Wyniki wyszukiwania: dill

Articulated Armadillo Lizard

dont use brim, be careful with scaling down

Armadillo Lizard - Articulated

This model's fully articulated at all joints, including along the spine. It sits comfortably on your hand and also likes resting on things. I've uploaded both the standard and NoMagnets.stl/obj files so you can choose to print either the…

Armadillo

Armadillo

Cute Articulated Armadillo Lizard

A cute articulated armadillo lizard

Articulated Armadillo Lizard

I wanted to make it multi-colored, so it took me a while to figure out the order of the parts from pictures and YT video from the original creator. In case anyone want to do the same, I upload my separate files for each color.

Armadillo Off-Road Truck 1/10 body for SCX10 III

Armadillo off-road truck body for SCX10 III Hard body that has been designed to fit the SCX10 III Base Camp builder's kit chassis (AXI03011). The body might fit other 313mm chassis as well but the mounts need to modified accordingly.…

Dillon Powder Adjuster Knob

For a more convenient knob, insert a magnet into the slot. The magnet should be somewhere smaller than 0.315 in.

Hex key wrenches holder for Dillon 650/750

A simple hex key wrenches holder, attachable to case collator rod. Use M4 bolt + nut for clamp. Print instructions No supports, no brim, any layer thickness will do, infill 20 - 25%.

Dillon powder adjuster

V2: Adjuster is now indexed in reverse (increase in weight increases in index). Arrow and plus/minus signs are wider.

Dillon 550 Manual Powder Funnel

I started reloading 6.5 Creedmoor using H4350 powder on a Dillon 550C. Since H4350 is extruded, the Dillon powder drop varies up to 0.3 gr of powder per load for coarse extruded powders. This means that each case isn't receiving the exact…

Dillon XL750 XL650 Case Station Retainer

This is designed to help prevent spills by adding support to the case as it indexes through the stations. The pins are integrated and should make it easy to replace if something happens. Category: Sport & Outdoors

Dillon 550C Primer Cup Collar

This is an extended collar for the Dillon 550 primer cup to keep spent primers from ending up on the floor. Tested on a 550c press but should work for all 550 series presses. There is enough clearance so the primer chute does not rub on…

CORDILLERA | Cutting-Board Rack

CORDILLERA | Cutting-Board Rack Introducing "Cordillera," your kitchen's new best friend. This 3D printed cutting-board rack combines elegance with functionality to keep your cooking space organized and stylish. Say goodbye to clutter and…

Primer filler for Dillon primer pickup tubes

Designed to fill Dillon primer tubes with primers, both small and large. This is a multipart model, print files are provided merely as sample, as modifications of print conditions on user side are assumed. Important notes: Device…

Dillon Locator Button Tap/Handle Upgrade

I keep dropping those small locator buttons on my Dillon XL 650 reloading press... This tap/handle is making my reloading life a lot easier. Tip: To get better adhesion and give time for layers to cool - print 3 or more tabs at a time. >>…

Dillon Primer Pickup Tubes

Both small and large Dillon Primer pickup tubes: Small Primer tube = .183 ID x 5/16" OD Large Primer tube = .215 ID x 5/16" OD Note: Does not include the end fittings. Print instructions These are in 6" lengths, so use the 30mm long…

modulo barandilla finger board

barandilla finger board recomienda hacerlo un poco mas grande de las medidas originales del modelo o al gusto

Dillon Powder Label

Dillon Powder Measure Label I created this powder label to slide over the clear plastic tube on a Dillon powder drop. A label can then be inserted into the main body. I have attached a label I have created already. If you need a label…

Rodillo Texturizador Hojas / Leaves Texture Roller

¡Descárgalo y añade un toque maravilloso a tus proyectos! Altura: 10cm

Primer Tube Hanger for Dillon Case Feed

I tried other primer hangers posted here but felt they needed improvements. Primarily, the primer tubes had to be press-fit into the hanger slots which seemed unnecessary. I designed this version so the pick-up end of the tube would just…

Seat belt - deactiv alarm. Acura, BAIC, Buick, BYD, Cadillac, Chery, Chevrolet, Dodge, Ford, GMC, for Honda, Hyundai, Infiniti, Isuzu, Jaecoo, Jeep, KIA, Lexus, Lincoln, Mazda, MG, Mitsubishi, Nissan, Omoda, RAM, Subaru, Suzuki, Tesla, Toyota + TRUCKS

