Liczymy pasujące modele…
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- The Y-type lorry was one of the British trucks…
Tight fit, after using it for a few days I decided to fix it permanently using a small amount of crazy glue. Printed in abs and pla.
Bilder sagen mehr als 1000 Worte Pictures say more than 1000 words Category: Mechanical Toys
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- The Y-type lorry was built from 1915 until 1922 by…
The Saeco Grand Aroma Deluxe Bean Hopper Extension is a special extension for the bean hopper of a Saeco coffee machine. This extension allows the user to increase the fill height of the bean hopper and thus add more beans. By using the…
With single bags the dispenser works without problems, with a whole roll of bags I could not test it yet, maybe the dimensions have to be adjusted.
Replacement Watertank Handle for our Saeco Incanto, as the original broke exactly in the middle. The Printed parts fits around the pegs of the tank and is able to carry the filled up tank. Should be printed on the bed with supports for…
Hey! These are my homemade splash guards (mud flaps) for the door sills of the Jaecoo J7. You know how after rain or on a dirty road, all the spray gets thrown right onto the door sills and lower panels? My J7 suffered from this…
Should fit the following models: Gaggia HD8749/01 - Naviglio HD8749/11 - Naviglio RI8260/01 - Velasca RI8263/01 - Velasca RI9304/01 - Platinum RI9304/11 - Platinum RI9304/21 - Platinum RI9305/01 - Brera RI9305/11 - Brera RI9700/60 -…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- As mentioned in previous designs, the railways…
Philips / Saeco LatteGo milk container tip-over protection holder. I am using a Philips Series 5400 fully automatic coffee machine since a few weeks and i like it a lot. Especially cleaning the parts is 10x faster and easier done than on…
I printed from ABS with 15h printtime.
I have a Saeco Via Venezia and depressurised the portafilter so then I needed a tamper. While the basket is stated to be 53mm, I measured and found it to be 53.6mm. I have designed this tamper to fit exactly. The bottom is flat but even…
Because of having small cups, coffee was splashing all over the place... even with lowered coffee dispenser. Designed this cup raiser to fix even with installed milk carafe.
Can you no longer sleep well at night because you are afraid that the 3D printer will catch fire? :D Then we have the solution for you here! BW24-Cookie is an automatic, self-igniting powder extinguisher to delete fire. This bracket…
Faecrest Tower – Enchanted Fantasy Watchtower Bring a touch of magic to your shelf, desk, or garden with Faecrest Tower — a whimsical fairy-tale watchtower rising from rugged stone, complete with a cozy woodland dwelling nestled at its…
Print with snug supports. Use PETG for improved flexibility and liquid resistance. Should be compatible with Philips and Saeco machines: 800, 1000, 1200, 2200, 2300, 3200, 3300, 4300, 4400, 5400, 5500
It is the Lid for the powder compartment of Saco HD Minuto. Should fit for: HD8661 Minuto HD8662 Minuto HD8664 Minuto HD8665 Minuto HD8760 Minuto HD8761 Minuto HD8762 Minuto HD8763 Minuto HD8764 Minuto HD8772 Minuto HD8773 Minuto HD8775…
Because of the print bed of my Prusa MINI being too small for the original part to print, I've splitted the handle in 3 parts. Just press the parts together. This part is a remix from https://www.thingiverse.com/thing:3658921 Print…
The water reservoir for used water on my coffee machine always got full pretty fast. I designed a bowl that fits the geometry of the tray and can be put under the spout. It catches the first and last rins the machine does after turning on…
This model contains two parts. Main body which is 140 mm extension height and can hold up to 1 kg of coffee beans! So You don't need to fill up beans every 2 days :) Second part is cover which fits perfectly into body part and protects…
I have an old Saeco, Aroma, espresso machine. It works fine, and I like the coffee it makes. While surfing Thingiverse files, I saw several espresso funnels and tampers. Many of these were for DeLonghi machines. I figured it was time to…
pallet grating in replacement of the lost one
I fix espresso machines for a living. Some parts are just worth making yourself. This allows customizations! Support required for the tabs. Print flat side down.
