P
PrintablesÁgoston György
Lacrosse bookmarks
lacrosse bookmarks
- Pobrania
- 114
- Polubienia
- 8
- Ocena
- 0
Wyniki wyszukiwania: across
Liczymy pasujące modele…
P
PrintablesSully OBrien
Lacrosse head holder for stringing
This is a fairly simple build. It involves four parts. One the block base. The second is the socket base which fits onto the block base. The third is the socket ball which fits into the socket base. The fourth is the tightening screw,…
- Pobrania
- 19
- Polubienia
- 3
- Ocena
- 0
P
Printables
Drill Guide for Lacrosse Ball Scuffer/Renewer
This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…
P
Printables
Toilet Tank Gasket Wrench for Kohler Toilets, 2" pipe. 62mm across flats.
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
P
Printables
MGM-18 Lacrosse Tactical Ballistic Missile
from Wikipedia: "The MGM-18 Lacrosse was a short-ranged tactical weapon intended for close support of ground troops" in my quest to replicate the missile garden at white sands, I needed to print this missile. I couldn't find a free…
P
Printables
Lacrosse LTV-THx sensor box
I made this model because I wanted a permanent spot to for the sensor to live. There is nothing special about this box other than it is sized to fit the Lacrosse LTV-THx sensors and has a ton of air circulation holes. Prior to making this…
P
Printables
Lacrosse Head Stringing Stand | Display Holder for Men’s Field Heads
Stable lacrosse head stand designed for stringing, restringing, and displaying men’s field lacrosse heads. The stand slides directly into the throat of a men's field lacrosse head , creating a stable hands-free workstation while following…
P
Printables
Wall decoration: ‘repetition of a pattern across a surface’
This is something I’ve been wanting to do for a long time; if you’re interested in modelling, read on: « I’m creating a small module (see photos) with a square base, in this case 20 mm by 20 mm by 19 mm. Using Blender’s ‘Tissue Tesselate’…
P
Printables
Men’s Lacrosse Head Quick Check Tool
This Lacrosse Head Quick Check Tool is a compact reference gauge designed to help verify the general shape and width of a men’s field lacrosse head . The tool slides into the head and provides a quick way to identify obvious narrowing or…
P
Printables
Hex Base 30mm (across flats)
Filament: Tough PLA Print Surface BuildTak (fine textured) Layer Height 0.12mm (or lower) Top Fill Pattern Concentric Bottom Fill Pattern Concentric Fill Density 100% Extrusion Multiplier 0.98 Elephant Foot Compensation 0
P
Printables
UHP-200 bracket for mounting across two DIN rails
I needed to secure my UHP-200-24 PSU across/between my two DIN rails in a Voron 2.4 build. I didn't find a bracket that provides ability to adjust the spacing between the DIN clips so I made my own. No supports needed, use M3 heat inserts…
P
Printables
Lacrosse Stick Butt End Ring
Made to be attached to the bottom of your lacrosse stick with the help of a small bolt and nut.
P
Printables
2012 Buick LaCrosse
AI generated model of a 2012 Buick LaCrosse. Made with Meshy. If you want me to create a car of your choice feel free to leave a comment and I'll make it!
P
Printables
Universal Lacrosse Stick Holder
The perfect way to store your lacrosse stick with a flush screw design and easy cliping mechanism.
P
Printables
Across the United States Insert
Insert for the board game “Across the United States” by Hisashi Hayashi, published by OKAZU Brand. More info about this board game: https://boardgamegeek.com/boardgame/277184/across-the-united-states Created using BIT (the Boardgame…
P
Printables
Lacrosse Head Display Stand
A stand for displaying your favorite lacrosse heads. This is version 1. I will likely make one with a wider base.
P
Printables
lacrosse work out attachment
It is a attachment to attach to the end of the stick and to a cable machine .
