Liczymy pasujące modele…
Made this after I signed for a space selfie here like this. After you sign you'll get a free patch of this image bellow. So i tried to make into a keychain. I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No No MMU/AMS needed.…
prints with no supports
Since many of the new Chamberlin/LiftMaster garage door openers do not have removable light covers, including mine, I decided to make an enclosure to prevent any shorts and keep the PCB properly protected. This is an enclosure for the…
Batgirl based on the designs by Babs Tarr and Cameron Stewart.
Batgirl is a simple print, doesn't need any supports on FDM :) “CC” and “CV” in filenames explained in this image:
Used parts from many models. FYI this is the 150% version with a better hip joint.
DO NOT COPY AND PASTE THIS INTO YOUR PRINTER, IT IS FOR REFERENCE ONLY!!! SERIOUSLY, I TAKE NO RESPONSIBILITY FOR DAMAGE TO YOUR PRINTER OR FOR A POTENTIAL ROBOT UPRISING! I asked ChatGPT/Bing/Sydney to comment all of the start gcode from…
For more logos : +100 World famous logos (+DXF) par Referentiel | Téléchargez gratuitement un modèle STL | Printables.com
I started on my journey with ATG about 6 months ago. since then i have seen massive improvement in the ability of my lower body to move pain free. Although using weight plates to provide heel elevation works, 'ATG Buddies' style squat…
Designed this case to protect the contacts on the bottom of a ratgdo v2. One model is just the case. You could use zip ties to mount if you want as the original design calls for. The holes are also sized for M4x10mm bolts and the bottom…
This model is compatible with the lego system.
OpenAI / ChatGPT logo in 3D. 5mm high.
ATG Style Squat Wedge I created this model because there is no way of buying a squat wedge in my country. It's chunky and lots of material needed for it. Took 60 hours to print for me. It doesn't cover your whole foot. Thats the main…
Taken from the 3d files of Batgirl's armour in Arkham Knight. May need to be resized to fit on your body. Mileage may vary depending on materials and print settings.
Cowl split into 3 parts to fit on most printers. From Arkham Knight.
i need it some caddies replacements for a couple of dell latitude E6420 and E6430ATG, and i do not wanna wait 3 weeks for parts from main land, so i recreated the original hard drives caddies for those laptops, Latitude E6420 and E6430…
Case and mount for a ratgdo v2.5i
This is an ATG Squat Wedge Clones . I hope uses hard training .
This 3D model is the result of a unique collaboration between AI (ChatGPT4) and me exploring the capabilities of OpenSCAD with a language modele like ChatGPT. It exemplifies the potential of AI-assisted design in creating practical,…
Torso files for Batgirl Arkham Knight.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Holds your heatgun in place. Do not use heatgun while attached to honeycomb storage wall.
I didn't like landing multiple conductors on the obstruction and ground terminals on my garage door opener. I needed an enclosure for my recently purchased ratgdo boards, so I added a provision to hold a 3 position lever nut for the…
My take on Batgirl character
A coaster from the ChatGPT logo. Not designed by ChatGPT :-/ It insisted on answering with non functioning code. I used the SVG file from https://cdnlogo.com/logo/chatgpt_120589.html .
If you are like me and decided to get rid of the MyQ controller because they have closed their 3rd party integration support, you will be happy to know there is a project called ratgdo that allows you to create an ESPHome or MQTT…
Open AI/ChatGPT-inspired jewelry. These are print-in-place earrings. Print Settings: Material: PLA, PETG Layer height: 0.20mm Supports: no Perimeters: 2 Assembly is needed Happy printing! other models:…
Palladin's model is an excellent template for three Skadis hook in a row. Paint support under Skadis hook. 3 Perimeter 4 Top- and bottom layer 10% grid infill Happy printing!
The AtGames Legends Pinball (ALP) has two openings to the interior of the cab - both covered with locked doors. I'm sure there are those who want to restrict access to the ALP interior and appreciate the locks, but I'm not one of them.…
Quick and dirty remix to make a ATGM336H GPS antenna fit also. I've added a spacing of 20.6 by 6 by 6 mm extra in the top. https://www.tinytronics.nl/en/communication-and-signals/wireless/gps/modules/atgm336h-gps-module
Heatgun holder for Honeycomb Storage Wall together with M4 Screws and the M4 nut inserts
Next up for the bat family arsenal, batgirl's tonfa based the desgin on one of the versions of gotham knights concept art source the ends are hollow to fit in some small batteries and LEDs i made it with no specific on/off switch in mind…
Used Walter's SCAD model to build this case for my Heatgun. Get rid of loitering cables. Remodelled the lid with text. Sidewalls with imprinted text too. Fits much better my drawer. Attached two files: Lid with inserted place for text,…
Batgirl emblem Category: Coins & Badges
Ein Thermostatgehäuse für das STC-1000 Modul. Das Gehäuse besteht aus 2 teilen, der Boden und das Gehäuse selbst, das Gehäuse wird einfach auf den Boden aufgesteckt. Im hinteren teil befinden sich 3 Löcher (2x12.1mm 1x 5mm (Sensor) Beide…
A simple, sturdy holder for the ratgdo v2.53i. Made to fit my specific garage door opener, but it should be versatile enough to work with quite a few setups. I've included the step files in case adjustments to the clip are necessary.
