Liczymy pasujące modele…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Pumpklin with removable lid based on the design seen in the 1978 Halloween movie credits. I made this as part of a learning excerise using the Loft & Sweep tools in Fusion360. For use with battery operated lights only - I recommend a…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bAtgLxkPDlw Category: 3D Printing
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a new modeled track for the matchbox railway from 1978/1979. It is almost compatible with the original track. It does not fit to 100% but it works fine.
This autoclip is applied in the car, truck and other vehicles industry. With an OE clip, panels, strips, bumpers and other parts are connected to each other or the chassis of the vehicle. Often the clip breaks when discontinuation of…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
LEGO FORD 1978 Police Pickup Base
Print this with translucent resin. I'll leave perfecting that to you! Good luck! Category: Toy & Game Accessories
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
A hole needs to be drilled for the stock speedometer spring.
The Professionals - Ford Capri Mk III 3.0 S (1978) - 1977-1983 3D printable model.
Mork & Mindy - Mork (Robin Williams) - 1978-1982 3D printable model.
The two halves clamshell over an aftermarket LED headlight. It can then be mounted to the stock location using the original hardware. Printed with supports in PLA. Might recommend PETG for durability. The design utilizes M3 and M5…
Halloween 1978 Micheal Myers Pumpkin Pencil Holder With Removable Lid
Vega$ - Dan Tanna (Robert Urich) with his 1957 Ford Thunderbird - 1978–1981) 3D printable model.
Invasion of the Body Snatchers - Matthew Bennell (Donald Sutherland) - 1978 3D printable model.
As most of the still existing A1 amplifiers seem to have broken hinges which are practically impossible to replace, I created my own version which is suitable for 3D printing. Best orientation as in preview. Supports only needed under…
Model with true aspect ratios. Ideal for hanging on the wall. 200x3mm. Collect all the CarSilhouette! Wall Art
Vintage Cars - 1978 Subaru BRAT 3D printable model.
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! THE MINI VORSCHTEIN 978 is a mini version of my 1:10 scale Vorschtein 978 supercar model. SIZE / WEIGHT: Total assembly: Roughly 85 x 40 mm Filament: I used roughly 20 g of…
Dawn of the Dead - Peter Washington - 1978 3D printable model.
Dallas - Pamela Barnes Ewing - 1978-1991 3D printable model.
Dallas - J.R. Ewing - 1978-1991 3D printable model.
Hi guys, this is my fifth design design that I upload to Printables and I want to share it with all of you. The printing in normal PLA with the following parameters in the slicer of your choice (but you can use the parameters that you use…
I ended up crashing my truck and it turns out that some parts for this model are getting hard to find especially since the manufacturer no longer sells this particular part. I managed to repair my existing part and I already purchased a…
The classic Lego Space moon buggy from 1978… reproduced at a scale of 5:1 - it just fits within the 10" constraint of 3D printers such as the P1S. Get the helmet and air tanks from @liftcrazy_1397593 - I scaled each to 50% and made the…
Dallas - Lucy Ewing Cooper - 1978-1991 3D printable model.
Dallas - Bobby Ewing - 1978-1991 3D printable model.
Dallas - Sue Ellen Ewing - 1978-1991 3D printable model.
Dallas - Jock Ewing - 1978-1991 3D printable model.
Dallas - Miss Ellie Ewing Farlow - 1978-1991 3D printable model.
Print 2x 99780 in grey as per the original models parts list. Double check the scale relative to the original pieces to ensure fit.
I designed this stand because the one from the Dutch Cylon was to big for my bookshelf and took up too much space. This unit includes a spot for the three recharge cylinders made by the Dutch Cylon as well. *******If you want one that…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Made from pics I found & liked. Models may not be perfect. Made to 150mm (may differ due to pose). Made in STL & 3MF.
Pumpkin from the original Halloween 1978 Movie Michael Myers with Freddy Krueger Hand coming out from the top. Pumpkin is hollowed out with hole in the bottom to place your favorite LED Light or Tea Light Candle. Perfect for Halloween…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
Replacement nozzle. Print upright with brim, 7 walls. The model has a hexagonal drill holder molded on. This allows you to shape the cone onto the cone in the lance at medium speed (gets warm). then the part is cut off and drilled through…
Mopar 1970-1978 engine compartment wiring harness retaining strap. May fit other years also. Original designer: Chrysler Co., Detroit MI. USA I disallow commercial use of this model. Version 2: 18.12.2025 Increased thickness and removed…
I designed this stand because the one from the Dutch Cylon was to big for my bookshelf and took up too much space. This unit includes a spot for the three recharge cylinders made by the Dutch Cylon as well. The first plain version I made…
Made from pics I found & liked. Models not perfect. Made to 150mm, re-size as needed. All made in STL & 3MF formats.
