138 modeli
A custom made paint bottle holder for the Multiboard system. It is designed to be mounted using two small T-bolts and has a capacity of 22 paint pots or bottles up to 33mm in diameter, like those from Citadel, Pro Acryl and other hobby…
A paint rack for multiboard that fits 33mm bottles like Citadel. 20x and 10x versions. Should fit both short and tall containers. The racks fit side-by-side. There is a slight gap when you do, as my modeling skills are pretty basic, but…
A custom made paint bottle holder for the Multiboard system. It is designed to be mounted using two small T-bolts and has a capacity of 11 paint pots or bottles up to 33mm in diameter, like those from Citadel, Pro Acryl and other hobby…
If you need a flat, tileable hex-grid for playing games like Battletech or Gloomhaven that need a ~33mm hex size (Flat to Flat) these are for you! Two versions: Hex Playtile: Can tile infinitely in all directions, it is symmetrical.…
Zahlen 0-9 für Haus Nr. / Zimmer Nr. / Parkplatz Nr. o. ähnlich. für jede Zahl werden noch 2 Stück Holzschrauben ( am besten “ Linsen-senk ”) benötigt. Im Maßstab 100% sollten es Schrauben mit einem Schaft-Durchmesser von 2 bis 2,2 mm…
Fillet gaue for larger outer diameters. I found a different model here but it doesn't appear to be correct so I made my own. Beside the usual STL file, I also included a 3MF file for Bambu Lab owners (pre-coloured).
Dose mit Schraubverschluß für Kleinteile. Durchmesser innen 33 mm, fünf verschiedene Innenhöhen, 12 mm, 18 mm, 25 mm, 30 mm und 40 mm. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. ……………….. Container with screw cap…
A set of stock length upper suspension links for the AX24. I wanted a set of color upper suspension links to match the Orange body of the AX24 itself. Printed in Prusa Orange PETG
The original paint holders I found kept breaking as I was trying to get them off the print bed. So I added an additional support. I found printing it with supports and an adhesion layer is must.
Lehce modifikováno. Vnitřní průměr konstantní cca 33mm. Vnitřní průměr proměnný 26 - 29mm. Velikost rozstřiku zvětšena na 100mm. Bez podpor. Slightly modified. Inner diameter constant approx. 33mm. Inner diameter variable 26 - 29mm. Spray…
Immer wieder mal druckt man Lithohane Bilder und weiß nicht genau wie man diese präsentieren soll. Aus diesen Grund habe ich mir für die große die ich am meisten drucke einmal einen Rahmen erstellt. Maße vom Bild sollten sein 200x133mm.…
Sealing rings for air, water and other liquids (depends on used material). Available sizes are shown in table below. Difference of form A and B is the width of the ring. Table 1:
Modified it to integrate it into the HSW System. All that is needed is 2 M3 Insert's
This can be used as a spare part for Zanussi refrigerator with holes in the distance 133mm.
I've printed them using supports in the lower part. There is a 1,5 mm cantilever to allow them to be stackable.
angles paint holder for 33mm bottles of paint. It's angled and snug enough so the don't fall out. legs get glued on or use a 3d pen to weld them together. This is heavy duty, so it takes a while to print the honeycomb. Added wall mount…
Simple keyhole hook designed for Bunnings 33mm shelves, will fit 34mm too. Rounded edges designed to cradle headphones a bit better than flat hooks. Print with supports. Step file included.
Modified it to integrate it into the HSW System. All that is needed is 2 M3 Insert's
33mm fork seal driver for forks commonly found on ~70's Honda motorcycles as well as modern smaller bikes. There are two STL's. One is ~25mm taller than the other. The added length is just for extra grip. however it does add more print…
33mm Hex bases for the Lancer TTRPG, have an option for size 1, 2, 3 and 4 mechs. Each base has a pole to help determine height for a physical representation if something is behind a object that would block line of sight. The top of the…
Japan and Asian style inspired stackable box for all kinds of gadgets. Look for my compatible stackable Business Card Box . Try to use the Separator and Organizer I made and recommend. This is one first element on more to come. All…
Simple holder for a 33mm bottle or anything 33mm round.