Dillon xl650 Index Ring - Aro Indexador

In the project, there is the scaling necessary for the contraction of the ABS. It has additional support and perimeters. "YOU MUST PLACE THE METAL GUIDE PIN FOR THE SPRING" En el proyecto, esta el escalado necesario para la contraccion…

Dill Bit Fortnite

If you want to support me, you can send me some crypto and I'll buy a watermelon usdt(TRC20) - TPHUvYZXHKuB6Pj7wavXpkKApEzDJC83uN bitcoin - bc1qxh24prkt4mn6qv9jpyvwggnqd5nkrnx3qqsg94 ethereum - 0x9338A883Ac1bb7c75d7f6ca1A7D53c4021523369…

Armadillo Lizard - Articulated (Added tail magnet)

I did not print this. I added a hole with a heated drill bit, so I figured I would remix it to add the magnet hole in the tail. Category: Sculptures

Dillon XL750 Bullet tray

This bullet tray is for a Dillon XL750, it is similar to the original Dillon version

DIllon 650XL Case Ejector

Simply Dillon case ejector. Works with or without additional plate bearings. Also required M4 screw and nut. UPDATE: added "stronger" version 1.3 for weaker materials. If you are going to print using quality PETG v.1.2 is ok. ANOTHER…

Tool head stand Dillon 650/750

Stand/holder for Dillon 650/750 tool head and related accessories. If you have large die nuts or need to store primers slide assembly as well, check another model here:…

modulo finger board pirámide con barandilla

hay que agrandarlo en cura recomiendo imprimirlo de unos 20 centímetros de largo mas o menos

Articulated Armadillo lizard - 6mm glass eye compatible

Glass eyes really bring this little guy to life! 3mf with modifiers uploaded. Holes for 6mm glass eyes will appear after slicing. Don't use a brim. I painted on some supports for the tip of the tail but you can print it without supports…

Dillon Anti Wobble Pin for 9mm

Replacement locator pins for Dillon reloading presses and 9mm size cases. These put slight pressure against the case as it indexes and eliminates wobble and cuts down on powder spill. I designed these to fit in my RL1100 and I would…

Dillon XL650 Improved Powder Rod Shoulder Washer (P/N: 18086)

Replacement part for Dillon XL650 Press. Reinforced with thicker walls. Locking lug for secure installation (insert & rotate to lock). Can be used as a temporary replacement for the genuine Delrin powder bar reset bushing, but probably…

Dillon 650XL PINS (no #2 and #3)

Dillon #2 and #3 pin with handle. Print instructions Category: 3D Printer Parts Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: ,15 Infill: 100% Filament: Prusa PLA Post-Printing

Dillon 650 XL Primer Stop Switch v2.0

This is part based on https://www.thingiverse.com/thing:2809150 but redesigned from scratch for better fit and for 3D Printers (no aluminium required). Use PETG or better. You should use spring and ball or screw with rounded head as a…

Cadillac Emblem

Cadillac shield

Dinosaur Chip / Taco holder (Quesadillasaurus)

A stegosaurus themed holder for chips, street tacos, quesadillas — whatever!

Dillon Bellcrank Cube 13871 (plastic white square in powder bar Dillon 550 / 750)

This is my first ever published model, and yes, it's literally a square with a hole in it. I recently got a Dillon 550 and when I had powder issues I saw this stupidly small white square had fallen onto the floor - somewhere. I managed to…

Dillon Strong Mount Bullet Tray

Made this to help make reloading easier and not have to spend the money on Dillon's tray which I'm sure is nicer but this works well for me. I printed this in PLA and ABS, both works just as well as the other. The Print in ABS from my…

DIllon 550 Bullet Tray

DIllon 550 Bullet Tray. Smaller than the original. Can attach directly to InlineFab mounting plate. I didn't want to pay like $85 for a Dillon tray so I just made this. I don't really load too high volume on the RL550C and I have fairly…

Dillon 650XL Powder Quick Detach v3.0

based on https://www.thingiverse.com/thing:3265558 but redesigned from scratch. Now fits much better (IMHO) ;-) BTW. Here it is my site for reloads and reloaders http://reloaddata.pl Print instructions Category: Parts Print Settings…

Tool Head Stand Dillon 650/750 V2

This is an updated tool head stand, suitable for those having larger die nuts, or need to store primer slide assembly as well in the stand. No specific printing requirements.