I've made quite a few heatgun holders and i was tired of them breaking so i designed this. Made with 2 perimeters and just 20% infill but so far it's holding pretty well.
A simple mount for a Steinel heat gun (type-3841). Nothing fancy.
i like to print most models with quite a bit o resolution. but print it however you think is best
My dear friends, I have designed Chat GPT logo for you and download it and print it and share it with us. thanks
This is a stand for holding Goatguns. (www.goatguns.com) It holds 8 guns, very stable. No additional parts required
Bring the streets of Gotham to life with this stunning superhero STL model that captures every heroic detail in printable perfection. This incredible Batgirl figurine showcases the iconic vigilante in a dynamic pose, ready to leap into…
Batgirl coaster. Printed with shiny silk purple & gold PLA makes it look soooo nice!
A not so good model designed using OpenAI's chatGPT , based on OpenSCAD code. You can see in the second picture, how I arrived at the final code based on some prompts, and how the AI adjusted the model along the way.
Screw This! Generic Heatgun holder comfortably holds your heat gun: Requires: 1x Heatgun 1x Screw This! screws: https://www.printables.com/model/522789-screw-this-hsw-screw 1x Screw This! single inserts:…
Bring the streets of Gotham to life with this stunning superhero STL model that captures every heroic detail in printable perfection. This incredible Batgirl figurine showcases the iconic vigilante in a dynamic pose, ready to leap into…
The Arcade Control Panel offered by AtGames for their Legends Pinball device has a joystick which allows for generally free movement. However, playing classic games may offer an improved experience if the joystick is restricted to 4…
This is a remix of the original ratgdo PCB Case from @samwiseg0 along with the awesome remix from @PatrickONeal_471773 that added support for Wago connectors to improve wiring support – Wago connectors will change your life! The original…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi there! I have been setting up my Skadis Pegboard for my printing workspace, and thought I'd share my remixes and designs. This is a…
Open AI/ChatGPT-inspired jewelry. These are print-in-place pendants/necklaces/chokers. Print Settings: Material: PLA, PETG Layer height: 0.20mm Supports: no Perimeters: 2 Assembly is needed Happy printing! other models:…
Unfortunately, the share chat feature in ChatGPT doesnt support images.
For those of you that are gutting the ALP internals and going full OTG, instead of buying a new plunger (which usually uses a slide potentiometer) I decided to make my own that slips over the stock bracket. The back plate screws to the…
For an interior fit-out, I wanted columns that looked a bit more “vintage”. The caps are also suitable for fastening so that you don't need ugly sheet metal brackets. There are two variants: screws hidden inside and screws outside as a…
This is an under ALP cabinet mount you can use with the Bluetooth 2.1 Amp ZK-TB21. Like the original file, supports are needed for the flanges but the rest didn't need supports. I have painted these on in the 3mf like the original…
Thanks for checking out the model! I wanted to make a pinball door for the ATLegends Pinball with no modifications needed, and this is the result of that process! (All links included are non-affiliated, and I don't receive any kickback…
Simple bracket to mount ZK-TB21 under the cabinet
-Panels interlock -No supports -Fits AtGames Legends Pinball -You need a 250 x 250 print bed or larger. -Print Marque in clear PETG Check out my printables profile for more AtGames Legends Pinball files.
Not sure where I found the original but I cropped it down so it would fit the AtGames Pinball cabinet. One has slanted Coin button holders, the other is flat. Both are hinged. Print Settings Printer Brand: Creality Printer: Ender 3…
I always wanted to have LAN based control of my garage door but it wasn't until myQ decided to shut down the support for Home Assistant, that I came across ratgdo . However, I couldn't wait for months to get the board for it and decided…
Bring the streets of Gotham to life with this stunning superhero STL model that captures every heroic detail in printable perfection. This incredible Batgirl figurine showcases the iconic vigilante in a dynamic pose, ready to leap into…
Batgirls mask from DC Super Hero girl High. I haven't yet printed it in flexible filament I just heat formed some PETG and it came out cool! Print instructions Unassociated tags: D.C. Category: Glasses
Replace the top of your AtGames Pinball with added cup holder and extra switch. -Panels interlock -No supports -Fits AtGames Legends Pinball Check out my printables profile for more AtGames Legends Pinball files.