Replacement feet for small stepladders with a frame of 20.40 mm x 33.40mm and a ground angle of 22°. Print instructions Best printed in non-brittle plastics. PETG is what I used. Printed standing up with a snug support. 0.20mm layer…
Fits the 6mm od tube
I design this 36mm and 33mm key for multiple use. For example to change car oil filters. I printed both with BLL X1C 6 walls , 25% infill and Overture PETG black dried for 15h. It's strong enough! You can use 100% as well and set higher…
Rigid bottle holder for a Micro Scooter, or any 33mm rod. Fits a 1L water bottle with 82mm diameter. The holes are designed to take M3 metal threaded inserts with 6mm depth. 4xM3 screws and inserts are required. Can be printed without…
Initially, I drew a durable and convenient glasses case, but it can be used as a container for small items. Internal case dimensions: diameter 33 mm and length 155 mm. First change I added another version of the body half, making it a…
After using the original Vortex mixer for Army Painter bottles, I decided to design an attachment that will also work for Citadel / 33mm bottles. Found it easier to print with the pin downward and using support
Skadis 33mm inside diameter pill bottle mounts. Single and double. Works very well with Walgreens pill bottles.
A easy extendable hex ruler for 33mm flat to flat hex games to assist in quick measurements for my Lancer TTRPG Games. No special printing instructions, though I found its connections a little loose and I wrapped the male end connectors…
Nobsound NS-01G Pro Amplifier Mount, mod. for plastic shelve (33mm dia pipes) This is a remix of… https://www.thingiverse.com/christhorn/designs just added a mount for the plastic shelves…
Holds 12 spools of thread that are 33mm diamater. Will be designing more sewing and crafting related Gridfinity bins. Organizing the sewing nook in our house with a combination of Gridfinity and Multiboard. Holes are 33.5mm to easily hold…
Customized version of https://www.thingiverse.com/thing:1285949 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=1285949 Instructions Using the following options: od_pipe_1 = 50.1 len_pipe_1 = 30 od_pipe_2…
Japan and Asian style inspired stackable box for all kinds of gadgets. Look for my compatible stackable Business Card Box . Try to use the Separator and Organizer I made and recommend. This is one first element on more to come. All…
I adjusted the heights so that they fit nicely in my Super Cheap Auto tool cabinet.
Ikea Skadis bottle holder 44mm
Zum Anschluss eine Staubsaugers an den Bekannten Zykloabscheider. Fusion360 File enthalten für Anpassungen.
Multiboard holder in hexagonal shape with a 33mm opening and 55m tall overall. Designed as a gluestick holder but works for so much more. Credit to Jonathon at @KeepMaking for the multiboard.
Hello I have re-created a tape cutter for the normal size tape 19x33mm Enjoy =)
Flag Pole Mounting Bracket by RebelTaz This is a simple flag pole mounting bracket for a 33mm diameter pole. Best printed in nylon, PETG or other high temperature filament. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No…
Accessory that fits Flexikoppel flexi leash mounting point. The threads will work but might need some screwing on and off several times to wear off some excessive material. Depends on your printer and filament, but if you have patience…
I love the originals - these are tweaked to fit the hexes slightly better. I also only remixed the bases with numbers...the stickers are a cool idea, but I like printing! (As per request, I added a plain disc.) These are modified…
Taking inspiration from the engineering consoles from the Starfield game I've created a case to house the official Raspberry PI touchscreen case, with space for a raspberry pi to be mounted behind. Model comes with VESA mounting option or…
Japan and Asian style inspired stackable box for all kinds of gadgets. Look for my compatible stackable Business Card Box . Try to use the Separator and Organizer I made and recommend. This is one first element on more to come. All…
Add a touch of charm and practicality to your workspace with this adorable cat paw hook! Designed to clip securely onto the edge of your desk, it provides a convenient way to hang your backpack, headphones, keys, or other everyday…
Fan blower positioned to the left with height and angle adjustments.