Keychains in various versions. Keychains modeled after the seat belt alarm lock. Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From layer 26 For a 0.16 mm layer (initial…
The original water handle in Saeco coffee machines is always a pain in the neck. It's too fragile and won't last long unfortunately. As mine was broken, I've created the replacement spare part that fits the tank and is much more durable.…
The design is meant to be used with M6 screws from the rack. It was originally printed in PLA, which turned out to be stronger than the original material. Update : The PLA did not withstand the stress, and I encountered difficulties…
A compact 3D-printable key fob cover/case for the Jaecoo. This model is designed for Jaecoo owners who want to personalize their car key or add light everyday scratch protection. It is small, simple to print, and can be printed in TPU,…
Tested and works. This button should be compatible with Spidem Trevi Chiara and other clones. saeco-button-with-fingermark.stl - has a small circle that shows the best place to push with your finger to prevent further damages to the…
Replacement part for Saeco aroma espresso machine. I recommend printing 100% infill to avoid leakage. It's a bit chunky but it works really well. Printed mine with PC-CPE from Filaments.ca for its chemical resistance and high temp…
Saeco Moltio drawer, drip tray for brew group unit/brewing group. Suitable for the coffee machines: HD8766/01-09 HD8767/01 HD8768/01-03-05 HD8768/08-09-43 HD8769/01-11 HD8769/08-09-19 HD8778/11 ############### Saeco Moltio Schublade,…
I believe that the part number is 421944040481 ☺️
If you had a Saeco Lirika Coffee Machine, you know the problem of ground coffee accumulating at the back of the chamber. It's a annoying problem! This place has just 2 small holes. The best solution is if this place were completely open,…
Jarra para Saeco picobaristo HD8927 y compatibles. La hice para poder meter un vaso de leche y no dejar la jara siempre con leche ya que el vapor que entra a través del tubo hace que se corte pronto. Además, por la longitud del tubo…
This is a remake for Saeco coffee machines, it's more compact,resistant and cheaper for the material. Instead to fill all the cup with 3 perimeters, I used the height and range modifier of PrusaSlicer in order to make more robust and…
No support needed if printed bottom facing down
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
Leider bricht mit der Zeit der Bügel des Transponders und man kann Ihn dann nur noch lose mitnehmen. Zum zusammebauen benötigt man noch 4 Schrauben M2 x 8 Unfortunately, the bracket of the transponder breaks over time and you can only…
LoadedScissors asked me if I have a stl file for it. So I measured mine and created this one... It's without the coffee powder cup but for adjust the right grind grade it should work fine if you have lost your tool. 2018-03-14 Update:…
The Idea During my monthly cleaning of our coffee machine, Philips Saeco Xelsis, the clip to secure the milk hose to the metal pipe broke. A quick redesign of the litte plastic clip solved the problem. Print instructions A small part with…
Front water tray for Saeco Philips Xsmall expresso coffee machine
An Extension for the Saeco Vienna (and ones from other brands identical in construction like Krups, Moulinex, etc.) that makes the reservoir fit about 1 kg of beans. Ideal for people that drink a lot of coffee. You can avoid using…
Printed in PLA 0,4mm nozzle LH 0,15mm.
Portafilter handle replacement for Saeco/Starbucks Barista espresso machine. This allows for an open basket design.
This is a replacement part for the Saeco magic deluxe (should also fit the Philips/Saeco Royal --> https://www.philips.ch/c-p/RI9913_06/royal-kaffeevollautomat ) - a ~20 year old fully automated coffee machine one of my working colleagues…
Für meine Saeco Excelsis Suprema eine Bohnentankerweiterung PLA+ 0,2mm 80mm/sek Hypercube Oben abgedichtet durch Orioginalgummi durch den Deckel. Unten eine schicht Lebensmittelechtes Silikon .Die Ecke ausgefüllt das eine Art Oring…
The pipe that connects to the tubing to the milk jar dispenser head broke in our Philips Saeco Minuto. Spent a couple of minutes designing this part as a replacement. Note that the part I made have a couple of differences from the…
I printed both in PETG. I needed to scale the Pin to 94% because of the tolerances of my printer. I reused the old spring.
