Liczymy pasujące modele…
Update 10.02.2023: I remixed the rotor with the toroidal design :) Feel free to test ist out! https://www.printables.com/model/394700-toroidal-rotor-4-strong-flying-propeller In addition, there are now many other great remixed propellers…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Like this design? Check out the Pocket Copter! Fast to print and assemble. No screws or glue needed. Prints without Support Structures: https://www.printables.com/model/421807 Pull Copter Finger Ring Projectvideo:…
Wydruk około 1,00 €–1,22 € nettoWstępna wycena jednego wariantu
You can now purchase screw/mirror kits at Kissner Optik . Official Discord server here. New instruction manual is here! See “other files.” I recommend the Hill Mount, Marci Mount or EMT remix over the one featured here. Wooden ones still…
Wydruk około 1,57 €–1,92 € nettoWstępna wycena jednego wariantu
Remix of a remix :) The original part didn't last a week - the tab on the outer ring broke from fatigue. Here's a redesigned version with a stronger (and simpler) mount. Enjoy! Print instructions Use supports
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
This model includes almost all of the deployment steps of the James Webb Space Telescope including: Solar Panel Antenna Fore and Aft Sun Shield Pallets Left and Right Sun Shield Boom Extension Aft Momentum Flap Tower Deployment Secondary…
Wydruk około 0,05 €–0,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A modern approach to the wavy style plant pots with the use of parametric settings. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Wydruk około 3,72 €–4,55 € nettoWstępna wycena jednego wariantu
I've made a kit card model of the helicopter I really like. This model can be displayed everywhere and can be great gift. Printing instructions: Layer height: ≤ 0.15 mm Infill: 100% Material: PLA (PETG might work too, but I have not tried…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MEMS Gyroscope 100:1 scale model of a MEMS Gyroscope. https://en.wikipedia.org/wiki/Vibrating_structure_gyroscope For demonstration purposes only, but doubles as a nice fidget too :) Printing: Printed in PLA. Print without scaling for a…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
There are surely simpler adapters to be fair, but this one can fine-adjust the way the camera looks into the lenses, to get the best picture quality. NOTE: This is model was more a personal project, I just decided to share. The tolerances…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
Modern Telescopic Phone Amplifier: Stylish Sound Enhancement Product Description: Introducing the modern telescopic phone amplifier, a stylish solution for enhancing your phone’s audio experience. This innovative design features a…
Wydruk około 7,38 €–9,02 € nettoWstępna wycena jednego wariantu
I Remixed this for the Extruder as Mini. Press fit a 8mm x 6mm Magnet or I used two 8mm x 3mm Magnets. Enjoy and have FUN! 50 Pcs 8x3mm Neodymium Magnets https://a.co/d/ai8vfr1 The Provided G code uses a filament swap. I have provided the…
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This is a print-in-place telescoping holder for colored art pencils. To raise it, grab the handle, twist clockwise, pull up, then twist counterclockwise to lock in place. In the raised position, you can easily see all the pencils. To…
Wydruk około 10,39 €–12,69 € nettoWstępna wycena jednego wariantu
This prototype is 16mm wide and just over 20cm long with 6 segments total. It has an average overlap of 20% which ends up giving about 100cm expanded. ---------------------------------------------------------------------------- If you are…
Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu
First, This is all Tinkerheart's design… with a twist. This is also my first print in place. I combined Tinkerheart's holder with Tinkerheart's clip with a swivel so the stethoscope stays level with motion. The clip, as stated, is good…
Wydruk około 3,75 €–4,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Wydruk około 3,93 €–4,80 € nettoWstępna wycena jednego wariantu
This 3D model is a coffee cup holder that attaches to a stroller, making it a must-have for parents who enjoy a hot drink while on the go. The holder includes several parts that can be 3D printed and assembled with the help of some…
Wydruk około 8,44 €–10,32 € nettoWstępna wycena jednego wariantu
Llaveros del mundial de la Copa Mundial de la FIFA México/Estados Unidos/Canadá 2026 Creo que es un llavero que será muy comercial en los próximos meses, lo bueno que se puede combinar con una infinidad de colores. Son dos tipos de…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
Wall Art silhouette model of the UH-60 Black Hawk military helicopter. Adjustable size. I accept model suggestions.
