Liczymy pasujące modele…
Print Settings 0.4mm 20% infill Support - Touching Build Plate Scale to 10% design is 10:1 to allow for detail. Can be printed with support and face down for quick/draft prints in under 1h, or with support face up for higher quality…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Printing Case and Lid: PETG or PLA recommended 3 Perimeters .20 Layer Height 10% Grid or Rectangular infill Inserts: TPU or other flex recommended 0 top and bottom layer 10% gyroid infill 2 perimeters 2-Feb-2026 Added Case with Handle…
This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes on the right side that match the side vents of the Lenovo Tiny PC Bracket is secured to the card…
Brodit design phone mount for Mazda 2 (DJ) 2015+ and CX3 Ball Phone Mount need 4 x M2.5 x 8mm to screw at the holder And need 4 brass insert M2.5 * 5 Recommend print with PETG or ABS . Holder V2 I just redesign with thicker body and use…
Inner Ring has been updated to make mounting substantially easier. Also the wheels are (and always were) compatible with Injora brass inner beadlock rings. Not to be confused with their inner wheel weights. [Rear wheel half has been…
Here are some basic rear links for the SCX30 to increase your wheelbase by 5mm. These probably wont fit your stock bodies without modification obviously, but can work will on custom and fenderless rear bodies like the one shown (coming…
Update: V2 - file name Version 2 moved from ball joint to more secure variation connected with m3 screws. Gravity phone Holder is also modified in prusaslicer with modifiers to secure it with m3 screws. First version I have printed in…
Scx30 Wheel Weights. No modifications required to the stock Scx30. Prints quickly and without supports. If printed with PLA, each wheel weights approximately 1.3 grams. Denser filaments might be better for making them heavier if needed.
This is a remix of the bollio's original model on thingiverse . I have added some cutouts to improve airflow. The original auther stated that this baffle was for the Mellanox ConnectX-3 CX312A. But I have a CX322A, and it works just fine.…
Front mounts. Couple different heights. Rear is adjustable. Trim rear as needed to fit. I'll revise where needed and update files. Comment/Message with any questions/advice.
I wanted to install a 40mm fan on my M920q to help cool the SFP+ Mellanox card I had laying around. So I modified the ITGear Top vented case design they uploaded to Printables. V1 Is as per my photo. V2 is slight adjusted and should have…
cleaned up and redid some of the angles on the tabs
m720q or m920x to hold a Mellanox ConnectX-3 CX312A / CX312C / CX322A
Print with outward facing/flat side down. Includes three holes for M3 threaded inserts to secure the bracket to the NIC and the case of the M720q. But it should also hold reasonably well without threaded inserts by securing the bracket…
After making a set of functional beadlocks for stock tires I adapted them to fit the larger RC4WD tires. These work and fit like my previous beadlocks, and I've copy and pasted most of the assembly info down below incase you havent seen…
Prints face down, then whilst still warm bend the end to make the “L” shape for a standard bracket. There is a relief in the model that helps with bending to the correct shape.
A second version of SCX30 blades. I extended the frame stop by the shock mount to prevent overcompression and jamming up at the frame. Same geometry as the early version except for that change. These work in PLA or PETG. But they are…
I needed/wanted a small little mount that lifted the truck off the wheels slightly but was still compact, so I drew this up. the part of the mount that contacts the truck is slightly wider than the skids as it is intended to be used with…
2.5in SSD caddy for the hot swap bays on the Sliger CX3701 storage server case. This might also fit the CX4712 or other Sliger storage cases, but I can't guarantee it. Printed on a Prusa MK3S+ with eSUN PLA+, but I'd recommend PETG to be…
Made for a 4010 blower style fan. The one i have is 5V which i've connected through a USB cable. Afaik it's also available in 12V variant. I cannot tell you if it fits other 4010 fans like this, but the size does seem standard. The fan…
Replacement wheel hex for Injora SCX30 D19 wheels.
Make an awesome gooseneck trailer for your tiny truck.
Its a fitted designed cupholder
This is a remix of Matthew Neuforth's PCIe bracket for the Mellanox CX354A, adding an LED window. This is a PCIe bracket that can be used on your Lenovo Tiny PC with a Mellanox CX354A (and possibly other 40gbe cards) ⚙ Features Vent holes…
Just another iteration in the SCX30 design process. The shock mounts are countersunk 1mm for better angles on the struts. I'm printing these in PLA at 0.16mm layers. I'm using manual tree supports for the rears, with PETG interface for…
A simple fan support bracket for the Mellanox CX311A. I used a spare 4010 24V blower fan from an Ender 3 printer. The 24V fan allowed me to connect it to 12V, making it spin very slowly, yet it was still able to cool the card effectively.…
Remixing different sources to create a rear that I needed: support for R9 antenna, and also has a sma hole on top. Planned to print in TPU; but actually printed in PLA with a perfect fit (see photos) If you print this would you mind…
If your model does not come with any buttons and you want to add more storage for maybe keys etc.
This model took me F O R E V E R to make. The sizing, the scaling, the making in general, the testing. This was hard work and it took me a whole roll of filament on JUST TESTING. So please, enjoy this model, post makes, like, and most of…
This is version 1 of my take on fixing the Yolco GCX37 to the floor of our California. The legs are quite bulky because I wanted large security margin for fully loaded fridge. All printed in PETG and I recommend keeping it out of reach of…
200x85mm footrest plate. Fit for Mazda CX3. Probably other models as well. You need some velcro tape.
This is a scaled down version of my existing 1:24 scale RTT using the dimensions of the Thule Approach M IRL scaled to 1:30 to be used on the SCX30 or similar sized vehicles for a scale overlander look. Printed in PLA using 8% infill to…
a bumper for the scx30
Sliger CX3702 - Fan Mod A 3D-printable front panel adaptor that adds triple 120mm fan cooling to the Sliger CX3702 (and compatible face plates). Description This is a 3D-printable spacer for the Sliger CX3702 front panel (and any Sliger…
this remix fits a MEUS remote. I have yet to test it. also the vehicle storage area is maximized. i also included a filled in blank. happy remxing!
TPU seal for OMRON NE-CX3 air pump. TPU A95 Layer height: 0.2 mm Width: 0.4 mm Perimeters: 100 Top/bottom layers: 0 Speed: 20 mm/s Extrusion multiplier: 1.20 Temperature: 210C Apply little amount of silicone-PTFE lubricant prior…
Wall Mount for SCX30 – Rig, Remote & Battery Simple wall mount designed for the SCX30. It holds your rig, the remote, and extra batteries all in one place to keep your workspace clean. Features: Holds the SCX30, remote controller, and…
m720q or m920x to hold a Mellanox ConnectX-3 CX312A / CX312C / CX322A
Welcome to The Low Poly Auto Show! This is a Mazda CX30. Print this model with NO SUPPORTS if your bridging skills are up to the task. Details/fit may not print as intended if the print is scaled down. Each remastered model is designed to…
