Liczymy pasujące modele…
This is a cover plate for the Noctua NH-D15 cooler, designed to obscure the exposed heat pipes and give a nicer appearance. It has been styled to match the front face of the Fractal North PC case. You will need two of them.
If you have a Dell laptop with a USB-C Dock connector you need this! These connectors are flimsy - putting things around or near the cable that rest on them and put any downward pressure will bend it down and eventually destroy the USB-C…
Mounts between DELL monitor stand or VESA compatible holder Requires new bolts Print instructions PLA or similar stiffness 100% infill 3 perimeters 0.2-0.3 layer height 0.6 nozzle
At first I just wanted to change the height of the original model to fit my Latitude 7490. After printing small slice of model to test fit, I realized that's all you need. It prints below 10min and uses ~30cm of filament. Tested with…
Printable on BambuLab 256x256x256 bed (biggest part - base is actually 231.52 x 251.08 x 127.54mm) - just let it auto rotate it. Supports for long overhangs are recommended (I used auto tree supports). No screws (other than for securing…
About This design allows you to mount a Dell docking station (WD15, WD19 or WD22) to a Dell P3421W monitor. You can either use no additional hardware or the official Dell Docking Station Mounting Kit to do so. BOM (Always) For the…
Special thanks for CWempe for modelling the docking station itself. Link to their version of the bracket Under table cradle for Dell WD15 docking station - we needed a way to stick it near the cable opening in the meeting room so that the…
The headlamp mount for the Wurkkos HD15 flashlight. With this mount, it is much faster and more convenient to mount the lantern on it. It is attached with a click and holds securely. The ribs on the mount do not allow the lamp to move. It…
A clip to mount the Dell WD15 laptop dock to the underside of the desk for cleaner cable management.
This is a remix of this file: Mount for Dell WD15 docking station (upside down) by CWempe - Thingiverse Use two M2.5 Screws to fix the adapter to the dockingstation. Use two at maximum 4mm diameter screws to fix the adapter + dock to the…
You can change any dimensions via Fusion 360 user parameters to fit any existing drill model. If you don't have fusion 360 please contact me with your drill dimensions so I can change the model to fit these drills as well. All comments…
Dell vesa docking station mount
A spacer for Gaggia Grinder RI8123/01 MD15 This is a spacer u can easily put in the top part of the grinder between the plastic and the metal cylinder. just unscrew the two little screws that keep the two parts together and place it in…
These are simple water trays or drip trays for the the popular and practical CD15 and CD30 seed module trays designed by Charles Dowding and manufactured by Container Wise. These seed module trays are my favorites for growing vegatable…
Festool Handschleifknauf für für die Schleifteller ST-STF D150 von Festool Rotex RO 150 Ich habe mir diese Version so konstruiert, damit ich wenig Stützmaterial benötige und evtl. das Unterteil tauschen kann, wenn es verschleisst. Festool…
Underdesk mount for dell docking WD15 Docking station. 90.50x30mm (wide and height). Designed to be held with countersink screws (3.5x25mm)
A 10mm shortened version from Zocazol. Slightly beveled + reduced hole for better fixing of the side. I did this for my Noctua D15 which fits just right. The lower extension brackets are not needed, stick to the original bracket. If you…
Hello i have made this E-stop for the AMC-AASD15A servo controller from https://www.thanos-motion.com/products/thanos-amc-controller-rgb-v1-4/ https://www.thingiverse.com/tronicgr/ The E-stop is made with Multi material printers in mind…
Quick design to hold a Dell K17A WD15 under my desk. Designed to be support free, pieces are correctly positioned in the in the 3mf file. Holes in the models are for 3.5mm countersunk wood screws
Potřeboval jsem specifický rozměr krytky, protože obkladač se zas tak úplně přesně nesešel s topenářem. Zároveň jsem vyřešil i barvy. A jak je u mě zvykem, projektový soubor pro Fusion360 je přiložen.
D150MM Sanding Discs Organize Holder No unnecessary material waste Reduced printing times Achievable even with A1 Mini Designed to be durable Stackable elements Compatible with the Gridfinity system Available in various heights H25 - H40…
I designed a simple transport case for a FNIRSI 2D15P mobile multimeter and oscilloscope. I wanted to protect it from scratches when i transport it in my bag. On one of the photos i experimented with a descriptive text on top which i…
Remix of Notebook stand for print on Prusa MINI. Inside the stand fits dock Dell WD15, on picture is Dell 7390. https://www.prusaprinters.org/cs/prints/14888-notebook-stand Print instructions Was printed with PETG, 0.25mm, with supports,…
## Print settings: Material: PETG - Layer height: 0.2 mm - Perimeters: 4 - Top/bottom layers: 10 Cuttings of transparent PETG can be inserted into the holes for the LEDs. Assembly does not require glue, but you can apply a little glue to…
Designed to mount under the desk. is a very tight fit so if you need more height scale up the vertical dimension. Designed for the dock to only fit in one way, front of dock should face the side with the larger walls. print with supports,…
Stand for older Dell docking station WD15
Drill/Screw bits holder for Makita LXT DTD155/DHP483 and maybe other Makita tools. Includes holes for 6x2mm magnets. Holes should be tight enough but you can always add some glue to make sure they stay in place. OpenSCAD source code…
I needed a smaller mount for the Dell WD15 docking station so I could print it on the Bambulab A1 Mini.
