1946 modeli
Buy a printed fidget cube from me directly: AustinMakes.etsy.com An addictive fidget toy that you won't be able to set down! Prints in one piece and works right off the print bed. Note: vertical hinges will be stiffest after printing, but…
This is (hopefully, don't actually know) a strong version of Yet Another Fidget Infinity Cube V2. I noticed that whenever it broke it was almost always on the part of a hinge that goes in side one of the cubes. To fix this, I just made it…
Update April 24, 2019 Parts sized to fit 250mm x 210mm x 210mm https://youtu.be/aASsWYpQr8c Does the world need another Keyblade? This Keyblade is designed to be an easy-to-build kit with parts that screw fit together. No support material…
I got annoyed by not being able to either print of fit the 90º heat bed covers for MK3. So I took inspiration from the last model that I've tried and built my own version from scratch based on the original Prusa source files.
UPD v23: Fixed wall thinkness issue on top cover UPD v25: Fixed fillet fails to calculate for small “holes"; Fixed top/bot X axis pattern for large boxes (>50mm width) UPD v26: Fixed side wall holes number and offset calculation, now…
Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…
Based on ISO/IEC 7810 - ID-1 for perfect fit in your credit card wallet. Thickness 4mm.
It would be nice if you post your make. Thank you
Heavily inspired by all the different rotation indicators flying around. Very thin and lean version. I primarily did this to have something fitting to the magnets that are flying around in the office and to test the variants feature of my…
This is a remix of https://www.thingiverse.com/thing:2064269 thanks to https://www.thingiverse.com/thegoofy/designs for the original design. I added 90mm to the base and sliding jaw screws to accommodate clamping larger items. The other…
Buy a printed cube from me directly: AustinMakes.etsy.com This variant of my Yet Another Fidget Infinity Cube v2 model is the easiest yet to print. Assembles using M3 flat head screws. (If there's demand for it, I can upload a version for…
Push-in foot for Yeti Tundra 65 Cooler covering the existing rubber feet allowing the cooler to slide on hard surfaces, like the back of a pickup truck. I have a Tundra 65 so I don't know if this will fit on other size Tundra coolers. If…
Finally decided that the LCR-T4 meter rolling around on my desk needed a case. Wanted a "toolless" case, so here it is. I used this switch from jaycar: ultra-mini-rocker-switch . Model is based on this case by Phenomen however this is a…
Large water bottle holder for clicgear (v3 to 4.5) golf push cart inspired by the v4.5 clicgear water bottle holder. This was designed for a 9cm diameter by 25cm tall water bottle ( YETI 18oz Rambler & Thermoflask ). Printing Tips…
Yet Another Wire Distribution Tool heavily inspired by: https://www.printables.com/model/481587-umikot-58mm-version-planetary-gear-spirograph-espr and https://www.printables.com/model/620399-spirographic-wdt-tool Additional Parts: 4x…
Printed with filaments from Prusament ColorMix bundle: Prusament PLA ColorMix Cyan Prusament PLA ColorMix Magenta Prusament PLA ColorMix Yellow Prusament PLA ColorMix Gold Glitter The darker version uses these: Prusament PLA Azure Blue…
Yeti Camino Hook Extension Fits all sizes of the Yeti Camino Tote Bag. Now your hook will reach a bit further so you can jam more stuff into your bag. This hook extension is tough enough for your Yeti. Features Locks in place onto the…
Yet another approach to save space for spices. The structure is strong enough to hold about 10 “regular” spice cans. STL 0.2mm Speed mode had good printing results and. NO SUPPORT is required - see the attached Section Analysis image.…
I created this try to help me stay organized and balance finding, putting away and space efficiency. Large, readable size labels allow wrenches to be stored on edge, you can tell at a glance when a wrench is missing. Generous finger slot…
Ein weiterer Y-Adapter für das 4mm PTFE Rohr, mit Innengewinden. Einfach zu drucken. 0,2 mm Schichtdicke. Achte auf die richtige Ausrichtung und die erste Schicht im Kanal, sodas die erste Schicht im Kanal in Zugrichtung verläuft dann…
I saw these build dice on Adam Savage's Youtube Channel and wanted some. I can't afford the premium metal ones, so here are some made of plastic!