I have multiple coffee containers form my Philips Saeco coffee machine. To mark what is in the respective box I designed these signs. After printing them with PLA (0.2mm / 30% infill / 0.4mm nozzle), I painted them with primer and copper…
Hinge for the latch, mounted in the lid of a Waeco CCF-35/CCF-40. The original part broke, glued it twice, now made a new one that does it's job. Shaft and spring shall be reused. My latch was still ok and also put on the assembly.…
Hochbeine für Philips SAECO XS MALL hab ich entworfen um der Serienmäßigen kleinen Überschwemmung Herr zu werden. (wer sie hat der kennt das). So kann man einfach unter der Maschinerie durch wischen, ohne sie anheben oder kippen zu…
Ersatzteil für die Saeco Kaffeemaschine Ich habe es erst liegend versucht zu drucken dies schlug fehl daher dann aufrecht mit Tree Support Spare part for Saeco coffee machine I tried first to print it lying down but this failed therefore…
This model solves the problem with your Saeco Lirika's coffee machine where the brew group jumps out during extraction.This issue typically occurs when the gear attached to the brew group is warped. So, when the gear rotates, the brew…
I designed a replacement water valve piston for Gaggia coffe maker water tank. The original part broken, but the coffee maker still functioning.
Customized to hold an OpenJBOD controller board (https://forums.servethehome.com/index.php?threads/custom-jbod-motherboard.45684) and an Adaptec AEC-82885T SAS expander, with the SAS expander mounted horizontally using a PCIe reverse…
Cup raiser for 2 cups to stop coffee spilling everywhere. Tubes hanging out from the bottom ensure that the platform cannot slip. The indentations at the top ensure that the cups are in the right position. Unlike other elevators, it can…
Ersatz für einen Milchbehälter Deckel von einem Saeko Milchbehälter. Replacement for a milk container lid from a Saeko milk container. Category: Replacement Parts
I don't know why Saeco's engineers leave a gap between grinder and brew group. A lot of coffee leaks through this gap. I made this simple model to just fill the gap, and avoid leak of coffee. It's don't solve 100% of problem, because when…
Simple latch to hold the brew group in place for Philips Saeco HD8645 Xsmall super-automatic espresso maker. The housing of the HD8645 Xsmall is fairly flexible and allows the brew group to move around enough to push the puck bin out of…
Minimalist faceted caecilian, worm-like amphibian with smooth polygonal body.
Original ist irgendwann zerbröselt. Habe es also nachgebaut. Ausdruck mit PETG und ABS (beides Prusa) war, trotz Tipps im Umgang damit, nicht zufriedenstellend. Hatte Probleme mit Warping und schlechte Schichthaftung. Letztendlich habe…
Neue Version mit Sichtfenster für Wasserstand.
This is a replacement internal valve insert for the Philips Saeco LatteGo outlet nozzle . The original part is attached to a small spring inside the nozzle and controls water flow and sealing. This model replaces only the internal moving…
Are you sick and tired of refilling the coffee beans in your Saeco Vienna coffee maker every few days? If so, then you need this super mega hopper extender, to allow for a full pound of coffee beans to fit, enabling almost-limitless…
Oryginalny trzymacz rurki gdzieś zgubił się. Dlatego zaprojektowałem własny trzymacz do rurki do ekspresu Saeco Lirika OTC. Bardzo możliwe że pasuje do innych modeli Saeco, może nawet ekspresów innych producentów. Pipe Holder może…
A very basic (and low effort) small tray with raised edge to rest a coffee spoon upon. The raised edge is meant to keep dry ground coffee that is stuck to the spoon from spreading everywhere in the surroundings. Specifically I use it for…
I love my Saeco Vienna de luxe coffee maker, but I didn't have a flat/stable surface to put my milk frothing mug or extra coffee cups on, so I designed this lid. It will fit Saeco Vienna Coffee Makers (with or without the hopper extender,…
For the Saeco coffee machine, there is an option on the left side to dispense hot water. However, the water stream is so powerful that it causes splashing. For this reason, I have designed a pressure reducer. This part fits over the…
tisk stačí z PLA na standartní nastavení
Original handle is very fragile and brakes in 100% of the machines. I designed a replacement for mine.
