1726 modeli
3D printed palm ratchet knob (stubby screw driver handle) Print-in-place : Just print, and you are all set. Assembly work is not necessary. Durable ratchet mechanism : Tapered ratchet gear makes it not only easy to print but also sturdy…
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Plastic snap clips on the wheels of the Hart 20V stick vacuum break very easily. I couldn't find any replacement part numbers online, so I made an exact copy using SolidWorks. Attempted to beef-up the snap mechanism for a hardier wheel.…
Wydruk około 2,65 €–3,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Salmon : Fish
Wydruk około 17,83 €–21,80 € nettoWstępna wycena jednego wariantu
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
My girlfriend had several used lip balms that either had missing caps or loose cracked caps so I decided to revive them with some 3D printed replacement caps! The model is quite basic, just a hollowed cylinder with some fillets. This lip…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
A box for Analog Devices Adalm-Pluto SDR with "Clock in" SMA connector for external Clock source. In near future there will be diffent bottoms of this box with USB holder, mounts to tight this box down. If a change is needed to this…
Wydruk około 3,56 €–4,35 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Zalman Z3 Plus HDD rails Yes support PLA
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
Easy to make a cute Dalmatian/Dog keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
This is a remix of Thyn's Radius Gauge for calipers. Initially I just added some nice fillets and made sure it fitted my plastic calipers and when I tried it I saw that a 38mm diameter cylinder yields a measurement of 7.9mm. Multiply by…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
These baseplates replace the stock baseplate and integrate a bushing for use with templates. I use these for engraving bits which don't have bearings. It can be hard to see what you are doing with dust extraction so I printed one in…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena jednego wariantu
I designed this model to house an ADALM Pluto in. The native ADALM Pluto has no mounting arrangements, so if you need to include one in your project, this case fits it very snugly. It has the added advantage that the micro USB connectors…
Wydruk około 4,21 €–5,14 € nettoWstępna wycena jednego wariantu
Improvements in the 3D Cricket Key Design: Advanced Bit Locking : Instead of the bit passing through the wheel, I have redesigned the wheel with a wider central space and a separator. This allows the bit to snugly fit and lock from both…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
Had my daughter draw me a holiday palm tree we could make into an ornament. Printed in PLA with 6 color changes, must be printed at 0.2mm layer height. If you like these files post a make and send a cup of coffee by hitting the donate…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
Sweet, now my tactical chapstick's got a new sheath* to replace the one that got smashed! * Sheath, cap, whatever you want to call it. Its purposes are to cap the container's end and to guard the adjustment mechanism. Unlike a typical…
Wydruk około 0,71 €–0,86 € nettoWstępna wycena jednego wariantu
Printed in Prusament PETG Prusa Orange 15% infill .15mm layer height and 6 perimeters with support turned on. Screwdriver bits fit snug, may want to scale up slightly for easier bit swapping. Included bgcode file for Prusa Mini+
Wydruk około 1,18 €–1,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a small holder for lip balm and eye drops to keep them organized by your bedside. I printed it in a glow filament so they're always easy to find at night. Design parameters Small slot is 20mm diameter and 15mm high (product shown…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
A colored ring to identify a bottle from several identical bottles (for example in kindergarten) DM Babylove Trinkhalmflasche 330ml Print settings: 0.2mm layer height 0.4-0.6mm nozzle diameter no supports 100% infill PETG is recommended…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Coin with an open palm engraved in it.
