P
PrintablesPhilippe
Support chargeur montre Samsung watch3
Ce support permet de recharger une montre Samsung Watch lorsque l'on a mis un bracelet qui ne s'ouvre pas en 2 parties
- Pobrania
- 102
- Polubienia
- 5
- Ocena
- 5
Wyniki wyszukiwania: ch3
Liczymy pasujące modele…
P
PrintablesLestro
YJ board CH341A Serial/Memory Programmer Enclosure
YJ board CH341A Serial/Memory Programmer Enclosure YJ board CH341A Pro Serial interface / Memory Programmer Case with exposure of ZIF socket and DuPont connectors. The enclosure holds the board snugly. Led Light pipes optional part but…
- Pobrania
- 761
- Polubienia
- 53
- Ocena
- 5
P
PrintablesWildVal
OneBlade and Mach3 holder
Razor holders for wall mounting in the bathroom. Glued to the wall using double-sided tape 58x58 mm.
- Pobrania
- 757
- Polubienia
- 200
- Ocena
- 5
P
Printablesbyteborg
CH341 programmer enclosure with holes for LEDs
top_* and base_* are original files from the upstream project. I added topholes.* with added holes for LEDs.
- Pobrania
- 392
- Polubienia
- 23
- Ocena
- 4,5
P
PrintablesMedelis3D
Gillette MACH3 Handle - easy print
Enjoy... Print Settings Rafts: No Supports: No Resolution: 200 Infill: 5 Notes: no support or raft needed Category: Household
- Pobrania
- 369
- Polubienia
- 18
- Ocena
- 4
P
PrintablesNokedli
Gillette Mach3 Razor Travel Case
This design is based on Jimbo70's Mach3 Razor Travel Case with a few improvements. Changes include: - tighter tolerances (original was 1mm) → snap mechanism works better now - redesigned text (file without text available too) - rounded…
- Pobrania
- 352
- Polubienia
- 58
- Ocena
- 5
P
PrintablesRESTLESS DESIGN
Gillette Mach3 Case
This is a (travel) case designed for the Gillette Mach3 razor. It has included vents allowing the razor to dry. I printed it in matte black PETG to withstand higher temperatures and to provide some impact resistance through flexibility.…
- Pobrania
- 302
- Polubienia
- 30
- Ocena
- 5
P
Printablessalamantos
Razor holder for Gillette Mach3
This remix supports Gillette Mach3 razors
- Pobrania
- 296
- Polubienia
- 25
- Ocena
- 4,67
P
PrintablesXargas
Gillette Mach3 Razor Stand
I found this razor stand for Gillette Mach3 on Thingiverse, but did not find any on Printables. This upload should make it easier for others to find a suitable stand. I am not the original author. Please see the Thingiverse link for more…
- Pobrania
- 261
- Polubienia
- 27
- Ocena
- 5
P
Printablesniget2002
Gillette Mach3 razor stand
Simple stand for holding a Mach3 razor. Will probably fit other disposable razors. Print it laying on it's back and you won't need supports.
- Pobrania
- 220
- Polubienia
- 25
- Ocena
- 5
P
PrintablesElephant's Foot
CH341 Enclosure Top Cover with Trimmed Programmer Connector Clips
A modified CH341 enclosure top cover with trimmed programmer connector clips in order to avoid stress on the enclosure.
- Pobrania
- 207
- Polubienia
- 15
- Ocena
- 5
P
Printablesdemanu
Samsung Watch3/Actice2 Smartwatch Charging Station
I created this charging stand for my Samsung Watch3. I'm sure it will also work with a Samsung Galaxy Active2. Some double-sided tape is needed to keep the charger in the mount. Print Settings Printer: Hypercube Evolution Resolution: 200…
- Pobrania
- 205
- Polubienia
- 23
- Ocena
- 4,5
P
PrintablesJimbo70
Mach3 Razor Travel Case
This is a snap fit box to store a Mach3 Razor. It is ideal for travel since it can hold 2 extra blades. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: eSun PLA various…
- Pobrania
- 199
- Polubienia
- 35
- Ocena
- 5
P
PrintablesMatthias
Simple case for CH340 USB to TTL UART converter
A simple case for the cheap CH340 USB to TTL UART converters that are sold as bare boards. Allows access to the 5V/3.3V selection jumper and reading of all pin labels.
