Liczymy pasujące modele…
I use an amazon basics condenser mic on my desk (yeti clone), and I mount it on an arm so I had the original support mounting holes free to hook a filter onto it. The thing definitely works and I'm happy with it, the grill is just 2…
Print base down, no supports required. Will just slot into the box and be retained by the others around it. The part is 1.8mm lower than the original design so that it still sits flush with the others at the top.
### Updated 9/11/24: Added no-zip tie opening model as recommended default. I have ran this for nearly a year with petg and no zip tie and not once had to readjust the brackets. They sit tight and hold over time despite the heat involved.…
A Gridfinity holder for Amazon Basics Brass Mini Brushes. ( https://www.amazon.ca/dp/B08D9QH3X3?ref=ppx_yo2ov_dt_b_fed_asin_title ). A snug fit. A magnetic base might be helpful.
Grundbausteine, parametrisiert, für OpenSCAD. Version 25, ersetzt v18 und v19 Rohr (tube) mit Fasen (ein/auswärts), Anschrägung (Konus), Sektor, uvm. Box mit Fasen (alle Außenwände) Stern (Objekte im Kreisbogen) Reihe (Objekte entlang…
Created this for the honing guide that came as part of an Amazon Basics Chisel Kit which had the following angles documented: Chisels: 30 degrees - 30mm 25 degrees - 40mm Planes: 30 degrees - 38mm 25 degrees - 50mm Adding the F3D with…
Print the base on its side so that the layer lines are aligned with the drain channels. Add picture frame bumper feet if desired. A brim may be necessary. The brush support clicks into place. No glue needed.
The original model by MyStoopidStuff is great, but the 3.5mm audio extensions we had on hand were too large in length and diameter to fit the original model. This remix increases both the accepted length (all the way to the strain relief)…
Printing Material and settings should not be all that important. 0.4 nozzle with 0.2 layer height walls and infill: defaults will be fine print orientation: same as STL OpenSCAD Requires HSW lib and BOSL2, see here for detail .
Modeled in OnShape. Printed on Elegoo Neptune 4 Pro. Dimensions: Inside Base: 114mm x 49mm Overall Height: 92mm
Mehlfang für die Back to Basics Getreidemühle Das Teil sogt dafür dass das frisch gemahlene Korn nicht so weit nach rechts und links wegfliegen kann und schön nach unten in die Schüssel fällt. Es wird einfach aufgesteckt und sitzt dank…
This cap slides onto the end of the padded armrest of an Amazon Basics Office Chair to protect it from wear and damage from bumping into the desk.
Camera Quick Release Plate (Plaque de Trépied Amazon Basics) Accélérez votre installation avec cette plaque de déclenchement rapide, parfaitement compatible avec les trépieds Amazon Basics. Fixez et retirez facilement votre caméra pour…
Ikea Skadis - Amazon Basics (Denali) Screwdriver Holder
Remix of allen key holder to be compatible with Peglock.
Intended to lie flat so you can see all the labels, but printed vertically so I could fit it on my platen. This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/2OLLddTw2gG Category: 3D Printing
This fits the cheaper and smaller Tripod branded as “Amazon basics” here in North America. I've included a step file to make it easy to adapt. I printed in ABS because these tripods usually stay in vehicles outdoors when not in use. I…
The organizer can be found here: https://www.amazon.com/gp/product/B08RZMKC9K/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 This is a remix of Aaron F's pre-supported 1x1 bin to include a label shelf.
Got tired of trying to find the stapler on the table. Attached to the wall with double stick foam tape.
This mount is for an Amazon Basics/Denali electric screwdriver. There's another model on this site that uses a similar mounting style but that one grabbed onto the screwdriver grip, which was scratching my grip and I felt like it would…
A mount a MSI G274F monitor (27'' monitor in photo) The MSI monitor has a mounting space for a Vesa75 (75x75) and the supplied mount of the Amazonbasics monitor mount is 100x100. Created the mount, rather than buying one. The mount was…
INTRO: I wanted to print a USB extension for my mini and I wanted to make a backplate for the LCD. I found RDWare's file, but I didn't feel like buying a new cable since I already had the AmazonBasics 1 Meter UBS 2.0 extension cable (…
Janipur Bowl Basics 2 – Simplistic Modern Design, Durable Functionality, and Customizable Elegance Transform your everyday spaces with the Janipur Bowl Basics 2 , a thoughtfully designed, multipurpose bowl that blends simple aesthetics…
Remixed the 25mm hook so it Snap-On to the wildly used Amazon Basics Wire Shelving
Replacement plug/cap for Ergotron LX and Amazon Basics (B00MIBN16O, B07QNY2G4T) monitor arm. I tried to loft the upper surface as close as possible to the profile it's supposed to be.
