Vase Mode Wing - SD7037 for gliders
Remix of the amazing wing by Tom Stanton but with the airfoil SD7037
- Pobrania
- 308
- Polubienia
- 12
- Ocena
- 0
50 modeli
Remix of the amazing wing by Tom Stanton but with the airfoil SD7037
Skateboard Rad / Skateboard wheel / Longboard wheel D70 x 43 !!! HAFTUNGSAUSSCHLUSS !!! Ich habe sie nicht getestet. Für den Reifen empfehle TPU möglichst hart (100% Füllung). Für die Felgen empfehle ich PETG (100% Füllung, vielleicht…
Skateboard Rad / Skateboard wheel / Longboard wheel D70 x 43 !!! HAFTUNGSAUSSCHLUSS !!! Ich habe sie nicht getestet. Für den Reifen empfehle TPU möglichst hart (100% Füllung). Für die Felgen empfehle ich PETG (100% Füllung, vielleicht…
Flared radiator section for USA Trains SD70MAC. This is style found on the later units with 4,300 horsepower. No body modification needed as this will slip over the existing air intake louvers however in order for this to sit flush, you…
This is a volume knob replacement for the Kenwood TM D700 transceiver. A layer height setting of 0.1mm, slow printing and supports for the outer ring are recommended. I used a 0.25mm nozzle. Print this object standing upright for best…
Suitable for sprays with a diameter of about 66 - 69 mm. PLA Nozzle - 0.4 Layer - 0.3 Fill 15% Brim
HO scale Pennsylvania Railroad full dormitory car class PD70R. Sleeps 42 crew members/porters. Two showers, three bathrooms, five sinks. Designed directly from blueprints from…
Parts to represent the late production (Tier-1 emissions) SD70MAC Locos that EMD built for CSX and Alaska RR. Also could be used for the Metra SD70MACH. NOTE: For proper fit cutting away at the lower radiator grill on the model is needed.
Use these covers to convert the USA Trains SD70 “floppy” motor block to a solid one. Recommend minimum 10' diameter curves.
SD70ACe flared radiator section for USA Trains SD70. This is a 3d printed kit that includes: Main Shroud, 4-Louver inserts and a fan plate to re-use the fans that came with your model. You must prime/sand/paint yourself. I designed this…
Sealed antennas like those found on the Alaska SD70MAC locomotives.
A Kadee coupler mounting solution for the USA Trains SD70MAC. I've provided a template to aid in cutting the notch necessary in the pilot. Uses Kadee #907
Winterization hatch found on the SD70MAC Tier 1 HEP locos built for the Alaska Railroad. Requires the flared radiator modification https://www.printables.com/model/653905-late-production-flared-radiators-for-the-usa-train You will also…
This is a holder slot for mounting under a working table for Dewalt DCD706 12v hammer drill driver. Settings: Filament: PLA, PETG Infill: 25% Wall count: 3 to 4 Support: No
This adapter is made to be used with the replacement covers for the SD70 motor blocks. Allows re-use of the Aristo-Craft GE side frames. No need to cut the axles short as they line up with the large holes in the side frames.
Replacement release clip for Velbon tripods D700 but I'm sure it will fit other Velbon models as well Category: Hobby
Replacement volume knob for the D700 with indicators for knob position. Printed in PETG with a color change. Supports along the outer edge only, not the center. Printed with 0.4 mm nozzle at 0.1 mm layer height.
Cabinet Bump-out found on Tier 1 emissions version of the SD70MAC locos. Located on the engineer side under the intake grille.
HEP inverter cabinet found on the Alaska RR SD70MAC-HEP - dual-service passenger/freight locomotives.
A protective case for the CED7000 Shot timer with the silicone skin . I have a lot of crap in my range bag, and I wanted something to protect the screen of the timer, as well as eliminating the possibility of it accidentaly turning on in…
My SONOS Beam blocked the view of the TV… The feet are not high enough. A small raise of about ~17mm (15mm for the print and a 2mm for felt anti-scratch feet) When not r/TVTooHigh this should be plenty. Felt anti-scratch feet are…
Blank wall cover plate Need a custom part for your setup? I design print-ready models from photos, sketches and measurements. Request a custom design Dimensions: - "Small" diameter: 70mm - "Big" diameter: 110mm - Depth: 12 mm More from…
Screw M3x12 The inside will print meh…cause of the bridging, but you'll never see it.
