Liczymy pasujące modele…
A mount for a 5015 fan in combination with a correct adjusted fan duct. Its made for Artillery Sidewinder X2 (maybe it is also compatible for X1 and Genius Pro). It's made of 2 parts - a front and a back part. Both are easy to print (but…
CZ : Kamarád mě požádal o nakreslení a vytisknutí jednoduchého krmítka pro andulky podle vzoru které používal 8 let. EN: My friend asked me to draw and print a simple bird feeder for budgies based on the model he had been using for 8…
Spending too many hours in front of your computer without moving? StandUp Reminder is a simple, compact 3D-printed timer that helps you remember to get up every 45 minutes, promoting better posture, circulation, and mental clarity.…
You must DISABLE automatic supports in cura, and print with only custom supports. 4010 and 5015 fans must be 24V. I used manual supports in PrusaSlicer. Auto blocks the air ducts. This really improved my airflow, and eliminated the sag on…
lavanda, lavende, lavender, levandule, lavendel, casia - print at least in PETG because of UV
table { border: 1px solid #c4c7c5; border-radius: 4px; font-size: 16px; } th { padding: 18px 16px; text-align: left; } td { padding: 16px; border-top: 1px solid #c4c7c5; } .katex-mathml{ display: block; text-align: center; } .katex-html {…
Redukce pro cívku filamentu LANDURedukce pro cívku filamentu LANDU pro tiskárnu MK3S+ cívka se lépe odvíjí než na papírové cívce
rámeček pro zrcátko do klece pro andulku
Improved FLSUN V400 Fanduct Note: Fans are glued to stock fanduct but they can be peeled off easily with a cutter blade. Edit 05/11/22: New Fanduct allowing an overhang of up to 70/75° to be achieved
After I made the double sided standup sign , I realized the signs are a bit cumbersome to put away as you can’t fold them well. So I came up with this model which can be fully folded down. The sign has only a single side for the text to…
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
BiQu H2 fanduct for a single 5015 fan Parts Needed: 2x M2.5 x 6 countersunk screws 2x M3 Nuts 2x M3 x 24 screws Printsettings: Layerhight: < 0.15mm Support Needed BiQu H2 fanduct for a Dual 5015 fan Parts Needed: 2x M2.5 x 6 countersunk…
I adjusted it to fit 220 x 220 mm beds. You can print it directly for these dimensions. Scaling is needed for other beds. If you have more time and your bed level is perfect, you can enable ironing mode.This will make the surface…
Construction note: This is assembled in 3 main parts (not counting the sheath). Modeled so it is held together with an optional 6mm rod running from the pommel to the crossguard (150mm). The parameters are purposefully tight so everything…
This is the shard attachment and sheath upgrade to the Anduril/Narsil dice blade. You will find the original blade and the rest of the parts here: https://www.printables.com/model/335226-andurilnarsil-rpg-dice-blade
FLSUN V400 Fanduct for 4010 fans. I recommend this fans (24V Ball 12000RPM) : https://fr.aliexpress.com/item/32798634077.html?spm=a2g0o.order_list.order_list_main.13.21ef5e5b8i2sK2&gatewayAdapt=glo2fra
Gedruckt mit PLA Düse 0,4 mm Schichthöhe 0,2 Keine Stützen erforderlich
Contributo ai vari sistemi fanduct VzBot in abbinamento con i sistemi Klicky Probedi Jlas1 e Quickdraw di Annex effettuando delle modifiche in modo che i due sistemi si fondono in un unico componente. I sistemi sono stati testati su…
The parametric Autodesk Fusion file can be modified to fit your exact fan size. Excluding the air blocker plate, the model prints in four different pieces. STL files and hardware: Fit 80x80 mm and 120x120 mm fans. To mount the fans four…
This model is heavily inspired by the amazing Mini Floor Stand by muzz64. It is not a remix however as I made the model from the ground up and came up with a simpler design that also has tighter clearances in the hinges for less wobble.…
Made some remix,and modify a 14cm version
I was really looking for a good fan duct for the Bondtech BMG setup on my CR-3D C1. https://www.cr-3d.de/unsere-produkte/c-serie/ But obviously this fanduct will fit on any setup with an E3D V6 and Bondtech BMG Extruder (Volcano Version…
Flsun Super Racer SR Feets for more stability 🦾 The model is 3 mm high but you can increase or decrease the height easily in you slicer. Used in this video:
To install this blowing option, you need to print out the modified vent holder housing. The distance from the bottom of the blowhole to the table should be about 3 mm. Fanduct only for kingroon kp3s - e3dv6 hotend titan extruder
Official FLSUN V400 Stock Fanduct for replacement.
