382 modeli
This is a replacement detent arm for Ford F-150 trucks built from 2009-2014 that shift gears using a floor shifter / console shifter. The original Ford part is very fragile and can easily break when the gear shift assembly is being…
MikroTik RB5009 mounting bracket, can be installed either way (0 or 180 degrees) 4 x M4 nut and screw (length 40 mm) Recommended to sand with P120 sandpaper and then glue with epoxy glue
Replacement cover for GENIUS NX-7009 mouse. The pins on the original one broke of, so I created this. Fits nicely and holds in place. Printed in PLA without supports.
EN: To identify a manually operated control. To identify the switch position that places the equipment under manual (as opposed to automatic) control. To identify the control that activates manual control. To indicate that the equipment…
Dual Intake This was a project that took over 1 year to complete. I want to recognize Austin Chandler for helping with the R&D as well as Isaac Fischer at Fischer Motor Works for providing advice and filters when I was selling these in…
This model is compatible with the lego system.
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** I tried a few paracord winders to organize my paracord, but none worked as I had…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** *** HEADS UP: this is a good model to do comparison test with Prusa's new…
an easy-to-print ram mount holders for Mikrotik RB5009 for 10inch or 19inch rackmounts.
This model is compatible with the lego system.
Update 07.01.2024: The thickness of the strap has been reduced. Now it bends easily. Created of a flexible material for Citroen C4 (2009, EP6) because I'm tired of buying plastic caps that always break. The landing size of the tank neck…
Feel free to adjust the size however you like. Join my Patreon to support my work and unlock awesome perks: 🛠 Commercial Licenses: Get the rights to sell prints of my models. 🚀 Early Access: Download new designs before they go public. 💎…
Rack mount bracket for the Mikrotik RB5009 which can be used to mount the router to a 10 inch rack with 0.5 height units. M4 screws are needed to mount the brackets to the router. Remixed an existing model and changed the horizontal…
Low poly Blastoise, the powerful Water-type final evolution of Squirtle. A must-have for any Pokédex.
This is a replacement emblem for the front of a Chevrolet Trailblazer. Mine fell off of my 2007 Trailblazer SS. It's designed to have 2 M5 brass threaded head inserts installed on the back, you will need 2 M5 screws and washers, too.…
Use this model if you do not want to see the hole in the rack when you mount single RB5009 router. This model can be printed on a print bed with the dimensions of 220mm x 220mm. Just rotate it on 45 degrees in your slicer before print.
This is a replacement for the sync module that has a usb and aux input for a 2009-2014 f150. Using this part along with this USB cord ( https://amzn.to/2upzINH ) you can replace the original for using an aftermarket stereo. This is also…
I needed a key for a Toyota roof cross bar lock, so I made one. The keycode is 82, as shown in the photo (the number on the lock). This key is for Toyota part number PW301-02009. Category: Automotive
Tapered and Flat Nozzle Attachments for M18 FUEL Dual Battery Backpack Blower ( 3009 ), M18 FUEL Dual Battery Blower ( 2824 ), M18 FUEL Blower ( 3017 ), and the M18 FUEL QUIK-LOK Blower Attachment ( 49-16-2793 ). Also compatible with my…
As I had one knob as a reference it was not so hard to model one. The friend liked it so much that he replaced a second one also to make them even. It was a quick and dirty design, so it requires supports at the bottom (I would consider…
Needed a small home for my XL6009E1 Step-up converter (DC-DC boost) PCB boards. Two parts (case + lid) to print. No support is needed. PCB and lid snap onto the case, no additional tools required. Here is a link to the XL6009E1 boards I…
In addition to the factory screw included in the original piece that is used to secure the metal key to plastic housing, you'll also need: 2 8mm M2 screws 1 M2 nut to be put into slot on front piece.. The second screw is just tension fit.…
Hi ! A small universal snap-on module for the regulator assembly based on the LM2596 Designed not in 'Gangnam style' but in 'prusa I3 MK3' style Cover specialy designed for my 2 projects related to the Prusa I3 MK3…
Badges for all 4 classes of crew member in the 2009 Star Trek film. Based on images of production props from a recent auction. Some images included a ruler so scale should be reasonably accurate. The originals used 3M VHB tape, visible in…
Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…
Requirements M4 x 10 screw * 4 M4 threaded insert * 4 You might need a long and thin screw driver for fastening device onto upper mounting hole.
