1300 modeli
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
Wydruk około 2,71 €–3,32 € nettoWstępna wycena jednego wariantu
Bonsai pot 31 rectangular beveled 199x149x56mm, Support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
Accurately dimensioned model of the Stanley 1992 blade. The bottom length is 62mm, the trapezoidal height is 19mm. The trapezoid angle is 51 degrees. The notch spacing has also been accurately measured.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a third brake light assembly I designed around a cob led strip light to replace the dated OEM light. I tossed mine when I stripped my interior and wanted to design my own so here's what I came up with. I printed this in ABS CF as…
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
I created this to replace one that melted when a bulb was misaligned. I recommend PETG, ASA or something better. It fits the vehicle I made it for just fine. The Oneshape model is linked below, feel free to make it better. Use at your own…
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The lid and timer knob on my circa 1990 Braun Coffee Grinder broke and, even though it is very loud, I did not want to part with it. So, I created these 3D printed repair parts that both served as replacements for the lid and knob and…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Viz Manual_1990_CZ.pdf See Instructions_1990_EN.pdf Hotový model na fotografiích je na prodej. The finished model in the photos is for sale.
This is a remix of Korb3n's excellent easy print Space 1999 Eagle. I updated many parts and fixed many STLs that were not water tight. My version now requires printing alignment cubes to put the model together. This reduces the amount of…
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
Does your child ever need just a few more track pieces or a track piece that doesn't exist? Now you can fix that with 3D printing! There are currently 30 track shapes, with 199 unique variants! Track types: Straight 39 variants (length,…
Přeneste si kus historie motorsportu přímo na svůj stůl! Tento detailní 3D model reprodukuje ikonickou přilbu Ayrtona Senny z roku 1991 – sezóny, kdy závodil za McLaren-Honda a zářil svým nezaměnitelným stylem na trati. ✨ Vlastnosti…
Miniature of Simba from the original Lion King movie.
As you can see in the pictures, this is a two part design. You will need to print the mounting clip and the actual cupholder. The clip is mounted in the passenger footwell by removing the forward screw on the center console near where the…
Bring the power of American muscle to your shelf! This high-quality 3D model of the Chevrolet Camaro 1990 is a detailed STL file perfect for collectors, automotive fans, or scale model enthusiasts. Designed with clean geometry, this model…
This model is compatible with the lego system.
Print this as large as you can get away with. There is enough detail that a bit of paint picks out the details well. The trusses are small enough gaps that most 3d printer will bridge teh gape without supports. 15% infill
The Door Handle Door Lock Rod Clip on my 1998 Honda Accord, this clip does the job as a replacement part. Tested on the front doors only so far, right and left doors need a mirror version but I've found the non-mirrored version also…
🧱Lego Duplo Brick 2x8 #4199🧱 RICORDATI CHE OGNI PERIODO DI GIORNI PUBBLICHIAMO I NUOVI PROGETTI (ANCHE LEGO) QUINDI ISCRITIVI,👤 SCARICA⬇ E LASCIA UN LIKE👍. REMEMBER THAT EVERY PERIOD OF DAYS WE PUBLISH NEW PROJECTS (ALSO LEGO) THEN…
This is my take on the HANKA Robotics Spider Tank from Ghost In The Shell. I included 2 heads - 1) the original 1995 anime version with horizontal slit eyes and 2) the 2017 version which has 3 dot eyes (not screen accurate - 2017 version…
This is a repair part for your GMT800 front door arm rest clip. The door switch panel clips into it. The originals are prone to breaking with age and then the switch panel flops around. Print in ABS or PETG for heat resistance. Printed…
Own a piece of automotive legend with this 3D printable STL model of the 1993 Porsche 911 (964) Turbo. This legendary German sports car model is perfect for automotive enthusiasts and fans of air-cooled Porsches, showcasing iconic design…
Here's a dodge ram grill emblem. I've included files to print it in two pieces or one piece. I printed the base in black and the logo in red to match my truck. There's a slight curve, so supports are required touching the build plate. I…
A mazda Miata body to be used with open z V16 chassis, it comes with a 90mm wheelbase, using screws fixation. Print Settings Printer Brand: Prusa Printer: Prusa Clone Rafts: Yes Supports: Yes Resolution: .15 Infill: 10% Filament: Does not…
Skoda Fabia 1 (1999 - 2007) phone holder on dashboard Diameter of the ball is 17mm I used the Baseus Car Phone Holder from Aliexpress as the holder itself https://s.click.aliexpress.com/e/_DBAMS11 It is necessary to print the model split…
I recommend using the .3mf files. This is a modified version of Binchotan's console hinge from Thingiverse. When I tried his design, it immediately broke due to how thin the walls of the hinge were. I thickened the walls, made the hinge…
Miniature of Pumbaa from the original Lion King movie.
