Liczymy pasujące modele…
I seen how expensive the badges are, so design them. (Made it it for a friend) Perfect size to the originals Recommend print in ASA plastic with 100% infill (UV resistance) Small LIMITED badges are for the sides (X2) This look me a long…
About model My custom design of Loudspeeker trim (front door) for Volkswagen T4. Made for a friend's Multivan, because I didn't like an already available multipart cover with need of glueing on Thingiverse. Compatibility For T4 Multivan /…
1/24 Scale 1996 Ford F250 for Axial Crawler Body
I recently got a very low mileage 1999 Civic... after a lot of searching there was no design to be found so i drew my own and now i'm willing to share it. Speakers used were JBL Stage 602E and i'm pretty sure others will fit too with a…
Emblem for 1996-2000 HONDA CIVIC Category: Automotive
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A kit card of one of my favorite Corvettes the C4 1983-1996 model. The tires should spin if the axle is glued in right. I also sell these on my Etsy: https://glacierfrost.etsy.com
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This free 3D model is based on Dorothy , the iconic weather research device from the 1996 film Twister . In the movie, storm chasers use Dorothy to deploy hundreds of small sensors into a tornado, hoping to study its inner workings and…
I started working on this on start of quarantine in 2020 when I got my first 3d printer and somewhat learnt how to use Blender and Fusion 360 modeling programs and it took about a year because I was always putting it off. Included files…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Welcome to 1996, a time when “Low Poly” was the best a brand new PC (sporting MS-DOS or later on Windows 95) could sweat out onto bulky CRTs. “3D printers” were already around - but most people very likely would have had to rob a bank to…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I've printed it in ABS as car can get quite hot in the sun, on the picture there is a fuzzy skin option used but printing next time I'd skip that, the effect is not even close to the original facture
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is my center console box for the 1996 to 2000 toyota RAV4. My personal car is a 1999 4 door but it fits in any model with the single cup holder center console. It is heavily inspired from the real OEM center console box but its not a…
Suzuki GS500 1996-2006 Cover for Clocks Skechup file included - feel Free to remix and share Category: Automotive
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Iconic Movie Moments - Independence Day - White House Destroyed - 1996 3D printable model.
From Dusk Till Dawn - Seth Gecko Suit (George Clooney) - 1996 3D printable model.
From Dusk Till Dawn - Seth Gecko Taking Aim - 1996 3D printable model.
Happy Gilmore - 1996 3D printable model.
Iconic Movie Moments - Mission Impossible - CIA vault break-in - 1996 3D printable model.
Murder She Wrote - Jessica Fletcher (Angela Lansbury) - 1984-1996 3D printable model.
From Dusk Till Dawn - Seth Gecko (George Clooney) - 1996 3D printable model.
Fresh Prince of Bel-Air - Will Smith (Will Smith) - 1990-1996 3D printable model.
Fresh Prince of Bel-Air - Hilary Banks (Karyn Parsons) - 1990-1996 3D printable model.
This is a bumper for the center console on the 96-98 Jeep Grand Cherokee ZJs. I printed mine in Polymaker 95A TPU. I recommend cleaning up the old holes with a 10mm drill bit by hand (not in a drill!) and/or blade and/or wire cutters. One…
Fresh Prince of Bel-Air - Carlton Banks (Alfonso Ribeiro) - 1990-1996 3D printable model.
I designed it for my son, it's fully printable in various colors. Give it a like if you liked it, just knowing that makes me happy. I also added two holes of approximately 11mm by 1mm on the base so you can attach a neodymium magnets.…
I needed a rubber bumper for my OBS F350 hood so I copied one. I printed with Overture TPU with 3 walls and 15% cubic infill. It was a little soft so I would probably try 4 walls and 20% infill. 6 walls and 25% was too much.
seaQuest DSV - Deep Submergence Vehicle 4600 - 1993-1996 3D printable model.
It's a work in progress, download it and do with it what you'd like
Fresh Prince of Bel-Air - Ashley Banks (Tatyana Ali) - 1990-1996 3D printable model.
Fresh Prince of Bel-Air - Philip Banks (James Avery) - 1990-1996 3D printable model.