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
Single-piece adapter for mounting a Sony E-Mount camera to a 1.25" tube. Thanks to this model/designer for the e-mount geometry. Designed for and tested with a Sony a6000 and Celestron NexStar 5SE, but should work with most E-Mount…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use to have a zip-lock bag of rolls of copper foil for doing stained glass. The rolls would stick together, pick up dirt, and get tangled up. When I pulled off foil to wrap around stained glass pieces, it would get twisted because the…
Wydruk około 17,57 €–21,48 € nettoWstępna wycena jednego wariantu
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,13 €–1,38 € nettoWstępna wycena jednego wariantu
I made small adjustments so that the structure. I recommend reducing the printing speed to 70% either from the machine or the program you are using to 20-30% to avoid errors. Remember to add supports to ensure a proper attachment.🧀🧀 I'm a…
Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu
Updates! Reorganized parts listing for clarity About After spending some time trying to use a telescope camera with the wonderful Hadley telescope by Maff , I decided I needed a focuser that didn't rotate. Rather than wait, I decided I'd…
Wydruk około 6,78 €–8,29 € nettoWstępna wycena jednego wariantu
This is a fully printed quadcopter frame, which can be flown acrobatically and has mounting points for a lot of different components. I designed it as a testing platform and made it as modular as possible. The arms went through multiple…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Prints with no supports, if yours is fused too hard to break loose, try the extra tolerance version. 4 rotors spin, arms do not pivot. Depending on your settings, you might have to POP them loose the first time. Also available: Original…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Inspired from a real maple seed that blew on my patio one evening. Exactly the same size as the original seed. I tried different versions of the wing thickness and the more layers it got, the less it would spin requiring more height to…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. To open the egg, grab both halves, wiggle & pull apart. The bottom half has a…
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Fits on a Prusa Mini, no supports needed, print 2 propellers and assemble as in the photo, at 90 degrees to each other and with the raised centre facing down. I used PETG for its flexability. Does not hover only slows the decent down. in…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a simple little gyroscopic keychain I designed in Fusion 360 following the Product Design Online tutorial as a guide. I took it a step further and set it up as a multi-color MMU print.
Wydruk około 1,01 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
EDIT 03/04/2023 Added f3d and STEP files so these can be remixed. __________________________________________________________________________ Designed a system of parts to create a means of mounting the Hadley to a tripod in a very sturdy…
Wydruk około 2,63 €–3,22 € nettoWstępna wycena jednego wariantu
This is an easy to print JWST model with mirrors and support structure as they appeared during assembly and testing prior to being covered with protective material for launch. My way of teaching myself to use reference images for 3D…
Wydruk około 8,34 €–10,20 € nettoWstępna wycena jednego wariantu
Who doesn't love a Bug-A-Salt fly killer? I love mine and I love the looks I get when I bring it out and eliminate those pesky flies and other bugs. Just for fun, I made this snap-on version of a rifle scope to make my Bug-A-Salt even…
Wydruk około 5,39 €–6,59 € nettoWstępna wycena jednego wariantu
Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed slower than other models. For…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena jednego wariantu
This is my original design. It is similar to a circle template. The circles match the outside diameter of copper pipe made to imperial standard gage. This was a tool of necessity. I needed a quick way to check every section of installed…
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
Hi! We are from Ukraine!!! This is a low cost periscope for the Ukrainian army by Ukraine, to help Ukrainian soldiers. If you can and want to help us to print models for this device, please contact me (agree on quantity/time/delivery)!!!…
Wydruk około 7,10 €–8,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Nicolaus Copernicus Monument - updated with UV Displacment. Good example of how sometimes uv displacement is just so so. Don't know how useful displacement of bird poop drip is.
Wydruk około 14,25 €–17,42 € nettoWstępna wycena jednego wariantu
I was inspired by the Prusa Core One Telescopic Spool Holder by dancan13f , and decided to create my own improved version. This version is flush with the side of the Prusa Core One when screwed in, which is more aesthetically pleasing. It…
Wydruk około 2,78 €–3,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wall Art Silhouette model of the AS 350 B3 helicopter. Adjustable size. I accept model suggestions or ideas you have.