Dillon XL750 XL650 Case Ejector

For ejecting the cases out of the XL750 and XL650, this replaces the ejector spring. I made this to provide clearance for the thrust bearing that I purchased to smooth my press. Uses an M3 set screw to lock in place. There's some…

Dillon XL-650 Index Bearing Cam

Replacing the steel Index Cam on the XL-650 with this Index Bearing Cam, you get a reduced wear, lower friction and a smoother reloading. It is much easier to feel whats going on, when reloading. To assemble, you will need: 1x 626zz…

Dillon Casefeed Hose Adapter

When using a Dillon Casefeeder to feed casings to the Rollsizer and Decapper, the provided aluminum hose adapter has too much play and can cause the interrupt switch to get hung up. Replacing it with this unit, which has a slightly wider…

Dillon Primer Follower Hanger

Hanger for the primer follower on the Dillon RL1100. I assume this will fit other models but I haven't tested it. The inside diameter of the clamp is 14.2 mm. Let me know if you have any feedback. Filament: eSUN PLA

Dillon 550 2 stage case feeder

as posted designed for 9mm, easily modified for other cartridges editing the bushings. uses a spare primer return spring for shuttle return. currently using a rubber band for stage 1 return till i find a suitable spring. will need 1/8…

Dillon Primer Tube holder Picatinny Rail XL650 XL750 650 750

I designed these holder to be compatible with my casefeeder mount and wall mount. It holds 5 Dillon primer tubes. I print them right side up. More free AzJake projects: https://azjake.com/pages/free-projects Print Settings Printer Brand:…

Dillon 550 Primer feed body Stabilizer

I was not satisfied with the stability and solidity of the attachment of the Primer feed body Stabilizer so I design a clamp. First model is only compatible with 550C frame so I design a second version to fit with 550B frame

Round Counter for Dillon 650/750 reloading press

This is a round counter for Dillon 650/750 Reloading press, it could be used to count other metallic items I suppose. Remixed from a round counter for Dillon 1050 reloading press found on the internet a couple of years ago. The counter…

Dillon 650 Tool Head Holder Wall Mount

Tool Head and accessory holder for Dillon 650 reloader printed out of PETG or PLA @40% infill. Could do less but test fully loaded.

Small tail armadillo lizard

A small armadillo lizard with half the print time of the original model ( Articulated Armadillo Lizard - Mini Dragon by Maty505 - MakerWorld )

Dillon Precision Primer Buzzer Body

Very simple STL to print the body of the primer buzzer. The body of my 40+ year-old primer buzzer was cracking and falling apart. I designed this to use as much of the original as possible. I also used the original screws and heat set nuts.

Dillon Case Feed Adapter

I found an OpenSCAD file for the Dillon case feed adapters and it did not work properly. I decided to re-write the file to work correctly and added labels to the case feed adapter. I have attached a few case feeder adapters for your view…

Dillon RL550 Powder Measure Knob

Drew up a new powder measure knob for adjusting the powder charge for a Dillon RL550B reloading press. Uses an M3 screw to secure it against the flat part of the bolt head. Recommend printing using PLA with 0.08mm layer height to get the…

Fortnite medallion CH6 S2 Dill bit

If you want to take advantage of an action that is prohibited by the license, contact us using the chat on this profile.

Dillon Case drop 9mm / .223 / 38Spec / 357 Mag

Standard replacement parts. 9mm (Dillon green), .223 (Dillon white) .38spec/357Mag (Dillon orange) Update 1: SHORT version redesigned to be more stable when using machine without case feeder. Update 2: Added version for GolluB Case Feeder…

Dillon XL-650 Primer Rod Holder/Clip

Where to put that primer rod when the primer feeder is empty? Print one or two of the clips and now you have a place to put that rod - just clip them on the safety primer tube and store the rod when not in use (see photos). Also works…

Articulated Dill Pickle

The dill pickle from fortnite for the perfect gift

Dillon Powder Measure Adjustment Knob

This is an adjustment knob for the Dillon powder measure bars. No need for a separate tool to adjust the powder throw. The knob includes information indicating how to increase or decrease the amount of powder thrown. Print Settings…

Powder Knob with grub screw for Dillon 550 Reloading Press

It is a knob for th epowder throw adjustment. My version has a hole for a M3 screw to lock onto the stock nut. The HEX is 10.9mm A/F to suit my Dillon press.

