Liczymy pasujące modele…
The Phaetus Dragonfly BMO Adaptor for BMG + Ender3 Phaetus, a supplier of core parts for high - end 3D printing equipment Focus on the upstream market of 3D printing Supreme Pursuit ►Follow Phaetus to get the latest adaptors for your…
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
Since Hubmotors are very usefull for combat robots, but only existed for 450g weightclasses and up, I created one that can be built from a 2202 brushless motor and only weighs around 35g (including mounting screws). You can get it down to…
You will find a Zip file with all the parts for each model, and I have also attached an assembly so you can see a 3D representation of each figure.
If you have any questions or suggestions regarding the model, please write. I will be happy to read them.
This is a filament guide sleeve for the Dragonfly BMO for use with the Filametrix filament cutting tool-head. It is designed to keep the filament in place during the cutting move. Required Items: 1x 3mm brass heat-set insert 1x length of…
Case for my raspberry pi BMOtv project. Very similar to the Simpsons TV by Brandon Withrow. Here's the GitHub page it's still a work in progress so check back for updates.
got tired of misplacing my juul model is oriented as it is intended to be printed no supports necessary has a cavity for a 6x3 neodymium magnet included in model glue in the magnet, color BMO's features (if you'd like) and enjoy
I designed these weapons to be used with the Just Cuz Robotics RDY-MINI-5022 antweight hubmotor. So far only the “LeadingEdge” has seen real combat. It had several full speed hits against the arena walls and came out with only chipping…
🕹✨ 3D Model of BMO 🌟📺 Bring the lovable BMO from Adventure Time to life with this detailed, 3D-printable model! Featuring an accurate and charming design, this model is perfect for fans, collectors, and creative projects. Ideal as a…
Hello! Thanks so much for being here! This project was a long time coming. I've been wanting to design a 3D printed BMO since before I started in the hobby. I poured a lot of time and effort into this project, and I'm so stoked for people…
3d printed case for the Pubmote project , a VESC onewheel tilt remote. Hardware Requirements 5 x M1.7 screws CowPowerSystems development PCB LilyGo T-Display S3 Amoled (1.43in) PS5 Hall Joystick Battery (this one fits the 51mm x 31.25mm x…
this is a case for a DIY cowmote/pubmote for your onewheeled vesc devices. i ended up trimming about 3-4mm off the ps5 stick to make it more low profile. 6x m3x8mm needed to seal case and connect screen holder to the inner cover * this is…
this is a case for a DIY pubmote for your onewheeled vesc devices. * this is still an active work in progress. print at your own risk.
Remix of the original to support magnets https://www.printables.com/model/514178-bmo-llavero-bmo-keychain
Liven up your workspace with a helpful BMO case to tell you the humidity and temperature! There is a solid version with just the arms printed separately, and a version with individual buttons if you want to have the most accurate BMO.…
The Phaetus Dragonfly BMO Adaptor for BMG + Ender3 Phaetus, a supplier of core parts for high - end 3D printing equipment Focus on the upstream market of 3D printing Supreme Pursuit ►Follow Phaetus to get the latest adaptors for your…
this is a case for a DIY pubmote for your onewheeled vesc devices. * this is still an active work in progress. print at your own risk.
A printable version of BMO from adventure time. Can be printed solid in a single color or in separate pieces. I recommend printing with BMO sitting upright. The arm pieces may need a brim, and a 0.4 nozzle is best for the smaller pieces.
Minimal support is required, please glue the back and BMO carefully and make sure the case can still move, all parts include a minimum tolerance of 0.4mm.
HELLO! I have designed BMO from Adventure Time. He is sitting, chilling as hell. I have made 2 different models 1- For multicolour printers, where the complete BMO is and you can paint each piece with Bambu Studio or similar. 2- Another…
This is a remix of this toolhead: https://github.com/Annex-Engineering/Annex-Engineering_User_Mods/tree/main/Extruders/Sherpa_Mini/Toolheads/EdwardYeeks-Voron0 to allow the use of zodiac x phaetus BMO hotend (which has a non-removeable…
3d printed case for the Pubmote project , a VESC onewheel tilt remote. Thanks to Markoblaster for designing the original. This version fixes a handful of flaws in the original design and introduces some quality-of-life improvements.…
Use this as just a heads up display clipped to a strap on your wrist, wrist guard, belt, velcro… you can also attach separate usbc joysticks ( stick and knuckle ) for all your tilting pleasures.
Use this as just a heads up display clipped to a strap on your wrist, wrist guard, belt, velcro… you can also attach separate usbc joysticks ( stick and knuckle ) for all your tilting pleasures.
I wanted to replace the hotend on my Prusa Mini+, but only had a Dragonfly BMO handy. I can not take credit for creating this remix, as i had Jakub ( https://www.fiverr.com/jakub_junek ) create it for me! and he did a great job.
