Liczymy pasujące modele…
A set of leaf coasters and decorative holders. These coasters will catch the condensation from your glass and you can use it to water your plants! Nothing quite like free water, right? When you're done with the coaster, plug it back into…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
A set of 12 coasters with a storage container, all based on the different infill patterns that are available in Prusa slicer. The coasters are printed in two different colors with a color swap on layer 3. Print instructions The set is…
Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu
Drinking Horn
Wydruk około 16,88 €–20,63 € nettoWstępna wycena jednego wariantu
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Wydruk około 16,29 €–19,91 € nettoWstępna wycena jednego wariantu
A simple orange drinks coaster I designed for our daughter. Please do let me know if you use it!
Wydruk około 1,27 €–1,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Igloo 5 Gallon Drinking Water Cooler Cup Holder for Solo Cups with marker holder I wanted to use larger solo cups with my cooler when at outdoor events. I think the stock tube comes is smaller, for the paper disposables. With this…
Wydruk około 4,29 €–5,25 € nettoWstępna wycena jednego wariantu
0 dificultad de impresión
Wydruk około 0,19 €–0,23 € nettoWstępna wycena jednego wariantu
This is a solution to getting the Drinkmate CO2 pressure bottles off of your kitchen counter and (hopefully) looking cleaner while being rapidly accessible. We purchased a Drinkmate machine several months ago and use it daily; this means…
Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu
Cup/bottle holder; Height: 15cm; inside diameter: 9.4cm Fits 1L /32oz nalgene bottles, ninja smoothie bottles and other large bottles. I also made the clip for it slightly tighter (2mm) and 1mm wider around the attachment part so it sits…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena dla PETGMateriał u źródła: PET
DICE CONTAINS: 1.) FACE- DRINK (DRINK 1 TIME) 2.) FACE - 2X (DRINK 2 TIMES) 3.) SKIP - (YOU DON'T HAVE TO DO ANYTHING) 4.) DARE - (TAKE A DARE, AND YOU MUST DO IT) 5.) SHOT - (TAKE A SHOT OF DRINK OF CHOICE) 6.) CHOOSE WHO DRINKS - (YOU…
Wydruk około 1,32 €–1,61 € nettoWstępna wycena jednego wariantu
A simple stand to dry straws after washing. I printed it with organic supports, using 0.2 mm layer height with regular PLA. It works perfectly. I’ve attached a Gcode file with organic supports in 0.2 mm.
Wydruk około 6,89 €–8,42 € nettoWstępna wycena jednego wariantu
A simple bit attachment to mix a drink with a drill without making a mess.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena jednego wariantu
A simple wall mount to store and display Viking (or Slavic) drinking horns. Prints easily in one go, no tricks, no supports needed. The bottom is flat enough for adhesion. The screw holes in the default model are 3.2 mm – given the…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Working from home often results in beverages and computer equipment sharing the same desk. This is a perpetually hazardous arrangement (and I speak from experience). This design is for a cup/drink holder that places the beverage below…
Bottle Marker/Cap for Drinks & Beer Youtube Short Information about model maintenance: Due to the considerable administrative effort involved in managing models across different platforms, I have decided to maintain only the original…
DISCLAIMER: I designed the potions for a friend and they wanted a poison apple along side them. I did not design the apple in the pictures I took but if you wish to get the full set you can support creator JAVIBU13 at…
What is it? It's a drinks (beer) carrier that can hold four standard-size cans and/or bottles and can fold down for easy transport, can lock down with magnets. Great for taking beer to parties, sporting events or drinking it alone in a…
UPDATE! - April 2025 I made a little github project page where it will generate the right python script for you and make this super simple. Improved Windows support and Mac support too.…
Missing any good drinking game? Then try this dice! It can be used by itself or with other drinking games. Since the dice is very universal to use with other games for example beer pong. instead of drinking the beer that is in the cup. If…
It is a drinking trough for chickens or hens. Material : PLA Infill: 15% Supports: YES
Description A 9cm (3.54 inches) diameter coaster inspired by the Skull logo of Helldivers II If you enjoy this model please leave a Like or post a Make , also be sure to check my other models . Thank you! About the model: This is a…
Update: added a V2 model that is more stable and is a single part, should print without supports but some overhangs need good cooling or just go a bit slower. holder for the drinkmate fizz infuser with a drip tray. Can use for letting it…
I designed this cup holder to fit in the gap between the couch cushions. on my couch it even fits between the cushion and the arm rest.
- Sits next to you on your couch - Holds a your phone, remote, a drink and snacks - Version 2 coming soon...
