Liczymy pasujące modele…
Stackable holder for markers. Print one layer for every 36 markers, tabs will insert from one layer to the next. Print one lid for the top layer. Designed by request, the outer shells are all solid, but the inner walls use a hex pattern…
Wydruk około 2,68 €–3,27 € nettoWstępna wycena jednego wariantu
I had a request to make a dual-sided “coin” of the Alcoholics Anonymous for a friend, and because I had two colors that fit very closely to the colors of some of their material, I decided to make it dual color. Printing instructions Print…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
A holder for Alcohol Prep Pads/Alcohol wipes.
Wydruk około 2,58 €–3,16 € nettoWstępna wycena jednego wariantu
I created this model to store the ~250 alcohol markers my girlfriend has. She wanted to store them in one of the drawers of her IKEA Alex cabinet. Due to the big volume of markers I decided to take on the challenge and create this…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
This Mini Alcohol Bottle Opener is a handy tool designed for effortlessly opening small liquor bottles (40 - 50 ml) with cap diameters between 17.5 - 20 mm . ✅ Easy to Use: Provides better grip and leverage for opening tight caps ✅…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
I use the larger bottles of isopropyl to clean my build sheet. Seems fine printed in PLA, 20% infill. I've included two presliced profiles, one for Prusament PETG, and the other for generic PLA. These use 2.6 Alpha 3 Organic supports…
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
Small but effective alcohol dispenser. On image is text but this model is without text. I would be very happy for photo
Wydruk około 9,27 €–11,33 € nettoWstępna wycena jednego wariantu
I needed a holder for the Alcohol Prep Pads that I've been getting from Walgreens that come as a pair of pads. This is designed to sit on a counter/desk/flat surface and hold most of a 400 pack of alcohol pads. My MK4S isn't tall enough…
Wydruk około 7,87 €–9,62 € nettoWstępna wycena jednego wariantu
Modification of @danny6869's Alcohol Swab Holder. Slightly wider and three times the length for holding lots of swabs.
Wydruk około 5,64 €–6,89 € nettoWstępna wycena jednego wariantu
Simple alcohol pad holder made in TinkerCAD. Inner dimensions: Side 1: 52mm x 65mm Side 2: 61mm x 65mm Outer dimensions: 142mm x 70mm
Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu
These two models are printed at: .2 mm 10% infill No brim No supports The 2x1 version I used magnets to make it more stable and not just tip off. NEEDS magnets, otherwise it was annoying. 2x2 Version does not need magnets per say. Here is…
Wydruk około 2,29 €–2,79 € nettoWstępna wycena jednego wariantu
The part that push the nozzle to dispense alcohol
Wydruk około 1,12 €–1,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model holds the basic isopropyl alcohol bottle you get from stores like Walmart and attaches to the Honeycomb Storage Wall. I printed it with the Ender 3 v2 and used Cura as the slicer. With the honeycomb/hex container, it printed…
This stylized funnel provides good control of the flowing liquid. I was inspired by similar funnel in Germany. This model is a remix. I recommend supports only for antlers and bottom of the mouth, the inside of the model does not need any…
My daughter came to me asking for a holder for her Alcohol Markers, The original package came with a cardboard egg crate style holder and I knew I could do better. Its not much but it gets the job done. Printed on a Prusa Mini + 0.4mm…
This 3D-printed stand is the perfect solution for organizing up to 80 alcohol markers. The design maximizes stability while using a minimal amount of filament, making it both efficient and eco-friendly. The compact and durable structure…
Simple marker container. One holds 20 pieces. Can be combined freely.
I wanted a shelf built specifically to fit my bottle of isopropyl alcohol for the Honeycomb Storage Wall. Both of the bottles I had in my house were ~ 80mm square, so I made this as a 84mm square to give an “easy fit” (with some sexy…
Add convince store alcohol bottles to gridfinity. It fits standard sized 65x65 mm square bottles. This has a gridfinity footprint of 2x2 units. The example was printed in 3DXTech orange PLA at 0.20 mm.
I've got the knock-off Copic's which are 16mm x 16mm, tapering to 14mm x 14mm with a 12mm x 12mm base. They've been sat in a cutlery caddy for years so I thought it's high time I modelled a proper holder for them. Included models are an…
A local AA group asked for an Alcoholics Anonymous sign, i made the logo and a "We are not a Glum Lot" for all my friends of Bill W. Print instructions Category: Signs & Logos
Hold paint or nail polish or anything else that is about this same size. Print instructions 2 different sizes.
