Liczymy pasujące modele…
I found this focus wheel at https://www.thingiverse.com/thing:714475 , but it was 11.1mm thick and it made my camera look like a toy so I created a much slimmer one. My final design comes in at 4.4mm so it is much more compact and works…
Having a 3D printer without a camera is like driving at night without lights. I decided to create a base that doesn't require any alteration to the MK4 and can also serve as a starting point for others to create their own camera support.…
After trying different ways to mount my Logitech c920 onto my Ender 3, I decided I wanted a way to mount the camera off the bed or Y axis. I came across @SCHEMENKE's design for an iPhone mount and thought it was a brilliant design. So,…
1. Introduction This is a remix of a remix (Scatterthought) of a good Logitech C270/C310 Focus Ring design. I just add my contribution ;) -Tighter tolerances between ring and cover. -Change the “gear” design to better grip the lens.…
Update 2019-09-29: Added a few more photos to help illustrate the disassembly and assembly process. I'm using a Logitech C310 webcam in conjunction with Octoprint on a Prusa i3 MK3 (and another on a MK3S). The focus setting on the C310…
Edited: Use the new (much better) version here: https://www.printables.com/model/653554-ender-3-v3-se-c270-camera-mount A Logitech camera mount for the Ender 3 V3 SE. Glue the two dovetailed parts together with CA glue. Mounts to the 2020…
I found GeekToybox's focus wheel a bit to short. I added longer pins to the wheel to help it grip better. Works with both the Logitech C270 and C310
The model files are not mine. However, I was able to assemble exactly what I wanted by combining files from different projects. For this reason, I wanted to collect and publish it for those who want to make a similar montage. You need: M5…
No screws needed. Just print and use. ... I think black will be better)
If you run straight cable to the camera Tapo supplies a waterproof cover for the wire but for wireless, no cap supplied for the exposed RJ-45. I made one just for that purpose. Sorry for not having a better photo but I did this last year…
print with 96% size for a better hold the strut is longer than the short original and attached further down
Another Focus Wheel for Logitech C270 / C310 Nice touch and better grip Gives access to full range of focus
Contoured mount for Bosch 12 PSC31 and PSC41 drill, and impact driver units. Fit Ikea Skadis, including inside Vattenkar. Some support required.
Description Need some Privacy? Privacy Lens Cover Logitech C310 Easy use, just snap on! You like my Work? Support my efforts and leave a like ❤️ Make my day and post yout Makes 🤗 Print instructions Simple print! No support needed! PLA and…
Webcam standard to enable a single TP-Link Tapo C310 camera view two 3D printers. Uses a 40mm PVC pipe of any height. Both the base as the platform can be printed without supports. Put the platform circle on the base plate of the printer…
A friend of mine wanted to mount his Sofirn SC31 Pro in his car and asked me to knock up something simple he could use with cable ties. This is it. I made two versions for different mounting options (vertical/horizontal), both are in the…
It's a remix of Opus BT-C3100 - 80mm Fan Mod by ShrimpStar with vertical fixation. I use wood screws Ø3.5x16mm. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: IceFilament…
TP-LINK TAPO C310 MAGNETHALTER Ich bin auf das Problem gestoßen das ich meine Kamera leider nicht direkt an Wand / Decke verschrauben kann. Allerdings ist die Decke mit Blechpanelen versehen. Deshalb habe ich diesen Halter gezeichnet um…
You can buy one of these diffusers from me here! Consider supporting us on Patreon! Please see the assembly instructions photo! No supports required! This is a flashlight diffuser that distributes the light radially and downward to…
I like the design for the Logitech C270/C310 webcam holder for the Prusa i3 MK3/S from GiantBrain very much. Thanks for that! Unfortunately the mounting hole for the x-axis is just suitable for one single position and allows no movement.…
Not much to say, it's a clip on mount for a C270 webcam inside a Creality enclosure. I printed mine in PLA and it snaps on nicely and stays in place with a bit of friction. PETG probably also works for higher enclosure temperatures.
