Liczymy pasujące modele…
Dyson Mini Turbo 967479-01 96747901 belt housing part T112750 supports needed This part was broken when the mini turbo brush of my Dyson V9 started to rattle I printed it in PLA and after a year it is still going strong Category:…
Nach gut 20 Jahren sind mehrere der Einlauftrichter meiner Rolladen gebrochen, da das Plastik langsam porös wurde. Da ich den Hersteller und das Modell nicht mehr herrausfinden kann, habe ich das Teil kurzerhand selbst Modelliert. Das…
Originally published here: Xiaomi Redmi Note 7 & 7 Pro m1901f7 case by tato_713 - Thingiverse This case was teste on the phone Xiaomi Redmi Note 7, it may be compatible (because its size) with the Xiaomi Redmi Note 7 Pro (model M1901F7S).…
So my Dad has an Elgato Stream Deck 15 Key (20GAA9901) and was wanting a desk mount after seeing my Stream Deck Mini Under Desk Mount which was my first Custom 3D Printed Design. (See new Mini Deck Mount here ) This should have less flex…
Water tank cap for W639 that is ideally printed in TPU. Inner most diameter is 74mm. That is the exact size of the original part. Print advise: The fit is a tad loose when using TPU. You might want to print at 98% size in the slicer. (As…
While slicing with Cura, increase the size to 111% and make it 100% fill to make it stronger than the original. When done, cut the imperfection and base precisely and enjoy an cheap and easy fix !
Nozzle for vacuum cleaner Electrolux Ultra Silencer ZUSG3901. I made also another one for computer cleaning with a hose. See https://www.thingiverse.com/thing:2739851 Category: Household Supplies
Just bought the new Norden 901 and discovered, that I do not like the “design” (I would also not call it design) of the OEM phone mount. Gladly I already had experience with phone holders for motorbikes (including 3 broken camera modules…
Original file would slice incorrectly and be missing parts. This fixed version slices in super slicer and prusa slicer without any issues
HP OfficeJet Pro 9016 and other printers in this family has a design fault where the printer head movement gear is made out of plastic and breaks. The print head then struggles to move from its parked position. My printers gear broke…
a mini Whelen 2801 Omni directional siren Print Settings Printer Brand: Creality Printer: Ender 3 Pro Supports: Yes Resolution: any Infill: i used 10 gyroid Notes: you can print it as one piece with a really annoying support removal or…
This autoclip is applied in the car, truck and other vehicles industry. With an OE clip, panels, strips, bumpers and other parts are connected to each other or the chassis of the vehicle. Often the clip breaks when discontinuation of…
Honda Push Rivet 6MM these are push-to-release rivets with captured pin Modeled for Honda Dax Battery shroud Honda Part number 90116-K0A-E11 Suggest printing the rivet outer part in 90° orientation for best strength as shown in…
There was a little gap between the mounting point and the Original GPS Mount (KTM Part Nr. 63512992144); this allowed the mount to rock back and forth, which slowly but steadily seemed to loosen the two bolts holding the mount. The part…
This model is compatible with the lego system.
Mounted with original screws. I recommend printing at 0.1 mm height and with increased number of perimeters. Mine are made of Plast-Spaw PLA and never had any issues in a few months of wearing.
This model is compatible with the lego system.
Modular Mount. Baseplate to be added to a GPS Mount/Stant for an Garmin Zumo. Can be changed to a differnet GPS by doing a new GPS Stand. V2 of Garminhold is 1 cm lower above the TFT so it didnt block the airflow.
Part requires significant flex to install, I didn't have any issues with pla +, but your results may very.
Parts form Ikea - Komplement - 130900/130901
Note: The Ethernet Module PINs didnt land where I expected based on the model, so I used a knife to cut the lower two standoffs. I attempted to replicate this in the .STEP but its not tested and certainly would be below the expected…
Important: Please load latest version, project is still in progress. Wichtig: Bitte die aktuellen Dateien laden, da das Modell immer noch in der Entwicklung ist. Beim Modell handelt es sich um die Weiterentwicklung und Überarbeitung…
Lego rotor spare part 99012. For nicest quality print in standing position. Printed with 0.4 mm nozzle. 0.1 mm layer height, or variable LH overhangs 0.1, rest 0.15-0.2mm Lower part with 0.3 mm extrusion width.