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
This is relatively easy to print. Both pieces can be printed “right side up” so you can use 3-color filament or rainbow filament and have the colors match up. Because of the complex moves the printer has to make, it may need to be printed…
Wydruk około 3,72 €–4,54 € nettoWstępna wycena jednego wariantu
Anti flare lens cover for scopes such as snipers, tele-lenses and much more. Say no to being blinded by the sun or, in case of sniper use, to lens flare towards the enemy. With the honeycomb pattern you can see perfect through the…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
This is a stylized version of the JWST with an enlarged primary mirror with enhanced curvature, since that is the most striking detail of the telescope.
Wydruk około 1,77 €–2,16 € nettoWstępna wycena jednego wariantu
Set of rotors for (and compatible with) funny 3D printed toy Pull Copter Finger Ring . Basically it's two sets of remixed rotors: First set is a remix of original rotor from Pull Copter Finger Ring model from Agepbiz into two sizes…
Wydruk około 1,02 €–1,24 € nettoWstępna wycena jednego wariantu
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Remix of the Extruder Gyroscope Print in place with press fit magnets This gyroscope snap onto the Prusa Mini+ x-axis shaft without any magnets It is made for the Purse Mini+ but should be compatible with the MK3 / MK4 If not, let me know…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for Coptic stitch bookbinding technique Workable area is 8.5", perfect for Letter (8.5"x11") sheets turned sideways, markings are imperial with 0.25" (6.35mm) spacing on center of each 0.13" (3.3mm) hole. Markings are recessed…
Wydruk około 5,38 €–6,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A phone mount for the Hadley Telescope to help with finding celestial bodies. This allows you to use any star map app on your iOS or Android phone. This should fit any phone up to 8mm thick (including case) and 70 - 100 mm wide. I've…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
Bending machine for making brass rings for telescope eyepiece holders. I have introduced an improvement in some of my adapters for 1.25 eyepieces to T2 thread, available here in PRINTABLES. (see:…
Wydruk około 0,21 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two colour simple design, 120mm diameter, printed using 0.15mm layer height, Prusament Galaxy Black PETG and eSun Yellow PETG. Apply the colour change at layer 14. Enjoy!
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bought a used Rescue Helicopter, but there was the Pin missing to hold the Rotor Blades. So i made a replacement. Print the Part sideways, so that the print get the Maximum Material stability, and doesnt brake.
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Always annoyed by commercial SEM stub holder for four stubs, while I can have five samples in one run. So I decided to design an holder for five SEM stubs (standard stub with a diameter of 3.2mm) The cover fits perfectly on top of it, but…
Wydruk około 1,98 €–2,42 € nettoWstępna wycena jednego wariantu
Less than 10 percent of people who download an item click the “like” button. Be the 10 percent. Click the “like” button and show your support. If you find this model useful, feel free to buy me a coffee . I was tired of buying and then…
Wydruk około 2,33 €–2,85 € nettoWstępna wycena jednego wariantu
This spinning top prints without support or other special configuration. The three parts can be easy assembled without gluing, simple snap in. And yes, this thing looks like the sign of a German car brand. Print instructions If you like a…
Wydruk około 0,84 €–1,02 € nettoWstępna wycena jednego wariantu
Remix of a remix of a remix :) I draw the socket that fits the MK4 Motor and keeps the gyroscope steady.
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
This remix includes both the gyroscope and the optical illusion You can print and use them separately or mix and match them to use together The connectors are made for the MINI but i added an adaptor for the MK3 No magnets required Print…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Make it a bit easier to stand your Hadley on the ground without the worry of tipping over. This is a remix of basically the same thing by emaxduck, however I found that model to be too small to stick onto a ½" aluminum rod. Have to assume…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Microscope arms are expensive. What isn't expensive are the multitude of vesa monitor mounts available. I wanted to use a vesa compatible gas spring arm for my Eakins digital microscope. I also wanted the ability to use standard…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena jednego wariantu
This print does tend to peel up away from the edges towards the middle of the print. I suggest printing with a brim to help prevent excessive warping.
