Liczymy pasujące modele…
Model Protector lga 1200 socket, if the factory one is lost. Required for delivery. Print settings: - Material: PLA - infill: 15% - Perimeters: 3 - Nozzle: 0.4 - Layer heigt: 0.2 If there is a size problem, use the Slace function. - If…
Display Stand for the Commodore Amiga 1200 Two versions one puts the Amiga in a more vertical position
The rear clips on the Amiga 600 and 1200's are prone to breaking if you look at them funny, never mind take it apart every week to install a new accelerator, or gotek, memory upgrade etc. This part fits in between the existing clip lugs…
I bought a Goex + OLED display from Centuriontech. Like everything I have received from there it is excellent but the filament used to print the housing for the OLED was not a great match for my case. I have a good opaque white PLA that…
UPDATE 11/11/2023: Added rotated version of Pi, Emu68 and Amiga logo UPDATE 20/10/2023: Confirmed OK on A600, Added Pi and Emu68 logo A case for the MicroSD/SD Memory Card Slot to TF Card Extender Cable Extension. Created for the Amiga…
This is a rear trapdoor and a holder frame for the HDMI output of the Individual Computers Indivision AGA MK3 on an Amiga 1200. The design is specially made for A1200.net replica cases, and may not work for classic Amiga 1200 cases. It…
This is a mounting case for OLED and Rotary dial for Gotek Running Flash Floppy firmware. Can be used for Amiga 1200 with gotek or other retro computers
Since I didn't want to drill holes in the beautiful case from A1200.net , I designed a small panel that fits directly into the expansion opening of the case. I use several switchable extensions and an RGB2HDMI mod in the Amiga. Holes…
one-piece cover I print the cover from TPU 95A. Putting on the adapter is best when the cover is still warm, I put it on with the USB connector facing forward. It takes a bit of force. two-part cover I print the two-piece cap from PLA.…
Holder for A1200 KeyCaps. Each KeyCap has its own compartment and a square connector to mount onto. The connector has a through hole for easy removal of the KeyCap. Case has a lid which simply slides snuggly onto the base. Requires a…
I modified the back trap door with slots for 1xMicroHDMI, RJ45 network.and a slot to keep the microsd case in place. The Micro HDMI connector socket is designed to hold the Micro HDMI Type D Female FPC Connector Socket with a flat cable.…
Modified back trap door with RJ45 and Micro HDMI slots. Used on Amiga 1200 with a Vampire 1200 accelerator. Get some flat ribbon cable for the network module, and remove the top on one end or else you will be touching the floppy drive.…
Modified back trap door with slots for MicroHDMI/HDMI and RJ45. Also made an opening for pulling a microsd extension out of the computer (Micro SD Memory Card Slot to TF Card Extender Cable Extension) If you use the HDMI version, you must…
In my A1200 I have a PIStorm32-lite with CM4. I find it convenient to be able to eject the microSD for backups. In developing the trapdoor I am using it went through three stages: plain (to get the dimensions and latch right), for…
Amiga 1200 Gotek Cover to add Rotary Encoder to A1200.NET case A1200.NET cases have cut-outs for adding an LCD screen to the case when using a Gotek. This simple print expands the top cut-out (in the grills) so you can add a rotary…
The access points from Plasma Cloud come with a variety of wall and ceiling mounts which can be clipped on easily. But there was not one a single one which can be used as desk mount. But the orientation can be rather important on these…
An Amiga 500 floppy mount for the A1200.NET case. Sins it has a left side leg it does not work with an Amiga 500 original case. Made with FreeCAD 1.1.3.
For mounting the encoder, it's better to use a rubber washer between the PCB and the top plastic board. Display mounts are available in 2 models: normal and flipped vertically for new Goteks, where the display renders upside down. PETG…
Spacebar spring location for mechanical a1200 net keyboard (use original keyboard springs for further stability), glue into place
In my A1200 I have a PIStorm32-lite with CM4. I find it convenient to be able to eject the microSD for backups. In developing the trapdoor I am using it went through three stages: plain (to get the dimensions and latch right), for…
Case → https://www.a1200.net/amiga-500-case/ For use with this micro hdmi to hdmi adapter → https://a.co/d/itEe6GM Print with PETG or ABS with a .4 nozzle. Female hdmi adapter snaps in but there is space to use double sided tape, I ended…
I picked up a DeepCool Gamer Storm cpu water cooler at the thrift shop that was missing the mounting brackets so I made these. I installed them and ensured proper alignment but unfortunately the water cooler didn't work, so I couldn't do…
A case for the MicroSD/SD Memory Card Slot to TF Card Extender Cable Extension. Created for the Amiga 1200 and used together with my Vampire 1200 card. Created another design here which also fits the Amiga 500, 1200 and probably 600:…
This module is designed to fit into the rear of the A1200.net case and houses a SD card socket, a HDMI extension and optionally the DB9 mouse connector. A 1D4 revision will often have this as a single socket on a short cable unless you…