Simple throw lever for optics with 33mm ring. Printed in PETG 100% infill. Assembly with M3x20 and M3 nyloc
I've made this model to mount just laser module on custom Z axis modular support made by https://www.printables.com/@GregFRISON ( https://www.printables.com/model/367235-z-axis-modular-support-cnc ) Model with no gap (33mm space) might be…
The base model is made for a 25mm pipe, I've made 2 variations, one for 21mm and one for 33mm pipe.
Customized version of https://www.thingiverse.com/thing:758991 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=758991 Instructions Using the following options: pole_dia = 33 pole_thick = 3 pole_h = 5…
Support-less design. designed for cheap hot air guns that use a 33mm diameter handle. Printing in PLA is fine but be careful not to get the stand hot. I printed it with a 0.4mm nozzle, 4 walls and 15% rectilinear infill
80% infill in PETG worked really well. this model is for a 33mm desk and I can adjust the height to accommodate desk thickness. lay flat on the left side to print
no supports needed, infill 10% (remove built in brim when done)
This model was made using a photo taken from the side. The size is 7.76mm x 32.83mm. Please pay attention to the nozzle size when printing. The wall of the tip cap is very thin and may not print properly.
Model cuts a PTFE tube to exact size of 33mm needed for my awesome Ender 3 Orbiter Mount
Japan and Asian style inspired stackable box for all kinds of gadgets. Look for my compatible stackable Business Card Box . Try to use the Separator and Organizer I made and recommend. This is one first element on more to come. All…
Grille de sol siphon Nicoll 133mm Diamètre intèrieur 109mm Diamètre exterieur 132mm PETG, ASA ou ABS conseillé
A remix of @MP_660455 of the filament sensor relocation piece to give me more space to slide my carbon cartridge.
By putting these little apertures inside the color-filter tray you can reach an enormous increase of contrast. Each lens needs it's own aperture diameter for optimal results so I made a set I recommend to print in black filament and…
Taking inspiration from the engineering consoles from the Starfield game I've created a case to house the official Raspberry PI touchscreen case, with space for a raspberry pi to be mounted behind. This is a revision of my original model…
Probably not useful for very many people. My wife had two sanitizer bottles stacked on top of each other emptying one. So I saw a need. The bottles have 3 different cap sizes 28mm, 33mm and 38mm and lid size varies from batch to batch.…
This wall-mounted Cabinet of Curiosities shelf is designed for displaying fossils, crystals, minerals, small collectibles, and curated objects. The 233mm square footprint makes it ideal for mid-size build plates while maximizing display…
Specifically designed to fit Sunstone Orion Pulse Arc Welder microscope. Use main camera only, 2x zoom to limit vignette. Phone should fit very snug with minimal play, use 2-3 piece of electrical tape on the inside top edge tighten phone…
Fillet Radius Finder (Inner/Outer) - Design Reference Ruler 21 to 27mm, This is a remix of product linked to underneath
Paint bottle holders for big 33mm bottles and Citadel colors or 25mm bottles used by Vallejo, Greenstuffworld and Armypainter. The 25mm one has a tilted variant which is significantly more space efficient. The paintholders are connected…
You can print it without supports by placing the model on the cutout at the bottom. If you press "auto-orient," it should orient itself that way. I also used a brim just in case, since the connector has little surface area on the bed.
This is a GPS mount for the Beitan BN-880, which is my favourite GPS. This mount is designed for the Blade Theory XL drone frame but should work on any frame that has 33mm hole spacing. You might need to scale it in the Z direction. As…
Filament Spool Hub 33mm to 65mm Designed for standard 608 bearing Print Settings Printer: Geeetech Prusa I3 pro B Rafts: No Supports: No Resolution: 0.2 Filament: Standard 1.75mm PLA PLA Category: 3D Printer Accessories
high infill(40%) and many perimeters(4) recommended for rigidity. I put a logo and some writing on it and now it is a prize at a race.