The Paralane Can Holder is my minimally designed handy indoor and outdoor beverage buddy. It delivers both aesthetic elegance and reliable grip for your favorite canned drinks. Whether you're at your desk, workshop, boat, or patio—this…
A simple drinks coaster I painted them in Acrylic then gold for the writing. Print Settings Rafts: No Supports: No Resolution: 200 Infill: 10 Filament: 3DQF PLA any Category: 3D Printing
Hope You Like My Selection Of Drinks Brand Coasters, Let Me Know If There Is More You Want Done… Some Will Require ‘Print Thin Walls’ On Due To Intricate Details. Please Share Yours Makes And Remixes Enjoy Printing! If You Message Me With…
Printed on a Creality Hi and K1 Max with CFS upgrade The embossed model if you don't have a multi-colour printer you need to set a pause and change filament. Thank you for downloading my creation :D Please consider following my Youtube…
These were missing from my Lupo, so I borrowed the caps from my friend's Arosa and I based the model from them. I printed these cut in the middle (see image below) in PrusaSlicer, and glued them together with superglue (like Loctite), and…
Another funny sign to add to my growing collection - “Some People Drink Deeply from the Well of Knowledge, Others Just Rinse and Spit”, multi colour print, printed in ZIRO PLA Diamond Blue and Sunlu Matte white PLA. For more funny signs…
I made a set of coasters and a holder for 4 coasters… I used my blank coaster models and cut the OU logo into them 1mm deep. I added Fusion360, .stl, and .3mf files I changed color twice in the parts shown in the picture of the printed…
Introducing the Pirate Coaster Collection by Mihovec Design, where adventure meets design. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the need…
Holds 16 cans of Monster or anything else in the same size can. You will want to mirror each piece to print its opposite side, then cement together (using whatever works for the material you printed it in.) I stuck two of these together…
A drink coaster styled after a vintage 3.5-inch floppy disk, with a main base, separate label insert and removable shutter detail. Glue the label to the base and optionally secure the shutter or leave it removable. Prints in three parts…
I used PLA-CF with 50% infill. Laid on it's back with Tree supports.
Introducing the DNA Coaster Bundle by Mihovec Design, where science meets style. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the need for…
Print at any settings, I just used my default 0.2 Layer Height setting and they come out fine. I'd recommend using a brim or raft just to help it to not peel up.
DrinkOMat is a do-it-yourself project for an automatic bartender. https://drinkomat7.wordpress.com https://github.com/
Use the 5 alphabet rings to identify the drink holder's user/owner. Each ring has the 26 English alphabet letters plus a space. I've included the fusion file for the alphabet ring in case you would like to use a different alphabet or…
This is a simple coaster made to fit over the arm of a living room chair or couch. This version works best with square to semi-square arms. The included .scad file can be modified to match your furniture dimensions. The anti-slip surface…
I needed a quick way to store assembled Profoto Modifiers like soft boxes & strips out of the way. So I used a tension rod, some bungee cords, and this adapter ring I designed. Uses minimal material to provide something to hook onto,…
University of Minnesota, Minneapolis, St. Paul, Goldy, made with a filament swap on an old Ender. I didn't have the correct maroon/gold colors but they look decent in red/gray. No supports needed (obviously), easy print for your office,…
Tell me how I can change this if anything goes wrong
This is a small decorative statue that allows you to pour 6 shots at once. it is a kit and does not require any glue. The assembly is very simple, thus, no video. The models are put into folders based on their colours.
A perfect way to save plastic and money!
Coaster for you to stop spilling stuff on your desk.
I was tired of putting my pieces that are on little square's to dry in the cracks of my drawers. So a quick visit to Tinkercad and made these dry racks for my pieces. To different thicknesses and 7 different sizes. the holes pan out so…
Introducing the Hot Surface Coaster Collection by Mihovec Design, where safety meets design. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the…
Drink of Knowledge - Skull Challis
This model is slightly bigger than the original one and also has cutouts for handles on them. they should fit for most of the glasses and mugs out there. print everything without supports and ideally out of something else than pla. my…
Introducing the Snowflake Coaster Collection by Mihovec Design, where winter magic meets design. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the…
Tiktoker @tecnopasion showed the very interesting Cup Holder of @Martin_au. This is an update, a gadget to use with the parts of the original design but the holder will rest over the table (in my opinion, slightly more secure) All my…
I have wired my wall mounted air conditioner's condensate pump alarm to the Ikea Badring water sensor. This mount allows the wire to come out the top right and also for the Badring to easily be removed so you can change the battery.
This is a 3D-printed drinking game spinner. It features a black circular base with a raised edge, designed to hold a shot glass or a small cup. Attached to the base is a prominent red arrow, which acts as the spinner. The design comes in…
screw cap for drinking glass with straw hole
Dies ist eine verbesserte Version 2: Deckel lässt sich weiter öffnen Deckel wurde verstärkt an den Seiten ist jeweils eine kleine Lasche angebracht, damit sich der Deckel leichter abnehmen lässt Der Deckel rastet auf einer 330ml oder…
Lid for the IKEA Pokal drinking glas. Print with TPU.
