Liczymy pasujące modele…
As seen on X and YouTube: Designed for use with the Tang Band W3-1876 woofer, and the GRS A25-2T tweeter. Usable overall bandwidth of 50Hz - 16kHz in the nearfield; ideally against a wall. Tang Band W3-1876S 3" Subwoofer:…
Bracket for DC motors from the JGA25 37 family. Onshape: https://cad.onshape.com/documents/feb46ee6ddb83e531a195605/w/09a963822244fc31aad22e58/e/a61a4ff87600e5801b61fc7d?renderMode=0&uiState=664de00d90ef4862b8c3456b
Useful to model off of, not perfect but is dimensionally accurate.
Fits Snapmaker A250T and A350T. Check the images to see if your 3D printer tool head looks the same. Instructions: This page is for the multi duct part cooling fan adapter and spool holder parts. The Snapmaker A250T and A350T are…
Printed in PLA, 0.4mm nozzle, 0.2mm height, 15% infill density, and no supports. Should allow you to read pinouts and wire the board while in case. Can be powered in case. It is a snug fit. I recommend sliding the board into position and…
Printable casing adapted to Samsung A25 5G. I leave you the configuration and printing files that I have used with good results. The filament I used is TPU Flexfill 92A from Fillamentum. I also leave you the stl file so you can make your…
Use this piece to replace the original watch charging holder for the Anker A2579 and allow it to charge the Pixel Watch.
Designed a case for the Arduino Mega 2560 with a hexagonal pattern, because the ones I found, didn't fit the non-original boards I've got. I Made sure that it'll still fit the original boards. Case should lightly snap together, bottom…
This is a cover case for Samsung Galaxy A25 without cutoff for volume and power button. I remixed the model from Johan Fuhri, I cover the big cutoff with two button for pressing the volume and power button. I don't use the fingerprint…
fischertechnik Gear Z20 for ZGB25RP and JGA25-370 DC motors with 4mm D-Axle Category: Robotics
Spool hub and side wheel - keeps the filament spool in place and stable, ensures consistent easy rotation as the printer head moves. This should be compatible with most if not all Snapmaker printers that have spool arm design as in…
TOBSUN EA50 or EA25 5V mouting option. Includes a short ZeroG DIN rail mount and an adaptor plate to mount the converter on the DIN mount. Both rail and mount use M3 heaset inserts (VORON size). BOM 6* M3 heatset inserts 6* M3x8 button…
A protective case for your Samsung Galaxy A25. It's designed specifically for PLA, unlike all the other TPU ones. The hole for the side buttons is large enough to make the fingerprint reader usable. All the holes are cut all the way to…
An ORP-Compatible mounting bracket for JGA25-371 DC motors. About ORP ORP (Open Robotic Platform) is an open-source project for developing reusable and user-friendly components for use in hobbyist robotics. By following a set a design…
Motor uchyťte do držáku pomocí svou šroubků se zápustnou hlavou M3x8. Přírubu je nutno na osičku natlačit, může být potřeba použít trochu větší sílu.
The tuning knob on my iCOM IC-A25N aviation radio cracked and broke. This is a replacement that's more robust. Material: PETG Layer height: .15mm Infill: 100%
Holder for Anker 313 Magsafe pucks featured in this amazon link (https://www.amazon.co.uk/gp/product/B099WRPVJK/ref=ox_sc_act_title_1?smid=AISREEIOH9TSP&psc=1) Which was a budget friendly alternative to the original Magsafe buck. I get…
I needed this charger to sit flat so I could fasten it with VHB in my car. The holes on the side probably allow some cooling to happen, they are primarily there to allow you to pop the charger back out of the holder.
fischertechnik Gear 10 for ZGB25RP and JGA25-370 motors Category: Robotics
I wanted to be able to use a MagSafe charger in my vehicle with my Unholey Mount that uses the Ram mounting system. The official Ram mount uses the Apple MagSafe charger. The Apple MagSafe charger magnet was too weak to display my phone…
Designed for Fat Daddy´s v4 low profile 510 and keystone battery connectors P/N: 228 and 209 This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/icMLb2AT3zu Print Settings Resolution: 0.2 - 0.3 Notes: ABS…
Snapmaker A250 Print Sheet Bracket Fixation with M4 10 mm screw
English A simple wall mount for my YT-Industries Decoy ebike charger. Model: BC222360040 Should be equivalent to the MDA254 (www.mdacharger.com). Use two 4.0 or 4.5 mm countersunk bolts for mounting. Deutsch Eine einfach Wandhalterung für…
Car Brodit plate for my Samsung Galaxy A25 in the transparent cover/case Easy customizable in Atodesk Fusion 360 for another phones - just edit sketches for desired dimensions. Tested with PETG. PLA not recomended - during hot summers…
I just lopped off the left end of Oscar's Arduino slot and the Mega fits right in.