Just reengineered the original Kobra 2 Hotend Housing for Fun. I dont like the original mount of Housing/Duct and Fan because it is very fragile. Here i used 2 M3 Screws (20, 25mm) to hold all in place. You also need 4 threaded inserts.…
it's kp5l kingroon Fanduct beter than stock no moddif creat specialy for stock printer print in 0.15 or 0.10 xwith support only for the bed
These are spare parts for the TwoTrees SK1. The Backshroud got hexagonal cutout instead of the original “doted lines”. Backshroud and the Fanshroud got several cutouts so, that you don't need to remove the filament, the tensionknob, the…
Fully Tested v1.2.1 Hardware Needed: 1) E3D Revo HeaterCore (100k Creality Sprite) | 1pcs - https://e3d-online.com/products/revo-heatercore?variant=41549447168059 -…
Hello 07.2025: V2 more robust and added a place for the original cables. I have noticed that the fan for the power supply and driver board on the Anycubic S1 blows into the case in a very undirected manner. With this fan, the airflow is…
🇳🇵 नपलम सवगत छ! Welcome to Nepal! This model was created by Dany Sánchez . Boudhanath is a stupa (a buddhist mound, usually containing relics) in Kathmandu, Nepal. Located about 11 km (6.8 mi) from the center and northeastern outskirts of…
If you want to improve the part cooling of you Prusa Mini and don’t want to modify any of existing parts, you can try to use this attachable Fan Duct. Just print it, attach it and thats it. It won’t be any significant change, but I…
"Anar. Nányë Andúril I né Narsil i macil Elendilo. Lercuvantan i móli Mordórëo. Isil." This is a pool noodle sword based on Anduril, Aragorn's sword, from The Lord of the Rings. You will need a 1/2 PVC pipe. You'll insert the PVC into the…
A Simple Sherpa Mini Directdrive Remix of the Satsana for the Ender 3 V2. Additional parts you need for this remix: 2x M3 Brassinserts (I used Ruthex) 2x M3 x 12mm Screws Sherpa Mini The BLTouch Mount you can find in the Remix Satsana…
- 8x3mm magnets to be glued in - 15% infill used in example -example printed on an MK4 using prusament filaments (PLA) If you’d like to shoot some spare change or a dollar my way, you can donate here (paypal). (check out my profile for…
the 2510 seemed to move to little air for my liking, so I adapted the duct to fit a 3010 fan. especially PETG and PLA where performing poorly, with material oozing uncontrollably from the nozzle. the heatsink also seems to be a little…
🇳🇵 नपलम सवगत छ! Welcome to Nepal! This model was created by Dany Sánchez . Pagodas are typical Eastern structures, usually taking the form of a several-story, wooden tower with gabled roofs. This model represents any of the many pagodas…
Wall mount designed to fit a replica of The LOTR's Narsil / Anduril sword. With these, the sword hangs without touching the wall. Holes are designed for Ø2mm nails but any screw will do. The plastic can stand it.
make adapting mk4s fanduct easier to other printer. 2 sample adaption 4010, and 5020 blower fan
Buenas, les traigo un remix del viejo y querido satsana, pero para la magna se para mejorar la ventilación de capa y del disipador, hice un modelo para cada necesidad como con los ventiladores originales, 3010 + 4010 blower, como mejoras…
I have a TronXY Crux1 3D printer and the stock cooling fan duct is barely adequate to cool the prints and nowhere on the net where printable files to be found for a better one. So after some tinkering i remixed a fanduct wich was meant to…
The idea of this model was to reduce the amount of material to a minimum. Tower height 140mm and 24 gramm of filament. Easy to print. No support structure needed. Sand clock design.
