Liczymy pasujące modele…
This adapter is for flash light pewered with 3 pcs of AAA batteries. These torches are cheap and quite common, but problematic and not economical to power. You need three batteries, but they sels in packs of four. If you replace primary…
If you print this feet please print in the downloaded orientation and use support. Its made for a Hailo 8500 ladder. I don´t know if it fits to an other ladder. Feel free to try out. Print Settings Printer Brand: Prusa Printer: i3 MK3…
I needed a bracket to securely hold a 18500 battery for a recent project. In that case the bracket was merged into the body of the container lid. But I realized the bracket itself might be handy for others, so I added flush mount M2 screw…
These two holder designs allow either 2x 18500 LiPo cells, or 2x 18650 LiPo cells, to be charged in parallel by connecting it to your existing LiPo charger with an XT-60 cable. You need to use an actual charger with this holder, not just…
This is a shock mount for the Behringer XM8500 dynamic microphone. It's designed for use with the stand adapter included with the XM8500. It works great to isolate the mic from stand and desk vibrations - it really helps with stand…
18500 Battery holder with contacts (nickle stips). Just pull them trough the two slots.
This is a broadcast-style conversion kit for the XM8500, designed to mimic the aesthetic of the Shure SM7B. The model was developed in Fusion 360 using precise caliper measurements of the XM8500. While the internal dimensions are…
3S Battery holder The holder is designed for batteries with a diameter of 18mm (18650, 18500, 18350 etc) To make it you need: print 2pcs of model long screw M3 - 1pcs screw M3x6mm - 6pcs nut M3 - 7pcs cable connector - 6pcs (optional)…
Replacement lid for Pyrex glass oval bowl with optional vent lid. Material: TPU Layer: 0.2 Sliced with Cura 5.5 exclusive slicing tolerance @ 101%Scale
Makes it so your controller can accept 18500's (like the 18650 but shorter) so it will fit into an Xbox One controller. Use a little bit of aluminum foil to bridge between the spot where the other battery is supposed to be.
Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…
4S1P/2S2P 18500 Li-Ion Battery Case Cutouts on the terminals are designed for “Keystone Cylindrical Battery Contacts” Mfr. No.: 5212 (Keystone Cylindrical Battery Contacts, Clips, Holders & Springs POS BUTTON CNT A/AA) Mfr. No.: 5202…
Printing This model prints without supports. The tolerances are pretty tight but nothing that should be a problem for a moderately tuned printer. Due to some small details I only printed with 0.2mm layer height. I recommend using 2 walls…
Simple battery holders with lid holds a single 18350, 500 and 650 battery. Minimal size but ensures the battery is protected and kept away from possible shorts in pockets and rolling around in the bottom of bags Category: Other
2S1P 18500 Li-Ion Battery Case Cutouts on the terminals are designed for “Keystone Cylindrical Battery Contacts” Mfr.: 5212 (Keystone Cylindrical Battery Contacts, Clips, Holders & Springs POS BUTTON CNT A/AA) Mfr.: 5202 (Keystone…
Print vertically, no supports needed.
Converts a flashlight that uses either 3x AAA sized batteries or 1x18500 for use with standard 18650 lithium ion cells. Use a nickel strip for the electrical connection (small cable should also work). The Fusion 360 file has parameters,…
A case for 2x 18500 Li-Ion batteries with slots where an optional metal strip can be inserted to connect the terminals to either create 2P or 2S configuration - or without any connection, the batteries can be used individually. Since I…
We had to replace a stove knob. This is a remix from the one from millerontap, which was very close to what I needed but not exactly right for my WCG55US0HS cooktop. The knob I'm trying to replace has a W10850010 stamped on the bottom.…
Spacing ring for flashlight conversion from 3xAAA to 18650,18500,18490 Li-ion battery. Print in Spiral Vase mode, No Top/Buttom layer. How to: https://www.youtube.com/watch?v=wGkg4x7K6Rw Print Settings Printer Brand: Anet Printer: A8…
My flashlight uses three AAA batteries and I wanted to replace them with a single 18500 lithium battery so I needed an adapter because the battery diameter was smaller than the flashlight tube. The cylinder I have made has 23mm external…
I really like the original version and have now adapted it for 18500 batteries. Requires 4x M3x16mm screws and heat threaded inserts. Print two copies, drill out the thin layer in the screw holes, and bolt together. These batteries are…
I needed a gasket for my original oil fill cap for my Datsun 620. The original part number 15270-78500 is now discontinued, so I looked at a picture and took some measurements, then made my own. My part number here is 15270-78501 to…
This charger can be used with TP4056
Ink storage for Epson printer, bottom shaped to keep the bottles straight
This design allows you to mount your SWA-8500s wireless module on your wall using just 2 standard drywall screws.