Repair your Dell WD15 / WD19 dock USB connector with this case. For good visual effect : Select good filament quality (Carbon Fiber for example) Print with concentric top fill pattern Use lowest resolution Gently remove supports Once…
Thought the plate was thicker than needed, and I don't use the top head straps(they are all too short for my fat head!), so I thinned out the plat, and clipped the top loop off. Not the most streamlined job(lost some round overs) but it…
Hi, it's my quick flash holder for wurkkos HD15 and other Angled flashlights. handlebar 25-30mm. Light 21-25mm you need: 1pcs Screw M3x35mm 2pcs Screw M3x20mm 3pcs Nut M3 Cap for wurkkos HD15 is in my channel :)
The flashlight cap cuts off the light so you don't dazzle. It does not reduce the range of the flashlight, but only cuts off the top half of the light beam, like the lights in a car. In the pictures you can see how it works. The first was…
This is a under-desk mounting bracket for the Dell WD15 USB-C dock . This model leaves a bit of space on the top for cable routing, and the power supply bracket has some hooks for additional help with cable management. It's a good idea to…
Picatinny-Lampenhalter D15X60 Gemacht für Lampen, Laserpointer oder ähnliches mit einem Durchmesser von 15mm Lässt sich mit 2 Stück M4 Schrauben und Muttern an Picatinny befestigen. Enthält einen verdeckten Tunnel für einen kleinen…
If you are using a Noctua NH-D15 CPU cooler in your Corsair 2000D, you are required to remove the OEM fan bracket that comes with the case. This fan mount allows you to mount a single 140mm or 120mm fan above the Noctua NH-D15. This fan…
Could not find these any longer so created them in Fusion and printed them out in TPU98. Seems to be working fine so far, and if they do fail I will just put in some new ones :) I printed them flat so the filament would be pulled in a way…
I threw together a mic holder for my pd170 since it was missing. I printed in PLA with the top oriented on its side, and the bottom with the threads facing up. Make sure to use supports! It uses a short 1/4-20 screw to hold the mic in,…
Use the four screws to attach mount to the table
This telescope project is still under development. Please read this description carefully before attempting to build it. The assembly requires 4 aluminum or metal rods, each 750mm in length and 20mm in outer diameter, along with 24 M5…
Little Box on the Back of the 2D15P to Hold all Cables and Probes. two Scrows M4x6 or M4x10 are needed
Nest for Fenix LD15R , which has a magnetic base. Insert the magnet or a coin to help hold the flashlight in place.
The original model is a great design but I wanted mine to have rounded light shades as that's the normal design here (at least in the US). Also, I wanted to print the body in yellow and shades in black and my ERCF is not currently setup.…
Griff kann, wie im Bild ersichtlich, zusammengesteckt werden und benötigt keinen Kleber! Drucker: Bambulab X1E Düse: 0,4mm Schichthöhe: - 0,2 mm - Markisengriffhälfte - 0,1 mm - Pin Wandlinien: 3 Fülldichte: 41% Füllmuster: Dreiecke…
This model is a desk edge mount for the Dell WD15 USB-C docking station . The dock slides into the holder and can be partially pulled out (~20 mm) to improve access to cables, while still remaining supported by the mount. It is intended…
this is a mute made specifically for a martin d15. the PLA file has looser tolerances, you'll want to wrap some electrical tape around the cylendar that goes in the sound hole (I did that to prevent scratching). the TPU model is really…
all D and F series parts are Compatible
10 inch rack mount plate for PSU with wago 221-415 sockets and terminal cover
This cap will work with all Platinum MSD1500B mechanical pencils. I print it with TPU with 0.4mm nozzle and 0.08mm layer height. You will want to use the highest accuracy for this print job as you want the cap to fit tight with the tip.…
Adapts Amazon Basics heatsink for Asrock Rack D15XXD4I boards (e.g., D1521D4I, etc.) with Intel Socket BGA 1283. Reuse the original heatsink screws. Print two copies of the adapter. The angled part faces outward, while the rounded part…
The Nocuta NH-D15 is one of the best coolers on the market, but due to it's silver and beige color scheme and lack of RGB, it doesn't fit in with a black & RGB color scheme. This RGB shroud simply slides on over the heatsink in a way that…