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
Remixed to include holes for SMA connectors. This was done to accommodate Clock In and Out in support of an amateur radio station for QO-100 satellite. The model that was remixed is not quite a perfect fit for the version of the ADALM…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cut frame in the middle on 2 or all 4 sides, depending on which dimensions need resizing. Slide the expanders over the first cm or so of the cut ends of the frame, with the decorative art facing forward Place your artwork in the frame…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Hello all, here you can find a set of different inserts for an IKEA ALEX & MALM office cabinet . I love to organize and have been inspired by Alexandre Chappel in the creation ( Youtube ). He created the inserts for his homemade drawers,…
This model has become very popular on TikTok, and I've received numerous requests to make the files available for print. So here you go! This is a Stanley tumbler shaped lip balm holder which prints in 4 pieces (must be assembled). The…
This is an adapter for the Snapmaker U1 to use an IKEA Samla 45L box or a Walmart Sterlite 55L/58qt box as a top cover. It is meant to be a simple but very functional design. You can slide your box back for ventilation. No need to remove…
Palm brace (splint) For fixating the wrist and palm (metacarpal fractures). The brace must be shaped into a neutral position, to prevent the shortening of tendons and ligaments and placed on the FRONT side of the forearm (see picture). If…
I remade the model
This modifications of the original prusa MMU2S extruder, were the only way i could make it work properly (for me). It has been really frustrating months, there is a lot of ideas you can find searching in forums, i tried all of them and…
Upload of almost every Toon just incase the maker world controversy is true and to make the Dandys world models more accessible
18/12/2024: Well if you are into Dodge trucks chances are you are not looking for a french car (!) But anyways you could give a look at my new model the Peugeot 3008 RC chassis and body . 08/11/24: Added a missing STL in the gearbox:…
Improved rev 1 | Original model sized for Burts Bees sized tubes (approx. 67mm long by 16mm diameter) with some nice improvements: Model is a little sleeker near the keychain loop. Uses a little bit less material and prints a little…
Bring the serene beauty of the desert into your home with the Sand Palms Vase . This stunning piece features an intricate design of palm trees etched delicately into its surface, evoking the calm and elegance of a tropical oasis nestled…
After creating some more complex models/containers with threaded attachments and supports, finally came up with this simple and less bulky design. The smaller cap goes into the larger portion. The larger part attaches to the top of the…
A palm tree for tabletop gaming and a nice addition to the tables vegetation, which can be used in different scenarios like desert, jungle, swamp, alien planets, ... The palm tree consists of three parts , so it can be printed without any…
Meet Kapi, the king of laid-back vibes and quiet confidence. Whether he's hanging out on your shelf, Kapi brings peace wherever he goes. With his soft shape and zen attitude, he’s the kind of buddy that reminds you to take things slow and…
A DIY portable cyberdeck designed to work with any smartphone up to 13 mm thick, the Modular C‑Deck builds on the original Pixel 3 XL NetHunter C‑Deck with a fully modular design. It features a replaceable phone insert , making it easy to…
Create you Star Wars Ep. IV - A New Hope - Trench Run framed WallArt. You'll need a picture Frame from IKEA (RÖDALM, 54x27 cm), and double sided adhesive tape (or glue). Print 40 Tiles (in any combination to your liking) of the 12…
Not much more to say, you know what a cookie cutter is! But look how cute the bunnies are, they really love their almonds, will you have the heart to eat them? You can even make stopmotion gifs! Please don't eat cute cookie bunnies, make…
While working on a project recently, I found that I couldn't easily find metal pins of the exact length I needed, and I didn't have the tools to cut them to size. I did, however, have plenty of PLA filament that was the right diameter!…
Jarra Chop totalmente editable en f3d y step con stl para imprimir para vaso de aluminio 600cc Impresion en PLA o PETG Sin soportes
Companion project to my other parametric configurable FPV designs: Pod | O4 | Frame Whoop Action2 , 3-5 AcePro GoPro Mini Hero 9-12 Antenna Mount Protect your O4 Pro/Lite camera with TPU in front of the lens for maximum protection but…
My take at making the famous robot dog Spot. Uses my gen#4 ball joint design. Gen#4 is gen#3 plus a small plate covering one side of the hinge, making it more discreete. You may have to unstuck it with a little twist of screwdriver…
Of all the filament clips I have received and printed, I have always been happy with the filament clips supplied by Sunlu although they are not compatible with all brands of filament. That is why I've made a Filament Clip from Sunlu's but…
The popular Ikea Samla bin was not easily available in my area, but it was easy to purchase a Sterilite 55L/58Qt plastic bin from a local Walmart. I used the original model from the enclosed link and remixed it to fit the Walmart…
Use this divider to separate your Ikea MALM drawers into separate spaces. This can be useful if you have your socks, pants and tops in one drawer but don't want them to mix up. You need a build plate with at least 213mm length. No screws…
I didn't make this scan; I found it here https://www.myminifactory.com/object/discobolus-at-the-british-museum-london-7896 (BTW their Scan The World program is fantastic!). I believe this discobolus is a modern retake because the head…
If you have a Snapmaker U1 and you use an IKEA Samla or Walmart Sterilite box as a top cover this might be for you. This build plate holder should work with most of the top cover adapters out there. I even made extra high versions if your…
IKEA Malm-inspired chest of drawers for your dollhouse! With removable drawers. 1:12 scale.
