Liczymy pasujące modele…
This is a 3D printable switch opener for Kailh Box Switches. Due to the orientation it should hold up well. Needs to be printed with 0.15mm layer height.
Not sure where my key was lost, but I made this to allow me to change settings on my Hakko FX-951 soldering Station. It will probably work on other Hakko soldering stations that use this same key. When printing this use 100% infill, since…
Remix to fit FX888 soldering iron. Uses M3 x 5 brass inserts instead of captive M3 nuts. Requires 2 x M3 12 hex head bolts. Printed in PLA as this is not near the hot parts. It clamps around the part you hold with your hand. If you print…
I simple holder taking only 1 gridfinity cube for holding 9 tips for a Hakko soldering iron.
To save some space I wanted to stack my Hakko FX-888D soldering iron on top of the station and when I saw the soldering model event I though now is the time :) For a simple version you can use the top and bottom pieces for a place to…
Compact and handy case for storing 7 pieces of Hakko T12 soldering iron tips. Added a hole in the lid to allow air to escape when closed and no closed piston effect. Thanks to XakVolt from 3ДТудей for the initial idea. The dimensions and…
A tray that can keep all your soldering equipment secured in one area. Designed to hold a Hakko FX-888D Model Soldering Iron and Station. Complete with 12 T-18 size slots for nozzle heads. A solder spool holder with varying size holes to…
I printed the detailed version with a 0.4mm nozzle and lost the second k in slicer. 0.2mm is recomended if you want full detail. See screenshots of slicer Printed on a bambulab x1 with bambulab cf-pla.
Clamp for the Hakko FX-8801 handpiece (supplied with FX-888D) from fns720 's h eat-set insert press modified to fit thrutheframe 's press for 2020 extrusion and MGN9 rail. The clamps are secured with a 40mm M3 bolt. Two versions are…
This remix is a simple change to switch out the peg with the clip feature.
Remixed the awesome TS100 Soldering Iron Ryobi by rkolibar to encase a T12 Hakko soldering station DIY kit. Borrowing also from Quicko Mini STC T12 Panel I was able to combine them into an all-in-one soldering station. The holder was…
Couldn't find something to attach to this particular Hakko model to hold my spare tips and solder. So I made this one. Category: Tools
A Simple tip holder I designed for the Hakko FX888d soldering iron. The holes are a little snug at first but inserting the soldering iron tips a few times will loosen it up.
Very simple tip holder for the HSW. Holds 14 tips. This is designed to be easily removed from the HSW when needed. All feedback welcomed.
This solder spool holder can accommodate up to a 62 mm (diameter) and 56 mm tall soldering spool and six Hakko soldering iron tips. (Soldering spool in image: Kester 1 lb/453 gram spool). Happy printing and soldering! :-)
I really liked the Tip Caddy design by stickyfox , however I have 8 tips so needed to create a new version. While this is a remix, I basically measured the dimensions used in the original and then recreated it in Onshape so I could make…
If you’re a maker, then there’s a good chance you own a Hakko soldering iron . They are a good quality iron and excellent value for money. If you own a Hakker soldering iron, then there’s a good chance that you have various sized tips…
Just like the hakko originals for the FA-430 fume extractor. I made the rectangular one to the same measurements of the original and the round one has a larger OD which helps collect more fumes. Printed from PETG @ 0.2mm layers, 4-5…
3D Printable case for the CNC Kitchen 900M/T18 (for Hakko, Lonovo, Sremtch…) Heat Set Insert Soldering Iron Tips. Compatible with: (GLOBAL) https://cnckitchen.store/products/soldering-tips-set-adapter-compatible-with-900m-t18-e-g-hakko…
I did not make this, it was created by TomB19 on Thingiverse: https://www.thingiverse.com/thing:5389850 This was removed from Thingiverse but it's too useful to not have out in the public so I am reuploading here.
