Liczymy pasujące modele…
When buying the table legs they only came with 2 hooks, but have 4 mounting locations, 2 on each side. hooked made in a similar look the the originals to be able to use the unused mounting positions to store other items. Designed to be…
Chest Strap Buckle Clip for Lowepro ProTactic Backpacks This is a small clip designed for Lowepro ProTactic backpacks that secures the sternum strap when it’s not in use. Instead of dangling loosely, the strap clips neatly into this…
I designed this rotated S-shaped hook to hang my backpack flat against a closet rod or bar. Unlike a regular S-hook, this one is rotated 90°, so your backpack hangs parallel to coats and clothes – saving space and keeping things tidy.
This compact and sturdy table hook is designed to keep your bag, backpack, or headphones off the floor by securely attaching to the edge of your desk. Its geometry is fully optimized for support‑free 3D printing , ensuring excellent…
This simple item solves the problem of hanging a backpack on your bicycle rack without using additional straps, panniers, or anything else. Small, lightweight, easy to print and does the job. Perfect if you are picking up your kids from…
I wanted a way to finally hang up all of my backpacks, but it seemed like every other option out there was designed with specific closet rods and/or backpacks in mind, and either the dimensions were wrong for my purposes and no CAD was…
The misses was always leaving her bags around the place and on the floor so this hanger has significantly helped clean up and organize everything. Have even used it for a heavy winter coat too. I've has the best success printing it on its…
Needs GoPro compatible screw and nut. Made specifically for biking, where the camera is mounted upside-down and tilted to compensate for upper body being tilted (pointing forward when body is in riding position). The part holding the…
My sister likes to sew and often bags. Once she saw a lock that she and my niece would have liked. She wasn't able to take a picture but she gave me a rough sketch - to be honest two lines each representing one perspective. I detail this…
My sister likes to sew and often bags. Once she saw a lock that she and my niece would have liked. She wasn't able to take a picture but she gave me a rough sketch - to be honest two lines each representing one perspective. I detail this…
Mast Holder for backpacks. Designed to carry a Spiderbeam 7m fiberglass mast (Inner diameter 55mm).
Materiale utilizzato PLA ma consiglio il PETG per maggior resistenza e minor flessione se volete esagerare per ridurre al massimo la flessione e la possibilità che si rompa ABS o Nylon. Layer 0.2 Supporti da abilitare Misure dell'incastro…
Schraubbare Rucksackschnalle für flexible Gurtbefestigung Diese Rucksackschnalle bietet eine unkomplizierte und elegante Lösung zur Befestigung von Gurten an Rucksäcken, Taschen und ähnlichen Anwendungen. Sie zeichnet sich durch…
Keep your bag clean and off the floor with this minimalist, high-strength 3D-printed table hook. Whether you are at the office, a coffee shop, or working from your own desk, this hook is the perfect compact companion for your gear. Key…
I needed something sturdy to keep the inReach Mini 1 on myself while riding my motorbikes off-road. I have two Kriega trail backpacks, so I decided to print a holder that will be using zip-ties to attach inReach to my backpacks. You will…
Deutsch: Ein katzenanhänger für Schlüsselbund, Rucksäcke, Halsketten und vieles mehr. Damit die Kids die Rucksäcke oder Jacken usw. nicht vertauschen. English: A cat pendant for key chains, back packs, necklaces and much more. So that the…
This model was designed to mount zip ties to a backpack with MOLLE system. The belt width of the backpack is 25 mm. This model is splitted into two parts: Stopper: Holds the head of the zip tie in position so it can not slip out Holder:…
I lost one of the clips for the sternum straps for my Patagonia backpack that I use everyday. I created the adjustable, detachable sliding clip and then created this 3d printable clip that works with the female clips on the backpack. The…
Idea Enhance the functionality of your backpack, vests, bags, and more with this versatile WAGO clip, designed for everyday use. Compatible with standard WAGO connector clamps (221-413), these connectors can be easily pushed into place…
Heken um Dinge an Riemen von Rucksäcken zu befestigen. Hook to attach things to a backpack Außmaße: Loch / Hole: 24mm x 4mm Grundplatte/ base plade: 32mm x 32mm Support wird für den Überhang benötigt Support is needed for the overhang…
This is a small clip for backpacks which allows the strings to be tightened. Both versions have spikes to prevent (a little bit) the ropes from going down. Version 2 has a place to put the rope and prevent losing the clip. Printed with…
This is a system to hold a Selfie Stick / Telescope Monopod with a 1/4inch screw mount on a backpack. It is designed to stick transversal outwards of the backpack to achieve the “Angel View” on 360° cameras. You can see an example here…
I decided to create this sleeping bag holder when I realized that I was attaching my sleeping bag for a long camping trip to my backpack by means of using another, smaller backpack. This made no sense and did not work well. Now, however,…
A few months ago the buckle of my Burton Dayback 2.0 broke down. So I decided to quickly model a replacement part and print it out! With this model, you can customize your Burton Backpacks to match your personal favor and try out every…
I have designed this buckle to replace the one from my personal backpack. It should be precise enough to be used without post processing and without having any play. It's surprisingly strong, i haven't been able to open it by pulling on…
I needed a stronger magnetic clip for my ‘Evoc Hip Pack Pro 3’ hydration hip pack and while I was designing this, I decided to make it a clip on baseplate. Now I can easily add one to any packpack strap with a width of 24mm. It slides…
I provide two versions, one with the possibility of securing the tube with a rubber band such as an o-ring seal, and the other a simple simplified version.