Hey folks! Printing rules are the same for this one as the original by Tommy Williamson . I also added a file for TPU feet. You will want to add this so the Stock D-pad is not interfering or you can use any other standard rubber feet. I…
I made it with standard PLA 0.28mm draft 55% infill
As night falls over Gotham City, a shadowy figure watches over the dark alleys from above. Perched high above the decaying rooftops and crumbled brickwork of Gotham, Batgirl crouches in high alert, ready to strike at a moment's notice.…
Trychtyr pro plnění cartridge Catgenie 120+
To celebrate 100 downloads on one of my more popular models, I made something silly for everyone! I've got a “IDK, Google IT” sign on my desk, but nobody googles things anymore. So it got me thinking I should make a sign to remind me (and…
A slightly bigger version that can be used for a parkside heat gun Category: Organization
Bring the streets of Gotham to life with this stunning superhero STL model that captures every heroic detail in printable perfection. This incredible Batgirl figurine showcases the iconic vigilante in a dynamic pose, ready to leap into…
Brackets to hold a matrix and plexi agains the top of the Atgames Legends Pinball playfield
Easy to print, without any supports. Use two 4mm or 4,5mm bolts to screw it to the wall
I'm still waiting for my ratgdo to arrive, but in anticipation I've been planning how I'm going to install it with samwiseg0's model. It'll be mounting it upside-down, but this will cause the logo to be upside-down as well. And since I…
It will help you organize your seeds in a mini greenhouse. The individual fields are 40x40 mm. Category: Other
A 100-mm coaster with the OpenAI logo on it. Print the logo in white (Tool 2) and the rest in black or grey (Tool 1). The file is compatible with PrusaSlicer, but I'm not sure about Bambu Studio or Cura. The coaster has no top infill…
Estrella de árbol de Navidad Se imprime el stl. Con de una foto, se pide al chatGPT que la modifique al estilo studio Ghibli y se imprime a un diámetro de 48 mm. Se pueden comprar discos de acrílico transparente de 50 mm. de diámetro…
Vanity covers for the front of your AtGames Pinball machine. -Panels interlock -No supports -Fits AtGames Legends Pinball Check out my printables profile for more AtGames Legends Pinball files.
This is a replacement part for a BOSCH style Kitchenaid. It's used to couple the machine with the worm gear to grind meat or cookie dough. I found this on a russian website and it was pretty hard to fine so I thought I would share it…
Cover for air purifier to protect against cats no supports needed -------------------- Want to support me ? → paypal.me/AlphaWolf97
These futuristic bat-inspired sunglasses with grid-style "lenses" are a real showstopper! Whether for a costume party, cosplay, carnival, or simply as a bold fashion statement – this unique model is made to stand out. Please note: this is…
My sign for software engineer hourly rates including if ChatGPT originally created the code.
Port cover for AtGames Pinball (ALP) HDMI and USB ports
This mount is for a Porter Cable heat gun, model PC1500HG, 1500watt. I designed it to install on a flat surface for holding the gun at an upright 30 degree angle. You can make your own holes with a drill, or by transferring a pattern from…
Vertical laptop bracket for Virtual pinball machines. -No supports or brims necessary -Scaled to fit Asus G14 laptop but can be scaled in slicer for larger. -Mounts on back, sides or front of cabinet Please like and give it a review if…
Old one broke, had to make a new one, works fine. 3 walls 5% infill did the job, a bit lighter than the original
Design Concept The Batgirl Lowpoly bust is designed to capture the enigmatic and strong character of Batgirl with a modern minimalist aesthetic. The low-poly style gives it a sleek and contemporary look, making it suitable for display in…
Einfaches Gestell aus 3mm Sperrholz zum Trocknen von Saatgut auf einer Untertasse (max. Durchmesser 14cm) oder einer Saatgut-Schale damit das Saatgut nicht im ganzen Haus verteilt wird 😉Ausgelegt für 5 Untertassen bzw. gedruckte Schalen…
Bracket to replace the DPad for the Atgames Legends Pinball cabinet with a standard arcade pushbutton, useful if you've replaced the internals of the ALP with a Pinscape controller or the like and no longer have need for the front DPad…
3D cat magnet for your fridge. I didn't want a flat cat magnet like most models out there, so I made this guy. Make sure it is oriented with the flat side on the build plate Make sure to add a pause at 3.15mm to insert the 12x3 magnet…
This is a branch off of the case that samwiseg0 made for the ratgdo. This case has no mounting tabs or holes on the bottom, which is ideal for mounting using double sided tape. Please reference…
This is a custom-designed enclosure for the WAVGAT / ATGM332D Mini GPS modules commonly found on electronics marketplaces. It features a compact design with a snap-fit lid, ensuring your module is protected and cool while remaining…
Heatgun nozzles & soldering tips holder, should work for a lot of soldering stations
Źródło oznaczyło ten model jako treść 18+.
I asked ChatGPT to design a robot buggy using OpenSCAD. It took a bit of work to get it to work correctly, but this is all from code generated by chatGPT, not by me. You'll need four wheels, two axles and one body. The wheels need a drop…
Dissenyat a partir de la peça original trencada (en negre) mitjançant Fusion360 i calibre. Imprès inicialment en ABS per a fer la prova i després en ASA per millorar l'ús a la intempèrie. Imprès sense suport i amb una laçada de capa de…
Slightly modified Pokeycat's design to raise the permiter of the cutout 2mm so the glass top is flush with the button. This is only for people that have modified their ALPs and use a controller board like the PinOne from Cleveland…