Hi! I needed a decent phone holder for my Volkswagen T4 (1997) so I designed one. Fits a Samsung S10 / S9 perfectly. Maybe even other phones. It is very easy to print. The holder consists of five small parts. The actual holder for the…
seaQuest DSV - Nathan Bridger (Roy Scheider) - 1993-1996
Happy Gilmore 3D printable model. Easy to print, but be careful when removing supports from the golf club, very fragile.
Fresh Prince of Bel-Air - Geoffrey Butler (Joseph Marcell) - 1990-1996 3D printable model.
seaQuest DSV - Commander Jonathan Ford (Don Franklin) - 1993-1996 3D printable model.
My daughter got a big bag of Barbie playsets from the 90s, so naturally some parts were broken or missing. The attached photos are the installed part, the printed part by itself (after support removal), and the picture of the original…
Držák měrky na olej v motoru pro VW POLO 6N1. Vzhledem ke koncernovému pojetí VW je možné využití i u jiných vozů VW a jeho koncernu (SEAT, AUDI, VW před rokem cca 2000). V motorovém prostoru prvky trpí vysokými teplotami a časem všechny…
seaQuest DSV - Lucas Wolenczak (Jonathan Brandis) - 1993-1996 3D printable model.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Fresh Prince of Bel-Air - Vivian Banks (Janet Hubert) - 1990-1996 3D printable model.
Cemetery Man - Gnaghi - 1996 3D printable model.
seaQuest DSV - Captain Nathan Bridger - 1993-1996
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Cemetery Man - Boy Scout Zombie - 1996 3D printable model.
Reverse Gear shift Lever Knob for Ford Mondeo 1996 Tirador marcha atras de la palanca de un Ford Mondeo del 1996
seaQuest DSV - Dr. Kristin Westphalen - 1993-1996
seaQuest DSV - Lucas Wolenczak - 1993-1996
Cemetery Man - Francesco Dellamorte - 1996 3D printable model.
This part needs to be printed out of a flexible filament.
If you need help with adding textures to the obj file in Fusion, message me!
This is my cup holder for my 1999 RAV4. It installs to the passenger side seat bolt. I have printed it using Bambu Labs PETG HF using 15% infill in two separate parts, then glued together with JB-WELD plastic bonder. Seems sturdy enough…
Iconic Movie Posters- The Shawshank Redemption - 1996
seaQuest DSV - Dr. Kristin Westphalen & Lucas Wolenczak - 1993-1996
The Craft (Jóvenes y brujas en España y Jóvenes brujas en Hispanoamérica) es una película de terror sobrenatural estadounidense de 1996 dirigida por Andrew Fleming. Bonnie protagonizada por Neve Campbell en escala 1:10.
This is a third brake light assembly I designed around a cob led strip light to replace the dated OEM light. I tossed mine when I stripped my interior and wanted to design my own so here's what I came up with. I printed this in ABS CF as…
Cemetery Man - She in the TV - 1996 3D printable model.
Cemetery Man - She on the Ground - 1996 3D printable model.
Print with the front of the clip facing down, only supports will be needed on the coin holder, and I added the SLDPRT files if you're looking to modify the part!
Replacement shell and buttons for a 1996 ISUZU Bighorn SUV. There is a parametric file included that can be opened in Fusion 360, if it is needed to be tweaked into a different fob. It needs the original PCB box, and depending on the…
I wanted to put a phone mount behind my steering wheel for navigation on my old 1996 Toyota Rav4. I have an iPhone 13 Pro that I use on my commutes on the interstate to/from work. I wanted more of a “heads up” display that let me drive…
this is a 3d scan of a 1992 f350. I grabbed this to make a bumper for my buddies truck and figured it might have some use to other people. Have fun! If you make or design something cool, share some pics or screenshots I wanna see what…
When life takes your doohickey, you clone a doohickey… to make super-doohickeys. Must be printed or painted green. If not, other Viper owners will point at you and laugh. And you know what? They're right to do so. From…
The Craft (Jóvenes y brujas en España y Jóvenes brujas en Hispanoamérica) es una película de terror sobrenatural estadounidense de 1996 dirigida por Andrew Fleming. Nancy Downs protagonizada por Fairuza Balk en escala 1:10
1996 SeaDoo GTX Choke Puller Requires (1x) M2x12 socket head machine screw Designed to take two screws, but I didn't allow enough tolerance for that to work out.