Generic bins for
This is a bar end for bikes and motorbikes with a gas gas logo, it will fit any handle bar with a diameter of 14.33mm is the dimensions of this outside will bend a bit so can fit bit smaller bars aswell.
Description Designed and printed this cable management solution for my Ikea desk plates being 3,3 cm thick. I used a round hole-saw of 6,7cm to create the hole in the desk. The model is at diameter 6,5cm so it should fit easily. Overlay…
This bed slat holder is for 50x9mm slats. Pegs are on 33mm pitch. It's important to print in the STL orientation, otherwise the holder is likely to split on the layer lines. Tree/organic support is recommended as it's easy to remove. 100%…
simple remix to adapt the original 29mm to 33m rail, it just snaps on - big leg hooks over the rail then press in for the little leg to click.
Jacuzzi bottom plug 33mm replacement Hollow and solid versions Print Settings Printer Brand: Flsun Printer: Flsun Q5 **Rafts:** No Supports: Doesn't Matter **Resolution:** 0.15mm Infill: 40% **Filament:** generic PLA or PETG any Category:…
Bought a cheap digital microscope with a steel plate as the work area for SMD soldering. Had a small portable screen with 75mm Vesa mount I was using for work and wanted to mount it on the microscope. f3d file has some parameters you can…
Un support Laser pour CNC 3018 avec axe Z alu. Laser de 33mm Entre axe vis 80mm Juste besoin de 2 Vis M6X15 plate
I made these to rebuild my Kawasaki H1 forks, they should work for any 36mm fork. 6x2 magnetic insert holes allow for press fit, which will keep the soft jaws in place while you work. I used IEMAI PETG CF with Anycubic Kobra S1, .6mm…
I have the Ortur Laser Master 1 with 20W laser module as well as some other 33mm laser modules (500mW, 2.5W, 15W). As the lower power modules give a better resolution because of smaller laser dot I use them with the Ortur as well. They…
Added reinforcements to the High Walled Holder
A simple knob for standard potentiometers. 6.1 mm inner diameter 33 mm outer diameter 10.5 mm height Standard print settings: -No supports -Print on flat side -2 walls -10% infill One I used:…
Brackets to hold a 33mm rod (or any other dimension with changes to included step file). I needed it to fit within a vedum wardrobe that had 5mm in diameter holes and 32mm cc between holes, so I added some pins that can be printed…
Hold 33mm ~ circumference pill bottles so the cats don't knock them off the shelf.
My next project is a 33mm bracket for wall mounting.
30-33mm 90 Degree Extended Pipe Bend - made for coolant pipe reroutes on a mk1 golf rad upgrade. PRINT IN NYLON PA6/CF/12 AS IT NEEDS TO WITHSTAND TEMPS AND PRESSURE ON AUTO APPLICATION.
just more space between holes
Strong bottle holder for Ikea's Skadis peg system. Holds three bottles: 2x of 37 mm diameter (like AK's 100 ml bottles). 1x of 33 mm diameter (like AK's 60 ml bottles). Uses six pegs for better strength. How to print: Print on the side…
Miniature Painting Handle - Screw Cap 33mm
This is a remix of two separate projects. Sisul's excellent Modular Wire Spool Holder MrMasternes 35.5mm remix I needed the wider spool holder, but I was organizing unspooled wire, so I needed a wider spool. Since Sisul included the…
i needed a longer to mount my Ender 5 Max bed in a 520 Redux i gonna use 133mm in the rear...
Simple Adapter for 33mm Laser on an 65mm Mount. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: 0,3 Infill: 20% Category: DIY
Festo 33mm Hose Clip for older Festo Tools. The clips I found in printables are for the the newer one. All my small hoses for my Festo tools have 33mm in the outer diameter. You can print it without brim. The clip is designed with a tight…
model made for citadel bottles or 33mm bottles.
I upgraded my laser to a 30 mm module and needed an adapter for my 3018 cnc
This spanner was originaly designed as a replacement part for a welger hay bailer. The contractet lenght is 33mm and in can be expanded to about 43mm. Further dimensions see attached documents.
