44 modeli
Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV. PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household…
Wydruk około 3,23 €–3,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Needed a mounting bracket for a friends car mobile radio so made in onshape. M4 screws for everything I printed in PetG, Polymake PolyLite. Print it on its face.
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
We created a differential swerve drive for our 2022-23 Power Play robot. This is the pod design we created for our robot. The differential swerve pod was designed to be mounted to a drivetrain using 40mm needle bearings and a 1/4" Hex Cap…
Adapts DWS779 miter saw dust port to a 2.5" shop vac Prints ok without supports. The fit on the saw is a tight friction fit to keep it on without any extra support. May also fit other dewalt saws with 42mm outer diameter dust port
Here is the CAD of the drivetrain that we used during the FIRST Tech Challenge 2022-23 Power Play season. It is a four pod differential swerve drive that utilizes swerve pods that we designed and released here:…
Created in Autodesk Maya as my scanner does not work on smaller than 100mm*100mm*100mm
Stanley FatMax FMST1-75779 Shallow Organizer Dividers for the large and small bins I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Included is the f3d file A lid exists, to prevent small washers to move to another bin.…
This is a M36 threaded bolt. You can scale it to the size you need: 133,3% – M48 116,7% – M42 100% – M36 83,3% – M30 66,7% – M24 55,6% – M20 44,4% – M16
I could not find a hose connector on this site for a specific Shop-Vac hose size and Dewalt Miter Saw Dust collector, so I made one! First model, lets GO! I have the shop-vac hose of 1-7/8" inner dimension at 1.76" for a little more space…
I needed an accurate model of this display for designing a 3D printed enclosure for it. This is only a model of the TFT display. Download includes: .f3d, .step, .stl Edit: 2024-03-05 Due to an incorrect measurement the pin and mounting…
This model is compatible with the lego system.
Stanley FatMax FMST1-75779 Shallow Organizer Lid for the small bins This lid exists, to prevent small washers to move to another bin. I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Print with the top of the lid on the…
This is a commonly broken part in many Pioneer Laserdisc players. I modeled it close to the original but modified the design to accept metal shafts for the gears to ride on. The smaller top gear uses a 2mm shaft and the larger bottom gear…
The front and rear are held together with 10mm x 3mm round magnets. There are cutout slots on each corner to insert the magnets then back-fill with filament from a 3D pen or soldering iron. The holes on the bottom of the case are for…
I scanned an rs6 bumper deflector and i printed it. it's not 100% the same as original and may require some work but it prints out. I own a prusa mk3s+ but the software did not see the scan so i printed with Bambu Lab. In the second…
In reason that my kitchen roll holder ( https://www.printables.com/de/model/258984-openscad-kitchen-roll-holder ) makes me still happy, i create this peace to mount the kitchen scale under the kitchen cabinet, too. Screws 6x DIN 7981…
Connects a shop vac hose to a miter saw dust port. Most likely will fit many other tools like belt sanders, planers, etc
I really like the design from evancli for RPi4 with HDMI CSI Card. I make the slot bigger to fit CSI to HDMI bridge card for Pi-KVM. I also remove the top OLED mount because it will not fit with the larger C779 module. Update 4/6/2021:…
So maybe you are also trying to get into the multi-gig game with working ASPM (looking at you realtek!) and found these cheap things whilst trying to avoid the influx of fake/cheap/old/buggy i225 & i226 NICs available these days yet…
This model is compatible with the lego system.
Osłona czujnika ABS (454779) do Peugeot 206, której w tej chwili nie ma zamienników i pozostaje tylko serwis, oczywiście o ile jest w ogóle dostępna + Do wytoczenia w dwóch wersjach model śruby mocującej czujnik ABS oraz tę osłonę o nr…
zero tolerance insert for the dws779
Ersatzteil / Spare Part für einen Akku-Rasenmäher der Firma Worx / Pattfield Original Kunststoff PA66 - GF50 Nur hochfeste Kunststoffe zum Drucken verwenden; solider Druck.
Our collector has several interesting components in it. The first is the fish-tail style grabbers. They are intended to be printed out of TPU and they allow the claws to bend around the cones. Another interesting part is the Geneva drive…
Playmobil Delorian Mirror - 6779711
You'll need 2X inner and 2X outer pieces. Note the inner pieces are NOT the same. One (0.1) is slightly larger. Tested with ABS with 0.4mm nozzle and 0.2mm layer height, worked fine but needed tangs. Finalized with PETG 0.6mm nozzle and…
Bisley hanging file cabinet bracket for 5x Stanley FatMax FMST1-75779 Shallow Organizer I removed the metal hanging file brackets from the drawer. I printed this model 4 times, per drawer, in ABS and mounted using double sided tape…
Display your Jurassic park jeep wrangler on the wall! No supports needed when oriented with the large holes down.
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
Badger IR Water Meter Alignment Tool Part #68779-001 Includes STL and DesignSpark Mechanical File Category: Tools
I wake up very early and immediately want to drink coffee, but when the coffee machine grinds beans, it roars throughout the entire neighborhood, this is especially audible in the morning. at the same time, vibrations go from it to the…
Printing instructions Printed without support, biggest side down with ironing for the best finish on the visible side. I had great result with 0.4mm nozzle. Assembly To install the button replacement, first remove the two TORX TR10 screws…
4F9867799 clip Audi A6 C6 4F
Friend.Tech 3D printable fan art merch designed and printed by by sonyx.eth : linktr.ee/3esign // https://friend.tech/sonyxeth // https://www.friend.tech/clubs/177915 // https://www.friend.tech/clubs/171788 //…
irwin countersink set 1/4" 3/8" 1/2" 5/8" 3/4" bits There is only a little play from the cap to the bits, so they don't clank around inside. The only bad part is this is to tall to fix in a toolbox.
Description This is a replacement for the handles of the Clas Ohlson kake carrier 44-4779. These handles easily brake and usually cannot be replaced - unless you have a 3d printer, of course. It's worth considering printing this in PETG…
Hier meine Version für einen Kabelhaken für die Führungsrohre eines WORX Akku Rasenmähers! Passt perfetk für den WORX Akku Rasenmäher WG779E.1
HW modifications: Cut-off 5V traces 1) first between the temp sensor connector and the LED connector on the main board and solder 3.3V wire 2) Cut-off 5V trace (just under yellow wire) and replace it with 3.3V wire on the HMI board In…
Bouton de remplacement imprimable en 3D pour la lampe de poche / lampe d’inspection FACOM modèle 779.PC G. Ce modèle a été conçu pour remplacer le bouton d’origine. Les support ne sont pas nécessaire == English == 3D printable replacement…
Bei vielen Bosch-Staubsaugern der Relaxx'x- und GS-50-Baureihen reißt der flexible Saugschlauch direkt hinter dem frei drehbaren Gelenk des Handstücks ab. Dadurch wird häufig der komplette Saugschlauch unbrauchbar, obwohl der eigentliche…
Designed it for my own when one got broken instead of buying a new one, worked fine. Might need a little bit sanding and possibly some paint or grease on the contact surface if you want a perfect slide upon using the horn. Otherwise it…
You'll need 2X inner and 2X outer pieces. Note the inner pieces are NOT the same. One (0.1) is slightly larger. Tested with ABS with 0.4mm nozzle and 0.2mm layer height, worked fine but needed tangs. Finalized with PETG 0.6mm nozzle and…
Remix of https://www.thingiverse.com/thing:2439779. Left hand Grip for RB 67 Remixed to work with the larger and heaver RB67. Printed in PETG CF with 6 walls and 50% cubic infill
https://www.patreon.com/posts/46819877