A simple wall mount for Amazon Basics screwdrivers. Holds the driver firmly. Print vertically for highest strength on clasp. Would suggest PETG and support for roof of bit block cavity.
I combined the thoughtfully designed Amazon Basics/Denali Electric Screwdriver Wall Mount by @yipottery_2481232 and the ingenious Sy's Peglock - Locking Pegboard System by @StellasFun to arrive at a pegboard mounted holder for the Amazon…
Mathbox - Mathematic basics practicing I made a first version for my 7 years old granddaughter to practice basic operations (+ and -) of mathematics. His father place the numbers to add or subtract and she mentally calculate and give the…
Got a new AmazonBasics SKIL cordless screwdriver for Christmas, plus a set of toolant hex drill bits . Here's what I designed to store in on my pegboard. Holds the screwdriver, the bits that came with it, and the toolant bits. Cutout in…
I created this model to mount a power strip to the bottom of my desk in a way that's easily removable. This was more accurate than trying to place screws to match the mounting holes on the bottom of the power strip. I created it in…
Amazon Basics Tripod Adapter Plate for the following tripod: (https://www.amazon.com/AmazonBasics-60-Inch-Lightweight-Tripod-Bag/dp/B005KP473Q), meant to be used with the following screws: (https://www.amazon.com/gp/product/B00IXDECV4)…
Simply print this, then pop out the old overly tight bitholders and pop in the new printed ones. I included the F360 file in case you want to tweak the size of the hexagons to your liking.
Info for search: B07MXXR5P6-PARENT B07CZCQ481 Amazon Basics 5-Blade MotionSphere Razor for Men with Dual Lubrication and Precision Trimmer
Tis is a piece to protect your Amazon basics lightning cable from breaking
I use an amazon basics condenser mic on my desk (yeti clone), and I mount it on an arm so I had the original support mounting holes free to hook a filter onto it. The thing definitely works and I'm happy with it, the grill is just 2…
I recommend to use PETG an to print it in a 30° to 45° angle with support for proper strength! ASIN: B07PBV7GH1 Item model number: C-10049FM-30L
Spacers to stop Amazon basics rectangular bin/trashcan from sliding too close to counter impeding the lid opening fully. Rests overlapping the bin so stays in place when bin/trashcan is slid in around.
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a medium-strength design with the series number 200. Two 80mm length hinges of this design will…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a low-strength design with the series number 150. It is suitable for lightweight doors, chest lids…
Small assist ring for better airflow for Amazon basics vacuum bag. Provides unobstructed airflow, protects bag from punctures and tear. For permanent use could be glued to either valve or opposite side of the bag (depends on bag contents)…
This is my design of a fully functional, print-in-place hinge – especially created for the FFF process using PETG or ASA material. It is a high-strength design with the series number 300. It is suitable for heavy furniture doors and lids…
I created this colorful contraption specifically as an education tool that can be used in classrooms and with younger children to help teach the basics of gear mechanics. It features several common types of gears, including spur, helical,…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
This is my design of fully functional angle brackets. I created them especially for the FFF process to be printed using PETG or ASA material. These prints require a well-calibrated printer and high-quality filament to be functional. If…
This is my design of fully functional corner brackets. I created them especially for the FFF process to be printed using PETG or ASA material. If these corner brackets are printed with the correct settings and materials, they can…
Amazon Basics AUX 3,5 mm Extension Cable Mount
There is a new revision B of this project , with more pipe diameters and additional wall mount distances. Unless you like to print exactly this version of the clamps, please use the newer versions with an improved geometry. Check out the…
You can use it to connect the female CAMLOCK fitting to the port on an Amazon Basics Vacuum Compression Space Saving Storage Bag .