Da der original Kettenschutz des Cube Katmandu Hybrid Ebike recht schlabberig ist und auch manchmal an der Kette schleift, habe ich einen Kettenschutz konstruiert der mittels Neodym Magneten diteck auf dem Kettenblatt hält. Der Vorteil…
Mount for E3D V6 bowden extruder with fanduct for 5015 blower. Also there is mount for 3D touch or BL touch. For assembly is needed M3 screws and M3 heat inserts. Print material: ABS (or PETG) UPDATE 1: BL touch/ 3D touch holder is now…
The Chevrolet van or Chevy van (also known as the Chevrolet/GMC G-series vans and GMC Vandura) is a range of vans that was manufactured by General Motors from the 1964 to 1996 model years. Introduced as the successor for the rear-engine…
For English translation scroll down please! Einfache Wanduhr, gelasert auf 3mm Birken-Sperrholz, mit einem Durchmesser von 27cm. Die Vorlage der Engine stammt von hier: https://de.3axis.co/Dxf-Datei-mit-V-Twin-Motor/6o3vzk7n/ Das HD-Logo…
Hello, i make this Fanduct for better view to the Nozzle. Printed with supports and Artillery logo facing down. I use the Tree-Supports in Cura. It is better to remove. Fan 4020 2 M3x12 to install on Artillery 4 M3x25 to istall the Fan on…
Print with two pins and outlet on bed surface. Pins are for better adhesion to bed and should be broken off. Dont forget to remove the ring it's for support only. Add suport only at the bottom surface. 3 walls 4 top and bottom, 10%…
Check that lines are wide enough to avoid holes and cracks, cause walls are really thin :) Nice to combine with 5015 holder listed here.
This is a can holder for a standard sized can that attaches to your standup paddle board using existing bungie strapping. Tested on an inflatable SUP, but not on a fiberglass SUP. Printed on an Ender 3 Pro using PLA with .28" layer height…
Couldn't find any available models that fit the ender 3 v2 hole placement, didn't block hot end airflow, and fit a 5015 blower fan so I remixed a couple designs together to fix the hole placement and fan fitment. Printed in PETG at 55%…
Settler of Catan border If you have a printer with a printbed of 270x200mm you can print - 6x SettlerBorder.stl or with smaller printer - 6x pair of SettlerBorderA + B If you play with the 5-6 player extension you need: - 2x SettlerBorder…
I made these to hold laminated standups for tabletop gaming since I had problems with taped bases and binder clips falling over. There is a blank token which I like for unique NPCs or player characters, and numbered ones for keeping track…
This model is 2.4mm shorter than the original one
A custom fanduct for the latest FLsun Speed Runner. It directs the airflow as low as possible, directly to the nozzle tip. Printing in ABS or PETG is highly recommended for high temp resistance. But PLA works also just fine. Tree support…
Tronxy Crux 1 Fanduct, no need support.
A version of the Ukrainian coat of arms on a small stand up base. It isn't quite a Javelin or Stinger, but hey, just display the solidarity and your love. Fusion file is uploaded as well for whatever remixes you may need. Fusion file also…
Beide Teile ersetzen die Originalteile 1:1. Sie können also auch einzeln verwendet werden. Der Fanduct kann zusätzlich von 2 Magneten an der Grundplatte gehalten werden. Die hierzu notwendigen Aufnahmen sind vorhanden. Das…
I made this perch for my budgie cage. It is 10 cm long and the second hanging dimension is max 29 mm . Supports are needed at the bottom. I hope your budgie likes it! (on the photo is shorter version)
A Fanduct to use the Nevermore Micro V5 Duo as external part cooling on Voron 0/0.1/0.2. https://github.com/nevermore3d/Nevermore_Micro Print it standing without supports. update (06.04.2023, V17): some little adjustments, height fits for…
The original Fanducts did not hold for very long. One already broke while building the printer.. ;) This was the opportunity for me to design new ones with optimized cooling. I think they work quite well.
Passend zum EVA-2.3 System Hier wurde der Luftkanal entsprechend angepasst, so dass das Bauteil nun richtig gekühlt wird.
Loosely based on this device by B. Robbio. This design has five main structural parts and 38 switchable flags, assemble with five M2*4mm screws and two lengths of 1.75mm filament to hold the flags in place. No supports should be…
Type A is the version without a barrier. Type B is the version with a mid-section barrier. Printing without support ABS and PETG are recommended, but I printed it with PLA. ----------02.01.2024 update note---------- I've addressed some…
another printpart fanduct for my Prusa i3 MK3s designed with Autodesk Fusion360 Print instructions Printed in PETG at 0,2mm layer
Nelíbila se mi Andula tady, našel jsem a modifikoval jsem (velikost, natočení), jen už nevím, kde jsem našel zdroj. :(
Eine Wanduhr im Design unserer Erde. -------------------------------------- A wall clock with a design of our Earth.
Fanduct for Tronxy x5sa, x5sa pro, ….