- Pobrania
- 196
- Polubienia
- 14
- Ocena
- 0
P
PrintablesWSlomo
CH341APro / CH347 programmer enclosure
This compact and practical enclosure is designed to fit the CH341A Pro programmer perfectly. The enclosure should fit the CH347 programmer. It protects the device against accidental damage while maintaining full access to all ports and…
- Pobrania
- 185
- Polubienia
- 18
- Ocena
- 4,5
P
PrintablesPhil
CH340 CH340G box
Remix from https://www.thingiverse.com/thing:2527773 Added locking tab so that no glue is needed. Tight fit. Increased windows for clearer view of pinout and voltage.
- Pobrania
- 182
- Polubienia
- 27
- Ocena
- 5
P
PrintablesChado
Lolin CH340 Chip NodeMCU Enclosure
Made this enclosure for quick prototyping for CH340 Chip NodeMCUs. It has kinda snap to fit function but do not rely on that :) Hope it does help. Also attached step file so feel free to modify. Material eSun PLA+ Black Hotend Temp 215…
- Pobrania
- 128
- Polubienia
- 14
- Ocena
- 5
P
PrintablesJPS Designs
CR0NCH3R - Chewing Robot
Traditional nutcrackers are so old-fashioned, now you can use the CR0NCH3R instead! CR0NCH3R is a little dude that chews as aggressively as you can press down on its lever or antenna. Made of many parts, it is easy to print and satisfying…
- Pobrania
- 127
- Polubienia
- 72
- Ocena
- 5
P
PrintablesMaxim Shchetynin
Holder for Gillette MACH3
Holder for Gillette MACH3.
- Pobrania
- 116
- Polubienia
- 18
- Ocena
- 5
P
Printablesjszewczyk
- Pobrania
- 113
- Polubienia
- 6
- Ocena
- 0
P
PrintablesxA59rhR8FF
ESP32-CAM-CH340 Case for Prusa Axis Mount
Case and cover to fit ESP-32-CAM-CH340 a.k.a ESP-32-CAM Integrated. Remixed from "Case with kodak thread for ESP32CAM + CH340" to suit "Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2". Category: Electronics
- Pobrania
- 111
- Polubienia
- 11
- Ocena
- 0
P
PrintablesArnoud Whizzbizz
Simple Mach3 Razor Cover
Most of the designs I could find here are way over-designed and bulky, so I designed this super simple cover for my Gillette Mach3 razor. Small lugs inside prevent it from sliding off. I vectorized an orthogonal photo so it fits snugly…
- Pobrania
- 108
- Polubienia
- 4
- Ocena
- 5
P
PrintablesStarwhooper
CH340 USB ESP01 programmer with switch
Adapter: https://de.aliexpress.com/item/32971337222.html Category: Electronics
- Pobrania
- 102
- Polubienia
- 10
- Ocena
- 0
P
PrintablesSvenMb
CH340 housing
This is a housing for a specific ch340 usb-serial converter. It is made for solfer connect a cable, but jumper wires still fit in. V1 - full closed this one needs to bend or replace the jumper pins (see pictures) V2 - jumper accessible…
- Pobrania
- 102
- Polubienia
- 16
- Ocena
- 0
P
PrintablesLiron
NodeMCU v3 CH340 - Cover
A case/cover/shell for NodeMCU (ESP-12E) For v3 CH340
- Pobrania
- 91
- Polubienia
- 0
- Ocena
- 0
P
PrintablesFix Daily
CH341A Flash BIOS USB programmer Case
Made for this product: https://s.click.aliexpress.com/e/_c3GTTzlN This custom 3D-printed case is designed specifically for the CH341A USB BIOS Flash Programmer, providing protection while maintaining full access to all essential…
- Pobrania
- 86
- Polubienia
- 13
- Ocena
- 4,5
P
PrintablesDaniele
Hope Tech3 Sram AXS POD clamp
Clamp specifically designed for seamless integration with the SRAM AXS pod controller and the HOPE Tech3 lever. This clamp needs to be printed using carbon filament, ensuring superior torsional stiffness essential for maintaining…
- Pobrania
- 83
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGuillaume
Case with kodak thread for ESP32CAM + CH340
the ESP32CAM is very popular, but I found a version with the CH340 and micro usb port included, so with this version no need to battery shield. this PCB is a little bit longer than the stadard one, so I had to create a new design to match…
- Pobrania
- 82
- Polubienia
- 5
- Ocena
- 5
P
PrintablesTronnic
ESP Home IR-Receiver (ESP32 CH340 KY-022 IR Receiver)
Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…
- Pobrania
- 66
- Polubienia
- 8
- Ocena
- 5
P
PrintablesNET
Case for USB-to-TTL Programmer RS232 (CH340G)
This 3D-printable case is designed for a RS232 CH340G USB-to-TTL programmer . It protects the electronics, keeps the wires organized, and makes the device easier to handle during programming or debugging. Perfect for DIY electronics…
- Pobrania
- 66
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKermit
Mach3 usb din rail mount
Din rail mount for Mach3 usb to 35mm rail.