This luggage tag holder is not a remix of the original design found here: https://www.printables.com/model/607597-luggage-tag/files While the idea is inspired by that model, this is a completely new design created from scratch. I designed…
There's a lot of scrapers on printables.com - but this is my version. As always, there's a balance between higher heat (promoting better layer adhesion) and lower heat (reduced stringing, especially with PETG). For me, scrapers should…
Made to fit snuggly so that it doesn't wobble. I also added some foam tape on the outside for even better fit. Confirmed fits 2015 Camry and 2019 Kia Sorento but should fit most 3.2 inch car cup holder. Probably should use filament with…
I created this tray set for the printables catch-all contest (01/2023). The goal was to get away from the usual box shape and right angles and offer a nice place for your belongings. These trays resemble presenting plates in irregular…
Saw the 16 part fidget cube (https://www.thingiverse.com/thing:3753469) and had printed the Yet Another Infinity Cube V2 multiple times and wanted to print the 16 part. Then I notice it was based off the V1 infinity cube so I used fusion…
I came up with this simple and quick yet strong 3d printed peg which doesnt require any assembly, one has smooth jaws and other one has small teeth. I strongly recommend print with PETG as the spring from PLA doesnt really hold up that…
Why Yet Another Drybox Design? I was looking for a storage solution for my filament, but the popular designs I found weren't right for me in terms of size or didn't meet all of my needs. I finally found some storage containers on Amazon…
About YATT - Yet Another Temp Tower is not too different from other temp towers available. However, it features a bridging test as well as a 55 degree overhangs test. It is also stackable so you can keep your printed temp towers for…
This is YACS. (yet another calibration square) Update 24-04-2019 Added new vertical test piece Update 30-10-2017 Added vertical test piece Update 26-10-2017 Flat corners now stand on the exact square corner. Corners are now named. The…
This is a variation of the Infinity Cube. No assembly required. To be printed with 0.2mm layer height and 20% infill. If the model appear to be too restrained in the joints after printing, and using it does not fixing this, heat your bed…
Inspired by the toothbrush-chaos in most of the shared appartements I know, I wanted to design something that would solve that issue in the most simple and effective way possible while also being space saving and elegant to look at. It is…
My old keyboard left me with a large amount of clicky Cherry MX Blue switches, so inspired by FlexiPals Toy Shop model I designed my own version with a slightly less "artificial" (rather unevenly cut) piece of cheese as a keycap.
This is intended to be a somewhat realistic looking flex octopus. Each tentacle is made up of twelve segments. Bed plate adhesion can be a challenge. A textured plate can really help. I consistently print it in PLA on a textured plate…
This clip has been designed to handle spools with a wider frame. In addition, version B has a double-sided fiber groove, so it can be locked on both sides of the clip. Print instructions I usually print it in 0.15 but 0.2 is also accurate…
I designed these cable clips specifically for OpenBuilds V-Slot rail. Other clips I found on Thingiverse didn't quite fit right. Includes 8mm, 10mm, 20mm and 30mm length clips. They can be used to route cables on any machine that uses…
Yet another knight on foot with a sword. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. There are variants with square and round bases. NOTE The…
Another Garmin bracket, this time with mountain bikes in mind. The clamp can be printed in place, with no supports necessary. The interface itself is in several parts, to improve durability and make it easier to print, again without…
Hallo liebe 3D-Druckfreunde und Centauri Carbon Fans! Bei meinem Elegoo Centauri Carbon wollte ich mehr Platz zwischen Druckkopf und Glasabdeckung bekommen. Die im Internet kursierenden Erhöhungen waren mir ein wenig zu niedrig, kosteten…
I designed this adaptor for the cupholder in my 2018 F150 to hold either my 14oz Yeti Rambler or 32oz Nalgene bottle to keep them from sliding around the truck. Should fit 2015-2020 Ford F150's and also confirmed to fit in the 2021 Ram…
Overview Yet another fingerboard/fingerboard mould collection. I'm not a finger-boarder. I can't even skateboard. This is just an interesting project for me to tackle. That means that, in my ignorance, I've probably not nailed the perfect…
V2: Redesigned in FreeCAD Updated geometry is now cleaner thanks to a complete remodel in FreeCAD. A STEP file now available to allow for a smoother and faster print V1: Designed in Blender. Bambu Labs matte grey PLA was used in this…
A toothpaste holder that holds the tube vertically and allows you to squeeze its content. Between the bottom cap and the central cage, you need to fit two springs to maintain tension. Then, you can glue the bottom cap to hold it in place.…
Print in light gray or silver PLA (e.g. Apple Aluminum Silver; I used FIL-ALFA GRIGIO METALLIC).