3D Model of Polish Bottle Wall Holder Dimensions: L- 236,99mm, W -95,60mm, H -71,99mm Support: Required Download: includes STL files for 3D printing, 1 instructions PDF Additive manufacturing model designed for FLEX and part of the…
I dont have to say so mutch about this. It was a request of a friend of mine, and now I can't do anything with the model. So feel free to use it :) Happy 3d printing!
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cable clamp with voron logo, useful when using umbilical mod. Hole for ptfe 4mm, cable hole ~5mm
A Mitsubishi L200 2009 model car that you can print along with the tires. The tires were one of my ideas to add to this model car where it can rotate, and front wheels will be able to swivel that linked to the other side. Use filament,…
This is a dial spacer ring replacement for a vintage Seiko 7009 movement, similar to Seiko part 884 283. This fits between the dial and the main plate and prevents the dial from fouling the day and date wheels. It also helps center the…
This is a model of Mitsubishi L200 2009 pickup truck model that I modeled to be 3d printed. Sorry there are no tires modeled for this particular 3d file, the client ghosted me after its completion, hence I somewhat abandoned this. If I…
This lovely 009 Pacer is an original design by David Malton, with some final touches by me. It can best be printed on a resin printer. I did not test it on a filament printer. Updated with new pin and hole couplings, which are much more…
Let's world build for a second. Say, for example, you bought a specific wireless charger for your phone that can mount to your car. Lets say, hypothetically, it's this one . When it finally arrives, you then realize that the only two…
Gedruckt mit Prusament PETG 0,2er Layer 70% infill
A replacement for the cupholder inserts for 2009-2014 F150s that always seem to go missing. Print in PETG or something heat resistant so they don't melt in the sun. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No…
Print with ABS, ASA, or PETG Cup needs support at the hinge. Lid does not require support if printed with the top on the bed. Nozzle 0.4 Layer thickness 0.2 Infill 20%
I made a replacement part for the central locking of a w201 trunk. Orginal part number (A2017500092) I printed it using my X1 CC with PA6-CF (100% infill) laying flat on the long part. works perfect so far. you may have to scale it…
Can be customized to accommodate any panel connectors. I will be using for a USB-C and an HDMI port in a 2012 F150 with a Sony XAV-AX8500 head unit.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Recently I was in need to mark my WAGO terminal blocks, but I didn't want to buy WAGO's markers because it requires a special printer and can be bought only as a quite large coil. This is not the exact copy of WAGO's WMB marking as the…
This replaces the plain metal plate on one end of the stone holder with a beveled holder that will hold mounted stones much more securely. The EdgePro style stones are mounted. This was tested on my RX-009. Updated January 20, 2024 Added…
Full scale model inspired by the hockey mask strap connector from Friday the 13th 2009. The model may need supports for SLA/FDM 3D printing! Dimensions: X 2.25144 inches Y 1.62577 inches Z 0.195313 inches FOR PERSONAL USE ONLY. IF YOU…
This is a 2009 Volkswagen Fox, it is a slightly rare Volkswagen car. I hope you enjoy printing this!
Hi This is a case for XL6009 Boost Buck (step up/satep down) Converter like the attached picture. The converters dimensions 25mm x 48mm You can use zip ties to hold the in and out wires. Print Settings Printer Brand: Creality Printer:…
A simple adapter to mount an SSD hard drive in Apple iMac 2009-2011. Printing time approx. 31 minutes 8 grams of filament Category: Computer
3D scans of models from 1980 Grenadier set. The table top was quite difficult to get scanned. There is an edited (non-manifold) version that removes the blue tack that was used to hold it. I may update that one if I get the chance. I do…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
Lost the cup holder dividers and didn't want to pay an arm and a leg to get new ones. The front divider is adjustable, like the original. (Just not as pretty. ;) ) In the picture, the sizes weren't quite right. The stl's should fit. Feel…
please follow us on instagram & tag us if you printed it: https://www.instagram.com/3dprintkings Print Settings recommended to do a color change by script at height 3.50mm and use a prime pillar Category: Keychains
The internet is full of guides on how to give a broken 2009 27" iMac a second life by converting it into a standalone monitor. While many solutions often resort to makeshift fixes like hot glue guns, this kit offers a more sophisticated…
This is the standard movement spacer ring used in the Seiko 7009A type watches.