A case for Hakko FX-888(D) for storage, travel and use. Can be used with either half up or down. Use together with the insert designed for this case. https://www.printables.com/model/1127938-hakko-fx-888d-rugged-case-inlay Additional…
This is a replacement key for the Hakko FX-951 soldering station. Note: If the key doesn't work in your soldering station, then the material is too translucent. Test with a flash light. If it shines through change your material or slicer…
Skadis holder for two Pinecils and a Hakko 899 tip cleaner, with a bonus tiny platform that can hold a Miniware MHP30 mini hotplate. Nice companion for mounting below the Skadis Pinecil tip holder: https://www.printables.com/model/287843…
A tray that can keep all your soldering equipment secured in one area. Designed to hold a Hakko FX-888D Model Soldering Iron and Station. Complete with 12 T-18 size slots for nozzle heads. A block of 3 holders for thin tools such as…
An inlay for Hakko FX-888(D) Rugged Case. https://www.printables.com/model/1127838-hakko-fx-888d-rugged-case
I browsed around the Printables website before designing my own holder and didn't find one that fit my needs. There are many good designs out there, but none that held the number of tips I wanted with a lid. My design has a lid that snaps…
A tip holder made for soldering stations tips. 35.59mm in height and 100mm in length that holds up to 14 soldering tips that has a shank diameter of 7mm of less.
Here's a Gridfinity-compatible bin for Hakko CHP-170 Micro Cutter. It's 4 x 2 x 2 Gridfinity units. Features: custom fit. Fits the CHP170 perfectly but no other cutters. snug – the cutter's spring holds it in place cutouts for your…
Just a simple, quick holder for Hakko soldering iron tips. Printed with PETG, no supports. Easy-peasy. The case is non-magnetic, so some double-stick tape is needed for mounting. There's a flat spot on the back for that.
Basically a GridFinity (by Zack Freedman) holder for Hakko Heatset or soldering tips.
Holds up to 9 nozzles for the Hakko FR-301 desoldering iron. Two versions: hakkodesolderingtoolholder.stl - Standard nozzle holder magnetichakkodesolderingtoolholder.stl - Allows for 2 10mmx2mm magnetic disks to be placed under each…
Stand for Hakko FR-300m desoldering gun designed to be used with the included heat shield. From thingiverse https://www.thingiverse.com/thing:3407762
I took the statement by the original creator that he wanted it to be easily removable form the wall one step further and made it two separate parts. The cup mounts to the HSW securely, and the holder sits in it and can easily be picked up…
Printed PLA .2 layer no supports and all parts should be positioned to print. Make sure you print 2 side rails and 2 rod pins. My printers tolerances are pretty tight but I did have to hit one of the side rails with sandpaper very…
After you have ascended and bought the based chisel tip you may be looking for a place to put the conical tip, (no not the bin). This clip offers a neat solution without losing the tip cleaner. 3, 5 and 8 tip variants in both left and…
If you use the Multiboard system and have a Hakko Soldering Iron, this is a must have. Hang your Hakko on your Multiboard using the Multiconnect system…
This has been updated to a newer version with some parts lists. https://www.printables.com/model/194318-quicko-ksger-hakko-t12-clone-soldering-station Of all the good designs out there for Hakko T12 soldering iron clones I liked buildxyz…
Any layer height Any filament Supports recommened
adapter for using T12 tip on pinecil, with knurled grip. use it along with pinecil mosfet saver from chestwood96 for double protection https://www.printables.com/model/97073
The tester board you can find here: https://www.printables.com/model/1256858-tester-board-for-cherry-mx-switches Heights of the inner Keycap Stems Flush: They are flush with the bottom (can touch it) when pressed down. Close: They are…
I decided to remix my own design and make it cleaner and more convenient for me by integrating a battery adapter to use the DeWalt 20V ecosystem since I have a bunch of them. This way I've got portability when I need it. One of the things…
BOM: 1 - M3 x 40 SHCS 1 - M3 x 10 SHCS 2 - M3 heat inserts 1 - M3 Thumbscrew by Elothan 1 - 2x6mm O-ring (optional) Printing Tips: No supported required. Hinge prints in place, and will break free when you close the mount after printing.…
Replacement for the B2972 control card, used by the FX-951 and other Hakko soldering stations. This version of the card is much lower profile than the original, so that it only sticks out of the station by a mm or so. I prefer this for…
This magnetic tips holder for the soldering station Hakko FX-888D was inspired by amcanhazdeath's Hakko Tip Holder . The Hakko FX-888 was elected as Japan Design Selection 2009 according to Hakko's official website . Here is my attempt to…
I had additional tips I needed to hold so I remixed this by Paul Arden .