I needed a hook to organize my backpacks so I designed this. Hope you like it! (they fit a 16mm diameter bar) Print Settings Printer: Witbox Rafts: No **Supports:** No Resolution: 0.2 **Infill:** 20% Filament: - PLA Category: Organization
This hook is designed to fit in the cable holes of desks. You remove the plastic grommet of the hole and replace with the hook. Now you got yourself a place to hang your backpack, purse or bag. Original file:…
The Original Filmed to the side for me. So I angled the Mount. I recomend trying 15 degree.
Designed to attach semi permanently to one of the barrels of NIKON Trailblazer binoculars in order to attach them to backpack straps when not in use. Parametric design allows for customization of parameters such as barrel diameter, barrel…
The later model Gregory Baltoro backpacks no longer have an adjustable lumbar support. I needed a little more. So I printed this piece. (Out of TPU.) Designing and iterating the model itself wasn't the hard part. The hard part was 1)…
Just another hangers for the house hall I used 125mm mount tempalte for 1200x200x20mm wood panel with mixed large/mid hangers Printer setup for hooks PETG 0.25mm layer 5 perimeters Fill density - 10% Fill pattern - Gyroid Top fill patter…
Keep your bag clean and off the floor with this minimalist, high-strength 3D-printed table hook. Whether you are at the office, a coffee shop, or working from your own desk, this hook is the perfect compact companion for your gear. Key…
When buying the table legs they only came with 2 hooks, but have 4 mounting locations, 2 on each side. hooked made in a similar look the the originals to be able to use the unused mounting positions to store other items. Designed to be…
This compact and sturdy table hook is designed to keep your bag, backpack, or headphones off the floor by securely attaching to the edge of your desk. Its geometry is fully optimized for support‑free 3D printing , ensuring excellent…
Designed to attach semi permanently to one of the barrels of NIKON Trailblazer binoculars in order to attach them to backpack straps when not in use. Parametric design allows for customization of parameters such as barrel diameter, barrel…
PLA plastic support for backpacks. 5 mm thick, capable of holding two empty backpacks to save space and keep them within reach. Two 5 mm diameter holes for mounting. Simple and quick to print. The support is also designed to hold a…
männlicher part für den bauchgurt des Deuter AC Lite 14 SL gedruckt in ABS
I’ve designed this special keychain, which contains an NFC chip inside. I’ve stored my phone number on it in case I lose my keys or backpack, but you can store anything you want—📱 social media profiles, 🌐 a website, ✉ email address, and…
I created this model due to the need to protect the base of the steam deck since the backpacks I have are thin at the base and would damage the portable device in case of a fall. It is divided into 4 parts according to length, and in…
Not much to say, its simple, easy to print and deep enough (75mm overall) so that hangers / loops which are not flush mounted at the backplate of the backpack still fit. Can also be used for headphones. And ofc everything else you can…
Do your sneakers smell after an intense CrossFit/Hyrox session? Keep your backpack clean and odor-free with this MOLLE system designed to carry your shoes or boots securely and conveniently. This minimalist system consists of two pieces…
Hello makers !!!, Today I share this backpack support, ideal to be able to place our backpack or bag in an assigned space and thus not have it in an uncomfortable corner or on the floor. I made the design to support a maximum load of 5 kg…
Base, plus sign and border are all different levels to make multi-color printing easier. Four circular mounting points 10mm across for tying to MOLLE webbing with carabiners or cordage
I have designed a hook that I can use to hang heavy clothes and rucksacks on my heavy-duty shelves. The hole is for M4 screws with washers (9mm diameter). Printed with PETG, 25% infill and 6 wall lines and 6 bottom and top layers. The…
Male part of a Deuter Backpacks belt / strap buckle. Fits 3cm wide straps, e.g. the waist strap on a Futura 22 backpack. The pictures show how the strap should be routed through the printed part. Prints in 41 minutes at 0.15mm layer…
A simple attachment for your backpack and is very small but useful.Your like/download or make would mean the world to me
this can be used as a key chain or a full on bathroom sign
Quickly printed replacement part for a broken backpack or for a lanyard. Suitable for 25mm straps. Version 2 (V2) Has a cut-out to simply slide the part onto a belt to make it easier to replace on a backpack. Print settings: 100% infill…
Quickly printed replacement part for a broken backpack or for a lanyard. Suitable for 25mm straps. Version 2 (V2) Has a cut-out to simply slide the part onto a belt to make it easier to replace on a backpack. Print settings: 100% infill…
Quickly printed replacement part for a broken backpack or for a lanyard. Suitable for 25mm straps. Version 2 (V2) Has a cut-out to simply slide the part onto a belt to make it easier to replace on a backpack. Print settings: 100% infill…
Quickly printed replacement part for a broken backpack or for a lanyard. Suitable for 25mm straps. Print settings: 100% infill or wall thickness of 8 The layers should be printed with a concentric pattern. Schnell gedrucktes Ersatzteil…
I bought a closet organizer which has 10mm diameter horizontal rods on the sides. I modelled these hooks to fit over these rods for hanging hats, bags, etc. I printed them in PETG so they can flex over the rod. 0.6mm nozzle, 0.3mm layer,…
