Liczymy pasujące modele…
I wanted to upgrade my Ender 3 Pro to linear rails so I picked up the UniTak3D Ender 3 X-axis Linear Rail Conversion Kit from Amazon https://www.amazon.co.uk/UniTak3D-Upgrade-Conversion-Carriage-included/dp/B09M73XRBH It worked well and,…
Remix of "Aquila X Limit Switch Cover" by JordanBreitling ( https://www.thingiverse.com/thing:5446636 ). I have an Aquila X2 which I bought a CR Touch for. I had to replace the Hot end bracket with the UniTak3D bracket (…
This is a portable Meshtastic node based around the RAKwireless WizBlock with the RAK4631 Core It’s packed with features like Mag-safe mounting, wireless charging, GPS, a 1,100mAh internal battery, and a secure design using 4 M3x12mm…
Print Petg 0.15mm structural 0,4n I printed with transparent filament, chose 9 perimeter and 10 solid bottom layers. Otherwise, the default prusaslicer profile. I recommend smoothing the thread with P220 sandpaper or abrasive wool, then…
Clip to secure the IPEX-4/MHF4 antenna connectors used with the WisBlock Core modules RAK11162 and RAK3312 . The antenna cables used with the WisBlock Core modules RAK3312 and RAK11162 are easier to disconnect from the smaller antenna…
Replacement foot for a AJAZZ AK33 keyboard . I removed the soft rubber part from the broken one and glued it on the new printed one, but you could print one in tpu (there is a .stl in the raw files). there are .f3d and .step raw files…
These brackets are for the ZY-AK3 KVM switch on this Aliexpress page . Can be printed without supports if you don't mind some “plastic wires” on the upper part of each bracket. Otherwise just use supports. FreeCAD design file is included.…
You can use original screw from the bottom wheel and locknut, though you'll need to hold it with pliers to screw it in. You'll need the original drilling guide to use with this adapter. Do note that bottom right screw ends up drilled with…
This is the Sd.kfz 11/1 with a Flak38 mounted on top used for mobile anti air capability. You should use supports for the flak and hull, I have found that manually assigning support works best. This model is in 1/72 scale, if you want it…
Allows for usage of KlackEnder, no other modification required to other STLs. Offset is the same. Cables need to be fed from the “top”, might require usage of tweezers, but it is possible. I made the holes for .15 variant. Either modify…
UniTak3D Direct Drive Filament Runout Mount This is the 3D object that lets you mount the Filament runout sensor with the UniTak3D Ender 3 Direct Drive Upgrade Conversion Bracket . This is designed to work with the Original Creality Ender…
I created this specifically to hold the UniTak3D Ender 3 3D Printer LED Lights found on Amazon here https://www.amazon.ca/dp/B0B7B1QG5Q?psc=1&ref=ppx_yo2ov_dt_b_product_details . I didn't like the way they just laid in the gantry rails so…
Unitak3D sells a two bracket system to convert the Ender 3 printers from Bowden to Direct Drive. The top bracket has two positions either for single or dual gear extruders. When I changed the cooling system using Hero Me G7 I found that…
https://www.amazon.com/dp/B09M73XRBH?psc=1&ref=ppx_yo2ov_dt_b_product_details UniTak3D Rail X-axis Conversion Belt Fix with added LED Bar I got one of these kits because I installed a BLV rail kit a year ago and the rails were crap. So…
While shortly using the Unitak direct drive gantry mod plate on my Ender 2 Pro, i wanted to test how much quieter two 4020 sunon fans would be compared to the stock 4010 and 4010 turbo that came in the machine. That goal was reached here,…
Simple remix for Unitak3D Direct Drive conversion for better cable management
This is a remix from https://www.thingiverse.com/thing:4721208 Here is a left hand side piece with 3x USB and 1xRJ45. I made this as I use an OTG USB hub thingy with 3xUSB's on it: https://www.amazon.com.au/gp/product/B01JL837X8…
First I printed this model here: https://www.printables.com/model/550466-unitak3d-direct-drive-filament-runout-mount but it is not suitable for the dual gear extruder. I have designed a new one that is also a bit stronger. I printed it in…
I purchase this cheap amp online and wanted to mount it on a wall for easy access. The mount can be attached to a wall (or whatever!) with two or three flathead wood screws. I ended up only using the two top screws for my project and that…
This is a free, simple Telephone Pole based on the UK variant . This was created with TinkerCAD by Autodesk , a simple and easy-to-use software . Support is really appreciated - thank you!
Just a small 2mm panel to cover the base of the DE-10 Nano. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament: eSun PLA+ PLA+ Silver Grey Custom Section ==============…
I designed a small, fun top hat for whatever purpose it can serve! I printed it at a very small scale (3cm tall) compared to the 5cm tall file that has been provided. I printed my 3cm tall Top Hat by Zak3DPrints with Purple Silk PLA from…
I purchase this cheap amp online and wanted to mount it on a wall for easy access. The mount can be attached to a wall (or whatever!) with two or three flathead wood screws. I ended up only using the two top screws for my project and that…
I designed a small, fun top hat for whatever purpose it can serve! I printed it at a very small scale (3cm tall) compared to the 5cm tall file that has been provided. I printed my 3cm tall Top Hat by Zak3DPrints with Purple Silk PLA from…
This is a free, simple Telephone Pole based on the UK variant . This was created with TinkerCAD by Autodesk , a simple and easy-to-use software . Support is really appreciated - thank you!
Print Petg 0,15mm structural 0,4n 5 perimeters further default prusaslicer settings print 5 perimeters dimension I recommend smoothing the thread with P220 sandpaper or abrasive wool, then the thread can be easily screwed in.
print Prusament PetG 0,15mm structural infill 15% gyroid 6 perimeters CAP_print Prusament PetG 0,15mm structural 4 perimeters bottom layer full 8 I recommend smoothing the thread with P220 sandpaper or abrasive wool, then the thread can…
Very strong and expensive glue. But to use them you need even pricier dispenser so I designed a little jig, to push the glue out from both tubes close to exactly same amount Part A and Part B You dont necessarily need mixing tip, just…
Direct Drive mount for the UniTak3D Ender 3 Direct Drive Conversion gantry. I purchased this direct drive gantry to give me a more sturdy mount and then designed the direct drive mount for it. Link for Direct Drive Gantry:…
led unitak3d pour prusa mk3 mk3s+ nécessite l achat de la barre led https://www.amazon.com/UniTak3D-Printer-Embedded-Upgrade-Creality/dp/B0B3X9CKWW PETG 0.25 remplissage 100%
On my Ender 3 Pro the black aluminum spacers are a fraction of a millimeter larger than the hole for the eccentric nut in the back plate. The other 4 holes are fine just the two for the eccentric nuts might be a problem. I decided to make…
This mount is specific to Unitak3D direct extruder. It will slide on the Unitak3d base plate. Print with minimal support. No screws needed but for a more rigid installation use the m5 slot. If you do u need to drill trough the Unitak3d…