Wydruk około 25,44 €–31,10 € nettoWstępna wycena jednego wariantu
(Popis v češtině naleznete níže) EN: Otherwise superb model of “Hadley” - astronomical telescope has a baffle that holds only on one rod. To make it sit where it shoud you need to fasten the screw very firmly. This remix fixes the baffle…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
This egg comes in 3 versions: 1 piece open design, 1 piece closed, and 2 piece closed. My print files are optimized for print speed, quality and time, but not strength. If you want these to be rugged, use 2 perimeters and 15% infill…
Wydruk około 3,32 €–4,05 € nettoWstępna wycena jednego wariantu
This remix includes both the gyroscope and the optical illusion. You can print and use them separately or mix and match them to use together The x-axis connectors are made for the Prusa Mini+ but should be compatible with the Prusa MK3.…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Extended baseplate for Makita Router with Copy Ring, it give you more stability and you can use with template. If you need any other size, just send request I will make it. Note: real photos are without rotation mark because I added this…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
Adaptable tray for telescope, for 1.75 and 2 inch tripods, with different inclinations and optional holders for tablets. (See also: https://www.printables.com/model/1040019-frame-for-models-of-telescope-trays ) After making several models…
Wydruk około 0,91 €–1,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Leonardo AW139 Helicoper Angle Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 0,91 €–1,11 € nettoWstępna wycena jednego wariantu
How to use: Place your collimator on the jig. Turn on the laser and point it at a distant wall. Rotate the collimator and observe the laser spot. It should ideally not move as the collimator rotates. Adjust the screws on the collimator as…
Wydruk około 1,54 €–1,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gyro rings, print test + 1 key ring Can also help you de-stress :) Allows you to test the distances between adjacent prints (print splice test) Spacing between rings: 0.05, 0.1, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.50, 0.60 and 0.70 mm.…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
This is a simple mount for a 5.5mm endoscope camera for the Prusa Mini. You can find these for around $20 or less on Ebay/Amazon and can be hooked up to a Raspberry Pi or PC. Check the size before as most of the "standard" endoscope…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Its just drone frame with legs. I printed this on 30 x 30 cm table soo it can't fit your table. Make sure that fit.
Wydruk około 3,77 €–4,61 € nettoWstępna wycena jednego wariantu
Robo Knob Drill a hole for screw mounting
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
WARNING: NEVER LOOK DIRECTLY AT THE SUN THROUGH A TELESCOPE, BINOCULARS OR WITH YOUR UNAIDED EYE. This is a tool for a known problem: If your telescope has a sun filter (and it must have a sun filter for looking at the sun!), you can't…
Wydruk około 0,68 €–0,83 € nettoWstępna wycena jednego wariantu
18-Rabbit Lord : Stela B from Copan : The front motif. The "18 Rabbit" title! It's a fascinating glimpse into Maya naming conventions and their relationship with their calendar system. Waxaklajuun Ub'aah K'awiil , the 13th ruler of Copán,…
Wydruk około 10,92 €–13,35 € nettoWstępna wycena jednego wariantu
flat in-view rotating XY table for microscope SMD assembly and inspection Just 26 mm high but featuring 2 axis plus rotation. Use either stick for rotation around center axis. Twist the sticks to move the XY table with gear-reduced…
Wydruk około 3,76 €–4,59 € nettoWstępna wycena jednego wariantu
Let's celebrate the launch of the James Webb Space Telescope with a decoration fit for the Christmas time. :) Fingers crossed for the operational deployment of our beloved telescope. This model mimics the mirror arrangement on the JWST.…
Wydruk około 1,26 €–1,54 € nettoWstępna wycena jednego wariantu
NH-90 NFH Military Helicopter Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
MD Helicopters MH-6 Little Bird Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
allows you to position a bar/rod between two surfaces and by rotating the male into the female in/out you can fix it.