- Pobrania
- 62
- Polubienia
- 0
- Ocena
- 0
P
PrintablesNiftyStudioMX
Gilette Mach3 Razor Holder
This is a remix from @AlineBorges_1372677 with an upgraded hook gap
- Pobrania
- 60
- Polubienia
- 4
- Ocena
- 0
P
Printablesblue_radio
Single-Stud Mount for EGO 320W Charger (CH3200)
Mount bracket for the EGO Power 320W battery charger (model CH3200) which allows the charger to be mounted on a single stud instead of requiring something at least 4" wide. I tried to make this a quick print while still making it sturdy,…
- Pobrania
- 57
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKrux
Mach3 controller - BSMCE04-PP
CNC motherbord BSMCE04-PP box Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: Plastika Trček PETG any Category: 3D Printing
- Pobrania
- 53
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPaul M
DIY Laser Darts Oche (4€) for GroMech3D Autodarts Setup
This is a DIY laser oche for the Autodarts setup by GroMech3D , using a €4 line laser module. It’s not as bright as the Winmau Oche, but it’s definitely enough for a home setup. Assembly & Adjustment: The initial calibration requires a…
- Pobrania
- 52
- Polubienia
- 9
- Ocena
- 0
P
Printablesabasson
ESP32-Dev CH340-C Enclosure for WLED
This enclosure is purpose-built for the ESP32-Dev CH340-C development board , offering a neat and protective housing for projects powered by WLED . Whether you're controlling addressable LEDs for ambient lighting or festive displays, this…
- Pobrania
- 49
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMarte
Samsung Watch3 Parametric stand
//italian //English //Italian In rete si trovano molti supporti di ricarica per orologi ma sono quasi tutti verticali. Il design di Kristjan ha invece il pregio di essere orizzontale con tutti i vantaggi che comporta: è facilmente…
- Pobrania
- 48
- Polubienia
- 6
- Ocena
- 5
P
Printablesprint.tech3d
Keychain Keytag print.tech3d 3d printer
It is a keychain of the print.tech3d logo
- Pobrania
- 48
- Polubienia
- 10
- Ocena
- 0
P
Printablesbogdankecman
box for ch340 gold usb2uart board
box for cheep ch340 prc usb2uart adapter CH340G RS232 Upgrade to USB TTL Auto Converter Adapter STC Brush Module Golden or any of the other "golden" adapters: ebay search: CH340G Module Golden no clips are designed to keep it as small as…
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBarbadosUnicorn
CH340E case
Quite simple yet relatively nice looking slide-in case for CH340E USB to TTL converter. Case sized at about 29*24*12 mm, designed with 0.2 mm tolerance in mind. CH340E PCB is 16*18 mm. Recommended to print in transparent or…
- Pobrania
- 40
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBruster
runout-batch3-part2
If you sensor has a pin/axel on the side then just use this part 2 instead of the original - you'll need the other parts from the original
- Pobrania
- 34
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCPS_Systems
CH340C ESP01 Two Socket USB Programmer Case with Cap
CH340C ESP01 Two Socket USB Programmer Case with Caps. Resized the case to accommodate a modified lever from ESP32-WROOM-32 (USB-C) Box with Lid model for the reset button. Added thickness and three versions of an optional protective cap…
- Pobrania
- 33
- Polubienia
- 7
- Ocena
- 0
P
PrintablesUPLYNXED
Gilette Venus & Mach3 Holder (remix)
Adjusted this model in the slicer to be compatible with Mach 3 razors from Gilette. The angle of the original model was a bit too tight which meant that it wouldn't fit anything other than the Venus razors. Mach3 razors would angle too…
- Pobrania
- 31
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOldManEngineering
Reach3D prusa inspired hot end with cooling fan
This hot end configuration was inspired by a prusa direct drive modification project with the Reach 3D Collaboration community. These parts were modeled from scratch using Fusion 360 and have been tested. As of right now there are only…
- Pobrania
- 28
- Polubienia
- 2
- Ocena
- 0
P
Printablesszutsgy
Dual Gillette Mach3 Razor stand
15mm, 16mm, 17mm inner diameter was made. You can choose what you want.
- Pobrania
- 25
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFalco
Gillette-Mach3 holder.
Filament : GST 3D. Pla+ White. / Petg Devil Design. Mint. Support : None.
