Liczymy pasujące modele…
Requires: 2x din rail clip: https://www.printables.com/model/161740-din-rail-clip 8x DIN 912 M3x10 8x DIN 934 M3
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
---------------- the parts list and the documentation to get started can be found here the link to the new manuals can be found here https://drive.google.com/drive/folders/1cR-nfubPEXCrr6-0PsUFC_jSHIq18V4U?usp=sharing ---------------…
So, what's this then? If you do any kind of photogrammetry, markers are great for ensuring that the software ‘recognizes’ what areas are shared between images. While scale markers make it far easier to lock said scans to the correct…
Fiat 1216HP year 1902 Ondersteunt: Ja Resolutie: Dynamisch Invulling: 50% lijn Filament merk: 195 -200 Filament materiaal: PLA
Simply camera holder. This one is for HBVCAM-F20216HD, but you can mount it to anything with 2 holes 10mm apart. BOM 2 M3 hammerhead nuts + 2 M3 8mm BHCS for fastening 2 M3 10mm BHCS + 2 M3 nuts for joint 2 M3 6mm BHCS + 2 M3 nuts for…
I designed this so my scanner could stand up on my desk without fear of it crashing about. I added some rubber feet to the bottom for great traction. It's tippy if you try pressing buttons but you can press one finger on the stand below…
There are some other feet for Lenovo Legion notebooks on Printables, but they didn't fit my model, so I just designed my own. Only one model included - for the other side just mirror it in PrusaSlicer. I'm just sharing it here in case…
2-11-2025 BL SF bolts have been updated to work with the new stronger disconnect that also makes it possible to do reloads when the bolt rest against the disconnect all the files have been moved to zip files! ---------- 15-10 2025 3DN-SF…
I designed this cup holder mount for my Chevy Bolt so I can listen to my Uniden BCD436HP scanner while driving. It cants the radio at an angle and the plug is a nice snug fit in the cup holder. The Bolt's cup holder is 81mm (3 3/16")…
Mounts the Duet 3 6HC and 3HC to the printed DIN rail clamp as used in Voron 3D printers
Hello. DISCLAIMER: This is one of my first projects when I was trying to learn fusion 360/ CAD by my own. Contains errors, and can be better, but I think now It's sufficent to be released and other users can use it :) , I learned a lot…
This is a Caribou Duet case for Duet 3 6HC and Raspberry Addon
3D printable and re-usable durable April Tags for FIRST Teams. These were tested and found to produce identical results to the ones on field in 23-24. “Full Size” are 266.7mm x 266.7mm which we print on a Prusa XL very nicely. “Prusa MKx…
This is a 100mm x 100mm VESA mount adapter for an Acer H236HL. It should work for any acer monitor with a metal mount shaped the same as mine (see pictures). You have to re-use the metal part of the stand that comes with the monitor. I…
These are two versions of a hard case for the R36H. You can glue 8x3 mm magnets inside. You can modify the original Blender file for a better fit or a different design. The hinge can be fixed in place with a 1.75 mm filament piece. As a…
Added vent holes to Heiliger_Bimbam's design.
Quick and dirty remix to make a ATGM336H GPS antenna fit also. I've added a spacing of 20.6 by 6 by 6 mm extra in the top. https://www.tinytronics.nl/en/communication-and-signals/wireless/gps/modules/atgm336h-gps-module
My in-law's Lay-Z-Spa A coupling broke through over-tightening (the one that connects the inflator part of the pump to the tub) so instead of paying the inflated(!) prices I'm seeing for spare parts at the moment due to the pandemic, I…
This is a replica of the miniature H from the Ral Partha set "Dungeon Party" #98-006 from the Adventurers series. (see http://www.miniatures-workshop.com/lostminiswiki/index.php?title=Image:RP-98-006h.jpg&oldid=183849 ) "Cleric"…
Started getting these cramps after retro gaming sessions on the R36H. So I designed this grip for more ergonomic use. Prints OK without supports. Use organic supports if you mind some minor drooping. I printed mine in PLA with 0.3 mm…
Here is a simple mounting rig for the Duet 3 6HC main board and a Raspberry Pi 3B or 4B SBC for testing printer builds or to assist with RRF3 firmware / application development. The fan mount will fit any 40x40x10mm blower fan. Most fans…
A simple spacer kit for Cisco Meraki MR36H access points. Made as 4 models; regular and slim, with and without a hole for uplink cable 25mm with hole for cable 25mm without hole for uplink cable 15mm (slim) with hole for cable 15mm (slim)…
Adjusted a grip model I liked from a similar device and made it to fit mine!