Wydruk około 3,46 €–4,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Wydruk około 1,88 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wikipedia: A Pinard horn is a tool used to listen the heart rate of a fetus during pregnancy. This is my second attempt (the first one was bigger and didn't work) and this is fully functional although some times it's hard to find the…
Wydruk około 3,41 €–4,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Holds five microscope slides at the same time to stain them in Coplin Staining Jars. Created interchangeable handle
Wydruk około 3,11 €–3,80 € nettoWstępna wycena jednego wariantu
Coperchio di ricambio per tagliabordi a batteria 20V PARKSIDE PRTA 20-Li Replacement cover for cordless trimmers 20V PARKSIDE PRTA 20-Li
Wydruk około 5,07 €–6,20 € nettoWstępna wycena jednego wariantu
I recently purchased a Burris droptine rimfire scope and found that the magnification ring was extremely hard to turn. Decided to Design my own throw lever rather than pay $30 and get one that only hopefully works. Uses an M2 nut which is…
Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu
Pentax 100 SDUF is a classical imaging telescope, however, with the helical focuser that I detested. The default gear of Smallrig mini follow focus 3010 is 0.8 mode with 43 teeth, by adding the follow focus to Penatx 100 & changing its…
Wydruk około 0,87 €–1,07 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This mirror is meant to recreate the look of the James Webb Space Telescope mirror array. I picked up some gold mirrors on Amazon and designed frames to hold them each in place with a dot of glue. Each frame is keyed to slot into the next…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
An 80mm² lens-board for the Horseman 45FA field camera with a Copal #0 (34.6mm) opening. This is modelled as accurately as possible from an original piece. There are 2 sets of files here - one I originally did in PETG and then a later one…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Tips: for few first layers reduce printing speed to about 60% directly on printer, that gave me consistent results and didn't tear or smear filament (could be some non clean spots on printing surface, so clean carefully before printing)
Wydruk około 1,62 €–1,98 € nettoWstępna wycena jednego wariantu
This is a holder/organizer for Copic “Classic” Markers. It features slots in the side for later expansion, allowing you to connect multiple holders together with the “Expansion Connecter” piece (I will probably make addition desk…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This holder is specifically designed for the Depstech DS300. It comes in 4 parts that screw together using 4 M3x30mm screws. To assemble, be sure to slide the left and right clips onto the main body of the endoscope before attempting to…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Meant to be used with Tripod Mounting System , this holder gives you a safe place to keep all your lens covers when not on the telescope. Socket head screws feed through the front of the holder and lead out the back. Holder mounts to one…
Wydruk około 2,72 €–3,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Info: simple periscope you need mirrors the plate for mirror is 4.5*6.2cm it is a remix for nice UA periscope by xanoy (thanks) i have adjusted original model size (little bit smaller) and added a tube for given size you can scale tube on…
Wydruk około 5,21 €–6,37 € nettoWstępna wycena jednego wariantu
This is a very overcomplicated helicopter to protect an egg from cracking upon being dropped from a high height. It requires a few extra parts. PARTS 6 1ft Skewers - About 3 mm or so, you can drill out the holes more if needed. 2 Bearings…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Airbus Helicopters H130 Wall Art Silhouette model. Adjustable size. I accept model suggestions.
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
I have made some clips to lock the skid of rc helicopters for transport. 5mm, typical 450 size. 8mm, logo 600. 9mm, Align 700N.
Wydruk około 1,14 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Leonardo AW139 Helicoper Wall Art Silhouette Model. Adjustable size. I accept model suggestions.
Wydruk około 1,02 €–1,25 € nettoWstępna wycena jednego wariantu
There are two groups of files for this. One is just the front and rear caps. The other is the front cap with a kill flash. Shockcord Cap with Killflash: I have ‘remixed’ and added to this kit by creating an optional front killflash/anti…
Wydruk około 13,08 €–15,98 € nettoWstępna wycena jednego wariantu
-NON PRINTABLE : *2 M5 screw as many rubber band as you need The DIY telescope phone holder is a clever solution that allows astronomy enthusiasts to easily document their celestial observations. Made from plastic, this holder securely…
Wydruk około 2,70 €–3,29 € nettoWstępna wycena jednego wariantu
Support on handle only
Wydruk około 1,29 €–1,58 € nettoWstępna wycena jednego wariantu
The d-pad and button simply snap onto the original button heads and hold without glue. Print recommendations: 0.40mm nozzle 0.15mm quality/layer high
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to make a soldering microscope that is freely positionable over the work. So I modded my generic digital microscope with 35 mm tube. You need 2x(M4 nuts and bolts) and might use some washers for ideal spacing. Please print with…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
One-handed differential probe for two-channel oscilloscope with math function. With dual acupunture-needle handle holes for alternative or additional pins pointing to same probe tips center location. With adjustment screw, M3 hex nuts and…
Wydruk około 1,44 €–1,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
