Liczymy pasujące modele…
Zero Clearance insert for DeWalt DWS 780 miter saw. I printed it in PLA+ with 80%+ infill. If you have smaller printer like me (Bambu X1C), insert can be cut in half with Plug connectors (4mm in diameter, 8mm deep). I recommend use 0.20…
Adapts DWS779 miter saw dust port to a 2.5" shop vac Prints ok without supports. The fit on the saw is a tight friction fit to keep it on without any extra support. May also fit other dewalt saws with 42mm outer diameter dust port
-tisknuto z PLA -Dewalt TOUGHSYSTEM 2.0, DWST08330-1
I could not find a hose connector on this site for a specific Shop-Vac hose size and Dewalt Miter Saw Dust collector, so I made one! First model, lets GO! I have the shop-vac hose of 1-7/8" inner dimension at 1.76" for a little more space…
Designed for the Dewalt DWS715 Miter Saw Note: I originally made this out of PLA but definitely recommend PETG to allow more flex to fit vacuum hoses. Customized version of https://www.thingiverse.com/thing:1246651 Created with…
este es mi modelo de colector de polvo basado en Fisher shop el de el es de Bosch el mío es de Dewalt en el frente se ajusta perfecto después de 8 pruebas con corte de laser y no necesita hardware adicional para anclarse de usan las…
This is an adapter for connecting a 35mm vacuum hose to the dust port of Dewalt's DWS774 and DWS773 mitre saws. I have tested it on a DWS774. I am fairly confident that it will also fit the DWS773, as they are extremely similar. I don't…
Connects a shop vac hose to a miter saw dust port. Most likely will fit many other tools like belt sanders, planers, etc
Custom Gridfinity base perfectly fits DeWalt TSTAK Deep Box (DWST17806). Prints in 7 smaller parts to fit smaller printers. Base accepts magnets for extra stability if desired. Stash taller parts in irregular spaces between gridfinity…
Introduction These are even smaller separate bins at ½ and ⅓ the size of the 111 mm x 81 mm bins for the DEWALT DWS14925 organizer. I assume this will work for similar organizers from different brands, but I don't own any to verify that.…
Print Settings Rafts: No Resolution: 0.20 Infill: 100 Filament: esun pla+ pla whatever you like
Will likely work with more DeWalt miter saws than the DWS779 I have, but YMMV. PETG or harder recommended. No supports needed if you print thread side up, but I used a brim for stability. This thread works with many (most?) household…
Replacement part for the hinge between cover and pullbar. This is for the DWST83347-1 This is a weak construction from DeWalt, which broke on mine. Therefore this replacement, which is much stronger. You need to remove the old (broken)…
Gridfinity Magnet Baseplate for DeWALT T-Stack with 2-Shallow Drawers (DWST17804). Designed to fit in the guardrail slots of dividers. It was created with Gridfinity Workbench, which is a FreeCAD addon. Then, I added holes to fit the…
zero tolerance insert for the dws779
My set of useful gadgets for the Makita LS1040 miter saws. Preffered filament ABS (for duarbility). dws520_blade_cover.stl - cover for blade window which helps to dust management Print Settings Printer: V-king Rafts: No Supports: Yes…
Replacement part for the hinge between cover and pullbar. This is for the DWST83347-1 This is a weak construction from DeWalt, which broke on mine. Therefore this replacement, which is much stronger. You need to remove the old (broken)…
Jednoduchý adaptér který se přišroubuje místo originálního průhledného plastu na spodku frézky. S frézkou je pak možné pojíždět po vodící liště, která je součástí příslušenství k ponorné pile DeWALT. Materiál: PETG, ASA Vrstva: 0,2mm…
I couldn't find a reasonable adapter online, so I made this one. It should be printed in place without supports using PETG in the photos. I used 30% hexagonal infill, but less might do. You may be able to increase the miter-side clamping…
These are some Inserts for the Dewalt TSTAK Drawers, they sit inside the drawer sections allowing you to put smaller items in, they have lids as well to stop spillage when you carry the drawers on their side. There are options: - Single…
You'll need 2X inner and 2X outer pieces. Note the inner pieces are NOT the same. One (0.1) is slightly larger. Tested with ABS with 0.4mm nozzle and 0.2mm layer height, worked fine but needed tangs. Finalized with PETG 0.6mm nozzle and…
I couldn’t find an STL to connect my DeWalt DWS780 miter saw to my DeWalt DXV09P shop vac, so I made one. This adapter is designed to improve dust collection and provide a snug fit between the saw and vacuum hose. It was one of my first…
Simple print and slide on model, better feel then factory pin. Textured grip and smoother edges. Great little upgrade for the Dws780 saw.