Dillon Powder Drop Seperator

Dillon Powder Drop Seperator This sits on top of the Dillon powder drop. When pulling bullets it will allow you to easily separate projectiles out of the powder. This version allows for the Dillon lid to be set on top of the powder drop…

Glorbo FruttoDillo

Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)

RODILLO TEXTURIZADOR HALLOWEEN / HALLOWEEN TEXTURE ROLLER

¡Descárgalo y añade un toque maravilloso a tus proyectos! Altura: 5cm

Cute Armadillo Keychain

Easy to make a cute Armadillo keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊

Baby Armadillo

Baby Armadillo, Can be printed on A1 Mini. You can print in PLA, PETG, ABS. Support can be removed very easily if you use my 3mf! You can choose from original, or AMS Version. Enjoy

Mr. Bulletfeeder Controller Mount for Dillon 1050/1100 SPLINED

This is a remix of the other model, incorporating splined inserts and matching splined halves to allow for 45 degree incremental rotation. No threads, assemble with #10-24x2.25" socket cap screw and nut. Version 2: Has deeper socket cap…

SBB Krokodillok Bonus Pack

New items, upgrades, merged parts and templates for Cammon's Krokodillok Ce 6/8 SBB 1:32 Spur 1 Four different categories based on filenames: Template -> Template for drilling, gluing or joining. Merge -> Original parts combined for…

Dillon Case Holder

Work in progress Case holder. I printed mine as is with no supports. The small flat part at the bottom between the clip and the holder is meant to be removed, just added so I didn't need to add a raft or brim to help the clip adhere to…

LED light for Dillon 750/650 press

No special print requirements, use any crystal clear PLA filament for the LED diffuser part. Designed for “long” LED types, for example OSW5DK6E61A. 3mf and gcode files are created in Ultimaker Cura.

Dillon Powder Funnel Die

Dillon Powder Funnel Die for 7/8-14 threaded presses. v2: Noticed some minor dimensional issues that didn't affect performance, but weren't optimal. Category: Sport & Outdoors

Bombardiro Crocodillo

Bombardiro Crocodillo generated with AI Image used for generate 3d in picture Background of image removed with: Adobe lightroom / You can also use Microsoft image editor, which have implemented automatic background remover Ai generated…

Flat roof mod for Armadillo Off-road truck body

This is a mod for the Armadillo SCX10 Off-road truck 3d printed hard body. Body can be found here: https://makerworld.com/en/models/556645#profileId-475535 It offers an alternative look for the roof. A flat version that is lower. Uses…

Cadillac Sign

Cadillac sign printed in 4 colors, color change at 3.2mm 3,6mm and 4.2mm. I used white background, silver bottom of badge, dark gray sourronding the badge and text and finally black for Cadillac text. I used hilbert curve as toplayer

Punkerdillo Armadillo MMU remix

remix with painted punk skin

Armadillo interceptor

After ALOT of people asked me to make armadillo I finally decided it was time. Armadillo is a tornado interceptor made to drive into tornados. It was also the only tornado interceptor to be made in Texas! PLEASE DO NOT SELL MY MODELS I…

Better Dillon XL650 XL750 Bushing

This bushing is superior to the stock Dillon bushing which I broke. Print this on the flat side without supports as show in the picture. I used 30% infill with PETG and it's pretty solid. The hole needs to be chased out with a 3/16" drill…

Dillon Case slide 9mm and any other

Parametric Dillon case insert slide. You can generate any one needed for your calibre. Attached sample works with 9x19

Dillon locator pin tab (AR style)

Just another Dillon locator pin tab. However decided to put on some style. The tab represents the bolt face of an AR. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.20 Infill: 25%…

LEE APP adapter for Dillon case feeder

This design is inspired by these models: Lee APP ACP Universal Case Feeder Lee APP/Breech Lock Pro 4000/Six Pack Pro 6000 Case Feeder However, it has been adapted for use with the Dillon case feeder and features a tool-less system for…

Little pit stop - Cadillac de Ville

The model consists of car body, small wheels, large wheels, small off-road wheels, large off-road wheels, robust screws as semi-axles, car key serving as a socket wrench and smaller wrench with handle. It is fun for kids to change the…

Cadillac CTS VSport Logo

Cadillac CTS VSport Logo

Articulated Armadillo Lizard - 6mm glass eye compatible

This little dragon can't breathe fire, but it sure has glass eyes! :) I printed this one with no supports or brims. Definitely weren't needed. Printed it at 0.16 layer height as I print 99% of all my stuff that I print. I think it came…

Dillon Powder Drop Funnel

Put it on the top of your Dillon Powder drop and don't drop any powder anymore! :)

Tiny Cadillac Escalade ESV 2003 - Mini Cars Series

Cadillac Escalade ESV 2003, reduced to a small, clean object that keeps its main shape and character. Part of the Mini Cars collection — The model is simplified for a reliable print at a very small scale. Print tip: use a 0.2 mm nozzle…

