Liczymy pasujące modele…
V2 lépe sedí do helmy a lépe se do něj dává baterka. Tiskněte se 2-3 perimetry a výplní 35% aby zůstala zachována pružnost držáku. The V2 fits better in the helmet and the flashlight fits in better. Print with 2-3 perimeters and 35%…
Wydruk około 1,29 €–1,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
BROWSE ENCODER KNOB for Pioneer CDJ 900, 2000 Nexus and Nexus 2
Wydruk około 0,26 €–0,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Replacement of the plastic insert into rail holding the basket. That prevents the basket-holding rail from leaving the guiding wheels. It gets easily broken over time and is almost impossible to get hold of replacement. Recommend printing…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein Standfuß für den Monitor Acer GN246HL. Er ist 23mm hoch und hat eine leichte Neigung von ca. 3°. Er ist an den Fuß angepasst und dient zur Erhöhung um auf die Höhe eines anderen Monitors zu sein. Er wurde liegend gedruckt mit weißem…
Wydruk około 9,03 €–11,04 € nettoWstępna wycena jednego wariantu
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Introducing a custom-designed 3D printable HDD caddy, model SM17A06246, precisely compatible with Lenovo ThinkSystem models ST250, ST550, SR550, SR650, and SR850. In my quest for an additional HDD caddy, I realized the scarcity of readily…
Ferrari 246 F1. Modification for multi-extrusion printers. :-) Original model by 3Derp: https://www.thingiverse.com/thing:304828
My students and I are developing gridfinity shadow trays to organize the tools. Some fit better than others and most of them are setup for a 1in tool pocket depth. There will be more posted soon. Here is a tray for the M12 Driver 2462-20.…
I designed this support to hold my phone in my car because I couldn't find what I had in mind ;-) Fit the Mercedes Command Audio Screen (not touch screen). It is designed in two part with a dovetail for assembly. The frame can be equiped…
držiak na vrtulu lega vhodne tlaťit na SL tlačiarni.
This model is compatible with the lego system.
I have created a simple replacement housing for the Liebherr activated charcoal filters. The original housing included a filter fleece, which I wanted to leave out of my design and placed the struts closer together. Simply print in PETG…
For the Stromer charger (CR246) there are already some 3D models, but these are all rather made for garages or for apartments. I.e. in an environment where manual work is done, e.g. in a bicycle repair shop, these may be quickly broken.…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a bracket to mount the Andonstar AD246 or AD249 digital microscope to an InnoGear Microphone articulating arm which has a 3/8 threaded fixing point. I have included the step file in case anyone wants to do a mod. Link to the…
This model is compatible with the lego system.
This model is compatible with the lego system.
Fast Speed Shoot Castle / Crown Nock for 4 fletching arrows 6.2mm / 0.246 inch inner shaft Long version for 7.2 mm external shaft diameter Print with Resin
Disk trays designed to work with NetApp DS4243/DS4246 disk shelves. After five versions I'm finally happy with the design. Empty circles are added to decrease the print material and time required while at the same time not impacting…
Attaches to a #10, 1.5mm metal guard. Includes both 6mm and 3mm variations of the friction fit guard. Print with brim! Supports are optional. I painted them on in Prusa Slicer on the left and right edge of the incline, printed with the…
I bought a Netapp 4246 that come with absolutely no hdd drive caddies. Found a model that was available but did not like how hard it was to pull out drives when the chassis was fully populated so I modded it to be toolless and come to the…
Bloques compatibles con sets lego Basic-brick
I “jerry-rigged” 4 monitors to a TV wall mount but couldn't get the monitors to lineup just right. So to satisfy my OCD I created a tiny clip to hold the monitors just-so and just large enough to not block the LCD any. 🤓 Works great and…
Had this monitor laying around and decided to create a vertical stand for it. Since the back of the monitor is curved at the bottom i created two pieces for the best fit. Since it doesnt have a vesa mount, it wouldnt fit with vesa stands…
I needed a low profile mount to stick to my wall as a baby monitor. I used two XL 3M command strips (removable velcro tape) to adhere to the wall. I printed the mount out of some PLA+ at 5% infill and 80% infill around the little arm…
This friction-fit carb cover prevents the prop wash from interfering with the mid-range breather hole on the Walbro HDA-246 Carburator of the GP76 RC gas engine. It helps to smooth out the midrange when tuning the engine. It was…
Náhradní táhlo pro pásový bagr Bruder 2466.
Disk trays designed to work with NetApp DS4243/DS4246 disk shelves. Empty circles are added to decrease the print material and time required while at the same time not impacting rigidity. Scaled them to fit and more wholes for screws and…
Recommend you use a material with a higher heat resistance than PLA as PLA can soften at the temps the drives may reach. I can just barely fit 2 of the caddies or 6 of the blank plates onto a 200x250mm build plate. On the drive caddy,…
Based on ehughes100 design https://www.thingiverse.com/thing:1738733 . I resized it to fit my GarminNüvi 2460. It fits snug but it is easily removable as the power on button is on the top for this model. Fits with the mount. Nüvi 2460 is…
If your stock webcam mount is encroaching on valuable screen space, this thingymabob will correct that issue. Printed in PLA with no supports.