I just needed a way of storing my Isopropyl cleaning wipes. I looked around on Thingiverse did not find anything that matched what I wanted, so I quickly made some measurements and created this storage box / Dispenser. The Swabs Measure…
Update1: I have added the enclosure v1.2 and drawers v1.3 with some slight fitment adjustment and a couple feature updates. In addition, I have added a version of the enclosure with hexagonal cutouts. This two tier storage drawer includes…
Battle Shots alcoholic version of the battle ships game. draw the game surface like for a classic battle ship game, fill up shots, place it in the ships and the game can begin. Print : 4x ship 2 2x ship 3 2x ship 4 2x ship 5 (Ship 4…
I made this to hold the alcohol I use to clean my build plate, Printed with supports for the hooks. Printed with overture petg on an ender 3 v2.
Hope You Like My Selection Of Alcoholic Brand Coasters, Let Me Know If There Is More You Want Done… Some Will Require ‘Print Thin Walls’ On Due To Intricate Details. Please Share Yours Makes And Remixes Enjoy Printing! If You Message Me…
for 50 (~55)mm disposable alcohol pads. Print instructions There are small tabs at the edges of the overhang where the pads are pulled out. you will need to clean this area up with a knife. pads are designed to come out and down at a 15…
Credits for the main design to Vallejo paint rack for 7ml bottles This remix is reducing the size to fit 24 bottles (21mm) and to have a small side tray to hold things. This rack will hold 24 mini bottles that have a 21mm diameter. My…
This remixes a 32oz 80x80mm IPA holder for a pegboard (which is a remix of a smaller holder) and adds IKEA Skadis mounting pegs from the Fluke 87 V multi-meter holder. The mounting pegs are a bit tight. I clipped the corners to help them…
Tryska pro raketu z PET lahve na lihové palivo
I made a double sided AA ( Alcoholics anonymous ) sobriety chip. It should be printed at 100% infill with 3 walls. No supports are required. Standard 40mm / 3mm thick chip.
Since my sister had bought some twinmarkers without a box and didn't know how to store them, I redesigned the original box 1:1. The boxes are compatible with each other. To be able to print the boxes faster, I designed the knobs as…
Inner dimensions: L= 54mm, W= 101mm, H= 60mm Used with two blank inserts to attach to Honeycomb wall (https://www.printables.com/model/152592-honeycomb-storage-wall/files#preview:file-hcc0c) print with: tree support, only touching build…
Simple lotus shape with recessed slots for 34mm coins given as sobriety milestones at many AA program meetings. No need for supports.
I created this storage box in Fusion 360 to store a stack of alcohol prep pads on the HSW. The insert portion of the box was created using a modified version of the “insert-empty.stl” from…
Gridifnity box for holding your Alcohol Prep Pads
I recomand scale 77% x 77% x 70% 17.3.2022 - Release version 1.0 29.3.2022 - Updated version - bigger pipe and better stop
Wanted to hang my isopropyl alcohol on my WallControl Peg/Slot board. Made this remix to do that. Note: the part named “2x3 Spacer blank flush” is optional. I thought I would need it but it's not really necessary. You can still put it all…
This alcohol-marker holder stores 50 markers at a 45° angle for easy viewing and quick access while keeping inks near-horizontal. Each slot fits markers up to 16.5 mm² —ideal for standard alcohol markers, including round barrels and most…
I made this bottle cap so I could squirt a small stream of alcohol on the build plate to clean it—no need to use a spray bottle. I think there will be less evaporation through this small hole than what is lost when spraying it in a mist.
A pegboard holder for square bottles. I use it for isopropyl alcohol, for cleaning the print bed. It's designed for bottles with sides of 63 mm (2.5 inches) and standard US pegboards of 1 inch spacing. Print instructions Resolution: 0.2…
A tray insert that fits in the original bag that the pens were supplied in. This is for a set of 120 pens. I printed this in PLA.
I designed a box for the alcohol pads that I use to clean my print bed. Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Creality Printer: CR-10 Rafts: No Supports: No Resolution: 0.2 Infill: 20%
Easy to print Isopropyl Alcohol Bottle holder for the Multiboard system. Holds a 32 FL OZ Bottle using Multiconnect system by @DavidD
A threaded screw-on spout for the 5-gallon isopropanol drum from McMaster-Carr. Several spout designs available. Still in testing.