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
PrintablesZafC
Tighter K25 Constraint Lynx Catch3 and Plunger
A Lynx 2.1 catch3 and plunger spacer tweaked to constrain K25 and similar springs like SF25 and OOD 140mm tuning springs. Dan wanted to avoid customer support for people who receive/print this type of catch3 and get confused trying to fit…
- Pobrania
- 24
- Polubienia
- 11
- Ocena
- 0
P
PrintablesBlitz City DIY
QT Py CH32V203 eInk / ePaper Daily Calendar Stand
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
Printablestechlover.de
Rain Cover for TTLock CF3 / CH3 / HF3 / H3
Rain cover for some TTLock Door Access Controls: - TTLock CF3 - TTLock CH3 - TTLock HF3 - TTLock H3 Printed in PETG with 20% infill.
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
Printableskumpakri
Bosh Vacuum BCH3P2301 adapter to Ruhhy vacuum bags
This is an adapter you can screw on the Ruhhy vacuum bag and clip the Bosh stick vacuum (the handheld part) to it to suck the air out of the bag. I printed with PLA and it works fine, but you need to be extra careful when removing…
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
Printablesthemactep
CH341A programmer protective case
A protective micro case for CH341A programmer to prevent bending of the USB-A plug connector. Also works perfectly in a tandem with a SOIC8 adapter soldered to the bottom of the programmer. Featured in this video:
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesStonemull
Case for CH340E USB-C USB-serial
My first design made for resin printing, the 1.5mm diameter pins will be a problem on a FDM printer. This was an experiment in designing for resin printing, learnt a lot. Hence the mssing side pieces and holes to allow drainage. I printed…
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesJur
Chromalux Neopixel Lamp Cover for Nodemcu V3 CH340
Chromalux Neopixel Lamp Cover for Nodemcu V3 CH340 ESP8266. Remake of the Cover to fit the Nodemcu V3 CH340 ESP8266. Fit for m3 en hole to still acces the reset button. Also abit tighter fit then normal. Print Settings Printer: HyperCube…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRegis
Trimmer Head Disassembly Key - Brush Cutter HOMELITE BCH32-C
I didn’t have a key to disassemble my cutting head from my brush scraper, so I modeled one.
- Pobrania
- 16
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRoland
SKATCH3D Coffee2Go cup
SKATCH3Dt coffee2go cup! The perfect opportunity to show off your printing skills to your colleagues at work, or to make a cool and useful present for family & friends! Material : The filament needs to be food safe, chemically tough and…
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
PrintablesZafC
PTFE guided Lynx Catch3 + TPU/36mm-PT versions
PTFE lined Lynx Catch3s with TPU and kury 36mm PT versions. Should reduce pump wobble in kury PT Lynxes without breaking quick spring swaps.
- Pobrania
- 14
- Polubienia
- 6
- Ocena
- 0
P
PrintablesMupshot
RDQ Mach3 30x30
needed to replace my VTX with one that had no mounting holes. viola, now I got one. taller version has a deeper cutout for the antennae and an additional mm depth to house the VTX
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
PrintablesRegis
Accelerator trigger - Brush Cutter HOMELITE BCH32-C
v3 : Reinforcement housing screen
- Pobrania
- 14
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRegis
Accelerator trigger - V2 - Brush Cutter HOMELITE BCH32-C
I tried to print the piece by orienting it differently, but it was causing problems in other places. I also tried to strengthen the most fragile parts, but as they were less flexible they became even more brittle:(. Which is completely…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMupshot
Diatone Roma L4 Mach3 mount
basic Mach3 VTX holder that fits in place of the stock VTX tray. V2 is a rough draft of the same tray with an extension added to mount an SMA pigtail. Its not pretty, but it worksusing two 6mm M2 screws. Future mixes might try to…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesclusterfuggles
Parametric Gillette Mach3 Turbo Razor Holder
This simple parametric razor holder has the following adjustable parameters: Printed out of Hatchbox Blue Gray PETG at 0.2mm layer height, 15% infill, 3 perimeters. With the default settings it uses 11.6g of filament. The default inside…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLoveX
CH340N USB-C Mount/Holder
Mount for the CH340N USB-C module, ideal for securely fastening it inside a case. The header pins need to be removed, and the connections must be soldered using a wire. Required: 2x M3 min. 5mm long (to screw the top and bottom parts…
- Pobrania
- 11
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFix Daily
Programmer SOP8 Adapter Socket Encloser for EZP2013 and CH341A (200mil and 150mil versions)
Made for this model: https://s.click.aliexpress.com/e/_c438pkd1 (150mil and 200mil-209mil Version Only! Each has it's enclosure) This 3D-printed custom enclosure provides a compact, protective and practical housing while keeping all the…
- Pobrania
- 10
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSean Welgemoed
Defy DCH300 Fume Extractor Grate Clip
The Defy DCH 300 series fume hoods/extractor come with little aluminium tabs that are exactly 0.5mm thick, as a result they break off when you look at them funny. I designed little tabs that can be press-fit and printed in place for the…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBob
Mech3
PLEASE DO NOT MAKE PRINT PROFILES OR REMIXES! This is a mech model that moves.