Was looking for a good fan duct with 360° cooling and good nozzle visibility of Kobra S1 and decided to make this one for upgraded hotends (with ceramic heater). The model is easy to print with or without supports (up to you). Please…
Simple Palm Tree Key Chain/Tag (Dims: 2.5" H x 2" W x 0.125" D). It can be printed with the palm tree facing either side.
Any feedback would be greatly appreciated . Nozzle: 0.4mm Layer: 0.1-0.2mm (Recommended) Add a some small Cylinders as Negative Volume for draining No Supports needed Scale it as you like :)
About the model IKEA Malm drawers are around 70x42 cm. The drawer has been devided into a 6x6 cm grid leading to a total of 12x7 elements. Because of the square grid each insert can be rotated as needed. Elements are provided from 1x1…
-58g with holes / 63g without holes. Weight will vary based on battery and print material. -Wireless using G305 Internals -Rechargable AAA via magnetic microusb tip -Designed for FDM printing -No soldering required FREE THINGIVERSE TEST…
I designed a super simple remote Holder for my Ikea Malm bed. It was designed for a Amazon Fire TV Remote and a Samsung TV Remote. Feel free to remix it or to change it to your needs ( to your remotes ). In the picture it was printed with…
A hand tool to facilitate inserting magnets into Gridfinity stuff. Insert the magnet into the bottom of the handle, use pliers (or anything pointy) to push the magnet all the way in the back. I've included two handles with “BASE” and…
Saw a lot of bin covers that were overly complex, and I just wanted something quick and easy until the official cover is ready for release. These are just some simple mounts to keep the bin (Sterilite 58 quart from Walmart) securely…
Most design seems to have the “hook” part further down, leaving the part that goes into the board visible. I put the hook at the top and then whatever hangs there usually hides the bottom part of the hook so it's close to invisible…
Lip balm container for holding 4.25g lip balm tubes, such as Burt's Bees . Features a 90 ° twist top for secure and easy carrying. Dimples on the top section indicate where the locking lugs are located. Keychain rings can be attached…
Easy and fast print. For the joint just insert some filament(1,75) . Perfect to use up the almost empty spools! Give it out on parties, it's a great conversation starter!
Two quick leafy panel bookmarks I threw together. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .15 Filament: AIO Robotics PLA Category: Office
I DID NOT MAKE THESE MODELS!!! These are official STLs from Finalmouse and are listed on the Finalmouse website for free download and use . These models are just for testing the shapes and feeling if they're compatible with your hand size…
This is the 20mm version, should be able to scale up as large as needed.
This is a dead simple, palm sized watering can with extra long watering tube for accessing tight targets. I printed mine from eSUN ABS+ with 0.2 mm layers, 4 top / 4 bottom / 4 perimeter layers, 15% gyroid infill. No support neccessary.
The size of the bar that the dispenser hangs from has changed on newer pick carts from 75mm (2.9") to 87mm(3.4"). So if your store gets new carts you may need to download the remix by Crazy Asian that has been modified to account for…
Hello, Fan duct for flsun super racer no supports!,
Palm tree earnings is remixed from nonikatz 's Palm Tree. (Thing:365956) Modified using Tinkercad and features found in Prusa Slicer 2.1 to get the model flat.
Inspired by the MALM bedroom series from IKEA, this bedroom set was designed for LOL dolls (fits well 10cm dolls). Includes the following models: bed with space for two drawers small drawer for the bed (print 2 of these) chest with space…
Disclaimer: it doesn't really shoot that far but im currently trying new ways of improving it IMPORTANT!!! The 3 magazine parts are in the bottom right of the stl, the three trigger parts are in the top right, and the 2 shell parts are on…
A little storage container that fits well into the Malm Drawer. It has a tight fit, but is still loose enough to slide it back and forth. The inner container size is about 15 x 11,5 x 4 cm
CROCS Strap Pin Set (any color you want) I have some white CROCS with a black pin, and wanted a white pin. I used a white paint marker to cover the black up, but this is better now. You can print in any color of PCTG. I designed them to…
## Design Concept The palm nunchucks are designed for stress relief and casual fidgeting. The compact size allows for easy handling and is suitable for quick routines while multitasking or relaxing. ## Uses This fidget toy is perfect for…
While the original Ball vise is fine for those with a selection of hardware on hand, that's not me. So instead of buying a bunch of bolts and such, I modified the files so everything can be printed, except, of course, the silicon tubing.…
Simple reimagining of the Pendiente Palma Earring design. I took the basic shape and stacked it. Looks great with tri-colored filament (Copper-Gold-Blue)! 2 earring designs are meant to be printed per earring and glued back to back (base…
Printed in PLA+ with standard settings.