the BIG 2024 project update status: complete the parts list can be found here https://drive.google.com/drive/folders/1XBZvTm_s3VLk_iqTnINIyMt30BXmXn8h ------------------------------ Barrel / UNW hop up unit will be updated Bolts will be…
Upate 2024-10-13: Replaced stl with 3mf Added an additional V2 with holes for improved gluing Updated images accordingly A minimalist servo frame for the X06H servo from KST. The frame is glued directly into the wing and the servo is then…
Fujifilm x100vi shadowbox 4Lx2Wx6H Space is optimized so two batteries can also be included Model sits snug, use the eyelets to pull it out if it is too snug, it does not wiggle much. Model stops below the eyelets so you can leave a strap…
Board mount for Duet 3 6HC and Tool Distribution Board Mounts for E3D ToolChanger. Uses M3 heat set inserts for mounting electronics to the adapter and the adapter to the ToolChanger.
EDIT 01/05/2023 DISCONTINUED PROJECT I'm doing à more complex enclosure with intagrated PSU and SSR Enclosure with 2 fans (120X15) for Duet 3 6HC + raspberry pi3 or pi4 + PWM to Analog converter. Need to thread M3 and M4 for boards…
If you want to mount a Duet 3D 6HC to the Voron din rail clips this is the mount You will need 4 m4x8 or m4x10 both will fit
This is a bandsaw table insert for the Laguna 16HD (probably will fit other models up to LT 37). It has a little wider opening around the blade to hopefully minimize the cutting of the block. I'm using this on a ½ blade and it works great…
I modified the great design by Narasak Mansurang to mount the enclosure to 2020 and 2040 extrusion profiles.
I bought a buck converter to go from 24V to 12V for quiter fans. I looked for a case here, but didn't find fitting ones. Didn't searched that long though. To get a little bit more into designing things I made my own housing. My buck…
A simple yet study overhead mount for the AI Prime 16HD Reef light. You will need an M5 bolt for the light itself and the hole on top is sized for an M6 bolt. Feel free to try it out and give any recommendations on improvements. Printed…
All parts printed in 0,2mm layer height PLA (PETG) Prusa speed setting with slightly increased several values that reduced printing time. See attached G-codes. Všetky diely som tlačil vo výške vrstvy 0,2mm pomocou PLA (PETG) na…
I needed a case for the ONPIRA power distributor W2x6H. The case is held close by the mounting screws - M2,5x30 - and can optionally be fitted with a piece of clear filament (PETG or PLA, 1,75mm) as a light guide for the Power LED. Just…
I “jerry-rigged” 4 monitors to a TV wall mount but couldn't get the monitors to lineup just right. So to satisfy my OCD I created a tiny clip to hold the monitors just-so and just large enough to not block the LCD any. 🤓 Works great and…
Had this monitor laying around and decided to create a vertical stand for it. Since the back of the monitor is curved at the bottom i created two pieces for the best fit. Since it doesnt have a vesa mount, it wouldnt fit with vesa stands…
Please also see related design for source of din rail clips, standoffs, finishing washers, fasteners and other supporting files: https://www.printables.com/model/320549-din-rail-duet-1hcl-expansion-board-mounts
This is my design for the EVA toolhead. This allows the Orbiter, the Magnum, Mosquito or whatever hotend you want. This mod is specifically made for the use of the Duet 1LC tool board for use with the 6HC Duet 3.
as part of the big V24 update. the 14mmccw barrels have been made a bit stronger - this is a special barrel design made to for the stock barrel retainer or those with a added hand stop. but this will give a cleaner look than the other…
This is a mount for the Duet 3 6HC using the sturdier metal DIN mount. Metal "SSR" DIN Rail Clips (35mm) can be found here: AliExpress AliExpress (Alt)
A protective box to carry the NGK CMR6H spark plug for STIHL Chainsaws as spare part with you. Other spark plugs with the same dimensions and for other STIHL garden tools will fit also. Features: Embossed text 'Spark Plug STIHL ' around…
this is my longest print ever. My printer works only by 10mm/s. I am not able to print faster as 10mm/s. I would like to print more Covid Masks. But it takes a long time for only this two pices.
The method of connecting the nested wire elements to the antenna spreaders is poor, so I designed these alternative hangers. One for each corner of each element.