These switch covers for the Mercedes Sprinter W903 offer a snug, secure fit—requires firm pressure to install properly. Printed in ABS-GF with 3 walls, 15% gyroid infill. Supports optional, but recommended for best results. Available in 3…
Gridfinite Knipex 9010165 Cuttermesser cutter knife. 2x5 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
I made a more sturdier new Version 2 which can be found her: New Version 2: Replacement fix for BOSCH fridge door tray 00705901 // Ersatzteil Bosch Kühlschrank Türfach I'll leave the old version here since it uses very little filament:…
Two designs one for GPS Matek M10Q and Crossfire antenna mount in the back. Important info about GPS! Mount it is made low profile so You'll need to unsolder bottom connectors and solder wires directly to GPS. Can also hold DJI O4 Pro…
Republishing a part that saved me some $$$ for my dyson repair. This design have been in my dyson since a year now and still working like new to this date. Thanks to Sulya for designing this one. *** Dyson Mini Turbo 967479-01 96747901…
#gridfinity organizer for the CreationSpace CS1901A. Includes bit holders for the 32 included 1/4" bits.
Just broke a gear on my HP9010 printer and no replacement part from HP so their you go! Printed in rPETG with 0.3 line width & 0.1 layer height 100% infill and it seems to be holding load :D Have fun
For assembly need two M3 screw and nuts
The mounting of the door tray failed on my BOSCH fridge. So here is a little Model to fix the broken mounting. This is a improved -more sturdier- Version 2. Printed with Prusament PETG Urban Grey . The print in the picture is from a MK4S…
I reproduced the original Husqvarna ABS sensor cable clip because this cable rubs on the wheel and cuts. It is 10mm longer than the original
For my friends from Offenbach/Germany :-) If you want to do a 2 color print, please create your gcode and upload it to: https://www.prusaprinters.org/color-print/ and add a color change to layer height 1.2mm Category: Coins & Badges
This is the stock class horizontal feed adapter for the CCI Phantom. Screw is 8-32x5/8" SHCS
FlukeEmu 9010A Case The case was designed with specific parts as there are just too many variations of items out there. 7" Touch Screen https://www.amazon.com/gp/product/B07L6WT77H/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Micro SD…
Matek Optical Flow & Lidar Sensor 3901-L0X Housing (for FPV/INAV Drones) This is a custom housing designed for the Matek Optical Flow & Lidar Sensor 3901-L0X / PMW3901 module, created to mount securely under The Scout FPV drone (or any…
A remix of the TP-Link wall mount - drill-less by derekzoli. https://www.thingiverse.com/thing:734126 I removed the square part and added two screw holes. Fits the TL-WA901ND and 801ND perfectly. Print Settings Printer: Anycubic i3 mega…
lego 90195 30044 30046 30045 20309 60808 40066 35565 4218
This Geneva mechanism uses F6901Z Flanged bearings to smoothly rotate when in operation. This model is great for learning how the Geneva mechanism works. It also makes a great desk fidget toy. It only requires you to print 3 very simple…
This hinge ist for the AEG Parts numbers : 2231129012 2231128014 Left and Right are identical I was very fried and really pissed off at AEG for their crap quality this hinge broke after 3 months of use and even after two new free hinges…
Hose adapter for vacuum cleaner Electrolux Ultra Silencer ZUSG3901. You can use this to clean your computer (small places). You can use it with a hose of 12 outside diameter. Warning: don't use it to long because your vacuum cleaner will…
Heyhooo Here I have some legs for my PC Case so it is not that close to the floor any longer. I have the problem that it is quite dusty in here and I wasn't able to clean beneath the PC. So I designed these legs so the pc is a lot higher…
This model is compatible with the lego system.
Both the front and back rack mounts for Refrigerators manufactured by Whirlpool including KitchenAid and Kenmore
Clamp for installation of Wisa Developer Naumov Georgy
Porsche 911 901 Coupe 1964-1969 Racing
Outdoor use, print with ASA or other UV resistant filament.
This is a 2-Piece Design, Intended to be Wall Mounted and Hold the Vtech VM901HD Baby Monitor (Camera). This Cup Style Design Allows for Easy Access to the “On/Off” Switch and Also Plenty of Room for the Power Cable. I Designed This with…
This is a wall mount for a Shark hand held vacuum with a charge port. This should fit the following models CH901, CH950, CH951, and CH955. I added a recess for the AC adapter so it stays put.