SOPORTE PLACA MEGA2560 LLEVA INGERTOS M3/OD4.2/L7
see here: https://www.printables.com/de/model/459155-snapmaker-a250t-a350t-multi-outlet-part-cooling-du
fischertechnik 4mm Shaft Adaptor for ZGB25RP and JGA25-370 motors. The inner diameter of the shaft adapter is 4.25 mm. Try to print with highest resolution for best fit. Category: Robotics
A recreation of the battery cover of the Harbor Breeze A25-TX012 remote control. Supports recommended. If you have issues printing the overhangs at the top I may recommend printing with the supports only on the bed plate. Filament: PETG
Housing for JGA25-370 DC motor with centric shaft for fischertechnik The end caps can be used for both the (eccentric) ZGB25RP and (centric) JGA25-370 DC motors. The fischertechnik plugs directly contact the small brass lips on the motor,…
Doesn't require supports. They're mirrored versions, depending on which side you want it.
This is a holder which holds all the bed surfaces for the Snapmaker 2.0 A250T, as well as the tool box which comes with the Snapmaker 2.0 and it slots onto the side of the enclosure. The print bed and CNC bed just slot onto the 'hook'…
It allows you to use the snapmaker cnc keeping most of the dust inside the plate to be vacuumed once finished. The model is built on the plate of the 250 version, so as not to block any holes to fix the plate and trying to minimize the…
Holder for mounting Icom IC-A25 VHF air band transceiver to Brodit Proclip system. Simple holder for a handheld VHF airplane radio that fits with all Brodit Proclip mounting solutions.
Mega2560 ProMini case M2x6 screws Print Settings Printer: Hephestos2 Rafts: No Supports: No Resolution: 200micron Infill: 20% Category: Electronics
fischertechnik Grooved Block for 4 mm Shaft ZGB25RP & JGA25-370 motors. The inner diameter of the shaft adapter is 4.1 mm. Try to print with highest resolution for best fit. May be secured with a headless 2.5 mm Inbus hex socket screw.…
Axle seal driver for a 2012 Subaru Forester. 4EAT Automatic transmission. Not sure if it would work on Manual but I assume due to the diff location. May also be compatible with the outback or other foresters (not 100% sure, check your…
Figured I should share this in case it might help someone. Fitment was tested on an SA254M2 cannot guarantee fitment with other models. This model was printed in PLA+ on a Creality Ender 3 Pro. Supports: ON Infill: 100% Adhesion: NONE…
This adapter, for use with the Anker A2579 charging station, allows you to utilize it with your 41mm Pixel Watch 3.
This is a remix of Rocinante2's Wyze Camera Mount for the A350 enclosure . I slotted the bottom hole so that it would also fit onto the threaded holes in the A250 T-slots, which are apparently a little bit closer together than in the…
All the other alignment tools I found mounted either in the center or otherwise and lost a lot of space. So I modeled this one up to take up the least amount of space and quickly removeable if needed. I may swap the pins out for M4 screws…
Changed magnet size to 8x3 because that's what I had.
So the newest Anker Qi2 charger (A25M0) works great, problem is the back of the charger is curved, so it tends to wobble when something heavy is placed on it, and even fall off. This holder/stand fixes that. Holds the charger firmly and…
Battery compartment for the Arduino Mega2560 / DUE board Category: DIY
MKS BASE v1.4 BOX (MEGA2560) CS: Tento model byl vytvořen za účelem updatu staré boxu pro desku, který byl vyroben z akrylového plastu a byl během používání poškozen a poškrábán. Navrhnul jsem ho na hliníkový profil 20x20mm s drážkou 6mm…
Sliding drawer that fits under the Snapmaker 2.0 A250 build plate.