P
Printables
Lacrosse Ball Holder for Trigger Points
I made this to hold a standard Lacrosse ball so that I can position it in just the right spot on my back when I have a muscle that is giving me problems. It should pinch the ball loosely enough that you can get the ball in position, press…
P
Printables
Lacrosse Stick End Cap
Simple and quick end-cap replacemet for a lacrosse stick. Left print, even with the horizontal layer lines, is plenty strong for most users. I decided to print a 90º rotation (right) to put as much strength in as possible - and it works…
P
Printables
Aircraft Tractor, Missile Carts and Deck Equipment for 1:48 DX Chogokin Macross VF-1 Valkyrie
A set of aircraft tow tractors, missile carts, ladders and adapters for the 1:48 Bandai DX Chogokin line of VF-1 Valkryies / Veritechs from the Macross TV series and movies. The set includes: 3 numbered tractors aircraft tow bar couplers…
P
Printables
Dryer Ball and Lacrosse Ball Rack - OpenSCAD
Generalized Ball Holder I used this model for wool dryer balls in our laundry room and lacrosse balls in our exercise room. This is an OpenSCAD model that is parameter driven. Options for the model include a feeder tray to grab the ball…
P
Printables
Lacrosse LTR3 Rain sensor mount
I don't like mounting this so it dumps water on what it is mounted on. I feel it is going to cause wood rot. So I scanned in the rain sensor body and made the ring and spaced it so the cup won't be touching what you mount it against and…
P
Printables
Macross Valkyrie 1/72 model stand
This is a stand for Macross Valkyrie 1/72 model Body bracket needs to glue with Standing parts 01 Need 3 M3 screws and nuts, adjust the position you want by tightening the screws.
P
Printables
Lacrosse / Hockey / Soccer Goal Target
This design is a remix of Metric Maven's Soccer Target over on Maker World: https://makerworld.com/en/models/621959-soccer-target#profileId-546028 These are perfect for dialing in those corner snipes, when printed in TPU these targets are…
P
Printables
lacrosse face off mount for string king shaft
Used for lacrosse face off's to get more leverage.
P
Printables
Lacrosse Atomic Clock Mount for RV
Clips clock in and does not allow clock to fall off during travel but allows easy removable access to batteries. Print in PETG to avoid issues with the tabs breaking off.
P
Printables
Lego Lacrosse Stick
This model can be printed both with or without support. I got the best result however with supported turned on. Would love to see what other people have done with this design, so please post your makes, would highly appreciate it!
P
Printables
Across Dimensions – Lovers Reaching Through Time
🌌💑 Un hommage à l’amour qui défie les frontières Ce modèle mural 3D illustre deux âmes liées, séparées par l’espace mais unies par le cœur 💖. Sur deux panneaux distincts, un homme et une femme tendent les bras l’un vers l’autre, se…
P
Printables
Lacrosse Ball
This 3D model represents a regulation-size lacrosse ball designed specifically for training and goalie development. The geometry mirrors official dimensions to ensure realistic handling, rebound behavior, and shot feedback. Its uniform…
P
Printables
Airless Lacrosse Ball
This 3D model is an airless lacrosse ball engineered for safe, high-rep goalie training. Its internal lattice structure absorbs impact, reducing sting while still keeping realistic shot speed and rebound behavior. The lightweight,…
P
Printables
Drill Guide for Lacrosse Ball Scuffer/Renewer
This is a drill guide to create a perfectly centered hold in a 2" PVC cap with a 1/4" drill. Then using a 1/4-20 nut and bolt you can hold a lacrosse ball in the end of the PVC cap and use light grit sandpaper with your cordless drill to…
P
Printables
Landing Gear Lever Hook for G1 Jetfire/Takatoku Macross Valkyrie
For best results I printed it in ABS plastic, pointed up lengthwise, and tilted 22.5 degrees. However, your mileage may vary depending on your printer/plastic. Please note that his piece was only tested in a Hasbro G1 Jetfire figure and a…
P
Printables
Two Across Lid for Tea bag dispenser
Printed in PLA, 10% infill, ironed the bottom surface. Seems to fit snugly on top of two dispensers next to each other. Obviously you don't want to glue this on because you need a way to open the top and refill your tea bags.