The couplers on my kid's train keep going missing, so I modeled this hook as a replacement part.
The knob on my Carrier Furnace 58STX045112 cabinet broke so I used my digital calipers and some Fusion 360 know-how to model a new one. I've included the f3d file for you to further optimize if you'd like but it's fully functional and…
biellette de réparation pour bouche de ventilation
A case for the CreationSpace CS1901A I printed in ABS using stock Bambu Lab settings. I used using 4 walls and 30% gyroid infill and 4 top and bottom layers at 0.4mm layer height. Latches require 35mm M3 bolts and screws. Takes around 5…
Hair clipper for the Patech PM-9012 gadget. Upload your make if you like this :-) Update 12.2.2022: after several brakings of one of the "stick" I made them thicker. Category: Fashion
This is a basic enclosure that allows to use C/CS lenses with cheap HBVCAM 1901-720 usb cameras (the sensor on these is tiny: don't expect a DSLR-like image quality!). Note that this enclosure is made to be screwed on a flat surface (that…
I was having trouble with my spools popping off their wheels when the spools were new and at their heaviest. Hence, this alternative spool holder for Original Prusa i3 MK3 ENCLOSURE -Ikea Lack table - Prusa Research using 6901 bearings to…
Simple box with a lid for MR.GREEN MR-9901 Nail Clippers set You can get one from aliexpress - it's cool. I've seen it on amazon, but it's currently unavailable. Printed with PETG 0.2 layer height, 0.635 line width.
Battery Box for Norden 901 to house a LiFePO Pack with Balancer, 150x87x105mm, plus left hand, m3, petg
This is the urethane belt used on the Task Force 90181 10" band saw wheels. This also might possibly fit the Craftsman 113.244513 10" band saw since these two saws are identical looking. Printed in 95A TPU this fits my Task Force 90181…
Replacement hub-caps for these wheels cost $100-$150 because apparently they're made of rare plastic found only in remote corners of the world un-reachable by mortal man. On top of that they're poorly designed so tightening them to the…
This is a custom bearing extractor and bearing receiver for 8 of the 12 bearings used in a Norco Fluid rear suspension. The other 4 bearings will require you punch them out or use a sliding hammer bearing puller sadly. Additionally, the…
Endstück zu Brüstungskanal BRN 70x110mm von Hager
I was tasked with scrapping 2 old Dell OptiPlexes. Instead of binning all the parts, I set about reusing as many of them as possible. This model allows you to re-use the PSU in a standard computer case. Be aware that it may collide with…
Simple weight/dumbell holder for the Sunny stationary bike. I used a dab of CA glue, and a bolt to put the two together.
Mounting case for matek optical flow and lidar sensor with 30x3mm bolt pattern. Fits GEPRC GEP-LC75-V3 or any 30mm mount. These things are made to pretty shoddy tolerances so I provided the files if you need to nudge the loft for the…
This is a replacement for the table angle adjustment knob that adjusts the angle of the table on the Ryobi BS901 9" Band Saw. This part is no longer manufactured by Ryobi. It is not an exact replica, but it is fairly similar, and most…
Filament Profile for Taulman PA 901 Alloy X1C
ATEN model NO.VE901 rack mount PETG without supports
Simple holder for the great Creationspace screwdriver
The HBVCAM 1901-720 is a thin usb camera strip, probably intended to be integrated as a laptop webcam. The image quality is mediocre, but the camera is very cheap, making it a good candidate for CCTV setups based on Raspberry Pi-like…
Leaf guard for TFA 30.3161 Monsun / KW9015 rain gauge.