Modified AMC_Main_Remote_TOP to be printed in one part without the AMC-LCD_plug_Remote and the AMC-encoder_plug_Remote. also made the numbers a bit bigger and possible to be printed in multi colors. numbers can also be printed separately…
Support for the DELL WD 15 docking station that is quick and easy to print. All it requires are 2 M,5, or M3 screws and a 3D-printed locking wedge. Features: Easy to print with just 2 parts and no supports required; The 3d printed part is…
I remade the Thanos AMD-AASD15 top plate to have the numbers right-side up, and the Thanos logo emedded for multimaterial printing. enjoy! Print Settings Printer Brand: Prusa Printer: i3 MK3 MMU 2 Rafts: No Supports: No Resolution: 200…
Jednoúčelová spojka pre spojenie pevnej rúry KG160 a flexi hadice D150 , použité pre odsávanie pilín na pojazdovej píle. Na strane flexi hadice je vytvorený jemný závit pre bezpečnejšie kotvenie hadice, preto je potrebné ju natočiť na…
C'est un palier plastique qui remplace la référence 06 de l'éclaté de l'enrouleur Facnor SD150. Cette référence ne se trouve plus auprès du fabriquant, je n'en ai donc pas trouvé le numéro de référence. Pour retrouver le profil, j'ai…
The perfect fan grill for your Nix machine.
écrou M16 pour bride D15mm / D18mm
A simple mount for the Dell WD15 docking station. In my case, I mount it on the unused second arm of my VESA monitor mount. I created this model in Blender and printed it in PETG.
Plastic usb-c cover on Dell WD15 brakes easily. Made a replacement which fits my wd15 version. Glue them together
Repair your Dell WD15 / WD19 dock USB connector with this case. For good visual effect : Select good filament quality (Carbon Fiber for example) Print with concentric top fill pattern Use lowest resolution Gently remove supports Once…
I designed a simple transport case for a FNIRSI 2D15P mobile multimeter and oscilloscope. I wanted to protect it from scratches when i transport it in my bag. On one of the photos i experimented with a descriptive text on top which i…
Printable on BambuLab 256x256x256 bed (biggest part - base is actually 231.52 x 251.08 x 127.54mm) - just let it auto rotate it. Supports for long overhangs are recommended (I used auto tree supports). No screws (other than for securing…
parts for : Ultegra shimano 10000 - line safety guard Part Number : RD15149
Special thanks for CWempe for modelling the docking station itself. Link to their version of the bracket Under table cradle for Dell WD15 docking station - we needed a way to stick it near the cable opening in the meeting room so that the…
The door for the battery compartment of a Sangean PR-D15 radio.
For the best print flip the models on their top instead of their perimeter. Keep the nozzle temperature for the nozzle above or around 205°C (for PLA) and bed temperature at 55-65°C for the best results
Support for the DELL WD 15 docking station that is quick and easy to print. All it requires are 2 M,5, or M3 screws and a 3D-printed locking wedge. Features: Easy to print with just 2 parts and no supports required; The 3d printed part is…
This adapter is to direct part of the 120mm fan air flow to allow for active cooling for RAMs. You will need 4x M3x5x4 threaded heat inserts so you can thread the fan directly to the adapter. The adapter itself is a sliding fit held by…
Experimental left and right pick handles for Southord PXD15 set. You might need to adjust the opening depending on your printer. To insert the pick, print it with opening slightly smaller than the pick shank with PLA, heat the pick a…
So i wanted to mount a noctua D15 to my Inno3d GTX 1070. I printed it in ABS and it holds up great for the 4 months ive been using it(still does as of jan 2024). My temps are great idle around 33c with 1 fan at 8%, gaming temps around 45…
Simple cylindrical door knob with a 3,4mm hole diameter 15mm, height 20 mm
Textured PEI Plate PLA, PETG etc printed just with walls Inner diameter = 15mm (closed) Thickness/ height = 4mm
Stackable, reusable, 15 pocket module tray for seeds. No supports required. I only created this so I could design a tamper/dibber for something similar which I will upload shortly. Images of corner test prints and slicer view. Enjoy! On…
parts for : Ultegra shimano 10000 - line safety guard Part Number : RD15149
This is a new version of the mount for the Wurkkos HD15 flashlight. The new version does not use m3 bolts. Instead, one part is forcefully inserted tightly into the other, and the mount remains collapsible. If necessary, you can fix the…