The alcohol dispenser is based on the project Alex Gyver. The model is completely designed by me. A list of used spare parts in the process of creation list of spare parts: 28byj-48 TMC2208 OLED display TTP223 single touch button (Replace…
Fits the 32oz bottle (78mm x78mm base) plus a little tray / shelf for the swabs I use. Printed with no flaws - about 7hrs print time with the settings I used. Hope you Enjoy! 0.20mm from a 0.4 nozzle 15% gyroid infill Supports on the back…
This is a 1x3 bin to store alcohol prep pads with a sloped floor to to make access to each packet easier. This is a remix of the original bins by Akio and Zack Freedman that you can find here: https://bit.ly/ZFGridfinityDividerBins
I have a bag from the brand Ohuhu with 320 alcohol markers. I noticed that these markers are packed rather messily in the bag and you don’t get them in numerical order. I therefore made a grid pattern that fits in my bag. It fits…
Another Funny Sign - "in Alcohols defence, I've done some Pretty Dumb stuff while Sober too", multi colour wall art print, printed in ZIRO Black and Overture Matte White PLA. For more funny signs see my (growing) collection of them here -…
The CW1 tank is quite big and I never print such hight stuff. I design this arm in order to lower the build plate and save 1L IPA. Printed in PETG, tested for 6 months, no issue. Use the arrow on nut top in order to have a good lock of…
A 2x2 Gridfinity-based storage for small alcohol prep pads. This is based on the Gridfinity organization system by Zack Freedman.
Added slots for microSD/vernier caliper/ruler, wider tray fits alcohol pads. Added radius extraction ramp in front tray, and phone holder notches. Added phone holder notches on front of tray edge. Optimized walls (2mm) - prints for me in…
Dispenser to use less material and make it easier to take out pads. It works for pads that are about 50x50mm. If you want to support me, please download 📥 and like ❤ my prints 🖨 Category: Organization
Now I keep all frequently used printer stuff handy… I go through a lot of Alcohol :-)
Printed on a Tevo Tarantula 0.4mm Nozzle, 0.2mm Layer height
I have created two versions of the organizer. The first version can be conveniently accessed from the top as it sits on my table. The second version features a bottom slit, allowing one to place the organizer above them if desired (the…
Der Shoty Hybrit Alkohol Dispenser ist ein Tool, das es ihnen vereinfachen, mehrere Shots zugleich einzugießen. Er ist sowohl stationär auf dem Tisch als auch mobil mit dem praktischen Griff, der optional befestigt werden kann. Das macht…
This is a Alcohol Anonymous Juice Wrld Coin That was features in his Music Video "Cigarettes"
This is an Alcohol and makeup cleaning pads holder organizer... Print instructions This is an Alcohol and Makeup cleaning pads organizer for cleaning the build surface on the 3D Printer. The makeup cleaning pads works good and you can…
The 3D-printed "Alcohol Pen Storage Board for 100 Pens" is a practical solution for storing and organizing pens with square caps. It has been specifically designed to securely and neatly hold 100 pens. Here are some features and details:…
simply print the bot mounts to secure the part
Holds a quart Isopropyl Alcohol container, 82mm x 82mm, to a 1" spaced ¼" pegboard. Remix of @MakeAnything Devin Montes's Isopropyl Alcohol Pegboard Mount (found on MyMiniFactory and modified 12/17/22) to save 5g of filament and look…
Each of this unit can store popular round shaped marker pens of diameter 15-16 mm such as Copic or Ohuhu. The Markers used in illustration are Ohuhu Honolulu marker pens. Very simple in design, and super sturdy tested by a toddler…
This dispenser fits the Halsted Health 99.9% isopropyl alcohol wipes that are used to clean the 3D print bed print surface. Here is a link to the exact wipes that fit perfectly. https://amzn.to/3AiEgaW In the model file, I have removed…
I use the Solimo/AmazonBasics Isopropyl Alcohol Spray ( 1 bottle , multipack ) and wanted a clean way of storing the spray bottle and the cloths I use to clean the bed. I clean the bed before every print, quick spray and wipe down while…
Marker Storage Organizer Layout: 10 × 8 slots (total: 80) Slot Dimensions (L × W × H): 14.5 × 14.5 × 20 mm Ideal for standard-size markers Wall Thickness: 1.3 mm Printed using a 0.6 mm nozzle with two perimeters for added strength and…
This fits 18 5 mL bottles (22 mm in diameter). Print Settings Holder: No supports required. I printed with 0.2 mm layer height and 5% infill. Pegs: .12mm layer height, .44mm layer width, and 10 walls (so they print solid). No supports…
Tray measures 28.8cm x 4.2cm(not including pegs) x 1.6cm. Holes are a smidge over 21mm in diameter. First foray into fusion 360 so it's not perfect, but works.