I needed a mount for my RB5009 that fit in a LANBERG 10" rack cabinet. This rack cabinet is a bit narrow, so the stock brackets didn't fit. There's about 1mm of space on each side of the RB5009, which would make any 3D-printed…
These little useful PCBs are produced by many Chinese manufacturers, so the dimensions of the boards and the position of the components may differ sometimes slightly and sometimes significantly. Before printing, make sure you have the…
Case for LM2596 and XL6009 DC DC converter. For example it is compatible with: LM2596S DC-DC Buck Converter DC 3.5-40V bis 1.25-35V 3A Step Down Spannungswandler Hohe Effizienz Power Supply Module(5Pack) : Amazon.de: Baumarkt and ICQUANZX…
Transform the underutilized cubby in your 12th-generation Ford F-150 (2009-2014) with this custom insert designed to mount the Auxbeam AR-800 RGB Switch Panel. This is a heavily modified remix of a model originally found on Thingiverse…
Mount the Ridgid charger version R840095 to a wall - used @Abomb 's advice and printed on the side with tree supports.
Printed this replacement for a friend. He drivers VW Passat B7 and it fits like a glove. Original has some kind of rubber gasket (it could be hand cut or maybe channel for the gasket could be filled with silicone).
This model is compatible with the lego system.
Hello, this is a remix from: https://www.thingiverse.com/thing:1625233 I changed the dimensions a little bit and changed the part to make it easier to print. I also added a locking mechanism so that you don't need a cable tie anymore. I…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
About Remix of Aneng Multimeter stand, added 2x2 gridfinity base with magnets and a box on the back to keep probes in it add magnets and it will be even more stable added version with more ‘flat’ angle for better reading the screen,…
This is a replacement hook for the trunk organizer for a 2010 Toyota Camry. It should fit 2009 to 2017 models though? It uses a 25mm x 5mm wood screw (1" x ¼" is fine too) to splay the fingers. I printed it in PLA+ but it would probably…
As it said in original model - can be printed on printer with 220mm x 220mm bed if you'll rotate object on 45°
Deutsch: Wandhalterung für den E-Bike Battery-Charger 0660 der Marke Fit. English: Wall mount for the Fit e-Bike Battery-Charger 0660. If you'd like to support my work with a small contribution, you’re very welcome to do so here. Thank…
The Design If you're the proud owner of an older Subie, you know that having fluids on hand is just a good idea. This little cubby in the trunk is the perfect size for an oil quart, a pair of gloves, etc. but things are always sliding…
Overview This collection is my attempt at creating a crypto currency mining server, using a generic 4U Server Case converted to contain Graphics Cards (GPU). You could also use this setup as a neural network trainer, render farm,…
Halter für Märklin 7009 Masten (alte Version mit Schraube) für Blechbrücken. Mount for Märklin 7009 masts (old version with screw) for tin-bridges. Filament: Prusament PETG Pistazie (painted) Category: Buildings & Structures
This model is compatible with the lego system.
seen where someone had made something like this for the newer mustangs 2010 - 2015 i think they was, but i downloaded an tried them an they would have worked but the bolt in the center sticks up to high an hit so i came up with my own…
I've repurposed toilet paper rolls for many years to manage cord tangles by keeping the cord bundle tightly wrapped. But, it's limited to the length and thickness of the cords - some are too bulky to utilize the rolls. And some are too…
This is a Sketchfab converted and customized model, it is a 2-model pack that consists of: 2009 Pontiac G3 2009 Chevy Aveo Original model: https://sketchfab.com/3d-models/2009-chevrolet-aveo-0b2cf39c664043ccbdb5fa0261ae5644 Happy printing!