Opus BT-C3100 Battery Charger wall mount. With cut outs for ventilation and jacks. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0,2 Infill: 100% Filament: 3DE Premium PLA Black Notes: The…
Remixed to fit the Tapo C310 outdoor camera to a 17mm tube frame. Print standing. Use M3x25mm bolts
The photo shows the original clip on the left, the reproduction, and an installed reproduction clip. Note that you should print this with a 0.25mm nozzle using high quality settings on your slicer. The model was made using SAE…
A simple support/wall/Ikea Skadis mount for the OPUS BT-C3100 battery charger. Other supports available rarely take in account the air intakes. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes Resolution: 250…
The older Dyson models came with a charging dock, but for the middle-child in my Dyson vacuum family, the DC-31 didn't come with one. This will work with the DC-35 too but that model already comes with a dock Note: Based on recent…
Hi, its my bike light holder. handlebar 30-35mm light 21-25mm you need: 1x screw M3x40 1x screw M5x15 1x screw M3x16 1x nut M5 2x nut M3
Printed it with PLA (Glow in the Dark) Infil 20% 0,2mm Layerhight 2 Contour lines Seems to be sturdy. Not fieldtested yet.
BOM : 3 x m3 heatset insert (Length 4mm, OD 5mm) - from Voron BOM 1 x m3x20 SHCH 3 x m3x8 BHCS 1 x m3 T-nut or hammered T-nut Just disassemble your C310, and keep the cable and the PCB (you can unplug the cable from PCB with the connector…
A simple stand to mount a Tapo 310 camera to allow it to stand up. Legs stop camera falling over, simple design for quick printing. Stand will wobble when touched, but as the nature of the camera is to set and forget, this shouldn't be an…
A friend of mine is restoring his Nissan Laurel C31. It's hard to find a bonnet badge, especially in good condition, so I've created a model using an old damaged one.
First used this adapter I found: https://www.thingiverse.com/thing:3028588 but I didn't like the results it gave, there's too much bounced light coming into the sensor giving a very purple hue to the image. I made this one to screw into…
This pole can hold two Tapo C310 TP-Link cameras. I use it to monitor two 3D printers. The object consists of a base plate and a top mount. In the base you have to place a vertical PVC pipe of 40mm thickness.
This is a Logitech C270 / C310 style mount for 20mm vslot extrusion. It was designed specifically to mount to the outside of the 2020 vslot extrusion on my Talos3D Tria delta printer. It is oriented in such a way that I can use the webcam…
Magnetic/tripod mount for a Logitech C310. Changes to Magnetic camera mount : Larger hole for the tripod screw Moved tripod screw hole to accomodate larger mount plate 6x 6mm magnets instead of .3x 8mm Changes to Tripod mount for Logitech…
Pieza para sujetar la Webcam de Logitech C310
Wall mount for Tapo C310 and Tapo C320 cameras. The cable is routed through a conduit with a diameter of 2 cm.
Here's a mount I created to attach a Logitech C310 to my Ender 3. I have it attached to the back. I think it should also work on the front, but I haven't actually tried this. The arm and mount are separate parts which are attached with a…
BOM : 3 x m3 heatset insert (Length 4mm, OD 5mm) - from Voron BOM 2 x m3x16 SHCH or BHCS screw 1 x m3x6 BHCS Original m5 BHCS M5x10 might be too short, so use a M5x12 or longuer Just disassemble your C310, and keep the cable and the PCB…
Based on the parameterized rugged box design from Whity I made this remix to fit 2x Dyson DC31 Batteries snuggly with a divider and a bit of a taper to slot them in. This is for my spare batteries for my old (but still going strong!)…
I designed an extra piece to mount our AngelCare AC315 baby monitor on the "Modular Mounting System Arms - Customizable" by 6d6178 (printables model 185322)
I was looking for a holder for my Webcam C310 from Logitech and found one on Thingiverse, but the viewing angle didn't suit me and I optimised it for my needs. I have mounted the High Flow kit from Creality and the new nozzle sits a…
This is a Sofrin SC31 Pro mount for your Honeycomb Storage Wall. I'll be honest - it's not great? The clip holds the flashlight more tightly than the HSW insert holds to the wall, so when you try to grab the flashlight the whole thing…
This is about .1mm too large but I like to sand down the hinge pins for a snug fit. Specs: Total 4mm x 4mm x 35mm (L x W x H) 4mm x 4mm x 2mm cap 3.2mm x 3.2mm x 33mm shaft Specific model that this pin works for:…
Mounts the TP-Link Tapo C310 to the right of the Prusa MK3 printer. Two versions: one is extra sturdy. The camera is fixed using three M3 bolts and nuts.