Simple storage system for alcohol ink. Customizable using openscad, code fully commented. Number of bottles in X and Y direction can be chosen as can size and height. Uploaded version are standard bottles sold on amazon/ebay. Do a simple…
The filament wasn't dry enough but post clean up did it OK enough. Thanks to the original creators of this and it was a bit of a journey to learn how to edit it in tinkercad as I have 0 experience. Bit of an obvious joint on the starboard…
It's a tight fit, scale it up if you want more wiggle room.
Remix of an existing dispenser but I had to enlarge it a bit back-to-front so it can fit Curad alcohol prep pads ( https://www.amazon.com/dp/B00KOSP454 ) Had some issues with the overhang on the opening so consider slowing it down a bit…
A clean build plate is a happy build plate and my favorite way to clean my PEO/PEI, etc. build plates is lint free cotton rounds (found in the makeup section of any mega/drug store, don't cheap out - get the “lint free” ones, they are…
Was tired of misplacing my bottle of Isopropyl Alcohol near the printing area resulting in always needing to look for it! So here is a holder that I made for the 99% Isopropyl Alcohol bottle that you can get from Superstore (Loblaws).…
i'm using medical alcoholic pads for cleaning my print bed. ad I decided to create a HSW accessory to store them near the printer.
This is a simple station that fits the Equate Brand Isopropyl Alcohol and Cotton Rounds found at Walmart. This is the perfect combination for bed cleaning between prints. Print instructions I printed this with Prusament PETG in Prusa…
This is a tower to hold a pump bottle for IPA and cotton rounds. It can hold a bottle roughly 60mm round and 120mm tall. I use them to clean my build plate. Print instructions There is a separate top and bottom to print then super glue…
This is intended to hold and dispense alcohol wipes or eyeglass cleaner wipes in the 2-up packages. This should also nest or stack with the floss dispenser/organizer or itself. Let me know how it works
This just mounts my build plate cleaning materials on the wall right next to my 3d printer. Hope you enjoy it! If I remember correctly this should use m3 screws. Get back with me in the comments if you find otherwise. Category: Organization
This model matches the Skadis bottle holder I have designed. Inter-diameter is 60mm and holds pads well. Printed in PLA using tree supports. Model does fit tight, but fits. Enjoy!
This is my first ever design. It fits alcohol wipes commonly found in first aid kits. I added an area in the back to glue in 2 3x20mm round magnets so it can easily mount on enclosure or magnetic surface of your choice. printed in PLA no…
An alcohol Pad or wipe dispenser that uses less material makes it easier to take out pads. It works for pads that are about 50x50mm. Features a Gridfinity-compatible base with a 21 mm grid spacing, allowing the placement of the grid in…
I use a MG Chemicals Isopropyl Alcohol Spray Bottle to clean my build plate between builds. It was just sitting on top of my enclosure so I made a mountable bottle holder for it. In case it helps others, the diameter of the bottle is 63.1…
This is a variation of another alcohol swab holder/dispenser. The alcohol swabs I buy from the local dollar store are 42mm in width/height, so I shrunk the original model down to fit these. Hopefully, it's useful for someone else.…
For me, these little medical alcohol wipes work well for cleaning my textured print bed. This part stores them nicely.
I created The Beer-Coholic trophy mainly for the Trophy contest but if anyone would like and would find someone suitable for this award be my guest and reward them with original trophy for their character. The STL file is bit oversized so…
This is an alcohol prep pad dispenser for the Ikea Skadis. It holds around 100 alcohol pads each measuring 15mm x 15mm (2"x2"). This was remixed from the Tea Dispenser below, thanks for the design! 20% infill Buildplate Supports On
I designed this to hold an alcohol bottle with a diameter of 57mm securely to the Prusa Enclosure. It is secure enough to where I don't remove the bottle if I move the enclosure. I made sure it is mounted low enough to be compatible with…
A Skadis mount to hold CA Glue/Gluestick/Isopropyl and some extras. Uses t-nut mod from 6d6178 (https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards).
This adapter allows you to connect a spray head to a 250 ml alcohol bottle. The idea is to maximize the use of alcohol to disinfect surfaces or objects. Print instructions There are two models for bottles with different diameters. The…
I bought a set of 12 alcohol inks to play around with dyeing some resin prints, and the bottles are so small they won't stand up very well. I needed a way to organize them all and keep them from getting knocked around my work table, so I…
4x4 Gridfinity bin that holds a <67mm square bottle of isopropyl and a hex scraper with nice stepped holes.
This is a holder for a full box of Curad Alcohol Prep Pads. It holds a full box of pads. The holder is designed to mount onto an Ultibots D300VS, but could be mounted on a number of other printers. The bottom is vented so bits of plastic…
Gridfinity mount for Menda Isoprophol Alcohol pump bottle
