P
PrintablesMrToToRo
Camera mount for ender 5s1 (Creality Nebula)
The fastener is best printed from PETG or ABS, Glue the camera itself to the mount using 2-sided tape.
- Pobrania
- 245
- Polubienia
- 26
- Ocena
- 4
Wyniki wyszukiwania: 5s1
Liczymy pasujące modele…
P
PrintablesDennis Louton
Ender 5S1, Cable Bowden Tube Guide
Simple clip for the Ender5 S1 Bowden Tube that attaches to the hot end cable to support it. I did not like the look of the single clip that comes with the printer. Printed at 0.2mm, 30% infill, Hatchbox PLA. Printed without supports,…
- Pobrania
- 201
- Polubienia
- 18
- Ocena
- 5
P
PrintablesAdrián Mihálko
5S1P 18650 cell holder triangle
5S1P 18650 cell holder (spacer) for recelling an old Makita drill with Ni-MH cells to Li-Ion.
- Pobrania
- 97
- Polubienia
- 10
- Ocena
- 0
P
PrintablesSergey Mizerin
Ender 5, 5Pro, 5Plus, 5S1 Spool Holder for direct drive extruder
I designed this ender 5 spool holder for my Ender 5 with direct drive extruder. It sits in the back by the y-stepper motor and it conveniently slides into the frame so you would only need: 2 screws and 2 t nuts that already came with your…
- Pobrania
- 92
- Polubienia
- 10
- Ocena
- 0
P
PrintablesJEKYLL
isolation feet for ender 5s1
I felt that the ender 5 s1 would benefit from some vibration isolating pads. so I made these, and they simply just go under the factory feet. I have no way of testing but I feel they do help with reducing vibration. I printed with tpu…
- Pobrania
- 85
- Polubienia
- 12
- Ocena
- 0
P
Printablesmarkoblaster
30s1p pack - 2x 15s1p for p45b
make a 30s1p pack for your vesc build
- Pobrania
- 57
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRasul Ismailov
Power bank 100W 21700-5S1P
I decided to assemble my own version of the popular 100W power bank board on Aliexpress. For this, 21700 5000 mAh batteries were used. The assembly is extremely simple, you will need to carefully insert the display without damaging it. I…
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
PrintablesCaspar Geerinck
Pheatus Rapido UHF Bracket for Ender 5S1
Warning! You will need to file a tiny bit out of the sides of your Pheatus where the bolts connect. (I set it up began putting the bolts in so you see where the paint scratches and then used a round mini metal file to take a bit off)…
- Pobrania
- 39
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMasterchief
Bedlock Ender 5S1
Modifikation to stop the Bed from "adjusting itself"
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAdvarine_3D
Holder for Hexagon Scraper - Ender 5s1 clip
I have designed this to simply clip onto a sidebar of an Ender 5 s1. I don't know if this will fit onto any other Creality printers. INSTALLMENT: Print the files Put the clip on a sidebar with the curved part like shown in Step1 in the…
- Pobrania
- 32
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDurden1984
Creality Ender 5S1 USB and Cardslot Protection
Diese Blende verstärkt den USB Adapter, welche auf der rechten Seite des Ender 5S1 eingesteckt wird. Zum Beispiel zum Verbinden eines Sonic Pads. Alle Anschlüsse können weiterhin verwendet werden. Die Blende passt perfekt in die…
- Pobrania
- 30
- Polubienia
- 4
- Ocena
- 0
P
Printablesnaradu
Ender 3/3v2/5/5pro/5s1/5plus Knop
Printer: Creality Ender 5 pro Supports: no Raft: optional Resolution: 0.2 mm
- Pobrania
- 28
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMason
Ender 5s1 LGXPRO with Revo Six hotend
This is to use the LGX PRO and the Creality Revo Six. I have it installed and testing. The LGX PRO is heavier and larger then the stock extruder. I went with the pro for a couple reason 1. it can handle higher temps as I have mine fully…
- Pobrania
- 28
- Polubienia
- 8
- Ocena
- 0
P
PrintablesMason
Ender 5s1 Lgx pro revo six compact tool head
updated tool head for the hoon linear rail mod. upgrade the extruder to the lgxpro and revo. I use this for the ERCF and get perfect swaps. cooling is way better and best of all the rattle from the hoon tool head is gone.. Print should be…
- Pobrania
- 27
- Polubienia
- 3
- Ocena
- 0
P
PrintablesDetson
DIY 100W USB-C Power Bank Case - 5x 18650 (5S1P), MYZL-YD24 board
I built my own 100 W power bank around the popular MYZL-YD24-V2.32 board ("100W 5S Flash Charge Mobile Power Circuit Board") and designed this case for it. The case is only 97 × 23 mm in footprint: five 18650 cells stand side by side in a…
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
Printablessas
Adapter 3.5 Kedei LCD chip screen for Ender 5s1
Adapter for HDMI 3.5 Kedei LCD chip screen for Creality Ender 5s1 and Klipper (KlipperScreeen)
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
PrintablesMason
Phaetus BMS Hotend ender 5s1 hotend linear rail mod
Phaetus BMS Hotend ender 5s1 hotend for the linear rail mod. I havent tested this, this was a request and is being tested.