Dodge Viper GTS 1996 as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
The Hertz CP 26 tweeters were the closest I could find to the stock tweeters. Here's an adapter. You will also need an M3 screw that's 12mm in length. Link to OnShape model:…
Model of a crotch vent for rav4 1996. If you dont have one and want one, you can just pop the cover under the stearing wheel, cut the hole in the vent and pop this thing in. No more sweating in hot summer days! Print two washers, so you…
Skoda Felicia - 1996 pre-facelift Recommended settings: - 3 walls - 15% infill - No brim - Print with PLA - Print upside down like on the photo for better result - 3mm thickness recommended - Scale as you want
I made this cup holder since the jeep xj does not have any, which is very annoying for daily use and if you are offroading. This cup holder fits cans and yeti thermos just fine and they wont fall out (unless you role your rig. Keep the…
A simple mockup for the STANLEY 1996 hook blade. I've created it to test my Sustainable Safe (Balloon) Cutter Knife .
Jaguar XK8 XKR 1996-2000 Light access Flap replacement part for the rear access light flap
wiper linkage nut Ford Explorer 2 1996
Dodge Viper GTS 1996-2002 Racing
This is for adapting the filter S&B makes for the 6.5 with a 3-inch output, to the Holset 54mm with a 4-inch intake that quadstartuning sells. Printed with fillamentum Flexfill 98A, I used some duct seal around in just to make sure there…
Fits 1984-1996 Jeep Cherokee. Fitment on 1997-2001 models is not verified, so please measure yourself if that's your application. This floor plug fits the larger holes in the front floor pan on both the driver and passenger side.…
Based on the famous scene from Twister, I made a sculpture/statue of the flying cow scene. Most likely will need Supports.
designed this simple bracket to install the JDI push to start kit on 1996-2000 civic(EK civic), it holds the steering column covers in place when removing the ignition switch use 2 self tapping screws on the bottom, find a bolt that…
This is my custom Center arm rest with cupholders and storage bin. I measured it to fit the lonely cupholder in my 5-door RAV4 and I opted to have two cupholders and half of the space dedicated to an armrest, but only for the driver. The…
J'ai voulu réparer ma vieille montre Casio MDA-100 de 1996. La couronne était fendue et je l'ai imprimée en PLA sans supports. Le disque en métal est collé dessus.
Solifer 1629-5150 S/S1 1984-1996 air filter housing for Suzuki PV50 engine with Mikuni VM12/VM14. Ilmansuodattimen kotelo. Solifer # 1629-5150 (1629-5151+1629-5152)
EDIT: I installed these and they lasted like 3 days in the summer, i will revisit this, but for now I'm just leaving the key caps off as they still work without, just not very pretty... This generation of plastic horn buttons is getting…
Multi-layer 3D model of Kirby from in his classic victory pose. 3d modeling started as a passionate hobby that I would use to make decorative things for my room on my DIY 3d printer and has evolved to explore many different types of…
Twister is an automated fighter that you can play solo against or team up on the Twister with a friend. This was a set designed by my brother, and I created the 3D printed files for him. The insert is designed to fit in a solo character…
Make sure to print this with PETG or another reasonably heat-resistant filament, especially if you live in a hotter climate. PLA is not the best choice for this print. Also, make sure to enable supports. I've found that using tree…
The front brackets that were meant to receive the pins on the rear windscreen of my 2003 C70 broke, so I modeled this part up. Print parts in a material with good heat resistance. Mine were ok in PETG, but higher temp filaments like ABS…
Źródło oznaczyło ten model jako treść 18+.
This is a replacement lid designed specifically for the vintage 1996 Retro Le Creuset "Seal & Store" container. If your original lid has cracked, warped, or gone missing over the years, this model will make your classic kitchenware…
1996 SeaDoo GTX Choke Puller Requires (1x) M2x12 socket head machine screw Designed to take two screws, but I didn't allow enough tolerance for that to work out.
This is my cup holder for my 1999 RAV4. It installs to the passenger side seat bolt. I have printed it using Bambu Labs PETG HF using 15% infill in two separate parts, then glued together with JB-WELD plastic bonder. Seems sturdy enough…