Dark base 901 pro modification for honeycomb front panel for mounting accesories. Everything is printed with 0,20 Speed settings. Screws are 0,15 structural Material: PETG Need 6pcs M6 nuts
I recommend printing the bolt at 105% scale, depending on your printer's resolution. You’ll also need to download the camera base from @Skyline0439’s file. I didn’t include holes in the wall-mounted part, as it’s designed to be installed…
This Plate is for Mounting Vtech VM901 Baby Monitor Camera Unit to a Vertical Wall / Surface. Plate Dimensions: 61mm Ø x 5mm Thick (+ Top Mounting Tabs) Screw Hole Dimensions: 4mm Ø (Shaft Hole) Screw Head Dimensions: 7.5mm Ø x 3mm Tall I…
After dropping my screwdriver the plastic stem that connects to the torque adjustment/on-off button broke off. Remove the torque indicator sticker at the back to reveal the screw that keeps everything in place. Printed at 0.2mm layers…
Replacement end cap for the ClipOn/HangOn/Xpress series inspired by the 50901 part number. This is not an exact replica
This holder mounts to two of the standoffs in the front part of the mower. The standoffs are drilled and M3 heat set inserts (I used BOSSARD 1386743) are pressed in. M3 screws are then used to secure the holder. The PCB to the left of the…
The so-called “Medallion of Indulgences” or “Saint Benedict Medal” was instituted by Pope Leo XIII in 1901. It refers to the Medal of Saint Benedict, the Crucifix of Pardon, and other sacramentals such as crosses and rosaries. For a medal…
Hakko fx-901 Cutout for gridfinity
Replacement Radley cordless trimmer line box cover. The retail 'replacement' covers did not fit the trimmer so I modeled my own. Printed using PET-G. Specific part#s: 5073-047 - 3160090101 Covers in use were printed on a X1C using PET-G…
If you do not want anybody to change the temperature on your gas boiler, you should protect yourself with a magnetic lock and you are calm Category: Tool Holders & Boxes
This flag is my favorite Flag because it is so simple but so elegant and It is well well-known flag in my state even tho it is not the current flag. In the photos, I put an Image of the flag so you can see it in its original form. I have…
Mounting plate with 90 degree angle for brick wall or flat roof for TFA 30.3161 Monsun / KW9015 rain gauge. Uses two M3x14 screws and nuts for mounting the sensor. Thx to Eike for helping me drawing the whole thing in Fusion360.
Husqvarna Norden 901 Brelock
Hält Stanley 5901 Klingen
This is the GPS mount I'm using to mount the UBLOX RTK GPS or HA901 antenna inside my YardForce Classic 500/500B mower. Print in PETG
Remixed the existing excellent fitting part by Beusekomse Baan and the very nice looking coal load by af12689. Thanks allot for making those available!
Custom enclosure for SP901E with cutouts for Molex SL series 4-pin connectors. Has space for a Corsair Lighting Node Pro as a controller, a pass-through for a USB cable and a hole for a power connector. See video here:
Requires 1/4"-20 insert. I used this one: https://www.amazon.com/dp/B09MTS6ZZQ S version is intended to save filament. Adapter 2 is for a better centered post mount. It also prevents the Alfa mounting plate from bending when tightened.
https://en.wikipedia.org/wiki/Flag_of_Maine_(1901%E2%80%931909) Included both the full print and parts.
Replacement clip for Honda Concerto "side skirt" 91520-SJ4-901_ｻｲﾄﾞｼﾙﾓｰﾙﾃﾞｲﾝｸﾞ Done fast as I needed it asap and no replacement parts are sold or available anymore, not 100% but works on my JDM car, not sure if its the same on Rover/euro…
I added a frame for a 10 inch lcd panel in order to use an AIDA64 sensor panel.
LIEBEHRR 9901000-00 Bac à Glaçons Compatible réfrigérateur modèle CNef 4825-20D 088 Modèle du bac à glaçons en plastique Imprimé en PCTG avec remplissage à 5 paroies et 100% de remplissage Le mieux serait d'utiliser un matériaux…
TK901 GPS Tracker Holder – Sliding Lock Lid Looking for a practical way to mount your TK901 GPS tracker on your fatbike, e-bike or bicycle? This compact 3D-printable holder was designed specifically for the TK901 GPS tracker. After…
Just a speaker adapter for a 2017 Subaru Crosstrek, didnt like how thin and flimsy the Metra 82-8901 was. I then re-designed one, it has both 4 bolt pattern and 3 bolt pattern for the speakers, it does what the metra 82-8901 does. The…
Simple interface attachment for EPSON VT6-A901S industrial arm with spacer for mounting vision accessories and a simple interface for attaching custom end effectors. Item Material Support Brims Count Spacer Rod PLA-CF No No 2 Mounting…