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
PrintablesCADjockey
Camera Mount - Creality E5S1
A fairly simple mount for a timelapse camera [Brinno in my case from another project] to attach to the vertical legs of my Ender 5 S1. It clips into the groove of the aluminium extrusion, and can be additionally secured with cable tie in…
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChris Kiggins
Ender5S1 TPU Wire Stalk
This is a flexible wire harness support for the Ender5S1 made by Creality. I was not a fan of the way the wire harness was getting crushed during the homing process, or how it would drag on the build plate for certain prints. I designed…
- Pobrania
- 11
- Polubienia
- 3
- Ocena
- 0
P
Printables
Power bank 100W 21700-5S1P
I decided to assemble my own version of the popular 100W power bank board on Aliexpress. For this, 21700 5000 mAh batteries were used. The assembly is extremely simple, you will need to carefully insert the display without damaging it. I…
P
Printables
Ender 5s1 LGXPRO with Revo Six hotend
This is to use the LGX PRO and the Creality Revo Six. I have it installed and testing. The LGX PRO is heavier and larger then the stock extruder. I went with the pro for a couple reason 1. it can handle higher temps as I have mine fully…
P
Printables
Ender 5s1 Lgx pro revo six compact tool head
updated tool head for the hoon linear rail mod. upgrade the extruder to the lgxpro and revo. I use this for the ERCF and get perfect swaps. cooling is way better and best of all the rattle from the hoon tool head is gone.. Print should be…
P
Printables
Ender 5S1 camera mount
This is the camera that I used. https://www.aliexpress.com/item/1005005217992356.html?spm=a2g0o.order_list.order_list_main.295.a8771802vwyZsV
P
Printables
Ender 5S1 Filament Cutter
This mod upgrades the Ender 5S1 Sprite Extruder with an integrated filament cutter, enabling clean filament removal without complex tip tuning. It’s a simple mechanical solution that improves the reliability of filament unloading and…
P
Printables
Ender 5S1 Enclosure
The files provided are for the side panels and the front door assembly. To assemble the sides and door, you will need: 3x Acrylic/Plexiglass panels (Left, Right, and Rear) - Suggested: 4mm thickness . 1x Front Acrylic panel for the door.…
P
Printables
Ender 5s1 Light Bar
The Ender 5s1 Light Bar is an innovative accessory designed for the Ender 5s1 3D printer, enhancing its functionality and usability. This light bar is specifically engineered to be effortlessly mounted onto the 2020 aluminium extrusion…
P
Printables
Ender 5S1 Ender Logo
This model can be slid into any bar of an Ender 5 S1. I am not sure if it can fit onto any other printer. These pieces can be printed separately by cutting them up in a modeling software or can be printed as one piece with supports. A…
P
Printables
Modification of the Ender 5s1 head, lighter with orbiter 2
This modification allows you to significantly lighten the head on your printer and at the same time install a better orbit v2 extruder. I have already fully tested the modification and I can say with confidence that the printer has become…
P
Printables
Ender 5s1 Ender 5 plus Tool holder
New features of the V2 tool holder: Relocated spatula to the side Shifted smaller wrench slot USB holder now includes
P
Printables
Ender 5S1 camera mount
This is the camera that I used. https://www.aliexpress.com/item/1005005217992356.html?spm=a2g0o.order_list.order_list_main.295.a8771802vwyZsV
P
Printables
ENDER 5S1 Ventilation Grid
If you have already installed Klipper, you can replace your non-functioning screen with this ventilation grid. This grid can be mounted using the screen screws. You must print it with some supports. In my case, I used a 0.16 layer…