LOTS MORE! DeskBuddys here: DeskBuddy Collection by Me3D | Printables.com Rate, like & comment if this tiny console has more emotional range than you do. Recommended Print Settings: • Layer height: 0.16 mm • Line width: ≤ 0.35 mm • Detect…
Hey there, because i wasn't easily able to get the magnets Bmorr used, i remixed the design to use more standard round 5x2mm magnets. Yes, you can see them when the box is open. Yes, it will not be as strong as the original, but i can…
see as well: https://www.thingiverse.com/thing:7099082 Print Settings Rafts: No Supports: No Resolution: 0.14 - 0.28 Infill: 45% Filament material: ABS (ASA should work as well, PLA might get too warm, it's quite near the heatblock…)…
I always liked BMO in Adventure Time, and also liked the message behind it “Be More”. Added extra "cap" to fit on with 0.1 mm extra spacing in the model. Uploaded in STP and STL files also. Any feedback are appreciated. Enjoy.
Fix ur Doxy to a Bamboo pipe, add a rope. Happynes shall happen;D
Big thank you to Stefan for the original design. I took the same approach and used the same concept for the silicone sock mold. The only difference is the thickness, which I increased from 1.5 mm to 2 mm. The beveled version of the sock…
Easy to print. No supports. You can use it as a phone stand if you place your phone on its legs. I used PLA to print it. I hope you enjoy it!
3d printed case for the Pubmote project , a VESC onewheel tilt remote. Hardware Requirements WaveShare ESP32-S3 1.43in Amoled Display PS5 hall joystick Battery 1500mAh Lipo battery (this is the one the case is designed for, but others of…
The Phaetus Dragonfly BMO has a removable E3D clamp, once removed it has a M8 threaded insert that is larger than the PTFE tube. I designed this 6.5mm deep M8 thread with 4.2mm inner diameter for the PTFE tube. Additionally, I added a…
Zodiac and phaetus some months ago teamed up and released a hotend that could change nozzles with one hand, but only with the correct mount. This is not the perfect solution but if you are lazy like me and do not want to disassemble the…
Features Fits single-sleeved Commander ( 100+ cards ) with token space Magnetic lid (uses 8× 4×2 mm magnets); strong hold, easy open Commander card display in BMO’s screen Smooth, rounded edges for comfort and style TCG-compatible: MTG ,…
Since Hubmotors are very usefull for combat robots, but only existed for 450g weightclasses and up, I created one that can be built from a 2202 brushless motor and only weighs around 35g (including mounting screws). You can get it down to…
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Say hi to BMO - the most wholesome little console from…
Buddy3D Kamerahalter für Prusa CORE One – Verbesserter Deckel mit Schraubmontage Überblick Dieser Kamerahalter ist eine verbesserte Lösung für die Buddy3D Kamera des Prusa CORE One 3D-Druckers. Im Gegensatz zur Standard-Magnetmontage…
👍 Don't forget to Like and Collect this, so you can easily find it later! ⭐ If you like my models and that I make random minis for people then come follow and support me on Patreon…
You will find a Zip file with all the parts for each model, and I have also attached an assembly so you can see a 3D representation of each figure.
This is an enclosure I created while making my BMO embodied local AI agent. A full video break down of the project is available here: 🔧 Additional Hardware: Raspberry Pi 5 (16GB) Pimoroni NVMe Base Duo Geekworm X1203 5V UPS shield…
If you have any questions or suggestions regarding the model, please write. I will be happy to read them.
This plunger is designed to be a solution to removing the faceplates for the BMO Token Holder. You won't have to look for a pen to swap the faces on BMO anymore. Use a raft to print the inner plunger part. Before installing, run the…
These files will help when converting from the standard E3D Hotend to the Phaetus Dragonfly BMO Hotend on a Prusa MK3S+. Follow print instructions for MK3S+ printed parts ( https://www.printables.com/model/57217-i3-mk3s-printable-parts )
Yo no tengo una impresora prusa así que me costo mucho hacer este modelo de BMO de hora de aventura lo hice en tinkercad con mi propio teclado y mouse. Lo encontré muy divertido ya que BMO tiene la misma forma que la core one +. Espero…
A highly detailed BMO collectible figure inspired by the beloved Adventure Time character. The figure features BMO's iconic mint-green console design, complete with a cheerful smiling face displayed on the screen, colorful control…
In my Michael Baddeley Mk III Astromech droid, I am intending to install the hubmotor variant of the foot drives (which commonly use four inch UUMotor or L-Faster motors), rather than the standard belt/gear/chain drives that many builders…
If you want to support my work, buy me a coffee RatRig V-Minion reverse Bowden w/PC04-M8 by dragonfly BMO 2 cap head M6x12 2 T-Nut - Drop In for 3030 - M6 1 Bowden adaptor by Phaetus dragonfly BMO
No Soldering or Custom PCB Required — BMO Thermal Printer Remix This remix upgrades the original BMO Local AI Agent with online AI model support, an integrated thermal printer, a rear camera mount, and a simplified solder-free control…
I've tried many printed end effectors for my heavily modified Anycubic Kossel Linear Plus, but none really worked for me, so I decided to make my own. This model lets you use the rigid mount of your Phaetus Dragonfly BMO (just unscrew the…
UPDATE 17.02.2022 Added a simple Duct for the 4020 Mod UPDATE 10.02.2022 I was not satisfied with the cooling performance of the component cooler, so I bought new fans that blow properly. They are 4020 radial fans without an air nozzle,…
Who WOULDN'T want their own life sized BMO who could say nice things and help control their 3D printer?? I love using Octoprint to control my 3D printers, an open source plugin and web interface that gives incredible remote access to any…
This is a simple torque arm which I designed for my DIY e-bike powered by a 500W direct drive hub motor since the other design I ordered didn't fit. You will need to adjust axle angle matching to your bike. I suggest to print out in PLA…
Dragonfly BMO hotend without collar adapter. The original model didn't have a separate version that didn't have the collar and I couldn't find a model for it, so I modified the step file from Phaetus' website . Included step file and stl.