I lost the battery cover – here's a replacement. Recommended print orientation is vertical, as depicted in the screenshot, to provide strength for the latch and pins. The cover_brace.stl includes a 0.4mm wide buttress that supports the…
Hi, pumping out the air of these vacuum storage bags with the manual air pump is no fun. So I made this adapter by combining both listed models. Works great. It now takes only a few seconds to empty out a medium/big bag. my print…
Etui permettant un rangement facile du Dévidoir Amazon Basics pour ruban adhésif d’emballage https://www.amazon.fr/dp/B07PK99NR8
Hi, I recently made a amazon basic vaccum bag to dyson adapter, see here . Now I got myself this mini vacuum cleaner >> Tidy Cats; ST-6653Plus . And so I made a new adapter. It is not as fast as with my big dyson but it is much more handy…
A razor blade cover made to fit the Amazon Basics 3 blade razor blades
A mount which allows you to attach the wedge shaped hub to a magnetic surface. Contains a version with a hole for rubber feet on dell Optiplex PCs. It contains holes for 6x2mm neodimium magnets (used for gridfinity) and holes for larger…
This is a dedicated USB-A port holder designed to securely mount the female end of an Amazon Basics USB-A extension cable onto a wooden surface or wall. It keeps the USB port easily accessible and prevents it from moving around. The…
This is a simple and practical cable guide designed specifically for the Amazon Basics USB-A extension cable . It allows you to neatly organize and secure the cable to a wooden surface or a wall, preventing it from moving or sagging. The…
I bought a new Amazon Basics Ratcheting Screwdriver only to realize they didn't match my previous ones with the slight knurling on the shaft. This model provides a knurling to the entire shaft. I recommend printing this model with a raft…
These fit the Amazon Basic Markers which are a little smaller than the EXPO Markers this model was originally designed for. I also added some magnets on the back that fit the 8mm magnets that are about 2.6mm deep. When you print this you…
German: Dies ist mein erstes selbst konstruiertes 3D-Modell: Ein praktischer Kotbeutelspender, speziell entworfen für die Amazon Basics Hundekotbeutel (3,5 cm hoch, 6 cm breit). Das Modell besitzt eine integrierte Aufhängung auf der…
The simple ring you can personalize with different geometrical shapes.
The Amazon Basics steel 14" bed frame has hard plastic feet that slide around on smooth floors. These make the bed frame very solid. Print 12 of these in TPU with 20 bottom layers or 100% infill and a single raft layer with 0.0 spacing.
Remix for The Ultimate Cereal Container Filament Drybox - Official Remix The base is remixed to fit one of the most popular cereal containers available in Australia that can fit filament spools.…
Snap this onto your OpenGrid panel and keep your Amazon Basics screwdriver set locked in and easy to grab. No more digging through drawers — your driver stays neat, visible, and ready for action. 👍 Like & boost this model if it keeps your…
The original required me to file something off and used a separate screw and nut. I wanted to use the original nut and hand screw that was on the clamp (and I didn't want to damage my clamps), so I edited the model to make use of those.…
Print base down, no supports required. Will just slot into the box and be retained by the others around it. The part is 1.8mm lower than the original design so that it still sits flush with the others at the top.
A stand for the Amazon basics rechargeable battery screw driver for your desk/workbench (loose fit).
Laser 3d scan of the tool, 3d holder created in 3ds max, then exported to STL. Printed at 15% infill with 4 walls/perimeters. I just used PETG, i'm sure pla or asa would work identically.
For the 3 people out there who have the discontinued Amazon Basics-branded bookshelf speakers AND a 3D printer to make these covers! I stumbled upon these speakers in a garage sale with the covers busted, and I was determined to print the…
Resized to fit Amazon Basics / Denali Electric Screwdriver.
simple charger holder for amazon basics wireless charger
Adaptateur de réduction de largeur pour les bobines trop large ( jusqu'à 198 de diamètre ; Amazon basics, etc…) qui ne passent pas dans : Les AMS (Bambulab etc…) Le Buffer REWINDR (https://lgb-engineering.com/) Impression sans support en…
I designed this to replace the spool holder for my Ender 6 which is currently sitting on an Amazon Basics shelving unit. Requires one M3 screw (anything from M3x14-M3x24 should work).
I wanted to be able to get my notepad off the computer desk when I didn't need it, but still keep it quickly accessible. I designed this slide in holder that mounts with double stick tape and has a convenient finger groove for easy…
A wider version of the grippy-prototype to fit Amazon-Basics spools on it.