---Alpha2 version-- If you try it, please send me feedback. If you make a public comment, perhaps mark it as “alpha2” so people seeing finished versions know that the comment is applies to an early version. Uploaded 3MF this time, no STL,…
This is the cheapest way to get affordable solder (approx. 15 EUR). You can buy the kit here ( aliexpress.com ). Once the kit is in place, you can print the box with the stand. Insert the solder PCB board into the box, the opening in the…
Original design has cracked and I've made this a much beefier model. But I don't recommend this or similar designs, because you can easily break bottom tip which is not made solid Print Settings Printer: Anycubic Chiron Rafts: No…
Got really annoyed with the tips for my soldering iron tipping over. This is a better solution to store these tips. May be a bit tight depending on your printers calibration. May be worth scaling to 110% Soldering Tips:…
Just like the original Hakko B2756 but you can print as many as you need now. I printed with 5 walls, 0.2mm height and 80-100% infill to add some weight to it. I debated adding a lead weight to it but with the tips in it it has enough…
Hakko FX-888D soldering station modification that provides a way to hold solder and extra tips. Easily mounts to soldering iron holder for easy access to solder and extra soldering iron tips. Cleaning brushes and soldering iron holder are…
3D Printable case for the Slim Tip CNC Kitchen 900M/T18 (for Hakko, Lonovo, Sremtch…) Heat Set Insert Soldering Iron Tips. Compatible with:…
This is a cover to replace the netting that originally came with the duct nozzle on the Hakko FA-430 fume extractor.
Simple holder for extra soldering iron tips. This one was made specifically for the diameter and length of Hakko tips, but may work for other irons. The holes are 7mm in diameter. The Hakko Soldering Iron Kit I use this with:…
Simple holder to fit 12 Hakko T12 tips
The sponges I used to buy expand by about 10% on the plan. The right template for me is about 90% of the original size. You can customize your template using the OpenSCAD script available to download.
Note: This is a mirror of a Thingiverse post , originally published August 22nd, 2021. When used with the Hakko 'anti-bacterial' sleeve, this adapter allows you to use Hakko T12/T15 soldering tips with your TS100. This works because the…
For this press: https://www.amazon.com.au/gp/product/B077LPTD2T https://www.amazon.com/DASBET-Universal-Adjustable-Workstation-Workbench/dp/B0CPJ1JCD1
We wanted multiple positions for fume extraction at our maker space workbench so I designed a Y-Splitter for (Hakko Loc-Line): https://hakkousa.com/products/fume-extraction/999-205-01-loc-line-kit-with-round-nozzle.html I made multiple…
A two-piece swivel hanging mount for the Hako FA400 / FA-400 Fume Extractor / Smoke Absorber. Slots for zip ties and holes for screws. The mount comes apart so you can easily unhang the fume extractor and use it in a different location.…
I really like the Stealth Press by IconicFab, but the supplied mounts didn't fit the large barrel of the Hakko FX-600. Since IconicFab thoughtfully supplied the step files, I modified his largest design to accommodate it. The FX-600…
Remixed for following fused socket switch: https://www.aliexpress.com/item/32798405330.html (only rear panel differs from original design) Category: Electronics
Hakko style soldering iron mount for Heat Set Insert Press model
MHP30 stand for Hakko C1390C Omnivise PCB Holder
HAKKO Soldering iron FX-600 Fixing device
Small stand to hold nine Hakko T-18 soldering iron tips--versions with and without threaded dust cover. There are three targets on the bottom of the base to adhere bumpers from McMaster-Carr .
A 1x1 gridfinity tray for Hakko T18 soldering tips.
The Hakko 936 is a time-tested design and spare parts are plentiful. I prefer analog controls over buttons, so I put this together with a transformer I salvaged out of a Weller station. This case is designed to be ABS-friendly. You can…
An anti-skid bottom plate for the Hakko Omnivise C1390C PCB holder that also prevents scratches on delicate surfaces. The 3D print consists of the bottom plate on which some rubber feet can be glued. These rubber feet can basically be…
HAKKO FX-888D Holder (2 Part Version) Combined the vertical piece and the main base of the model by cluckOmatic and moved it a bit farther away from the main box. Horizontal piece is unchanged. I quickly meshed these two items together so…
I had this idea that I wanted something to keep my soldering iron base together with the brass sponge holder. For whatever reason I had decided that it was entirely too much hassle moving these two objects separately so set about…
Xfinity Portable Soldering Iron - Hakko T12 Model to use Aldi Xfinity battery with Hakko T12 soldering iron kit Hakko T12 kit https://www.aliexpress.com/item/4000577553855.html Requires 3 x M3 x 10 bolts + nuts…
Print at as high a resolution as you can to get the best results on the fillets. Resin might be a good option. I hit mine with a 1.5mm drill after print to make a clean channel.