The desired shape can be given by increasing the number of chains. make the filling 0, make the number of walls 99, it will be more solid. print vertically otherwise it will need support. requested; M3 Bolt (25mm) M3 Nut
Here is a simple mount I use for my Logitech C310 webcam on my Ender 3. This mount require 1 (or more If needed) 8mm rod . This allow to the Webcam to be far enough from the print and get a good view, but not too far to save some space.…
Dyson DC31 extension parts to function like a DC35. Requires a donated tube. I used a metal tube (outer diameter 28.7mm), but you could use a rigid plasitc tube. You also need to add a small spring for the catch. The one I used is 19mm…
1/4"-20 and M5 mount for Logitech C310 I wanted to mount my C310 on an arm on my 3d printer for Octoprint, didn't find a good mount I liked for the camera. Changelog 2021/03/26 - Initial commit Design Autocad Fusion 360 Slicer Ultimaker…
Adapter to mount Logitech camera on 1in bar stock. Should print without supports in either orientation. Part may be mirrored to maintain center alignment when the camera is hanging. Additional Materials Required: M3 x 20 M3 Nut 1 in Wide…
Basic loose fitting Opus BT-C3100 battery charger gridfinity container
Stand for aku chareger Opus BT-C3100 Stojánek pro nabíječku Opus BT-C3100
Description Flashforge Adventurer 5M Mount for Logitech C310 Webcam. Refer to https://www.printables.com/model/1443196-flashforge-adventurer-5m-ad5m-tp-link-tapo-c100c11 The design is divided into six parts. C310 font cover C310 handler…
Needed a mount for my webcam in my home office. My desk sits 45 degrees to the shelves on the wall. My shelf is 19mm thick but it shouldn't be too difficult to modify to fit any thickness shelf. Print Settings Printer Brand: Creality…
This is a small bracket for mounting a Logitech C310 webcam to the print head of your Anet A8 so that you can monitor the print nozzle. Since it simply inserts into the bearing block it might work on other printers with similar design.…
To mount a C310 Camera, you'll need to drill a hole into the camera for an M3 screw, which will secure it to the mount using an inserted M3 nut. I recommend taking off the two screws from the default mount beforehand. This way, you avoid…
C310 box fits C510 as well. B525 is a slight adaptation of the C310 box for the autofocusing lens and screw holes that were moved a couple of mms. Use with C310 lid. C310/C510 and B525 size are 59x25.4 mm and ~ 20mm deep (including lid)…
Two Trees Bluer C310/C270 Magnetic Holder Requirement; 1x M3x25mm Bolt. 2x M3x12mm Bolt. 4x 10x2mm Neodymium Magnet.
Attaches to the left z-axis motor on your Prusa, requires the bottom posable clip of the webcam to be removed. Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: Yes Resolution: .10 Infill: 25% Filament:…
Due to circumstances I need to run Linux from an nVME in a ICYBOX nVME enclosure. As I sometimes need to carry around the laptop I was looking for something that would let me fix it to the computer. So I designed this in OnShape. Luckily…
Touchscreen side camera mount for the SainSmart Coreception-300. Camera mounting block permits vertical angle adjustment and the horizontal angle adjustment is made using the horizontal bracket, hinge & clamp block. The horizontal bracket…
Modified bottom bracket for attaching the Sofirn flashlight. The mount has a cutout for a clip.
A mount for the Anker C310 that lets you put the camera on a table or desk so you can use it for video conferencing. Low profile so the camera and mount will fit underneath a TV and takes a regular 1/4"-20 countersunk screw.
This mount allows you to attach your Logitech C310 webcam directly to the X-axis of the Anycubic Vyper 3D printer. By mounting the camera to the X-axis instead of a fixed position, the webcam will always maintain a consistent view of the…
Fan conversion from standard to a 30mm x 30mm fan. I have used a raspberry case fan Be careful on which fan you decide to put on as it may be as noisy as the original so pick a suitable quiet fan
The TPLINK TFC311B20 does not have a Wallmount option. So here is one. I heard this TP Link Model is requiered in some areas.
Opus BT-C3100 Battery Charger HSW mount. Just Added holes to fit with Honeycomb Storage Wall
A simple remix of the Prusa MK4 camera mount Warning: When printing download everything you would need with the og camera mount (except base) and the other thingiverse model except part 2. Sorry for the esl it is usually not this bad but…
Lightweight tilted holder for Opus BT-C3100 / BT-3100 battery charger. Key features: - Minimal filament usage: main holder ~14 g (at 3 walls/perimeters) + stabilizer ~12 g (optional — needed for better stability; skip it for maximum…
I used my extensive knowledge of Tinkercad to make this basic change because I wanted to put the charger on the side of a dresser and did not want to create holes in the furniture. A few of the ports are not slightly blocked but I don't…
I added the mount from sj to the case from Rasmussen . So I can use the internal NVMe and another one via the external USB-case together.