This is a remix of another design for a non-latching case for the Amazon Basics/Denbali Electric screwdriver and Parametric Latching Rugged Case design. I don't have access to Fusion 360 so I had to manually cut and splice the rugged case…
### Updated 9/11/24: Added no-zip tie opening model as recommended default. I have ran this for nearly a year with petg and no zip tie and not once had to readjust the brackets. They sit tight and hold over time despite the heat involved.…
This is a model of an AmazonBasics Screwdriver Bit Holder. It is designed to hold the 9 bits that come with the screwdriver set, plus the extension bit holder. The model includes a hole in the bottom to fit a magnetic USB-C swivel end,…
Replacement tube cover (cable pass trough) for dual arm monitor mount from Amazon Basics ( https://www.amazon.com/AmazonBasics-Dual-Monitor-Stand-Height-Adjustable/dp/B076B3Q8JR ). I received only one piece in the box so I decided to copy…
This is a holder for the Amazon Basics Smart Dimmer Switch and Remote for Music and Routines. The hole in the center is for help, if needed, getting remote out of holder using an allen wrench or something similar. Category: 3D Printing
I created this housing for an AmazonBasics Dimmer switch ( https://amzn.eu/d/hr5qsvP ) to use with a table lamp: I added it in-line to its power cable and, while a bit bulky, means I can move the lamp wherever and still dim it. To install…
Description If you work in a garage or a workshop in the winter, you know it gets cold. This mount solves the "freezing legs" problem by lifting your heater off the dusty floor and mounting it directly to your table leg. This was designed…
Wall mount the AmazonBasics tissue box to save space. The box is light so some good double-sided tape is enough Category: Household
Gridfinity storage unit for the Amazon Basics Spring Clamp set that Includes 3/4-inch jaw-open-size steel-spring clamps (x15) and 1-inch jaw-open-size steel-spring clamps (x5). It is 5 x 3 x 4 gridfinity units in size and will keep all of…
This is the 5th version of tool organizer I designed for my kitchen. This features a convenient, mostly tidy, way to store my most used utensils, a salt grinder, and cookbooks. The cookbook holder portion is optional if you have less…
A Gridfinity holder for Amazon Basics Brass Mini Brushes. ( https://www.amazon.ca/dp/B08D9QH3X3?ref=ppx_yo2ov_dt_b_fed_asin_title ). A snug fit. A magnetic base might be helpful.
Grundbausteine, parametrisiert, für OpenSCAD. Version 25, ersetzt v18 und v19 Rohr (tube) mit Fasen (ein/auswärts), Anschrägung (Konus), Sektor, uvm. Box mit Fasen (alle Außenwände) Stern (Objekte im Kreisbogen) Reihe (Objekte entlang…
This adapter allows small electric air pumps (inflatable mattress style) to be used with Amazon Basics vacuum storage bags. Link to Amazon Basic Vaccum Storage:…
Created this for the honing guide that came as part of an Amazon Basics Chisel Kit which had the following angles documented: Chisels: 30 degrees - 30mm 25 degrees - 40mm Planes: 30 degrees - 38mm 25 degrees - 50mm Adding the F3D with…
Print the base on its side so that the layer lines are aligned with the drain channels. Add picture frame bumper feet if desired. A brim may be necessary. The brush support clicks into place. No glue needed.
The original model by MyStoopidStuff is great, but the 3.5mm audio extensions we had on hand were too large in length and diameter to fit the original model. This remix increases both the accepted length (all the way to the strain relief)…
Printing Material and settings should not be all that important. 0.4 nozzle with 0.2 layer height walls and infill: defaults will be fine print orientation: same as STL OpenSCAD Requires HSW lib and BOSL2, see here for detail .
Printed in PLA+. Layer height .2mm, 5% infill. Print the insert in a different color.
Under desk mount for 3.5 stereo extension cable. Link to the original onshape model: https://cad.onshape.com/documents/f0a44c5af6fe94e61e1652d5/w/4d3ee5d75116c0d2216b644a/e/916d9b1e973514e8fa424e06 Link to the exact cable I use (from…
Made this model after being fed up with my cable getting tied around the legs of my desk chair, short print time and some glue or strong adhesive can be used to secure it.
Hello everyone, I was looking for a dockingstation for my Sony wf-1000xm3 wireless earbuds but couldn´t find a fitting thing for me. My plan was to have a cover on the backside to hold the cable in place (and to look nice and even of…
This is a low-profile, high-rigidity under-desk mounting bracket designed for a standard HDMI splitter. It features an open-back and open-front layout to allow seamless HDMI and power cable routing without restriction. The inner cavity…
