34 modeli
2024-07-25: Dust was getting in where the print slots into the CPAP. The V3 design has a much tighter fit which should help alleviate the issue. I recommend adding tape around the connection where possible. 3M 2091 filters are about the…
remix to make it fit on a shower rod
Mount your Airsense 11 CPAP machine to the wall to free up night stand space. Water reservoir is easily accessible. Incorporates hooks for holding the tube up. I printed this on my Ender 3 V2 with .28 resolution, 3 walls, 5% infill, using…
v3: Added corrected brackets for mounting with velcro or command strips, if screw mounting to the wall is not an option. They should print properly now! Get your CPAP off your nightstand! Get it on the level of the mattress, too, if your…
Wall mount for AirSense 11 CPAP machine. Holds CPAP machine very securely, very stable and strong. Mounts to wall using size #6 round head drywall screws. Simply mount to wall and then slide in the CPAP machine from the left side. The…
I was inspired by the design @InverseInduct_233286 made for the AirSense 10 to make a bayonet adapter for the AirSense 11. While still in beta I've been using/testing this and it seems to work pretty well. I'm testing ABS prints now in…
The original model was great except that I hate drilling holes in my walls. Now you can mount your ResMed AirSense 11 CPAP to the wall using 3M Command Stips. I used the picture hanging strips that are rated for up to 20 LBS (9 KGS). This…
A replacement for the ResMed AirSense 10 filter door. This is modeled after the OEM door. Model has small tolerances, and is intended to be printed on a 4k (or higher resolution) resin printer. Suggest using Anycubic tough resin (or…
I picked up an AirSense 10 as a backup to my AirSense 11 and set out to remix InverseInductor's AirSense 10 adapter: https://www.printables.com/@InverseInduct_ It didn't quite work out so I started from scratch and came up with this. I…
Airsense 11 CPAP Nightstand Shelf This model was created to help someone organize their nightstand. It holds the Airsense 11 CPAP machine on the bottom shelf in a position where the cutouts on the back for the filter, electric plug, and…
This adapter replaces the standard part that connects the Resmed Airsense 10 heated hose to the headgear. I used Dreamware headgear as the model and designed this adapter from the end of each piece to replace a missing adapter. This may…
To accommodate the Airsense 10, I needed to extend some dimensions and make some cutouts. I used a 30% gyroid infill overall, but increased it to 50% in the vertical section that may have higher stress. Probably overkill. 30% should be…
Wanted a drill-less mounting option for my CPAP. Built this model to make use of Command Adhesive strips (4 standard is what I used, 2 on each bracket). It's been in place for more than a year stably and realized I hadn't published it…
@MVasilakis_835 's original design I remixed is very well done , I've used it for over a year now. Go check his out first, it might be exactly what you need. The style of 3M respirator filter I use is round and it hits the top of my…
I have created my idea of a remote 3m p100 filter that is a huge upgrade over the garbage filter that is include with the Airsense 11. This is a must have for areas with high pollen or constant wild fires. The filter portion of the system…
Cpap machines take up a lot of space. Some people put their machines on small tables that they can put things under. That does not work for me as well, since anything under the machine would be awkward to reach. Plus, I am a very active…
A really simple model to stick on top of the on/off button on my ResMed AirSense 11 button and make it easier to press in the dark while half asleep. I used some old double-sided phone battery tape that I had laying around, but any…
These models try to solve a problem with the transportation of the medical machine ResMed AirSense™ 10. The models serve as caps for the reservoir of the machine allowing to transport of said reservoir still with water, without spilling.…
This is a hanger that perfectly fits the mask end of the hose. The mask is able to stay attached, and the whole thing hangs off the headboard of your bed. This allows for easy access and storage of the mask. I designed this in FreeCAD,…
Here are two different knob styles that will replace the lighted knob on the ResMed AirCurve 10 or AirSense 10 machines. Supports are required for the center of the knob. The included files have paint on supports where needed. Turn on…
Protects your tube from uninvited guests while mask is away for cleaning or hidden from UV light Still allows tube to properly vent and finish drying cycle Doubles as medicine cup for pils you have to take after waking up ;) If you have…
If you use airsense 10 without a humidifier, here is the ideal accessory for wall installation without the risk of falling. On the right is the mask support, at the back a space is reserved for the power supply with its cords. Printed…
Halterung für den ResMed Airsense 10 zur Montage unter einem Brett o.ä.
This started out as a way to rase my AirCurve 10 BiPap machine up about 15mm so I could use @MVasilakis_835 's 3M bayonet filter adapter with a round filter and keep the filter from touching the top of my nightstand. Go check his original…
Air filter for airsense10 CPAP to let it use North cartridge filters
As you can tell from my other recent uploads, Filters are my current focus. Went on a trip recently. Was using the single slim version of this. Felt like I could use more airflow, probably imagining things but whatevs. Decided to add…
I had the need to hang my ClimateLine Air Heated Tube for AirSense to dry after cleaning. This is my model.
I wanted the ability to use a different filter than the 3M filter.
AC Adapter rack for IV Pole CPAP Stand. Prints in two parts to eliminate the need for support. Open ends are glued to each other using CA (I used Gorilla brush on Super Glue). The stand I have: IV Stand Floor Stand, Pitch-It, 2-Hook Three…
Remix of the DIYRUZ USB CO2 Zigbee sensor enclosure. It allows reprogramming while being in the enclosure due to a specially made hole at the bottom giving access to Dupont male pin headers soldered into the PCB. Also, the lid of the box…
I upscaled the original maker's files after not finding a button cover to fit around the button of the Resmed Airsense 11 CPAP machine. This will cover the button to not allow any cats to press the button in the middle of the night!…
I wanted more filters. So I made room for 2 filters. Seems to breath in a little easier? May breathe easier on the exhale, we'll see tonight. Same base dimensions as the original filter attachment, so be sure to download the original file…
Remixed to allow use on an IV Stand. You'll need an M3x16 or M3x20 bolt and the nut that goes with it. The stand I have: IV Stand Floor Stand, Pitch-It, 2-Hook Three Leg, 30007-012 - Sold by: Pack of One…
A CPAP wall mounted shelf for the Airsense 11 optimized for ASA and configurable hooks/hanging for masks. This is a remix of Horhee's original which was great.