Passend für 3,5" Sata und Sas Festplatten für NetApp Disk Shelf DS4243 DS4246 Mit zwei Schlitzen für die LED Anzeigen. Category: Computer
Practical support for alexa, inspired by the Sydney Opera House, it tilts 20 degrees to be able to access the buttons more correctly, while in theory it improves its sound.
You can simply place it next to the rollers, as shown in the picture above. It serves to prevent any transported material from getting inside, so that the conveyor belt does not come to a standstill. I printed it from PLA with a height of…
Plamobil compatible toy chair - 6850246
ORGANIZZATORE GT246 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X2 / X3 PLUS
LEGO compatible 2466 Panel 3 x 2 x 6
Fit is really critical for this to work great… I printed it in PLA and PETG on a Bambu X1C. I am including my Bambu print files too. Print the cap plate flat, and the clip on its side for strength. Snap the two together carefully, they…
It's impossible to separately buy such things so it could be helpful in case of lost/broke original one. Recommended filament: PETG Infil: 30-40% DO NOT USE PLA !!!
This model is compatible with the lego system.
Remix of loopj's design. It's a bodge remix, could use some better modelling but good enough for my needs. When printing, use Gyoid infill pattern for better diffusion of light. TinkerCAD available at…
Ferrari 246 F1 printed in 9 colors Added motor, seat and steering wheel
The grinder was a little loose so installed an extra screw with two of these washers. See video below. Just scale in the Z-axis for a tighter fit if you'd like it, but I wouldn't risk it. These machines are designed without a screw at…
MK2 ring light for my digital microscope. I have evolved the MK1 design into a better more robust ring light, the screws that are used to hold on the lens cover now serve as duel purpose to attach the ring light. The bottom section is…
remix original Milwaukee Packout Compact Organizer
About the design This battery cover replaces the original plastic cover. The built-in clip on these covers is prone to breaking, and that is what happened. I designed this cover in Alibre Design Cad software. Printing Instructions Print…
Onefinity Cable Cover @ MKE Gadgets #246 In this video, I make a cable cover for the end of the rails on my Onefinity CNC router This cover add a clean look and keeps the cable protected. Link to YourTube You can follow me: Printable…
ARTE&DISIGN GT246 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Printed with Black PLA 0.6 Nozzle 0.3mm Layer Height 2 Walls Supports
This items will hold the Anker PowerCore 10000 (Model A1246). I have other models for different USB power banks in the works as well. Right now I also have this holder for the PowerCore Essentials 20k You will need two M2.5 Skadis T-Nuts…
My apartment bathroom has one of these weird toothbrush/cupholder things, and it doesn't quite do the job. This is my first attempt at fixing it. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution:…
The holder is positioned on the wall using one fixed and one variably adjustable French Cleat strip (1) . For securing, a clamping block (2) is pressed against the upper strip. This design ensures that the holder hangs securely and firmly…
MJX Transmitter GR-246 replacement stick, very easy to loose. May need to sand the base to fit. Category: R/C Vehicles
Hook for the CR246 Stromer Charger ST5
HYUNDAI HD-246 nozzle adapter
The ang mo kio flat 246-249 hdb block will be demolished by September 2018
Just a quick and easy printable holder to store the microscope remote control on top of the vertical beam. No support, printed hyper fast at 0.3mm layer and 150% speed on a old MK3S. Print it with the rectangular opening on the plate.
This is to mount an Athom HL-L2460DW presence detector to 3/4" conduit. I use it in a couple rooms that are unfinished in my basement where outlets are mounted on concrete walls. It slips right on the conduit and the pegs on the mount fit…
Cowing clip for a Mercedes part number: A1246280228 Print on sideways with support to get the right lateral strength.
This is a simple two-screw wall mount for the Ryobi P246 Multi-Tool. The tool was scanned (using a Creality CR-Scan Ferret SE), and the scan was used as a template for the mount surface. The mount surface is slightly enlarged and…
This is my first project. I prepare a box for all spare parts added to Andonstar AD246S-M. It is based on Gridfinity box 3x3x8.
I didn't like how floppy the drive was inside. I made this slightly too tall so you may need to trim it for your drive. pretty low effort I'm sure someone can make something better. Print it flat with support, I cba to re-orientate the…
Tridemorph (C19H39NO, CAS 24602-86-6) — a free educational 3D molecular model for teachers and students, by MolGod.org. Every sphere shows which element it is through an engraved symbol, not a colour code. Let the group sketch what they…
About the design This battery cover replaces the original plastic cover. The built-in clip on these covers is prone to breaking, and that is what happened. I designed this cover in Alibre Design Cad software. Printing Instructions Print…
Bloques compatibles con sets lego Basic-brick
This model is compatible with the lego system.
Center wheel cap for BBS Hammer Sport RT246 RT246 wheels Best printed in ABS / ASA Assembled with CA glue
The Persuaders-Danny Wilde-Tony Curtis with Ferrari Dino 246 GT - 1971 3D printable model.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Center wheel cap for BBS Hammer Sport RT246 RT246 wheels Best printed in ABS / ASA Assembled with CA glue
The Persuaders-Danny Wilde-Tony Curtis with Ferrari Dino 246 GT - 1971 3D printable model.
Targa Top Holder Bushing – Fiat / Bertone X1/9 4246300 📝 Description Are the original rubber or plastic bushings in the front trunk of your Fiat X1/9 cracked, worn out, or completely missing? This 3D printable replacement part is the…