Print the holder for the speaker normal and mirrored. Screw it to the wall and put the modules in. Ready. ;)
Designed for use with 18 mm M3 screws. The model is fully parametric, so dimensions can be easily adjusted in the Fusion 360 files to fit different hardware.
Simple battery holders for Li-ION or LiFePO4 cells with place for a BMS-board. Versions for 18650, 18700 and 18500 cells. The 18700 version I made for a "18650 protected cell" I bought which would not fit in standard 18650-holders because…
The WHY2025 badge had holders for unprotected 18650 cells. I'd rather have protected cells in mine, so I made this adapter to make a protected 18500 battery fit in the holder. Use at your own risk. Each adapter requires either a…
Li-ion /LifePo4 safety warning For use with “ protected ” cells only. Unprotected cells can be discharged too much making them hazardous when re-charged. Some flashlights are sealed tubes with o-rings at each end. In the worst-case…
I have an Epson ET-8500 photo printer. Unfortunatly I noticed that there are some feed problems with the photo paper. This little insert should solve this problem. I've printed it with PETG for extra strenght.
Well, I bought new bed fans and didn't look closely at the listing. I got the "new" GDSTIME 5015 fans with 8500rpm. They have a different, bigger air outlet and makes them incompatible with the existing "The Filter" variants. The listing…
Modified kone's model to have the two adaptors joined together, should be harder to lose and more sturdy in the charger. Category: Electronics
First off, this is an imperfect replacement for the original case. The case for my Passport 8500 X50 was cracking and literally falling apart, so I did a rough design of a new case. This is one of the best radar detectors I've ever had…
Bushing-type adapter to make the cheap no-name "spider" shock mount (mine has a diameter of approx. 45mm) tightly hold a Shure SM58 shaped mic like the Behringer XM8500. Designed in Dune3D , d3ddoc source attached in the zip. Print with…
The goal of this headbasket replacement is to physically reduce the XM8500 's proximity effect, without doing an SM7B imitation build. The windsock this build uses is the Thomann WS NT1 with a straight internal diameter of 40 mm and depth…
A big truck that I would like Ram to manufacture. A semi concept. Has rolling wheels.
Apple TV Halter Philips Ambilight TV 8500 Series Apple TV 4K ab 2022 für Philips Ambilight TV 8500 Series (8500 / 8510 / 8550 / 8560) zum einschrauben in den Standfußeinsatz (43" / 50" / 55" / 65") mit den Original Schrauben (M4xL18).…
Mine broke so I designed a new one. I attached the sldprt in case you need to make changes. I printed with PETG 4 walls and 15% infill. In the picture it looks a lot larger, I've changed it to be a bit smaller.
The goal of this headbasket replacement is to physically reduce the XM8500 's proximity effect, without doing an SM7B imitation build. The windsock this build uses is the Thomann WS NT1 with a straight internal diameter of 40 mm and depth…
Havis console mounting Motorola APX-8500 Mobile Remote Head Mount UPDATED POST size requested per @SeanOConnor_5174100 I modified the 3" deep version to 2.5". I have not printed it, but it should work fine. The 2.5" version is named with…
3S Battery holder The holder is designed for batteries with a diameter of 18mm (18650, 18500, 18350 etc) To make it you need: print 2pcs of model long screw M3 - 1pcs screw M3x6mm - 6pcs nut M3 - 7pcs cable connector - 6pcs (optional)…
