…
This expandable fidget skull features a segmented, articulated design that allows it to smoothly expand and contract in your hands. Inspired by a classic skull shape, it combines a bold visual style with a relaxing kinetic motion, making…
Another photo studio! There are quite a few of these online, however most are tailored to smaller backgrounds, normally A3 paper sized. When I photograph my props or larger items, I quickly find the limitations. Available now is a…
Ones assembled, the Death Star is locked and can only be disassembled with a trick: Spin it really fast! Size: 45mm - DO NOT scale - won't work well. Comment if you want another size or if it's too tight / loose :) Print takes about 3h,…
These models and experiment sets are featured in this YouTube video: You will need the latest version of OrcaSlicer. As of 11/15/2025, you will have to do this: 1. Go here: https://www.orcaslicer.com/download/ 2. Download the nightly…
This insert was designed to hold all available Spirit Island content with quality sleeved cards in the Base Game and Jagged Earth box. The insert is optimized for multi-person play, as trays such as energy, elements and other tokens are…
CLICKbase , like the Clickfinity design it evolved from, is a latching Gridfinity baseplate that holds all Gridfinity compatible bins securely without using any magnets. The most significant difference with Clickfinity (and it's other…
Trying to stay organized as you explore and conquer Catan? Unsatisfied with the wasted space on the factory inserts and having to store everything in multiple boxes? Try these inserts designed to make setup, play, and storage a little…
This test piece allows you to estimate the shrinkage of the material. The piece is designed for resin printers, however, it can be also used for FDM printers to estimate shrinkage and You should print the test piece with regular settings…
This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features: - Retractable PDCs - Openable Torpedo tubes with…
This expandable fidget slime smiley features a playful slime-inspired shape with a cute smiling face. Its segmented, articulated structure allows the model to smoothly expand and contract, creating a fun, squishy-like kinetic motion…
***I made an updated version that should fix the slicing issues. I added the model here, but for the full page and description, check out the fixels 2. no supports required at all, much easier to print*** This is my current version of 3d…
Print with PLA, Spring with PETG, all without support, different colors. Use 2cm filament and fix it in the Bow, curve it to be parallel and use it as a pin to hold the cover on the surprise box (Suggest to oil part of the filament on the…
Hi! This collection of Root 3D buildings and tokens was put together by myself in order to have a nice print-at-home alternative to the popular MeepleSource Root pieces . Almost very single piece in this collection is set to be able to be…
3D Printed race track RC car 1/10 scale 3D printed body available HERE Step files of all the 3d printed parts are now available Stay tuned for exciting new projects on our Facebook group The 3 main guide listed above contain all the…
check out the other versions it's bigger it's more stable and it's expandable here the latest version of the bottle dryer in different versions this version is taller and wider than previous versions i added a dovetail connector system so…
This is my take on the Morrigan Class Patrol Destroyer from the MCRN. It is done to scale to my Rocinante model. The model is once again kit so no glue needed. It has two features: Retractable PDCs - the same as on the Roci. Retractable…
Build your own little ghost crowd! This collection includes nine draped-sheet ghosts, each with a different expression, from a cheerful smile and heart-shaped eyes to an angry glare and a dramatic scream. Display them on a shelf, decorate…
REVISION HISTORY 2023-08-20: Updated the grid generator (v1.02) for additional options for generating plates and added ore block (B(1 - ore.stl) . 2023-08-19: Updated the grid generator (v1.01) and plates to add 0.2 allowance in between…
This is my MCRN Donnager class model from the show the Expanse. Model is some 35cm long and comes with a stand. It is a kit so it does not require a single drop of glue to put together. I highly recommend to use the following video in…
Back Story Of This Design: I wanted to push my skills with 3D modelling and put my green thumb to use so I decided this would be a great place to start on expanding my skills at making nicer looking models in CAD. This planter is designed…
Intended to be used in the Formd T1 case in 3 slot configuration with the air cooling holy trinity: Thermalright AXP-x47 Full Copper Noctua NF-A9x14 Noctua NA-FD1 The pegs are designed to be friction fit and clear the fan retainer clips.…
This is an insert / organizer for Star Wars Outer Rim with the Unfinished Business expansion. It supports premium sleeves on the cards (Paladin Gawain sleeves shown in the images), supports vertical storage, has no lid lift, and was…
This expandable fidget Death Star is inspired by the iconic space station design and features a segmented, articulated structure that allows it to smoothly expand and contract. The spherical shape combined with detailed surface panels…
![NAS ITX PC Case with stackable expansions [MODCASE MASS]](https://media.printables.com/media/prints/590711/images/5398476_0c00c6d9-fdbe-4607-87dd-43629c8d4a8e_5e31701b-0df6-4979-ab25-d1b7d3dc16b8/212.jpg)