I designed a simple joystick replacement compatible with the little sticks on the Anbernic RG406V, RG406H, RG476H and RG477M Android retro gaming handhelds. They are lower profile than the other models for these handhelds, and I beefed up…
This is a travel case for the Anbernic RG476H. I didn't see anything for my handheld so I decided to make one for myself. The top half is designed to hold the included foam pad that comes with the console, and the hinges are put together…
This model adapts the mounting pattern of the Duet 2 board to the Duet 3 6HC pattern
Just removed a layer in fusion
Camshaft ring seal gasket installation tool 1.6 HDI , DV6 , DV6TED4. The tool helps to insert the ring seal gasket evenly without danger of displacement during installation
AI Prime 16HD Mount Attach to aluminum extrusion. PETG because its reef safe.
Gridfinity Shadowbox for the Fujifilm 50-140mm f/2.8 R Lm OIS WR. Cutout has been included on both sides so you can flip the lens around to store it with the collar foot. Assumes you are using the lens hood Stepped so it sits snugger due…
6H5 bayonet with working latch mechanism. In this state this particular model is fitted for my 3d-printed AN-94, so the inner diameter of the ring is smaller and the dimensions of the grooves around the latch are a bit different (we are…
The flip hinge on my parents skillet broke and my dad asked if I could make a new one. This was printed in ASA and since it was mainly all on outside, I don't think there will be an issue.
A 6 HP eurorack front panel with holes for 4 potentiometers and 4 jacks.
Ein Standfuß für den Monitor Acer GN246HL. Er ist 23mm hoch und hat eine leichte Neigung von ca. 3°. Er ist an den Fuß angepasst und dient zur Erhöhung um auf die Höhe eines anderen Monitors zu sein. Er wurde liegend gedruckt mit weißem…
A custom shelf Made for a ZACA 26H 16W medicine cabinet. The holes in the part are slightly misaligned compared to the real shelves, but still cosmetically good.
This is a Duet3D 6HC Mount for my DIN Rail Bracket. You can find the bracket here ! In addition I created a fan mount. The fan mount can be used without the rail mount. The fan mount is for 40mm fans. The printable spacer can be edited to…
Made up some basic intake and exhaust covers for my Briggs and Stratton 326431 16hp engine, while I was working on it forgot to take pictures of them on the engine. may suit other variants of the 326400 family nothing fancy, but if the…
This is a slim mounting bracket for a Duet 3 6hc board in combination with a Raspberry Pi 4B or any other SBC for that matter which has the same mounting hole dimensions. There are two versions. The standard Version and one with a little…
Print in ABS or ASA, ducting is printed standing up, with supports to hold up the FC mounted part. Be careful when sliding it on so you don't knock any surface mount components off. Specifically the small capacitors near the stepper…
Had a lot of cables and Webcam, which I could not mount on the LCD. So I made the hook for cables and a small platform for Webcamera. Also added Freecad model just in case someone want a remix.
I designed this holder to attache my remote to the Head-End of my Ikea Malm bed. I've printed this without any supports oriented as the file is without any issues. Category: Gadgets
The status light is still visible through the hole. Printed in PLA 0.2mm layer height 50% infill No supports needed
Duet3D 6HC electronics case for Prusa/Pulse D-frame printers. Can be used with or without the large heat sink. [Update 01042025] I have updated the base so that it misses the lower D frame brace on the Pulse XE Designed by myself and…
A 6 HP eurorack front panel with holes for 2 potentiometers and 6 jacks.
Duet 3D 6HC Mainboard 120mm Fan Mount, simple top mount using screw standoffs. The stepper driver heat sinks are on the back side of the board, however the pcb board does absorb some of the heat and will cool from the front as well as the…
This profile is comparable with PolylLight 1.0 LW-PLA Active Foaming on the Prusa Mrk4S tested with Slicer 2.9.2 Filament is dried before usage on recommended manufacturer settings. Stringy inside perimeters are common with active foam…
The Convair NB-36H was an experimental aircraft that carried a nuclear reactor to test its protective radiation shielding for the crew, but did not use it to power the aircraft. Nicknamed "The Crusader", it was created for the Aircraft…
Most common one i am using. As you can see in photos it is good in vertical an horizontal position.
Ai Prime 16HD Brick Mount Print Settings Printer: Neptune 2S Rafts: Doesn't Matter Supports: Yes Resolution: .2 Infill: 35 Filament brand: Generic Filament material: PETG
Quick HFS-DC06H footprint Category: Electronics
Holder for broken notebook hinge model Acer D16H1. Make connection using threaded rods 6mm. Category: Tablet
Duet3D 6HC enclosure for Prusa/Pulse MK3S+ XE No frills minimal enclosure to fit the 6HC onto the MK3S+ Please leave a “Like” Thank you for downloading.