Printed with 0.6mm Nozzle at a 0.4mm layer height, and has magnet holes to connect to gridfinity baseplates. Made using a base bin model generated from kennetek's openscad gridfinity rebuilt program. Holds 5 heat insert tips.
I needed increased height of the PCB holder so I created a taller base. I created two versions, one with slots (similar to the original) and one with only holes that prints without supports. The OpenSCAD file is included so you can revise…
This pack model for Hakko T12 2024 rev. Used Fusion 360 for create and based on aliexpress block for Hakko T12. M3 nut and M3 screws for assembly.
It is a remix of https://www.instructables.com/DIY-Digital-Soldering-Station/ https://www.thingiverse.com/thing:4774442
This is remix for upgraded soldering station, consists of two independent tools: Hakko T12 + Power supply: https://www.aliexpress.com/item/32836960037.html + https://www.aliexpress.com/item/32705213467.html 8858 Hot Air Gun:…
It took a few iterations to get the right thickness and dimensions, designed from scratch to get the smallest footprint possible. At the time I only had a light filament so i first tried to darken the filament with a sharpie which didn't…
Two bins that fit inside the Hakko FR-301 Desoldering Tool Case. No covers, but they mostly seal against the lid of the case and they definitely keep your spare parts from bouncing all over the case. Print in your choice of high…
A remix to hold 9 tips instead of 5. Tweaked the dimensions for a better fit. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: ESun ABS+ Notes: . Category: Tools
The T12 soldering iron doesn't fit correctly in the Hakko FH-300 soldering stand as it sits at an angle and the tip of the soldering iron will touch the bracket inside the FH-300 stand. This prevents that from happening and allows the…
Previously I designed a cover for the top knob or screw that is used for tightening the Hakko Omnivise. I designed it so that my skin moisture wouldn't cause any undue rusting. I kind of missed on that first design as you had to take it…
The Gridfinity model for soldering station HAKKO 936 (and other names for same 936 station). Consists of two parts - cutout for station and cutout for the soldering iron holder.
I have a Hakko 611-2 dual solder spool reel and I love it so I created this printable version. Like the Hakko stand you can reverse the wire guide on the bottom spool so the stand can be used from the front and the back. Printing…
A magnetic tip holder for Hakko FX-888(D). Additional parts Eight 6x2 mm round magnets Printing Pause at beginning of layer 67 to insert magnets when printing at 0.2 mm layer height.
This is a 2x2x3 Gridfinity bin that holds a standard roll of solder, as well as 16 Hakko solder iron tips. With my tips in, it is about 7U in height. I'm including the SCAD file if you want to make modifications to the model before…
Printer Brand: i3 MK4 Rafts: No Supports: Enabled Layer Height: 0.2mm Nozzle Diameter: 0.4mm Material: PETG
I wanted to fix the position of the duct that runs from my Hakko fume extractor to the wall. It's a reasonably snug fit onto the duct but seems to work well enough for the task. You need to slide the part down the duct to your desired…
Lötspitzenhalter für Hakko FX-888D Lötstation. In den Halter können 3 Ersatzlötspitzen geklippt werden. Drucken mit der Unterseite des Halters auf dem Druckbett.
Cover for the Hakko FX-600A soldering iron with magnetic (optional) attachments. Set a color change at the top of the magnet holes (3.6 mm layer height) to fit three 6x3 mm neodymium magnets (from Daiso Japan ) during the printing. These…
This tip holder fits into the stand for a Hakko 936 (Hakko 907 & Hakko 908) soldering iron. Fits nicely into the relief on the side. Category: Electronics
Insert for holding soldering iron tips.
I made this part in openSCAD, it fits perfectly. The solder can be quite close to the hot iron so keep an eye on that!
Heatset insert pusher for HAKKO soldering iron.
If you're one of those folks who is able to rust a tool simply by touching it, you might find this useful. It covers the tightening knob on the Hakko Omnivise so that when you invariably find your hand resting on it, you can rest assured…
I'm just a big fan of AG! Also, this model uses 30mm by 1mm magnets
Compact solution for a soldering iron holder and tip cleaner. Recommended for smaller, USB-C soldering irons like the Pinecil in the picture. Uses 2x 608 Ball Bearings from a local skate shop to isolate the heat from the soldering iron.…
V3D has a nice improved version of Adafruit's Heat Set Insert Press: https://www.youtube.com/watch?v=ZkJdiu_l0eo His Github with the STLs and the list of materials is here: https://github.com/AdamV3D/Threaded-Insert-Press/tree/main But I…