DONATE: https://paypal.me/JuanCMedina21?locale.x=en\_US Use customs support (see picture for support placement) Recommend to print with 0.24 Layer height and lower speed for overhangs to avoid using supports. Printed with TPU 1999-2001…
Found this file in one of my model download files from back in 2014 and thought I'd post it. I checked first to see it handn't already been uploaded here on thingverse and see that it has. The only difference I can see with this model is…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Please click if you appreciate my work :) A dark knight’s ride. The Gotham Batmobile – now on your wall. This 3D printable wall-mounted model of the 1990 Batmobile , inspired by Tim Burton’s “Batman” and “Batman Returns”, is a must-have…
1/24 Scale 1996 Ford F250 for Axial Crawler Body
The shafts on your radio for these knobs may or may not have little metal clips attached to them (see pic on right), which changes the diameter. Make sure you print the knob with the correct sized hole, either “WITH CLIP” or “NO CLIP”.…
Stanley Knife N°199 comes without any protection, so I made my own belt holster. I have done several iterations, but v5 works by far the best. Designed in Onshape:…
This model is a 1994 Ford F150 regular cab pickup truck, or it can be a monster truck. I have added a monster truck undercarriage and wheels. For the silver details I used a silver Sharpie and for the axles I used a piece from a…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Update 11/19/2025 - Recent request for the outside slider cover, so I decided to go ahead and add it in. I also did a mild update to the inside slider cover. I think I can do a better job but if this means someone's headphones work vs…
Summary This was a personal project, trying to model my old 91 Toyota Pickup/Hilux (1.5 cab, V6). It is not perfect - mainly in the grill area, and the wheelwells, but the proportions are modeled with help of side, front, and top view…
Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!
I recently got a very low mileage 1999 Civic... after a lot of searching there was no design to be found so i drew my own and now i'm willing to share it. Speakers used were JBL Stage 602E and i'm pretty sure others will fit too with a…
This model is compatible with the lego system.
NO MMU NEEDED I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
*** Thanks for checking out this model! *** If you appreciate what I'm doing, buying me a coffee would be a wonderful show of support! Good quality designs take time, skill, and CAFFEINE! ;-) And then check out my other models for…
Emblem for 1996-2000 HONDA CIVIC Category: Automotive
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Änderung (4): Teile können jetzt mit M3 Schrauben verbunden werden Änderung (3): runde Tasten geändert, Zifferntasten zweiteilig Änderung (2): Teil 1 mit Gürtelclip Änderung (1): Löcher für Tasten “7-8-9” angepasst. Erster Entwurf, soll…
I wasn't able to find any F1 logo from this era that I liked, so I put my own together in TinkerCAD, using a copy of the official logo, so the dimensions are accurate. I borrowed the base from another great F1 logo:…
Das Modell habe ich mit Fusion 360 erstellt, mit 0,10 mm Detail und Stützen “gesliced” und mit 100% Infill in PLA ausgedruckt.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Miniature of Timon from the original Lion King movie.
I made this chain slider for a yamaha xt350 since the actual part is really hard to find in my country. So here it is in case anyone needs it. You will need to rotate it in your slicer, also print it with supports. I would recomend to…
This adapter system wraps the edges of a PROTOPASTA 199mm cardboard spool in order to: provide smooth rotation within a Bambu Lab AMS prevent carboard debris from depositing within a Bambu Lab AMS Features: Reusable PROTOPASTA nameplate…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A kit card of one of my favorite Corvettes the C4 1983-1996 model. The tires should spin if the axle is glued in right. I also sell these on my Etsy: https://glacierfrost.etsy.com
This model has been ripped from the RIDE 5 games files. All credit/ support should be directed to Milestone s.r.l. I cannot guarantee this model is printable/ watertight. Some repair/rebuilding might be necessary.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
About model My custom design of armrest plug for front seats in Volkswagen T4. Made for a friend's Multivan. Compatibility For T4 Multivan / Caravelle / California. Model year: 1996 to 2003. Diameter: 35 mm Modifications I optimised…
Wall Art Silhouette model of the Mazda Miata MX-5 NA Roll bar 1994. Adjustable size. I accept model requests and ideas.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Space 1999 Eagle transporter display stand. This is made for my near 1:48 scale (22") custom Eagle transporter (not included), but might work also on smaller ones by just scaling up and down. Stand is all in one file. The Alpha Moonbase…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
The “real” Volkswagen counterparts to these models have a propensity to spontaneously vanish from the vehicle, due to aging plastics and a harsh, vibration- and wind-heavy environment. I have literally never seen an actively-driven…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A kit card of one of my favotite models of Corvette the C5 1997-2004 model. It needs some glue on the axles but should have spinnable wheels. I also sell these over on Etsy: https://glacierfrost.etsy.com
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is the 4x4 Crawler Exclusive Edition set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the…
Keyring with Volkswagen 1995 logo on it. I printed it with 0.2 mm layer, 100 % infill.