P
Printables
℗214 Heracross Container 3D print
Printable 3D model. Heracross container. Pokemon inspiration. STL files.
P
Printables
Regal Spider-Man: Across the Spider-Verse Portal Watch Prop
If you loved Spider-Man: Across the Spider-Verse, and always dreamed of having a working Portal Watch of your own - now you can! Instruction PDF is included under 'Other Files' that contains detailed directions on assembly. BTS Video of…
P
Printables
RailCore Spool Holder to Fit 3 Across
This is a hack of a J Steve White stl to allow three spools across a 300 mm wide RailCore. It is screwed to the 15mm rail and includes a hole for a filament guide. Print one standard and one mirrored. It was specifically designed to allow…
P
Printables
Toilet Tank Gasket Wrench for Kohler Toilets, 2" pipe. 62mm across flats.
I designed and used it with the Kohler GP51487 tank gasket kit, may work with others. The nut is 62mm across the flats, I've added 1mm for clearance. After hand tightening the nut, you're supposed to turn the nut an additional quarter…
P
Printables
MGM-18 Lacrosse Tactical Ballistic Missile
from Wikipedia: "The MGM-18 Lacrosse was a short-ranged tactical weapon intended for close support of ground troops" in my quest to replicate the missile garden at white sands, I needed to print this missile. I couldn't find a free…
P
Printables
Lacrosse LTV-THx sensor box
I made this model because I wanted a permanent spot to for the sensor to live. There is nothing special about this box other than it is sized to fit the Lacrosse LTV-THx sensors and has a ton of air circulation holes. Prior to making this…
P
Printables
SR Suntour fork tool with metric width across flats
No special requirements on this print. There is no support needed and I printed it in PLA with 5 perimeter walls and 20 % infill to be strong enough.
P
Printables
Lacrosse Head Stringing Stand | Display Holder for Men’s Field Heads
Stable lacrosse head stand designed for stringing, restringing, and displaying men’s field lacrosse heads. The stand slides directly into the throat of a men's field lacrosse head , creating a stable hands-free workstation while following…
P
Printables
Lacrosse Stick large lacrosse stick keychain
This model can be used for keychains, bag charms, banquet/birthday décor. and so much more. Infill: 0-100% This model can be edited in Tinker CAD to add names of players, coaches names and player numbers.
P
Printables
Wall decoration: ‘repetition of a pattern across a surface’
This is something I’ve been wanting to do for a long time; if you’re interested in modelling, read on: « I’m creating a small module (see photos) with a square base, in this case 20 mm by 20 mm by 19 mm. Using Blender’s ‘Tissue Tesselate’…
P
Printables
Men’s Lacrosse Head Quick Check Tool
This Lacrosse Head Quick Check Tool is a compact reference gauge designed to help verify the general shape and width of a men’s field lacrosse head . The tool slides into the head and provides a quick way to identify obvious narrowing or…
P
Printables
Deathclaws - Deadliest Military weapon across Fallout Universe
fallout's most deadly predators in the wasteland.