These are some Modern-esk hexagonal plant pots. They have the same footprint and the same built-in water tray. There are smallish holes at the bottom of the inside to allow the tray to serve as a reservoir. The mid-sized one was designed…
Yet another hexagonal dice tray. Just wanted something not too big and portable. Template for cutting out self adhesive felt is included. Post-Printing Get yourself some self adhesive felt. Print out the included template and use it to…
Remix of Yet Another Apple Watch Stand with holes on the bottom for rubber bumpers (I used 10mm diameter, 3mm thick adhesive rubber bumpers)
Yet another Filament Clip 1,75mm
This is an open RC car chassis project. Step files are attached. Remix, update, redesign as you like. You need to print the gears with 0,2 mm nozzle and %100 infill. Rest can be printed with 0,4mm nozzle and %80 infill. I printed all…
I made a cup holder for the larger style tumblers that clamps on the edge of a desk. I have seen other cup holders for these larger mugs but, they are permanently attached to the desk via screws. That is not an option for when I am at…
Snapmaker U1 YATC – Yet Another Top Cover The official Snapmaker U1 top cover won’t be available for a while, and most community designs I found rely on custom-cut acrylic windows (accurate, but expensive and annoying to source). So I…
Remixed "MINI-knob" (Prusa Mini) and "LCD-knob" (Prusa MK2 / MK3) by PRUSA RESEARCH https://github.com/prusa3d/Original-Prusa-MINI and https://github.com/prusa3d/Original-Prusa-i3 This knob features a smaller form factor, knurled sides…
My first vase experiment ..... Print instructions print in vasemode
This is exclusively for version 1.0 and is not compatible with Dummy 13 beta.
A multi part fridge magnet in the shape of Thor's Hammer. Many Mjolnir only come in one piece or are uploaded as just an stl. I wanted to enable people to print it in multiple materials and use their own magnet so I used the model of…
A barrel. Yes, it's another barrel on Thingiverse. Suitable for 28mm tabletop games. Created so that it does not need any supports and prints well on a cheap FDM 3d printer like the Ender 3. NOTE other minis are…
WHAT IS IT? This is “Yet Another Modular Storage System.” The drawers have different sizes to meet your needs, and they pivot downward to make it easier to grab things within. The “single” size is perfect for screws, bolts, nuts, SD…
The outer ridge keeps condensation contained and the hexagonal pattern keeps it from splashing around. I printed mine out of matte PLA. I recommend printing outer walls first to maintain dimensional accuracy. The fit between the coasters…
I needed a particular size stackable boxes to organise drawer, so I designed this box. The size is 225 mm wide, 187 mm deep and 141 mm high.
Want a squeezer that is simple, sits flat and doesn't distort the empty end of the tube? Here's your answer. Designed for a toothpaste tube that is approximately 54 mm wide. Scale the part in the X dimension to fit your custom tube. This…
Please comment, rate, and post a make! My wife likes ordering the photo books through Google Photos. I wanted to have a dedicated spot for them under our sofa table. A quick search didn't get me what I was looking for so I designed my…
Here is the simple LCD Cover that you can use to.... cover LCD screen of your MK3 or MK2s. Very usefull when your girfriend/wife keeps complaining about screen brightness. UPDATE Version 2.0 Resized to fit on MK3S and MK3S+ screens…
Introduction This model combines 3 hobbies I have: Photography - allows me to take photos. Hot Peppers - Allows me to take photos of beautiful hot peppers I grow in my garden. 3D modeling and printing - Have the joy to create stuff that…
Yet another one of these - why?! I thought the original was well drawn but there were a few things I wanted to change. 1 - Make the walls a little beefier, 2mm thick 2 - Have the lid lock in place without a rubber band. None of the…
Largely inspired by Customizable Rugged Waterproof Box https://www.thingiverse.com/thing:3338826 I which to have a box that does not require any screw, and for the fun of design . This is to print in PETG or ABS with some high infill…
YET ANOTHER IRONING TEST. I've created in orca slicer an ironing test. Found many online didn't seem to translate fully for the K1 profile and had to manually adjust & check the ironing settings for each square, so I just made my own,…
Hey here is another one of those joycon jig tools. I used cat5e wire removed from its protective coating and pushed into the slots. Print at 0.1mm layers or send it off to a high quality print service. Shapeways is great for little things…
A simple Minecraft-heart-style clicker. Designed for one Cherry MX switch.
Just a small test, how much I can achieve with this design. ;-) Infill: 5% Walls: 6 layers Magnets: 15x5 mm Noise reduction: about -10 dB (from ~68 dB to ~58 dB) in 50 cm distance measured by a mobile with app “Schallmessung”.
Spiral Cones apparently are “the next hot sh1t” in 3D models, everyone needs one, everyone prints one, not everyone models one. Here's my 2cts - mainly because I (as others) have been intrigued by these models and wanted to find out if I…
Any tips or donations are greatly appreciated ❤️ Or support on Patreon: https://www.patreon.com/printedencounter
A monitor stand that made to suit my own needs. I designed it from the ground up but used a few designs as inspiration. It uses shelves of 200x18mm and is 150mm high.