I needed a mount to hold my speaker (Kenwood SP-41) and remote display for the Kenwood TM-D700, so I designed this and printed in PETG. I have photos of the install and perspective. Used black PETG and the following settings on the MK4…
Improved and flat bandsaw table insert , fits Hammer N2-38, Hammer N2-35 and more with respecting dimensions. The insert delivered with the bandsaw was neither flat or had some reasonable small clearance. Outer diameter: 70mm with some…
Black and Decker battery drill screwdriver bits holder. Clips on the drill hold 5 screwdriver bits Model: BCD700S 0-1400 RPM 0-360 no 10mm 18 Volts 1.5Ah 4x M3 x 3mm Countersunk Allen head bolts. 2x 20mm x 10mm With Two 4mm Countersunk…
I had been looking for a while to see if someone had uploaded some type of mount for the Kenwood D700A ham radio. I could never find one, so I decided to draw one up. This is a work in progress, although it worked for me right off the…
11/6 - UPDATE VERSION 1.2 - UPDATED PILOT SNOW PLOW TO FIX GAP SO SNOWPLOW IS SOLID 11/1 - PREVIOUS VERSION 1.1 - UPDATED CHASSIS TO HAVE A EASY ACCESS HOLE FOR USA TRAINS TRUCKS WIRES * EndCap_B and Center_F were updated. Main: The kit…
I just didn't want to use so much filament for the full holder, so I cut off most of it. 17g for me instead of 58g.
These are three mounting options for the Kenwood TM-D700 radio head that I've used recently. The first is a direct low-profile 20mm ball mount (for use with 67designs, Bulletpoint Mounts, or any other arm that expects a 20mm ball). Pause…
MKS PAD 70 Case Material list Battery 3.7v 4010 Fan 24v 4 uds DIN912 M3x16 (Screw front and rear) 4 uds DIN 912M3x12 (Screw rear and support) 2 uds DIN7991 M3x14 (Screw fan and rear) Print Settings Rafts: No Supports: No Resolution: 0.2…
The battery door latch for the D50 D70 D70S D80 D90 D100 cameras can break causing the door to not properly latch shut. This is a 3D printable replacement part for the latch. Print Settings and Recommendations: 0.2mm Layer Height 100%…
Lithophane depicting a UP SD70ACe (Flag)
A PCB mount for the LM40SAMFHD700AG25WV driver board used in one of the Lululemon Mirrors. Its a press fit but still has holes for mounting the PCB with hardware. The following hardware I used: 4x M3x4.2 Heatset Inserts (However better…
Carabiner clip for Imalent LD70 flashlight
A stand for an Imalent LD70. Probably would fit some other small flashlights. There is compartment inside model to fill with weight for better stability.
Material: PLA Nozzle Temperature: 220°C Bed Temperature: 60°C Layer Height: 0.15 mm Print Speed: 250 mm/s Infill: 15-30% (based on part strength requirements)
Spacer to bring up my BluRay-Player from the Amplifier and the Amplifier from the bottom. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: .12 Infill: 7 Notes: Place the spacer up side down. Best results for…
Hierbei handelt es sich um einen Absaugadapter für die Wippkreissäge Scheppach Wox D700. Der originale Adapter ist über die Jahre spröde und brüchig geworden. An ihn kann eine Absaugung mit 100mm Absaugschlauch direkt angeschlossen…
Cut the karibiner loop off and slapped on some molle connections so you can carry your flashlight on your molle rig. Alternatively, I made a rig to attach to a safariland leg shroud or other kydex sheath. The flashlight fits a certain way…
Spacer to bring up my BluRay-Player from the Amplifier and the Amplifier from the bottom. Print Settings Printer: Anet A8 Rafts: Doesn't Matter Supports: Yes Resolution: .12 Infill: 7 Notes: Place the spacer up side down. Best results for…
matches the TV controller 55OLED707
Button cover for Imalent LD70 EDC Flashlight to prevent accidental button presses when flashlight is carried in pocket or in a bag.
PHILIPS tv controller end cap (55OLED707)
I've had a pair of ATH-AD700 with a broken driver for a few years, and as I tend to do, I had disassembled them and promptly lost the purple grilles in one of many house moves. I came across the Capra Audio Satyr 4 and wanted to use the…
Custom 3D printable crevice tool designed specifically for the Adler AD7048 vacuum cleaner. In addition to the ready-to-print crevice nozzle, this release includes the original 3D adapter model in STEP format . You can easily import this…
The Skadis hooks come from this original design by Rod: Rod | Printables.com
Cut the karibiner loop off and slapped on some molle connections so you can carry your flashlight on your molle rig. Alternatively, I made a rig to attach to a safariland leg shroud or other kydex sheath. The flashlight fits a certain way…