P
Printables
Lacrosse Helmet
This lacrosse helmet was designed with ease of printing in mind, and as such is not wearable. It is however very easy to print, and looks great at small sizes or full scale. This was designed originally as a desk ornament / shelf…
P
Printables
Robotech/Macross RT Cyclone suit for Lucky13
I really liked the exosuits from nostalgic robotech cyclones. So I just tinkercaded them with lucky13's easy skins. It was fun, but time consuming. And I haven't finished the legs yet. So maybe in the summer. Also, I normally print this…
P
Printables
Hole Grommet / Liner / Filament Guide 50mm across for 32mm hole
I wanted a grommet for the foam board enclosure I cobbled together using my foamboard clips. 50MM across, 15mm deep for 32 mm hole, 24mm inner diameter. Inner hole is generously radiused to avoid snags. Would work in wood other other…
P
Printables
Lacrosse Cookie Cutter
Lacrosse head cookie cutter. I printed with PLA and 15% infill. SolidWorks file included. Category: Kitchen & Dining
P
Printables
lacrosse stick & ball holder
Will need 1'' screws and anchors to mount to the wall. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Resolution: .2 Infill: 20 Filament: sunlu PLA gray Category: 3D Printing
P
Printables
Lacrosse Stick Hanger
A wall mount Lacrosse stick holder Print Settings Printer Brand: Ultimaker Printer: S5 Rafts: No Supports: No Resolution: 0.2 Infill: 50% Filament: PETG or Nylon
P
Printables
Hex Base 30mm (across flats)
Filament: Tough PLA Print Surface BuildTak (fine textured) Layer Height 0.12mm (or lower) Top Fill Pattern Concentric Bottom Fill Pattern Concentric Fill Density 100% Extrusion Multiplier 0.98 Elephant Foot Compensation 0
P
Printables
LaCrosse BC-9009 Battery Charger Wall Mount
This is a modification of the LaCrosse Technology Battery Charger Wall Mount V2 by nm3d to fit the LaCrosse BC-9009 model charger. I added countersinks to the screw holes, shortened the bracket to account for the charger's feet, thinned…
P
Printables
Custom Lacrosse Head
I based my design on the Nike Alpha Elite lacrosse head. The lacrosse head was designed to be game/practice usable but it is possible to break the heads depending on what material you print it in. The head I printed out of nylon is quite…
P
Printables
Dual LaCrosse BC-XXXX Battery Charger Wall Mount
This remix puts two chargers next to eachother while providing wall mounting capabilities. I left the screw holes but for my installation, i used 3M command strips to mount to the wall.
P
Printables
True Chesapeake Lacrosse Logo - Plaque
I created this model for my brothers lax team, prints in separate parts and you have to hot glue them together. If you want to print the full thing in the same color I left it as the first file. I extruded the logo out and put a base…
P
Printables
Bathroom sink valet for basic utensils (Toothbrush, Toothpaste, & Comb)-Lacross Logo
This bathroom sink valet provides a convenient place to keep your morning ritual hardware (toothbrush, toothpaste, comb). It keeps these items from direct contact with horizontal surfaces that might not be perfectly clean. It has a sports…
P
Printables
Lacrosse Bookmark
Lacrosse bookmark. I have included the .stl and g-code files. Print Settings Printer brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: .2 Infill: 20 Filament brand: Any Filament color: Any Filament material: PLA
P
Printables
Across the spider-verse multiverse watch gizmo
I know this is gonna be hella useful for all the spider-man cosplay groups! If im completely honest… 50%of the work was pressing the spacebar real quick to go trough all the trailers frame by frame whenever this was on screen I made this…
P
Printables
Jetfire/Robotech/Macross Gun (ReAction scale)
I scaled down Printformers G1 Gun for the Robotech ReAction figure. I also made a new handle to fit the smaller hand. Category: Toy & Game Accessories
P
Printables
LaCrosse Technology Battery Charger Wall Mount V2
Simple wall mount for the LaCrosse Technology BC-900, BC-1000, and BC-700 battery chargers. However, I cannot confirm as I do not have this or related models. Based on a couple of requests. I just added a countersunk screw version…
P
Printables
Lacrosse Stick Wall Mount
Instead of getting rid of your old or broken shafts, turn them into wall art!