I changed location of my printer and decided that I need another purge bucket. After reviewing of available purge buckets, I stayed on https://www.printables.com/model/291141-bambu-lab-x1-purge-bucket which is the best for my purpose. I…
The warm weather is slowly arriving, Mini Yetis have started retreating to the depths of the freezers and refrigerators, but even so, if we are lucky, we can meet free-roaming specimens. Material: Prusament - Vanilla White Layerheight :…
My wife wanted a way to store the Yeti lids but didn't want any shelf space used by the holder. I designed a U-shaped holder that attaches to the inside of the cabinet door. I attached them using some double-sided tape. Gorilla tape…
6 total heads designed for the Dummy 13 model. Enjoy :)
The design is not my idea - I saw it in an instagram feed somewhere and created the model based on that memory. I have tried to find the similar model on model sharing sites as well as here on printables.com but no luck so far.…
Another MLOK vertical grip. If you like the original Magpul MVG, then you should like this one also. Assembled using two DIN912 M4x35mm screws.
This is a screw on adapter for the Yeti Colster 2.0. It adapts to fit a 16oz can. This ONLY fits the new 1/4 turn thread-on cap design. Edit 2023-02-12: Added an extended version to fit 19oz cans based off of another users suggested…
This is a fan shroud for the AMD/ASRock BC-250 mining card. The idea is to stay close to the bounds of the PCB, while still providing decent cooling. A 140mm fan is used as intake in the rear and a 120mm fan is used as exhaust in the…
This is my modified version of Yet ANOTHER Machine Vise by TheGoofy, which is awesome to begin with. I had problem with flexible sliding jaw plate staying in place with original design, and since Chris shared the Fusion 360 project, it…
I recently lost my Drain plug to my Yeti cooler. So I made a new one! This project includes one plug that you can use with no gasket. There is another plug too this one is to be used with a gasket, and I've also included a gasket to be…
A family member wanted an adapter for their cup holder so that it could hold their 14 oz Yeti Rambler and its hot coffee safe during their morning commute. A lot of the existing designs did not allow for printing without supports or…
I needed mini vice mainly for holding small PCBs while soldering but did not like existing ones for different reasons so as usual for me I designed my version. I made it with interchangeable jaws in mind so you can print them in…
Roblox Blox Fruit - Yeti Fruit 3 models: 1 all in one with chain which I found tricky to print with supports everywhere and difficult to remove, so I added separate models for the chain and fruit with no chain. Supports - yes.
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
Looking for a suitable housing for the nozzles and the adapter, didn't find anything. I found many but not all as I wanted. So I sat down and drew the box according to my needs. The specification for me was to make the case as slim as…
Here is Yet Another Gear Bearing inspired by Emmett Lalish's https://www.thingiverse.com/thing:53451 This adds a hand friendly profile for the ring gear, bevel cuts on the gears to avoid concentrating stress and wear at the points of the…
> be me >typical monday morning >makes coffee and pours in new yeti mug >was a gift, makes me happy >get in car to go to work >new mug kinda fits in the top lip of the cupholder >eh, I'll just hold it >15 minutes later when a jerk cuts me…
This accessibility book holder works by placing your thumb into the ring and clamping with fingers. The wedge geometry helps spread the pages of the book for one-handed reading and enhanced grip-ability. Makes for a great gift for the…
Cup holder that holds Yeti 30oz Tumbler to your SUP (Stand up Paddle Board) using the Bunge straps.
what the title says \_(ツ)_/
This is a design for a cupholder extender to fit large bottles that don't fit in the normal model y cup holders. This one is specifically designed to fit 2021 model Y cupholders, and a 36oz yeti bottle. I designed it to be printed on an…
Remix of the remix of "The Mad Slicer" (shorter) combined with "Spool Holder Lock Nut Clip" by AgeReyno to use the original printer locking nut. The remaining parts (roller and pins) from the remix by @TheMadSlicer_230707 need to be…
I was intrigued by the various exhaust fan mufflers for the Bambu X1, and since I had just acquired Fusion 360, decided to create my own version as a way to get up to speed with F360. I wasn't really expecting to make a quieter version,…
Update 2024-03-09: I've added a new version 4. This version is 2mm shorter, in case V3 touches the buildplate. Objective I wanted a fast print , a direct replacement of the stock duct and of course, better part cooling avoiding to blow on…
Update 4/5/24: Newest version with small changes. Don't print this version! __________________________________________ This is my take on a compact travel box for Splendor. I printed one a while back that was fine, but the lid was huge…
Yet another ukulele wall hanger. Tried to make it reasonably stout since the (very small) weight is bending the hooks in the weakest direction. I tried to snap it by hand but couldn't so should be fine for a soprano/tenor ukulele. Would…
Since I've been printing all of these minis for Gloomhaven, I realized that I needed a good way to store and transport them. There are a bunch of excellent mini storage solutions out there, but I'm picky and wanted one that was slightly…