3d scanned and improved in 3d software to tighten the c-clip part. This was from a ford fiesta 2011 but fits 2009-2014
I've found good use from my tool caddy (found here) for a couple years now so it's time for a refresh - by itself, the shape of the caddy evokes the idea of ascending a mountain. I wanted to keep its versatility, but taking lessons from…
Video Games - Resident Evil 5 - Jill Redfield - 2009 3D printable model.
My friend has a 2012 Toyota Corolla, and his Keyfob exploded. He reached out, and a short time later, I found a model on Thingiverse. I printed it but disliked how we couldn't find actual hardware or how some of the tolerances weren't the…
ASA Druck selber erstellt, über eine Bewertung würde ich mich freuen .
Sci Fi Movies - District 9 - Prawn - 2009 3D printable model.
Description: (Introduction - The Problem) Is the gear shifter in your Ford F-150, Expedition, or Lincoln Navigator feeling loose, sloppy, or missing that satisfying "click" when you move it between gears (Park, Reverse, Drive, etc.)? Did…
Single piece hanger to fit a Ridgid 12cv lithium R82009 drill. Screws flush against wall. Quick and dirty design. I've not used supports, but my printed handles overhangs very well. As always, PETG is ideal for functional prints, but PLA…
Napkin rings seem to be a natural fit for 3D printing in vase mode. You can scale the size, change the color to match your place settings, never be short one for each of your place settings, and entertain all sorts of designs to suit your…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** A locking box to stow and protect your poker deck.…
2009 Lamborghini Gallardo LP560-4 Spyder 3d modle
Case for Step Up/ Down Converter XI6009. Only for the red one, which can step up and down (XI6009 Converter)! -No Screws needed, Top parts just clicks in -Hole in the top part for adjusting potentiometer -Screw terminals used from…
This is a Tuna Type Shroud I designed and made similar to the Dragon Shroud being sold online. Print this with some supports, if you can break it up and avoid it in the corners it can be easier to remove. It is designed with some 45…
I have a french door style LG refrigerator (specifically model LFXS26973D /01 ), the left hand door has a mechanism that runs the height of the door to keep it closed, the right-hand door, however, only has a small plastic clip at the…
Part number 20100993
just made the hole on the other side and reduced the pillars that block the board inside, they were too large for my board. to keep it closed you need to use tape. Category: Electronics
Definitely print this in PETG, on its side, and with supports. You want the layers to run all the way through the hook and vertical walls of the base. I used supports with minimal blocking (see picutres). You really don't need to clean…
Stargate Atlantis - Dr. Rodney McKay - 2004-2009
Latch for 2009 Kia Optima Center Console. I broke it in my car, FTIJPI!
Panel for 1 din player and separated A/C control (mean original sound and climate control has 2 different board)
Rear axle hub carrier for HPI Maverick Strada MT (2017 edition, MV12623), original part number MV22009. Also compatible with: Redcat Volcano EPX Pro, HSP Brontosaurus, Exceed Infinitive, Himoto EMXT-1, Amewi Torche Pro (which are…
I created this to fix my brittle cracking AC vent rings in my Mazda 6 2010. It should work for all Mazda 6 2nd gen cars and likely Mazda 3 2nd gen cars as well. I'd recommend printing in PETG or other higher temp plastics as PLA will melt…
RCA socket adapter for SME 3009 & 3012 (series 2) It comes without a hole for the locking screw. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 40% Filament: any PLA any Category: Music
![#0099 Latching Poker Playing Card Hard Case [w/Diamond Pattern]](https://media.printables.com/media/prints/589876/images/4716360_968ca957-dbcc-498f-b4db-c3b271dec7ec_2a661ca2-b8fe-4f07-8282-6968b1af301f/20230923_083207.jpg)
![#0096 Hexagon Tool Caddy [on turntable]](https://media.printables.com/media/prints/552610/images/4695301_69e3e9be-436c-4571-a2ec-9843c3822bbc_a365f34e-bdac-4f53-9605-02db321a238e/20230921_000452.jpg)