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLambtor
gillette labs mach3 dual razor stand
Basic stand for gillette labs and mach 3 razors. Example is printed in TPU, but this should work with PLA if desired. Included freecad file in case remixes are attempted.
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesJeffrey
Improved Reach3D E3Dv6 Mount.
An improved E3Dv6 Mount including fan, and Inductive sensor holder for the Reach 3D printer. It will take a standard 40mm fan, and the the E3D dual fan and bed cooler part (printed in red) from here http://www.thingiverse.com/thing:839620…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablescwohltat
Mini Keychain Game Console - Case for CH32V003-game-console
This is a housing for the mini game console of wagiminator . It features the inexpensive ch32v003 processor. Someone on OSHWHub.com shrinked the design further to a keychain size. The case is for that board from OSHWHub.com, not the…
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
Printableswilliam everett
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBoda
CH32V003 Matchbox Clock
Clock in matchbox size with touch control (The CH32V003 is a new chip, if you prefer the Arduino Mini version, see https://www.thingiverse.com/thing:6302260 ) Binary clock, it has 16 pieces WS2812B arranged in a 4x4 matrix display showing…
- Pobrania
- 7
- Polubienia
- 1
- Ocena
- 0
P
PrintablesTyler Durden
Case for WeAct CH343P
Case for WeAct CH343P Category: Electronics
- Pobrania
- 7
- Polubienia
- 0
- Ocena
- 0
P
Printablesjeepers01
CH347 USB Programmer Caddy / Tray
CH347 USB Programmer Caddy / Tray This caddy has been designed to protect the CH347 on the workbench Printed on 0.2mm PLA, no need for supports. Small strips of double side tape secure the device. I've included a Step file as well as the…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
PrintablesCKopf
Hutschienenhalterung Relaisplatine RelGleich3.0
Hutschienenhalterung für eine Relaisplatine "RelGleich3.0" von https://www.nebenuhrsteuerung.de/Relais3.htm Es werden noch benötigt: 6x Mutter M3 2x Schraube M3x14 4x Schraube M3x10
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printablesjeepers01
CH341A USB Programmer Caddy / Tray
CH341A USB Programmer Caddy / Tray This caddy has been designed to protect the CH341A on the workbench Printed on 0.2mm PLA, no need for supports. Small strips of double side tape secure the device. Also included is a version with the…
- Pobrania
- 4
- Polubienia
- 0
- Ocena
- 0
P
Printables
QT Py CH32V203 eInk / ePaper Daily Calendar Stand
https://learn.adafruit.com/ch32v203-eink-epaper-calendar-and-clock You will want to add supports for the display cutout.
P
Printables
Tighter K25 Constraint Lynx Catch3 and Plunger
A Lynx 2.1 catch3 and plunger spacer tweaked to constrain K25 and similar springs like SF25 and OOD 140mm tuning springs. Dan wanted to avoid customer support for people who receive/print this type of catch3 and get confused trying to fit…
P
Printables
Rain Cover for TTLock CF3 / CH3 / HF3 / H3
Rain cover for some TTLock Door Access Controls: - TTLock CF3 - TTLock CH3 - TTLock HF3 - TTLock H3 Printed in PETG with 20% infill.
P
Printables
SKATCH3D Coffee2Go cup
SKATCH3Dt coffee2go cup! The perfect opportunity to show off your printing skills to your colleagues at work, or to make a cool and useful present for family & friends! Material : The filament needs to be food safe, chemically tough and…
P
Printables
Gilette Mach3 Razor Holder
This is a remix from @AlineBorges_1372677 with an upgraded hook gap
P
PrintablesLoveX
Arduino Case for: (Arduino Leonardo, USB Host Shield, CH340N)
Introducing my custom-designed case for the kit, which includes an Arduino Leonardo, USB Host Shield, and CH340N USB-C. Engineered for commercial use, every component fits perfectly, making soldering effortless and ensuring a flawless,…
- Polubienia
- 1
- Ocena
- 0