P
Printables
Stringking Lacrosse Shaft Bottom End
Bottom End for Stringking Lacrosse Shaft. Perfect with Stringking A175 shaft, but should works with other StringKing shafts too. Adjust Z axis as you prefer, but this should be good as it is
P
Printables
Across The Sea lightbox
COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE AQUÍ: correo de contacto:…
P
Printables
Hockey & Lacrosse Glove Whistle Holder
It's a pain to try to use a coach's whistle that's on a lanyard around your neck if you're wearing hockey gloves. So I made a holder for the whistle that, along with the strap of your choice, will attach it to your glove. Two versions,…
P
Printables
Radiation Shield for AcuRite, LaCrosse and other similar thermometer
This is a wall mounted solar radiation shield for a wireless thermometer. It will be compatible with devices that fit inside a tube of 50 mm in diameter. Print as many rings needed to fit the height of your device. Print without support…
P
Printables
Wall mount lacrosse stick & ball holder
Printed with 0.20mm layers, 4 perimeters, no supports required
P
Printables
Budapest Lacrosse stick holder
You can use any basic wood screws for the mounting and for the logo, you can use superglue, but I include the Fusion 360 file as well, so you can change it the way you like.
P
Printables
Robotech/Macross - Hueforge
Robotech/Macross - Hueforge The first anime I ever watched and holds a special place in my heart. Please follow below instructions: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA…
P
Printables
Wyścig przez rzekę - Race across the river
Celem gry jest połączenie linią ciągłą przeciwległych brzegów planszy. Wszystkie elementy gry należy wydrukować. liczba graczy: 2 wiek: 4 - 99 trudność: łatwa czas gry: ~15min Elementy do wydruku: Plansza - 1szt P1, P2, P3, P4, P5, P6, P7…
P
Printables
LaCrosse BC-9009 Battery Charger Wall Mount -Sloted screw holes
Maturity: Good 1 prototype. In use since 2024/02. Added some slotted holes to the nice original model.
P
Printables
Lacrosse Shaft/Head Lock
I made this shaft lock insert that can be inserted into a lacrosse shaft with worn out screw holes to help secure the head to the shaft. I printed mine out of PLA and it worked great. Can be removed with a corkscrew if needed.
P
Printables
Lacrosse Ball Sleeve
Sleeve for 3 lacrosse balls. Prints without support. Model in picture made with 0.30mm layer height.
P
Printables
lacrosse goalie
I used Tinkercad to modify the pinball goalie and add it to Stack_Jory's goalie. Printed with PETG on a Prusa MK4, supports everywhere. The remaining files for the Mini Lacrosse Game are needed to complete the game.
P
Printables
budapest lacrosse cookie cutter
just a basic cookie cutter with the budapest lacrosse stag
P
Printables
The Ball Scratcher - Lacrosse Ball Cleaner and Resurfacing Tool
Lacrosse balls typically last only 2-3 weeks with daily use. They get dirty, grimy, or “greasy” with regular play and are often discarded. The Ball Scratcher (v3) was born from my son's request to extend the life and usability of his…
P
Printables
Game Ball Alabama Shootout Lacrosse Baseball Game Ball Display Holder Tournament
Game Ball Alabama Shootout Lacrosse Baseball Game Ball Display Holder I didn't even know Champro made lacrosse balls. Found it at the MU Alabama tournament. Usually Monkey Up Lax (MU Tournaments) labels their balls. I assume to make…
P
Printables
MacrossFrontier-SMS-LogoV1
Bonjour, C'est un de mes premiers modèle issus de Fusion360 que je fais en phase d'apprentissage. Etant fan de Dragon Ball, j'ai conçu ce logo de cet univers qui m'avait fait tant rêver. Faites vous plaisir ^^!
P
Printables
Macross-UN.Spacy-LogoV1
Bonjour, C'est un de mes premiers modèle issus de Fusion360 que je fais en phase d'apprentissage. Etant fan de Macross, j'ai conçu ce logo de cet univers qui m'avait fait tant rêver. Faites vous plaisir ^^!
P
Printables
Lacrosse Sticks for Transformers
Should fit any 5mm post pretty okay. I printed it net back down with tree supports and it came out pretty good. I have a theory it would print great upside down with the handle pointing straight up but haven't tried it.
