Liczymy pasujące modele…
*6/11 Update: Still working on some new bell designs to get a better sound. Will post the files and video soon! Updated the mouthpiece files. Note: This is an ongoing project and I will be making modifications to the design as I'm able to…
Designed a simple pipe coupler that uses 6x3mm magnets it has 8 magnet holes, allowing to place magnets however you like, the magnet hole has enough room to fit the head of an M3 bolt, so you can also screw couplers together or screw them…
I wanted a mobile stand, without any fancy print-time consuming details, that could be printed without any support. Should fit most phones, even with mobile cover installed. (13mm) 20.11.25 Raised the model a bit, to make more room for…
A folding rack to hold 30 25mm bottles of miniature paint. Needs 16 x 3/8 long 6-32 screws to attach rails to rack pieces, and 4 x 3/4 long 6-32 screws to attach legs. Leave all screws a little loose so that the pivots move freely. Due to…
A form over function hinge designed for my Ender 3 enclosure. Due to my specific case the hinge is 47mm in depth from the door-mount, which works well when using a 3mm plexiglass door with an IKEA Lack enclosure. If you want to edit the…
REMEMBER: do not leave torque wrench in preload state. Always unscrew cap to 0 position or below when not in use. It is usual practice using torque wrenches. UPDATE 2020-04-19 added more constant and variable thicknes springs. As most of…
This is a very overcomplicated helicopter to protect an egg from cracking upon being dropped from a high height. It requires a few extra parts. PARTS 6 1ft Skewers - About 3 mm or so, you can drill out the holes more if needed. 2 Bearings…
In your life, do people often ask you why you need to make things so difficult? If so, this tool is for you. This is a heat-set insert installation tool designed for the Hakko FX-951 soldering iron. There are many such tools available,…
This is a somewhat overcomplicated, but nice, iambic key for portable radio operation. It has a magnetic base to attach to your radio's chassis, allowing for easier use in the field without needing a heavy base of its own. It uses a small…
Congratulations for finding the most unnecessary over complicated over engineered 8mm pet bottle cutter ever (probably). It might not help you cut pet bottles better or faster than other pet bottle cutters, it might even not work properly…
This project has consumed hours of my time, metre upon metre of filament, and had at least 5 redesigns, before ending up as this monstrosity. Now I know how Ford felt with the Edsel! Speaking of Ford, this is a Ford Fusion. But the UK…
These beads will protect you from attacks😋
Just decided to have some fun (in the spirit of Rube Goldberg) with a stamp dispenser for my desk. This dispenser is intended to be used with a roll of postage stamps; the width of the roll is approximately 25mm. A bonus for me in doing…
Print this thing upside down or use an ungodly ammount of supports. Will fit what i consider a standard sized tissue box, 140mm (cubed). Added fusion file for anyone who is also in the market to make an overly complicated box and want to…
Dimensions 215x215x170. Print without supports. Holds 100 kg (barely). And yea it is definitely overcomplicated.
Holder for 63x40mm sponge used for cleaning tips of soldering iron. For better stabily I recomed pour gypsum in and create silicone layer on bottom. print with brim, 3 walls, 5 top/bottom layers, PLA or PETG clean print mix gypsum really…
Parts list 1 - Attachment to Core one 2 - Flex gasket. Optional but recommended 3 - Filter end parts - print 2x 4 - Filter housing 5 - Filter internal frame BOM 1.5 dl of Activated carbon (approx.) 4x M3x6 screw 8x M4x6 Flathead (Philips)…
This is Piet Hein 's Soma cube puzzle. This model is far too complicated and the OpenSCAD code tries to do things it really shouldn't. If you want a better one to print, please use Soma Cube, take 2 . If you want the exact geometry of the…
A phone holder i deigned just for fun. Please note that this is a massive waste of filament and it is not very practical
This is an odd shaped over complicated soap dish that I designed to see if my cheapest and weirdest printer could handle it. (Sculpto Pro2 Polar coordinate) I think the weird round printer did a descent job with the massive overhangs on…
This is my over complicated / over engineered solution to prevent humidity from ruining my filament while it prints in my garage. The spool sits on the rollers inside the container and feeds out a tube on the bottom. The roller assembly…
No point, I'm sure there are many much simpler paper towel holders to be found :) Threads modified so they screw in easily without post processing.
This is an upgraded version of my "CTC A10S Amazing & Stupidly Overcomplicated Bed Leveling Knob Assembly". I designed the original part hastily out of necessity because the tiny flower shaped make shift knobs that came with my CTC A10S…
Levels of function (2*x^2+y^2+z^2-1)^3-(0.1*x^2+y^2)*z^3 You can inspect more here .
After mostly positive experiences with an MR105 bearing based filament guide on my MK3S and MK2.5 I had a few durability problems I wanted to solve. I decided to start with F6702 flanged bearing. Not a common choice but not hard to find.…
My CR-10 knock-off printer, listed as a CTC A10S, are sold with various levels of dysfunction, and built from a variety of defective and unbelievably bad parts. I do believe the one I purchased is the worst build quality of any out there.…
support de bobine inutilement compliqué et très chiant à monter, mais c pas grave je le trouve cool quand même :)
It uses 16 x 5.5mm ball bearings and printed bearing parts to achieve smooth rolling action. 2cm thick PVC pipes are used as the feet, cut them as long as needed or print something that fits. Bearings need decent but not perfect…
A box with lid. On one side, the lid is connected with the box by a hinge, on the other it hooks to the box upon closing. Both the lid hinge and the hook are connected with spring-like elements to the lid, which forces the lid to adhere…
Hardware - 8 * M3x12mm FHCS (same as the rest of the holder) Print as oriented I printed mine with 2 walls and 10% TPMS-D infill, settings may need to change depending on the hardness of the TPU used Submit feature requests here!
Are the pendulum holders you got with your lights pieces of crap? Do they cause the light to hang crooked? Did they drop your fancy and expensive decorative lightbulbs just after installation? Only me? Anyway, they function as the picture…
I wanted a phone stand that I could easily transport in a laptop bag. The side effect is that it is now slightly over complicated. There are 3 parts. The base, joint, and top. There are holes to insert filament to keep everything in…
I was bored, and had a random pile of change sitting around, so I decided to design a cool place to store them all. So what could have been a simple box or bowl turned into a screw-topped four digit combination locked piggy bank thing.…
Dimensions 215x215x170. Print without supports. Holds 100 kg (barely). And yea it is definitely overcomplicated.
https://www.patreon.com/posts/59259711
![Overcomplicated stackable box [wip]](https://media.printables.com/media/prints/e3e9f24c-39e9-4845-b75b-0b45e8a8437b/images/11540906_c417a930-cf52-4edd-a3aa-9a614fbc306f_7eea51d3-0d64-4569-826b-bdaf481b0b5c/1.jpg)