Dillon Case Feeder to Spring Tube to Lee Tube Adapter

Wanted to connect my Dillon case feeder to my Lee 6 Pack Pro and APP. For some reason, the only adapters I could find were $45 on Ebay, which is absurd. There are 4 major components: Dillon case feeder to spring tube adapter. A spring…

Pegboard mount for Dillon 550 reloading press tool head

My shop has pegboard walls (USA pattern). I wanted to mount my various tool heads for my Dillon 550 bullet reloading press so they would be handy when changing calibers. I found a really nice mount on Thingiverse but it was made to screw…

Dillon 650 Ammo Chute and Bin

My problem was the original ammo bin. It's way too small. So I made a bigger one, a much bigger one. For this to work, you need the height extension for the press. Due to the weight of the ammunition, I printed the bin with hundred…

Cadillac F1 Team 2026 Multicolor Keychain

Cadillac F1 team inspired keychain, with a compact and elegant design. A perfect accessory for fans. Recomended print settings: Layer Height: 0.20 mm Ironing: All top surfaces Material: PLA, PETG ¡La pasión por la Fórmula 1 ahora cabe en…

Pegboard Mount for Dillon 550 Toolhead

My shop has pegboard walls (USA pattern). I wanted to mount my various tool heads for my Dillon 550 bullet reloading press so they would be handy when changing calibers. I found a really nice mount on Thingiverse but it was made to screw…

Reloading Dillon 750 and 650 toolhead holder / toolhead stand for tool wall

Dillon 750 and 650 toolhead holder for tool wall. The holder can also store all the parts from the dillon caliber conversion kit. The toolhead holder is made for a tool wall with square holes of 9 mm x 9 mm (0.354") and a pitch of 38 mm…

Dillon RT1500 Vacuum Adapters

Need this item but lack a printer? Check it out at my store through the following link: TACustomDesign Etsy Store I've held back from listing the final enhancements made to the adapter as they are exclusively available in my store. Dillon…

2003-2007 Cadillac CTS

2003-2007 Cadillac CTS model at 1:32 scale. The model can be printed in one piece, no assembly required. Print with supports. 10% infill is fine. A raft can help with bed adhesion, but is not required. This model is a heavily modified…

Dillon 550 Caliber Conversion Kit Holder

Holder for Dillon 550 Caliber Conversion kits. Holds 4 caliber conversion kits & can be mounted to wall, or just set on benchtop. Included a file with DP logo, and one without. Shown printed in Polymaker PA612-CF Category: Tool Holders &…

LEGO Cadillac Town Car 1933

LEGO Cadillac Town Car 1933

Cadillac Ranch - Amarillo, Texas USA

🇺🇸 Welcome to Texas! This model was created in Tinkercad by Dany Sánchez . Cadillac Ranch is a public art installation and sculpture in Amarillo, Texas, USA . It was created in 1974 by Chip Lord, Hudson Marquez and Doug Michels, who were…

Pineapple armadillo flexi articulated fidget toy

On the top of the head sits a small green sprout, resembling the leafy crown of a pineapple, which serves as a whimsical mohawk for the creature. The armadillo’s traditional leathery plates are replaced by a bright yellow, segmented…

Dillon Case Feed Adapter (Taper Added)

Update to tanders case feed adapter script. https://www.printables.com/model/691055-dillon-case-feed-adapter

Taza Jack Skeleton - Pesadilla antes de navidad / The Nightmare Before Christmas

Funny mug based on the character Jack Skeleton / Skellington from the movie "Nightmare Before Christmas" to decorate your room and give a terrifying touch to your house 👻 This file is for private use only and its purchase is prohibited…

Shark Ridill 2 GoPro Chin Mount

The Shark Ridill 2 GoPro Chin Mount is a 3D-printable accessory designed to securely attach a GoPro camera to the chin area of the Shark Ridill 2 full-face helmet. This is a remix of the original GoPro Action Camera Chin Mount for Fox V3…

Dillon Simple Tool Holder Picatinny Rail Mount XL650 XL750 650 750

This tool holder was designed to be simple and compact. It holds all the required allen wrenches for servicing a Dillon XL650 More free AzJake projects: https://azjake.com/pages/free-projects Other designs and files are available at:…

Vintage Cars - 1980 Cadillac Superior Coach Hearse

Vintage Cars - 1980 Cadillac Superior Coach Hearse 3D printable model.