Space 1999 Eagle 1 landing platform for Space 1999 Eagle 1 by Al Mon: https://www.printables.com/model/21219-space-1999-eagle-1/comments/2052312
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Just a simple switch panel I knocked up to replace the stock one in my 1998 Jeep Cherokee and that a few of my friends now run as well. I designed it to get rid of the 12V socket (lighter) and instead I run a screw in dual USB outlet with…
This model I created to mount the wideband in my GMC Sierra 2006.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I designed the basic dimensions based on the 191 819 707 C or 191 819 719 B (Both are written on the same part), feel free to remix it to fit a gauge for example, sadly the “max” hole size is 45mm but you can probaly get up to 49mm with…
Remix of CustomFPV and Aerial Outlaws' Camera Mount for tiny whoops Features Available Angles: 10°-60° @ 1° interval apart Mounting Pattern: 25.5x25.5mm AIO/Whoop mount Weight: 0.5±0.1g No 42° angle. Why? Because we have 42.5° Note: A…
The Dodge Viper GTS-R is a legend in the world of motorsport, renowned for its victories in the GT2 category and its iconic presence in the 24 Hours of Le Mans. This 3D printed shell of the Viper GTS-R pays homage to the vehicle's storied…
Remixed design by MB96 to be smaller, print faster with less material, and allow removal of the unit for easy battery replacement or on failure (I've had 1 out of 10 fail so far with a bad display). I used both hot glue and contact cement…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Experiment in tracing a picture and converting it to a 3d model. Printed on Prusa Mini using Prusament PETG with 15% infill at 0.20 layerheight, no support needed. Approximately 15 min printtime.
Remix of Jor-el19's Thingiverse Space 1999 12" Eagle Stand resized and remixed for Dinky Sized Eagles. Printed in Econofil PLA Light Grey. Files include plain, embossed with a cross and with a cross cutout for lighting with leds from…
Safety warning Do not use consumer-grade/desktop 3D-printing for this application unless you anneal the prints in an oven and even then, don't go beyond 6mm thick. Laser cutting or CNC milling HDPE plastic up to 12.5mm (1/2") is OK.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
One of the few negatives of first gen Tacomas are their door handles which are known to crack. Some of the non-OEM handles are made out of a materiel that does not hold up in freezing temperatures. After snapping a handle this winter I…
![#0199 Star Wars Fanout Card Case [ Galactic Empire ]](https://media.printables.com/media/prints/1197976/images/9008966_ba0d379a-b3cd-4871-9fd5-95e0c024c9ed_fef5bf41-d887-48cd-a53f-6760f1489d45/fanout-card-case-ge.jpg)
![CustomFPV Camera Mount [c03 and 199c]](https://media.printables.com/media/prints/930d6a8d-46e6-4e81-b591-c6780ca1996c/images/10251982_e6ee577b-267c-48b4-a294-91b5262a02c1_d997eea3-1545-4a42-806c-5165a3826da0/20250716_174610.jpg)
![Subaru Suspension spacer lift-kit anti-sag templates [Legacy, Outback, Impreza, WRX, STi, Forester - various years 1990-2026]](https://media.printables.com/media/prints/44b44ccf-34bd-4dcf-aaf0-5ba3365ce514/images/11800929_ef583532-e08f-4393-a7b3-1f879f95504b_1922b272-25b2-40f6-acbe-62002f49281c/screenshot-2026-01-21-185927.png)