MK3 style fanduct. Fits only a E3D V6 hotend. Partcooling is a lot better then stock with this duct. It's a remix from this volcano duct: https://www.myminifactory.com/object/3d-print-mk3anycubicvolcanoblower-51653 Enjoy and let me know…
Ziffernblatt mit Halter die Ziffern 3, 6, 9, 12 sind ein wenig größer Layer 1-8 (0-1,5mm): Ziffernblatt der Uhr, ich habe ein 2 farbiges SILK Filament genommen, ist mir aber zu unruhig. Die Ziffern sind ausgelassen, so dass der…
Previously I uploaded a remixed fanduct for the SV06. After testing I found that the air outlets were to far away from the nozzle. Which is why I designed my own Fanduct. It still uses a regular 40-20 fan and you will lose approx. 3mm in…
This is an upgrade for the original 4010 extruder fan. It's a little longer and the air channels are narrows to increase the air flow. I'v not make any specifict test yet, if you want to try it and work on in, please feel free to remix it…
A beautiful minimalist painting of a Parakeets on the wall or with a stand on the table. Size 165 x 200 mm You can find the small print stand for the table on my profile ↓…
Remixed to make the mounting slightly adjustable in height. One version that still is for countersunk screws. One version made for hex screws.
creation d'un fanduct semi circular modifier pour WANHAO D12/230 et D12/300....
Multi-purpose upgrade for Sidewinder X2 (and maybe X1, Genius Pro) 3 Mount-plate Versions. Mount-plate for Fanduct and BLTouch Mount-plate for Fanduct only Mount-plate for BLTouch only Stepper/Electronic Cover with Airgaps replacing the…
Circular fanduct with a cut to allow a better view of the nozzle (and good access to it), for Anycubic i3 Mega modified printhead with 5015 blower. High airflow and multiple stream directions. The final stream holes have a dedicated…
I recommend scale it to 125% The print in the pictures is the original size (without scaling it up)
Ich habe in meinem Fall das Modell mit dem Glow in the Dark in Blau von Geetech gedruckt um im Dunkeln die Lichtschalter zu finden.
This is Anduril from Lord of the Rings. This is designed as a desktop toy - something to play with when sitting at your computer and needing distraction. It's designed to print in one piece. The handle and main blade section are drawn…
Some of the items out here printables and also in the MakerLab have unfinished or poor design and not fit perfect to the front cover. This is my master file including one test fan duct. Items is printable two parts and easy custom for…
2 holder for watches 2 Halter für Armbanduhren, der liegende (einfache) ist so hoch gewählt, dass die Uhr nicht mit dem Gehäuse aufliegt.
Standup Comedians - George Carlin - The Legend 3D printable model.
Extra cooling performance for Anet ET series.
To replace the unstable housing, I designed this printable, stiffer housing for the original parts and positions including the TR sensor. The partcooler can be replaced even though the 4010 fan is mounted. For the thread insert threads…
This mod dramatically improves the hotend performance of the Ender 3. The "coldend" will be cooled way better compared to the original cooling solution. Also, the performance of the part cooling fan is increased significantly. The overall…
Original FLSUN S1 Fanduct for replacement.
Der 3D-gedruckter Armbanduhrenhalter ist eine praktische und elegante Möglichkeit, um Ihre Uhren sicher und ordentlich aufzubewahren. Der Halter kann aus verschiedenen Materialien wie PLA oder ABS hergestellt werden und ist robust genug,…
Buenas a tod@s os presento una proxy de la espada Anduril que espero os guste y lo imprimais para vuesta colección.
Print with PETG or higher temp resistant materials. Enjoy!
Hi, to download filament cooling for the TEVO Black Widow printer, fanduct for a 12v or 24v turbine fan: http://s.click.aliexpress.com/e/bpFvTQLI (FAN 12V) http://s.click.aliexpress.com/e/bpFpYKOG (FAN 24V) fanduct is my production from…
120mm fan fanduct. not tested. no idea if you can eve print this. i want to upload this so people can work on this design for their needs/
This is a transducer mount for a garmin gt20 transducer on a oldtown salty pdl. it fit in the front scupper hole. I used a ¼-20 hex bolt 6 inch long and for the cap 4-40 .5 inch or M3 print with petg abs or asa .2 layer height 6 wall…
I lost my old Cover, so I deigned a new one. Print in TPU 0.15 mm Layer-Hight.
When I upgraded my Elegoo Neptune 3 Pro with an all-metal-hot-end, I started to experience heat creep. The issue was also partially provoked by a slower spinning cold-end fan, because of natural wearing. It is hard to find a 4015 blower…
I bought a used Raise3D N2 Plus in really rough shape. One of the missing parts were the cooling fans for the tool head. The standard fans are 2x 35x10mm axial fans which are used for cooling the heatsink of the hotend (coldend) and for…
Original FLSUN T1 Fanduct for replacement.
To rest your broken blade