A small flashlight clip for your Sofirn SC31 flashlight, or other compatible 7mm High 21mm diameter flashlight needs. Preferably print in ABS or something else stiff and strong. Print diagonally to reduce points of failure.
--- for english please scroll down--- --- moved from MyMiniFactory --- Das Raidsonic ICY Box IB-247-C31 Festplattengehäuse ist hochwertig und bietet eine flotte und stabile USB-C-Verbindung, aber es nimmt nur SATA-Platten mit maximal…
If you want to update the firmware of your Sofirn SC31 Pro and you had a newer revision with exposed UPDI pads, you can use this adapter with pogo pins to easily flash a new firmware to your Sofirn SC31 Pro. Print instructions Printed…
Logitech C310 Laptop Camera Holder to replace a broken one
I made a few small tweaks to jshank's design to the support the Logitech C310 and turned the holder upside down to leave more space under the webcam. This is my first time even using blender to model. Prusa Slicer will complain about the…
This model requires the base model's parts to be useful, Printing information: Print in PETG for slightly more flexibility of the cap. Print the model on its flat side and add a brim if needed. Check out the base model for more…
Tapo C310 mount - attaches to the top of a DN32 PVC pipe using the wall mount. Pipe dimensions: Outside diameter 42.3mm, Inside diameter 37.5mm.
Fire extinguisher intended for Marine use model WBDL_ABC310VBL. I provide two model, one super tall depending the place who when to fix it. The simplified model to fix on the wall and take it easy. I made it in PETG black. I also made i…
A small retro television built around the Waveshare ESP32-C6-Touch-AMOLED-2.16 . The head tilts open on a friction hinge, the screen powers on in snow, and a knock on the cabinet tunes the picture in. Your phone is the remote: the set…
This is a better Sofrin SC31 Pro mount for your Honeycomb Storage Wall, compared to the one I previously put together . It just kinda slips in. It's super easy to grab and use the flashlight quickly. It holds it surprisingly well,…
The IB-CR404-C31 is an awesome little CFexpress Type B card reader in a super solid anodized aluminium extrusion housing. Unfortunately especially the built in heat sink fins are quite sharp on both faces. This has always annoyed me and…
The TPLINK TFC311B20 does not have a Wallmount option. So here is one. I heard this TP Link Model is requiered in some areas.
ZC31S Suzuki Swift Sport Bumper Hole Filler This custom bumper hole filler is designed for the ZC31S Suzuki Swift Sport, specifically for vehicles running a single-exit exhaust in place of the original dual-exit setup. The model is based…
Wall mount for Tapo C310 and Tapo C320 cameras. The cable is routed through a conduit with a diameter of 2 cm.
This is a better Sofrin SC31 Pro mount for your Honeycomb Storage Wall, compared to the one I previously put together . It just kinda slips in. It's super easy to grab and use the flashlight quickly. It holds it surprisingly well,…
Lightweight tilted holder for Opus BT-C3100 / BT-3100 battery charger. Key features: - Minimal filament usage: main holder ~14 g (at 3 walls/perimeters) + stabilizer ~12 g (optional — needed for better stability; skip it for maximum…
Fire extinguisher intended for Marine use model WBDL_ABC310VBL. I provide two model, one super tall depending the place who when to fix it. The simplified model to fix on the wall and take it easy. I made it in PETG black. I also made i…
I made a few small tweaks to jshank's design to the support the Logitech C310 and turned the holder upside down to leave more space under the webcam. This is my first time even using blender to model. Prusa Slicer will complain about the…
ZC31S Suzuki Swift Sport Bumper Hole Filler This custom bumper hole filler is designed for the ZC31S Suzuki Swift Sport, specifically for vehicles running a single-exit exhaust in place of the original dual-exit setup. The model is based…
UV Doorbell C31 Protective Cover Upgrade and protect your doorbell with this precision-engineered 3D printed cover, designed specifically for the UV Doorbell C31 model. Description: This custom-fit cover provides a clean, modern look…
Top mounted fan duct for standard 70mm Muffin Fan for Asus RT-AC3100 or other AC88u router. This is not my original idea but I completely designed this version from scratch to fit a 70mm fan (what I had around). Hot glue it to the router…
Fits for the Model IB-RD3621-C31. I guess it could also fit the IB-RD3621U3 which looks to have the same housing. Prints without supports. Face with the fan cut-out on the bed.
Just a real simple quick design. I made a cap cover for the SC31 Pro flashlight. I printed in TPU. I had to do +/- 0.5 to 1 percent on scaling in the slicer to dial it in, then imported those changes to the file. I've included both STEP…