A tray for the various tokens, dice and event cards (without sleeves) for the Awaken Realms boardgame “ISS Vanguard".
This my version of the Calm Buddi turtle, manufactured by Defy Designs - https://www.defydesign.org/calmbudditurtles. My version has two shell options: 1 - ridges inside and a standard turtle shell pattern outside 2 - My Humps Edition has…
Lovely beach with a realistic coconut palm tree. A coconut has dropped and is lying on the beach. Inspired by a real australian coconut tree. The trunc is wider at the bottom for maximum stability in the loose sand. Please find detailed…
I wanted to design a phone case for the rather rare realme 8. I included several files in case you want to modify the case. I printed mine with TPU but PETG might also work. I recommend using supports on the headset port. Feel free to…
This is a customizable (parametric) 3D printable writing aid. The Palm Pen Holder makes it easier to grip a pen, pencil, or other writing utensil and may be useful for someone who has difficulty holding a pen or pencil directly. The…
A quickly designed JJK themed pencil holder. May be a little too large for standard pencils/pens I would scale down if I printed again lol.
En pokal til vinderen af mandelgave 2022. Lad mig se nogle print. Let me see some prints.
Super simple print and can be scaled to any size. Supports may be needed, I used tree supports. Pun intended.
Modelo 3D do escudo do Palmeiras, perfeito para torcedores que querem demonstrar sua paixão pelo Verdão. Este arquivo STL é totalmente escalável, permitindo que você ajuste o tamanho conforme sua necessidade, seja para criar um chaveiro,…
This is a card holder for the boardgame "ISS Vanguard" to be placed on the left top side of the Planetopia book.
Printed in PLA with 0.2 layer height and 10% infill. Once the two boxes and the lids were printed, I glued them one on each side. I joined the lids to the boxes with plastic workshop tape acting as a hinge and it worked perfectly. The…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre A tropical palm tree growing on a tiny island – a…
I called this pen the Alma Fountain Pen because I made several iterations (this is the 4th one) but the soul (alma) was always the same: an easy to print fountain pen body, section and cap, compatible with Jowo #6 nibs (popular and easily…
A mount designed to securely hold a Philips PicoPix Max or other pico projector on the headboard of an IKEA MALM bed. Requires absolutely no tools or assembly and rigidly mounts on the headboard of the bed via gravity alone. The PicoPix…
this clip holds an led strip at the wall. It has been modelled for an WS2812b strip that is in a silicon tube. the tube measured 12mm x 3.6 mm, the clip leaves even a little more space so the strip goes in without use of force. They are…
Don't lose your lip balm! The temptation is real: twist that little dial on your lip balm or lipstick to extend it, then twist it back. But, I'm sure you or someone you know has experienced the time when you twist it just a little too far…
Original model is by fabbio84 : https://www.thingiverse.com/thing:2922171
This is a big gridfinty baseplate. I printed mine on my Anycubic Kobra 2 Max with 42x42x50cm build volume.The 10x10 and 10x7 fit perfect for my ikea malm drawer. Have fun and don't forget to post your makes :-) Check out my other designs…
A simple mid century modern Malm fireplace. Modeled after the 34" Malm, made for 1:12 dollhouses. Printing No supports needed. I printed this with 20% infill and a wall thickness of .8mm, wall line count of 5 because I wanted it to be…
Benutzung auf eigene Gefahr. Sollte aus PETG gedruckt werden. (Spülmaschine) Schichthöhe: 0,1 mm. (wasserdicht)
##English## Here is my almost completely printable 10 inch rack from 3U-5U. All parts fit for the P1/X1 Bambu printers, 6U would not fit anymore - and here I would go for a finished rack for stability. PLA or PETG works, the example with…
These Baseplates fit tightly into the IKEA Malm Drawer - the small one which fits neatly besides your bed. They have a little corner at the side, so the bins will have a little gap left and right (and in the back). The gap is similar on…
An authority counter meant to replace the stock set of 18 authority tracking card in the Star Realms card game. The counter fits in the base game's deckbox (with the authority cards removed). Print instructions Supports may be necessary…
Cats are about comfort, closeness, and quiet presence. This freestanding tabletop sculpture is inspired by traditional woodcarving and shaped to feel calm and intimate rather than decorative or loud. It’s designed to stand on its own — on…