About A BMO Nintendo Switch Stand. Meant to be roughly the correct proportions as shown in the show given the size of the face. There is also quite a bit of extra storage space in the back. If you want something easy to print that doesn't…
E3D V6 collar mount wasn't fitting even after messing with flow on cura. Made the hole bigger 0.15mm bigger, so it fits snugly on my E3D. Included .f3d file so you can adjust it yourself. I suggest to print the original, and then adjust…
BMO from Adventure Time This model was inspired by this beautiful character, its my first attempt modelling a 3d keycap, and im very happy with the results. The way it attaches with the switches its not quite as precise as I would like,…
Untested mount for the Dragonfly BMO on the mantis xol2 toolhead on the voron 2.4/trident.
Ipad mini 4 LAMP Bmouo Case attach with microsuction tape the second keyguard had tabs that slide under the case.
Hotend assembly for Ender 5 using Dragonfly BMO, M3 bolts and nuts and heat inserts
BMO stand for Nintendo Switch. With him you can play in "arcade mode" or in dock mode, but if you just want to make your switch beautiful I appreciate you. I made this action figure of BMO for training myself in 3d modeling, but also for…
**Build instructions, code, and downloadable files available at BMO-AI: The companion robot with artificial intelligence - Hackster.io This artificially intelligent companion robot utilizes the following AI APIs to deliver engaging…
I have a YouTube series documenting how I set it up. It should give you an idea, but keep in mind it was intended more to be entertaining than instructive. https://www.youtube.com/playlist?list=PLHcXUO0tVZqc_A_hYahgxZOrVOI6vnqMH I learned…
NOTE: If you intend to use a 3.5" screen for BMO's face, this model works, but I have published an improved version of BMO that is made to fit a 7" touchscreen. Check that one out. It's better. This project is an enclosure for a Raspberry…
Design of BMO from Adventure Time. The most basic of all my BMOs.
Files split for different colors. Used fox-hound64s file as a reference and made it fit a tissue box.
Made this cause I'm on an Adventure Time Kick. There's two variations of the legs and arms and 5 face variations. Parts may not fit perfectly and may need to be sanded or glued. Should measure about 6-7 inches. Be sure to post a make and…
Pequeño llavero de BMO que es una mini consola en la caricatura de hora de aventura. Tamaño: 21.4mm x 12 mm x 25 mm.
Simple and cute BMO 3D model to be printed. Attached photo is my own make of the print.
I wanted to add the Phaetus Dragonfly BMO to my Qidi X-Plus 2 printer. The mounts on the stock dual gear extruder are an exact fit for the Dragon, but the Dragonfly mounting holes come in a 24 degree angle. So I made a modified part for…
- 8x3mm magnets to be glued in - 15% infill used in example - Big Note on this print: I used a layer modifier to add ironing from 3.5-4.5mm. This allowed for better quality of the outline, to avoid gaps etc., without ironing every top…
Who wants to play video games ?! - BMO ( S1 E23 “Rainy Day Daydream” ) Decorative panels which feature BMO's funny little face and all his buttons. These panels are designed to fit specifically to the Cooler Master Qube 500 Case with pegs…
Quick model that I used to think out a helmet based on BMO from Adventure Time for a cosplay. Modeled to fit my head, and could be printed at full-scale if you chopped it up in the slicer. Barebones and probably should be adjusted for…
ABS 0.1mm layer height 100% infill I print multiple on 2 layer raft. Paint with 000 brush and acrylic paint that been thinned a little with water. Coat with acrylic gloss medium. CA glue pin tie back on.