Description: I designed this 3D model of the R36S handheld console using basic, rudimentary tools. I do not own a 3D scanner or even a digital caliper, so the measurements were taken by eye and standard ruler. In theory, this model should…
Častokrát mám na stole nejaké papiere a veľmi nerád ich prekladám len preto, že potrebujem zošívačku alebo niečo podobné zo spodných suflíkov. Tento diel vyvýši jednotlivé bunky o 15mm čo vo vačšine prípadov bohato postačuje.
Story behind the design: During the past Children's Day, my students accidentally damaged the top and side buttons of my console. Instead of giving up on the device, I decided to design a permanent hardware solution to reinforce and…
I made this model to cool my 6HC mainboard with a 120 mm fan. The spacers are needed 4 times, I fixed them with countersunk screws M4 x 50 . The fan can be attached to the frame with the screws usually supplied. I glued 4 magnets 8 x 3 mm…
This is a remixed and complete mounting kit for the HBVCAM-F2216HD V22 camera , designed specifically for the Ender 3 V3 SE . It is based on the original Ender 3 V3 SE Camera Mount , but fully adapted for this specific camera model. 🔹…
Duet3D 6HC electronics case for Prusa/Pulse D-frame printers. Case mount allows the use of the large 6HC and the original D frame mount holes. This version uses a 120mm thin fan underneath the main board to cool the steppers. I am…
Two versions provided. The first was a bit hard to put on. So I provided a slightly scaled version.
My ATGM336H gps module had a slightly larger antenna, no I had to modify the front part. I have also a big preferences on brass inserts, so I modified that also. A Big thanks to Brian Flores and Alley Cat's
I needed a small raft to print it.
stand for 66 earnings suitable for drawer of orgenizer which can be found in https://www.printables.com/model/7643-various-size-stackable-resistor-storage-box/files
Toto je ľavá bočnica pre AB6H modulárny systém, ktorý som navrhol. Pozostáva z bočnice a predného panelu. Bočnicu som si navrhol tak aby bola rovnakej dĺžky ako samotná bunka samozrejme pripájam niekoľ Osobne tlačím jednotlivé bunky dĺžky…
Photos and description later.
Halo 5 Magnum (M6H2) body kit for the AAP-01 GBB airsoft pistol. Parts: Back, Front Top, Front Bottom, Magwell. Hardware: M3 screws to lock the parts down / pin them to the Picatinny rail, plus one M3x20 screw to connect the Front to the…
Součástky k čerpadlu gre matice a základna čerpadla
Glucose is the sugar your cells burn for energy, drawn here as the alpha-D-glucose ring. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol…
I wanted to print buttons for my handheld and I couldn't find ones specific made for mine so I made them. There are ones made for resin and ones optimized for fdm printing.
I hated the default TPU pad on my R36H; it didn't match the rest of the console's body, so I decided to make one that would maintain its functionality without obstructing the view of the transparent body.
Ovládací hřibová hlavice T6H pro tlačítka elektropřístroj Písek
A custom protective case designed specifically for the R36H handheld gaming console. Intended to be printed with flexible filament (TPU), this case provides reliable protection against minor drops, scratches, and wear while significantly…
microMAX Electra sansibear servohalterung KST X06H
Simple Suzuki / Johnson outboard hood latch. Should fit all Suzuki DF4, DF5 and DF6 four stroke outboard motors from 2002 onwards and Johnson four stroke outboards 4, 5 and 6 hp from 2003 to 2007 (Not completely sure about this) OEM…
Benzene is the aromatic ring: six carbons in a hexagon with alternating bonds shown as twin sticks. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its…
Hexane is the six-carbon straight-chain alkane found in gasoline and used as a solvent. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol…
Cyclohexane is a six-carbon ring in the puckered chair conformation. A labeled ball-and-stick 3D model for classrooms, teachers and chemistry fans. Every atom is a sphere in standard CPK colors with its element symbol plus proton and…
Made this while trying to find a stand to put my RG476H while its hooked up to my TV. It has enough room for a right angle USB-c cable in the V2 and V3 models, the V1 has a completely uncovered cable area as well as an unaligned fan…
Cyclohexanone (C6H10O, CAS 108-94-1) — a free educational 3D molecular model for teachers and students, by MolGod.org. Every atom carries its engraved element symbol, so no colour key is needed. Most printable molecule files rely on…