Introducing the Explosive Material Hazard Coaster Collection by Mihovec Design. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the need for…
Please see Wheim's original model for a detailed description of the model and its design: https://www.printables.com/model/432213-drinkmate-bottle-dryer-and-wall-storage-solution Also note that this remix is intended to be affixed to the…
Just a simple design because I was fed up with bug taking a swim in my drinks when left unattended. Don't you just hate it when you put your drink down & go off to do something else and when you come back a bug is floating in it. Simply…
A lid for the IKEA POKAL drinking glass. - top diameter 8.5 cm - inner diameter 8 cm - The inner part goes 3 mm into the glass One version with handle and one without handle.
The drink tray from Jabba's Sail Barge. Remixed with increased size and adjusted dimensions to fit on a Droid Depot R-Series astromech like R2-D2. Drink tray tilted forward to allow cups to be level while droid is in drive-mode. Printed…
A cute little drinks coaster perfect for the Halloween spooky season. Just add the colours you want in your slicing software of choice to make the lil guy really stand out! The coaster measures 108mm wide with 2mm on the main face and 3mm…
Printed in ASA. You'll need an assortment of M3 button head bolts. nuts, and washers for assembly
Nothing special here just wanted to protect my new bottles a little and figured I would share the files.
A simple drink holder to stop spills from happening on your couch or chair!
Holders for large and small DrinkMate Bottles (+ their lids) that allow for storage with airflow to allow for drying after hand washing
Simple model of a table foot or drinks coaster. It was originally to stop any spilled liquids being sucked up by the wooden leg. Enjoy!
Protect your favorite bench surface from your favorite beverage with this stylish drink coaster, featuring the RemoteHamRadio company logo. Adhesive rubber feet can be applied to the 13mm diameter holes inset on the bottom. Print Settings…
Otter parents at the beach. support not needed.
Today(6/23) is Asagi's Birthday, so I made a drink coaster of her comic chibi. I printed it with 100% infill, but I'm sure it'll work with less than that. Gonna Finish up the design later, Just wanted to upload the initial version for…
Two small stands that holds the drinkmate half liter (0.5L) bottle upside down to dry, and holds the drinkmate fizz infuser along side it. Heavy version also supports the bottle neck and uses around 55g of filament. The bottle is held a…
Now you can have matching drinking glass tags to go along with your cork puppy! Print Settings Printer: Prusa i3 MK2 Rafts: No Supports: No Resolution: 100 Infill: 20% Notes: Supports for the legs are built into the model with a 0.1mm…
Annoyed of searching your corg drinkcoaster? Print a corg drinkcoaster holder. Perfect for Ikea corg drinkcoaster AVSKILD. 10cm / 4"
This is a LEDRing Lamp for a ring of 24 Neopixels. It consists of a base that takes an ESP32 Devkit V1 MCU and the Neopixel ring and diffusors that are sit on top of the base. Sources for the 3d parts can be found at: LEDRing:…
I have a whole collection of app coasters if you want to check them out. Each colour is on a different layer so you can pause and replace the filament at each colour change when 3D printing. Enjoy :) Category: Kitchen & Dining
Custom coaster with Enviromental Hazard icon/sign. Decorate your home with something special. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the…
In this drinking game version of Mensch ärgere dich nicht , the classic board game is expanded with simple drinking rules. Every player who gets knocked out, every risky move, and special space actions result in shot penalties. This…
Change it up and print with multiple colors. No need for supports.
I added 90 degrees holes between original holes to make soft box tighter. Holes are 3.5mm. If someone needs wider, please write.
Print in place with one color change over at 2mm layer. Easy to print disk allows you to crochet yarn around to make a can koozie. Yarn and step by step how to crochet not included.
Gorilla drinking a cup of coffee.
Merry Sip Cup: Festive Christmas Drinking Cup Bring holiday cheer to your drinks with the Merry Sip Cup! Featuring a vibrant design and the word "CHRISTMAS" beautifully displayed, this cup is perfect for celebrating the season in style.…
Custom coaster with Carcinogen Hazard icon/sign. Decorate your home with something special. Standout Features: 🌟 Customized Radiance: Choose any colour or experiment with dual-color filaments. 🔄 Seamless Assembly: Crafted without the need…
I wanted a cup holder that kept my container so I can't accidently spill it. This is a remix/addon that accomplishes tha
drinkMate 142L Gas Cylinder bottom https://twitter.com/Tiryoh/status/1410950747143823366 Category: Parts
drinks holder for tripod or any thing with a metric 6 x 1 m thread (camera mount)
it a mug you can use it to drink or your pills or your water cup idc what you use it for mabye no hot stuff like hotcoco
It is very sternly but do not put under hot water
America 250 drink tab puller celebrate americas 250 years a drink tab puller/opener for soda, drinks anything with a tab put on your keychain , women dont break a nail until the next one l8tr
Pause the print at the first layer that would cover the magnets (the pause is at the beginning of the layer. so you'll want to see the layer that covers it, like this: 8x3mm magnets are my magnet o choice for most 3d prints. You should be…