This is a ground drawer for a Saeco picobaristo HD8927 and the rest of the models compatibles with the original one (I have only tested it on my model). I recently bougth this model as an incedible offer but the ground drawer was missing,…
JAECOO - Breloczek do kluczy
Bean funnel for coffee machine. You will need to drill (50 mms) the lid of the machine. Thanks for liking it.
A simple separater for a lunch box that does not have one. It consists of a base on the bottom and a separator shield. It separates fairly firm Print Settings Printer: RepRap Mendel Rafts: No Supports: No Resolution: 0.2 Infill: 40%…
It should fit any milk container/bottle that is up to 82mm. The tolerance is 0.5mm. So it’s 82.5mm. If using abs maybe set the shrink to 99.7%.
My original coffee doser from the coffee machine is on the edge to break, so I designed a spare just to be safe. It works awesome. I'll probably make some similar designs for moka pot. Print Settings Printer: Print Rite DIY Rafts: No…
This thing was designed to minimize the distance between cup and coffee outlet of the machine. Update: v2 was optimized for printing without support an turned around 180° Category: Kitchen & Dining
Крышка бойлера черная P0049 Saeco Talea Giro Black cover for vain boiler P0049 Saeco Talea Giro
Hi, this is a replacement part for the Phillips Seaco Xsmall coffee maker. This is part 11005727, and is the tray for putting your cup on. It is already pre-sized, in mm, so you don't have to resize it. Tips: 100% Infill Fast printing is…
Ring für den Milchschlauch
Po nějaké době začala spařovací jednotka propouštět . To by nevadilo, kdyby nebylo blbě ploché a dozadu otevřené dvo přístroje za dvířky pod spař. jednotkou. Když tam něco uteče, tak to nesteče do odkapávací misky, ale vytékalo to pod…
CATAN 3D Deluxe Upgrade Set – Community Edition By RAECA Studio https://www.instagram.com/raeca_studio/ Designed in Sydney, Australia, this project represents more than two years of design, refinement and testing. I am releasing this…
Gasket between brew chamber and output spout after ball valve. Dimensions 8x11.75 inner/outer diameter, 1mm thickness. Print TPU 100% infill. Added second version with more clearance as original was too tight a fit.
Owned my WAECO Fridge for 10 years, the hinges still cost as much as a small Fridge. Dont spend $60-$100 for a set of hinges every few years. Make from ASA or ABS & they'll last just as long but for $2 or less. Printed on P1S - %25…
This extender is meant to be put inside the Philips Saeco Intelia coffee machine beans tank to keep the ability to conveniently use ground coffee while having a tank extension. I found mine on Thingiverse, but found no such extender. Sits…
Combine two great design in to one Now you can keep your component fixed and coffee grounds contained
Da man die Standard Brompton Tüllen ohne Dreidornzange nicht mehr auf die Spanngummis bekommt, wenn man diese aus Gründen abgenommen hat, habe ich unkompliziert mit Tinkercad eine etwas größere und längere Version der Tülle gemacht. Die…
Saeco Vienna Coffe on/off button
You will need two M3 threaded inserts and two M3 x 10 mm screws (preferably countersunk head) to complete the assembly. The model is designed to be printed without supports, with the handle upside down — the two arms should point upwards.…
This is meant to replace the default Mug-Bed on the Philips Saeco Coffee machine to fit larger mugs. This part still collects excess water and coffee while being around 1.5cm lower. I printed it nearly solid to make it as watertight as…
Cracked knob is common problem for a coffeee machine, you can't ceep the original design with 3d printed one, so better to fix it. It's a tight fit model, so you might need to scale it up a bit
This adapter can be used to attach Saeco Pannarello Frother Attachment to Delonghi ECAM coffee machine.
The milk frother head of the Saeco coffee machine kept coming off and wouldn't stay in place, so I had to hold it while frothing. This solved the problem. Made a V2 version with better fit and design - if you want download the _v2 STL file.
Custom Designed SAECO Royal coffee machine replacement lids, made for a customer now available to all! I made out of Elegoo grey PLA but should work with any filament. DM for any suggestions!
This model is a direct replacement for the cappuccinatore cover used on the Philips Saeco Syntia Cappuccino series. The original chrome‑plated part is known to flake, peel, and degrade over time , especially due to constant exposure to…
