Liczymy pasujące modele…
This is my interpretation in Gauge 1 of the NS Zuurpottenwagen 520704 - N.V. Koninklijke Nederlandsche Zoutindustrie Boekelo. Before suitable corrosion resistant metal alloys were available to build tank cars, acids and…
This is the 6x6 All Terrain Tow Truck set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…
Cell holder for 20700 Li-ion cells from Dyson products. Remix from : https://www.thingiverse.com/thing:4700523
Akro-Mils 20701 Bin: Fits in 10726, 10164, and 10144 units. One of mine got stepped on and broken, so I came up with this 'lil guy. This model is designed to be used with vase mode and should be a drop-in replacement except that they…
2x3 cell holder for 20700 Li-ion battery. 20700 are mainly used on Dyson products.
1x6 cell holder for 20700 Li-ion battery. 20700 are mainly used on Dyson products.
Customized Arcachofo's Universal battery holder with jag's Dovetail module to create this 20700 holder. Now you can customize it and combine multiple parts to create a gigantic battery bank if you want. Some other tweaks added: Chamfer at…
Fits Akro-Mils small plastic drawers, which can be found on a variety of Akro-Mils Plastic Bin Cabinets (i.e. 64 drawer, 48 drawer, etc.). Tray (vs. printed and/or stock dividers) prevents small parts from slipping underneath the…
The sleeve length is the size of the 20700. If you need the length of the 18650, in the slicer only change the size in the Z coordinates. I used a brim of 10 in printing.
Universal battery box. For two 18650 or two 20700 batteries.
Model Pražského autobusu Renault Citybus 12M. Vytvořený v TinkerCad. Potřeba použít podpěry. Model udělaný na 3D tisknutí.
Model of the housing for the OWON XDM1041 Digitial Multimeter and DGE2070 Arbitrary Waveform Generator. Useful for mocking up attachments or modifications for your devices. Files included: .stl, .step, .obj, .skp
Had a problem with a D cell corroding in my flashlight and had to break the light down to clean it. This adapter uses a single 20700 cell to now power the flashlight. I made provisions to also use an 18650 cell instead. I previously made…
I recently purchased the OWON DGE2070 Arbitrary Waveform Generator and the OWON XDM1041 Digital Multimeter. I wasn't sure where I was going to put them as my workbench is very small. After moving a few things around, I decided that, if I…
I don't know if this ONLY fits the 2070 turbo, so I included a model that says “ASUS” instead of 2070 if you want to try.
A simple 20700 storage case with a very satisfying snap action instead of the magnetic or threaded versions. There is also a prettier version with a japanese wave pattern on the outer shell which was created in blender. The lid has 3…
Printed in two parts to avoid supports and have better adhesion. 20700 section can be used as a standalone for other projects. Battery clips are Keystone #209. I bought mine a few years ago from EBay but I found them on Amazon. The…
Found my old Coleman lantern with a dead battery. New battery about $15. Let's convert to lithium. Used two 20700 batteries from bad DeWalt XR 6A battery. Two cells in parallel should give me 6AH. I also used an adjustable DC-DC Step Up…
A dual 20700 battery case with a friction fit lid. Inspired by Wobbly74's 18659 battery case (Link: https://www.thingiverse.com/thing:1415903 ). I did not include the retention tab and I added a ridge for better grip when pulling/pushing…
20700 BATTERY HOLDER 12 CELL modular upgrades will follow like bms holder swappable usb port or light or,…
Remix of "18650 battery to 26650 adapter" by Orjakari (thingiverse.com/thing:4187707). 20700 to 26500 / 26650 battery adapter Snug fit. Tested with Sanyo NCR20700B 4250mAh lithium cell. The fit depends on your printer settings and the…
This is a case for 12 sets of the ride height adjusters (372070) for an Xray X12 RC race car.
Model of the rubber foot that I made to use while creating my stacking bracket for my meters. I only have PLA filament and never used TPU before. Not sure how well the dimension work for TPU, but with PLA it is a very solid fit.
Create an adapter for a 20700 battery to replace 2x D cells in series with protection and charging ability. BOM: 20700 battery (or 18650 with an adapter) Lithium-ion battery charing and protection board Some spare small wires About 10cm…
This is a Fusion 360 model for the Ride Height Adjuster for an Xray X12 21 (may work for other versions as well). You can specify the required offset as you like. I have created a set that fits in between the offsets that comes with the…
NVIDIA RTX 2070 LED cover because this graphics card does not allow to turn off light.
2.5U 19 inch rack front panel mount for Owon XDM1041 / XDM1241 / DGE2070 / DGE2035 These panel mounts require the DAP 2U MP-1 bracket. This bracket must be cut in half, with the two halves moved 2.5U apart. Print the front panel mount /…
ASUS Dual RTX 2070 SUPER Deshroud Mod (2x 120mm Fans) A simple deshroud mod to swap the stock ASUS Dual 2070 Super fans for two 120mm fans. Way quieter, much better temps, totally custom. Description Designed this for my ASUS Dual RTX…
This is a remix of a 18650 battery case to hold 20700 batteries Requires : 4x M3x16mm screws ( https://amzn.to/3Waj8w5 ) 4x M3x6x5mm Brass heated inserts ( https://amzn.to/3WtLaTe ) Print two copies, drill out the thin layer in the screw…
Philips Norelco, Oneblade QP652070 Case which includes razer, adjustable attachment, charge stand, cable, and a two pack blades.
This is a 3D-printed replacement / temporary fix for the HSP Racing 1/10 Scale Steering Set A (spare part number 20706) – steering servo saver top part . The original plastic component is prone to failure when paired with a strong servo…
A threaded container for ( qty 4 ) 20700 Batteries. Needed it for travel and safety to avoid batteries touching each other. ((Please, give model a LIKE 👍 when you download)) Enjoy and HAPPY PRINTING!!!
Should work for both the MINI and MINI OC variant since they are identical in size. BOM: 4x M3 Screws (5.5mm minimum) 4x M3 Nut
Had a problem, solved it by designing this stand for my vapes. Thought it could be helpful for other people also. Added the step file, so you can make edits in CAD or slice the file as is.
Had to cut a hole in my Silverstone SG13 SFF case to fit a RTX2070 Super card into it. The fans stick out the side of the case so made the cover, shroud for the fans. The 4 holes in the middle use the GPU cover screws to attach to the…
This is the 6x6 All Terrain Tow Truck set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's…
Should work for both the MINI and MINI OC variant since they are identical in size. BOM: 4x M3 Screws (5.5mm minimum) 4x M3 Nut
Had a problem, solved it by designing this stand for my vapes. Thought it could be helpful for other people also. Added the step file, so you can make edits in CAD or slice the file as is.
Due to the included acrylic lights being too flimsy, I had decided to make my own. After a few iterations I had came up with 2 different desings for my own aquarium which has a glass thickness of 80mm. You can use the Sol(Left) for both…
Schaffner FN2070-16-06 Inline EMI Filter Enclosure This is a passively ventilated, honeycomb enclosure designed for the Schaffner FN2070 series inline EMI filters. It is sized specifically around the FN2070-16-06 , though other FN2070…