I liked the original models as they maximized space with straight vertical sides. Needed an extra large bin for tools to accompany the specific organizers. Large full size bin is based off the 'half bin regular' to allow for fitting in…
rangement pour les pannes du DWS 200 de FNIRSI
One of the clips broke off of my original HKZW-DWS01 backing plate, with no replacement available I decided I better design one (I've got plenty more of these things waiting to break during battery replacements). Link to discontinued…
I made a storage system for all my oil paint tubes, brushes, and other supplies to store them inside DEWALT DWST08035. It has 3 layers, each layer consists of two parts, you can print them one by one. You can glue parts or have them…
DWS (POL) Wykonujemy również wizyty domowe ;-) Eine neue Serie von Untersetzern. Mehrfarbiger Druck. Hochdruckverfahren. New Coaster Series DWS (POL) Wykonujemy również wizyty domowe ;-) A new series of coasters. Multi-coloured printing.…
Bigger / Stronger plugs for pouch. Original plugs was too loose for my taste and pouch very often just fall off.
I have a few T-Stack Dewalt Pro 10 Compartments Organizers 2.9" deep DWST14925 (shallow ones) and found Jduzz (@Jduzz_214493) models! Love them! Then I changed the dimensions and adjusted the separators to fit also the 4.5" DWST14825…
A mod for Fnirsi DWS 200 Soldering Station, designed replacement side panels with vents for passive cooling.
You'll need 2X inner and 2X outer pieces. Note the inner pieces are NOT the same. One (0.1) is slightly larger. Tested with ABS with 0.4mm nozzle and 0.2mm layer height, worked fine but needed tangs. Finalized with PETG 0.6mm nozzle and…
These are some Inserts for the Dewalt TSTAK Drawers, they sit inside the drawer sections allowing you to put smaller items in, they have lids as well to stop spillage when you carry the drawers on their side. There are options: - Single…
I couldn’t find an STL to connect my DeWalt DWS780 miter saw to my DeWalt DXV09P shop vac, so I made one. This adapter is designed to improve dust collection and provide a snug fit between the saw and vacuum hose. It was one of my first…
Adapted the Rigid 2.5" to a Dewalt Mitre Saw (DWS715) with a model created in onShape There are two versions, one that requires support (V5) and one that does not (V2) as long as it is printed vertically with the smaller opening on the…
DWS (POL) Wykonujemy również wizyty domowe ;-) Eine neue Serie von Untersetzern. Mehrfarbiger Druck. Tiefdruckverfahren. New Coaster Series DWS (POL) - We also make house calls ;-) A new series of coasters. Multi-coloured printing.…
Ich habe diesen Staubsaugeranschluss entworfen, da dieser an meiner Tauchsäge gefehlt hat. Durch die Nut ist der Anschluss in der Säge beweglich und lässt sich drehen.
I wanted a way to identify my Dewalt small parts organizers by function. To accomplish this, I modelled the front handle insert in Fusion 360 so I could print whatever colour I liked. The original insert can be removed relatively easily…
Dewalt DWST82800-1 48'' Wall Mounting Metal Rail accessories it is great system for storage your tools. I did not find rack for screwdriver, that's why I designed it. Size: 20x10cm. 12 holes for screwdrivers. Printing: 2 walls 15% infill…
This is a replacement dust cover cap designed for the DeWalt DWS520KTR track saw . It fits perfectly in place of the original rubber plug that protects the tool’s internal parts from sawdust, chips, and dust. The model was…
This is a replacement dust cover cap designed for the DeWalt DWS520KTR track saw . It replaces the original plastic part that covers the side opening and keeps sawdust and debris out of the tool’s internal components. The model was…
A simple remix to fit a Dewalt compound mitre saw.
Adapts the 1.5" dust collection output on a DeWalt miter saw to a 2.5" dust collector hose. I printed with PETG, 15% fill, 4 perimeters. Print with support to plate only.
Adapter to connect a 1 3/8" inner diameter house vacuum hose to the DeWalt DWS709 miter saw. Adapter will press fit onto the mater saw, and the hose will press fit onto the adapter.
An adapter to connect a Dewalt DWS715 Miter Saw (42mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose with a 90 degree elbow, created in Fusion 360.
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/1HNoNHAVH2F Category: 3D Printing
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/1HNoNHAVH2F Category: 3D Printing