The Antenna for the 1978 TOBOR robot toy is also the sensitivity adjustor. It is always broken or missing. So here is one you can 3d print to get things working again. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No…
PET-G used, printed with support, 0.6 nozzle, 0.2 layer height.
Printable 3D model. Tatsugiri chopsticks rest. Pokémon inspiration. STL file.
Cuerpo de Policía Armada y de Tráfico (1941-1978)
Replacement clips to hold the upper bed molding tailgate trim in place that often break when removing the trim. This design reuses the original metal spring clip so keep that when removing the old broken piece. I printed these out of ASA…
If you do not own an old 1978-1987 (or thereabouts) GM G-body car, this model isn't for you. The lower stereo mount tabs on these cars are very fragile, and especially if you have been in and out of that area many times, or replaced the…
These are the parts for my Plain and Greebled display stands that have been modified to fit the smaller standard size colonial blaster. (NBDS - Normal Blaster Display Stand) There are four modified parts for each version. NBDS_Peg…
Made for this particular unit on amazon: https://www.amazon.com/dp/B07NDNBW6G It is a friction fit, I imagine a drop of glue would be desirable if it's subject to vibration.
My 1978 FORD Gen2 Bronco restoration project was missing a plastic seat lever on the passenger side. My modeling isn't the highest quality, and some measurements may be slightly off. But you can't purchase these even from LMC, and for…
Printing This model is almost 1:1, with some adjustments made for printability. I have made other variants to adapt larger carbs, but I figured I would share this one. Originally wanted to make a mold and cast them from urethane, but I…
This is a battery cover for the Clairtone 7978 boombox. It may also fit similar models such as the Yorx K3681, Rising 20/20, SRC-2015, and Clairtone 20/20. The battery cover is 323mm wide, it can be split up in the slicer for smaller…
If you need it, you will know If printed in ABS / ASA dont forget to compensate shrinking! With my filament it was 0,9%
This is an iconic pumpkin for decorating any home.
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! The Vorschtein 978 is a large 1:10 scale display model. This model was inspired by a Porsche 918, and portrays what it's successor could look like. SIZE / WEIGHT: Total…
3D model of the rubber gasket used when installing cargo rails on a 5th gen El Camino. All dimensions were taken from the one original gasket I had on a set.
This model is compatible with the lego system.
This model is compatible with the lego system.
LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY! The Vorschtein 978 is a large 1:10 scale display model. SIZE / WEIGHT: Total assembly: Roughly 45 x 20 cm Filament: Roughly 1 kg of filament using 10% infill. MAKEABLE FOR…
Cheech & Chong 3D printable model. Super easy to print, set the size you want and go!
Invasion of the Body Snatchers - Matthew Bennell (Donald Sutherland) - 1978 3D printable model.
Animal House - Flounder (Stephen Furst) - 1978 3D printable model.
Animal House - Flounder (Stephen Furst) - 1978 3D printable model.
Animal House - Bluto (John Belushi) - 1978 3D printable model.
Animal House - Bluto (John Belushi) - 1978 3D printable model.
Animal House - Otter (Tim Matheson) - 1978 3D printable model.
Animal House - Otter (Tim Matheson) - 1978 3D printable model.
Wonder Woman - Diana Prince (Lynda Carter ) 1975-1978 3D printable model.
The Incredible Hulk - Bruce Banner (Bill Bixby) & The Hulk (Lou Ferrigno) - 1978-1982 3D printable model.
Mork & Mindy - Mork (Robin Williams) - 1978-1982 3D printable model.
Vega$ - Dan Tanna (Robert Urich) with his 1957 Ford Thunderbird - 1978–1981) 3D printable model.
This is a lens cap for the Polaroid OneStep Plus released in 1978 with the square lens . Its not a perfect fit and shape (the corners could have been rounder) but it'll hold on well enough to protect the lens. Please match your camera to…
gridfinety for BE-9785 (note. you have to cut of the back henger part of the set for it to fitt) i have not printet the innfill part my self so i am not sure if it fits
Death on the Nile - Hercule Poirot (Peter Ustinov) - 1978 3D printable model.
Death on the Nile - Hercule Poirot (Peter Ustinov) - 1978 3D printable model.
Replacement part 209788 for Schüco door stop knobs. Their black plastic gets worn out after some years and you have to re-adjust your knob for a temporary fix. Printed with 15% infill and PETG (using PLA as support interface). 2x Screws…
Horror Movies - Invasion of the Body Snatchers - Dog Gone Wrong - 1978 3D printable model
TSR logo from used from 1978-1980. I have always loved this logo as it was just a simple wizard with no wording. This is set to a 1mm thickness as it is hard to see his features if much deeper. Print and glue magnets or strip magnets to…
The plastic barrel for the brake light switch assembly of a 1978 Kawasaki KZ750 The original was snapped in half due to previous owner accident, I tried gluing/epoxy etc, but it wouldn't stay in one piece. So I designed this and lo and…
This model is compatible with the lego system.
This model is compatible with the lego system.