Telescope OnStep goto controller Box for Arduino MEGA 2560 with Prototype PCB for Arduino MEGA 2560 R3 Shield Board or CNC 3.0 shield . More info about OnStep goto controller on Howard Dutton project For my version on prototype board -…
This is the YARN WINDER v2 MOTORIZED version adapted for the JGA25-370 motor. In the remix, I added: - GEAR_24 version for the JGA25-370 motor - YARN_Housing_bottom version for the JGA25-370 motor - YARN_Housing_bottom version for the…
Drop in replacement to fit a W3-2025SC. The T/S parameters of this driver are similar, but not exactly the same. The t-line should still be within tolerance to function properly, but performance likely changes slightly. My untrained ear…
Simple stand for ANKER A2567A PowerWave charge pad print with 2 perimeters, lightning infill 15-30% This will make object completely empty and light so you can pause mid print and fill it with stones and marbles and sand and... whatever…
I wanted to install the Arduino board on the printer, but I couldn't find a suitable place, that's why I designed this piece. I hope your problem will be solved. First, install on the profile, then install the Arduino board Important note…
https://cad.onshape.com/documents/fb7b8e8cd253dee8fe0b3e05/w/49694d5233130957590d1f8b/e/5d036e2f3051e63d08976ae1?renderMode=0&uiState=6781b7cbd7003409359689ae
I love having a wireless charger for my phone. The problem is that if the phone isn't centered over the charge coil, the charge stops. It's disappointing to pick up your phone in the morning only to realize that it got bumped the night…
I had bought the cupholder mount because my previous one had completely destroyed itself and this new one didn't have support for my ball and socket based magsafe mount. I had an Anker A25M0 wireless charger around and i wanted to have it…
Box for Arduino Mega and Ramps shield for 3D printer (Rebel II)
This is for Voron, you need Work with Voron DIM Rail Mount.
A simple wash station made from a 12v DC motor and some other components I had lying around that I bought at AliExpress at some point. The DC motor I bought was the GA25-370 - 280 RPM / 12v, and it does seem plenty fast enough for this.…
This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for…
Changed magnet size to 8x3 because that's what I had.
This is a mount designed to work with 7.5mm DIN rail from Pheonix Contact. It allows an Arduino to be mounted to the rail with an I1 Interlink Shield from Atlas Scientific inserted. It also has a slot to allow a mount to be installed for…
A protective case for your Samsung Galaxy A25. It's designed specifically for PLA, unlike all the other TPU ones. The hole for the side buttons is large enough to make the fingerprint reader usable. All the holes are cut all the way to…
Drop in replacement to fit a W3-2025SC. The T/S parameters of this driver are similar, but not exactly the same. The t-line should still be within tolerance to function properly, but performance likely changes slightly. My untrained ear…
The Fujifilm X-T200 is prone to overheating, leading to the camera's shutting down while operating. I was surprised when I realized no official cooling fan was made for this model. Some use a PC fan and wire it to the camera, but that…
This model is an add-on cover for the Anker model A2544 2-in-1 MagGo charging stand to hold and properly align an Apple AirPods Pro 2 charging case with the base of the charging stand. The main cover can be printed upside-down without…
A simple stand designed to hold an induction charger. I wanted one that could be secured to my nightstand. The cabling is routed through both parts and exits through the bottom of the “clamp”. The “clamp” isn't a clamp, it's rigid with a…
Apple hat die Größe des MagSafe Charger mit 25W gegenüber dem Vorgängermodell mit 15W leicht verändert. Um die bereits vorhandenen Halterungen weiterzuverwenden, habe ich diesen Adapter erstellt.
Remix of https://www.printables.com/model/175178-magnetic-case-for-apple-tv-4k-remote with 10x2mm magnets
GA25-370 6V motor Complete assembly tyre rim coupler with M3 bolts
For JGA25 motor mounting instead of NEMA17. The JGA25 motor has a different shaft. It cannot be used everywhere. I use it with a https://www.printables.com/cs/model/165025-modular-planetary-gearbox-10241 gearbox to drive the reel from…
Volvo A25G inner piston rod. The size is 40x3mm + the hole for the screw. Use sandpaper if it's too tight.
