P
PrintablesPassforce
Sealant/Silicon Cartridges Cap
Sealant/Silicon Cartridges Cap Print in pla in 0.25mm
- Pobrania
- 808
- Polubienia
- 86
- Ocena
- 4,77
Wyniki wyszukiwania: eala
260 modeli
P
PrintablesAdam Kimmerly
Gasket and Sealant Scraper
In need of some plastic scrapers to remove old gaskets from a motorcycle motor without damaging the mating surfaces, I didn't have any good options around. But, that's an easy problem to solve. I quickly drafted up four versions of a…
- Pobrania
- 584
- Polubienia
- 64
- Ocena
- 5
P
PrintablesTBII78
Pringles Chip Slider Tray Sealable
Large Pringle tray sealable, with flat edge for tray dispensing position and anti rolling. Printed on food safe PLA at 0.20 layer height no infill
- Pobrania
- 576
- Polubienia
- 27
- Ocena
- 5
P
Printables[email protected]
Silicone Caulking / Silicone sealant straightener
1) remove the old silicone 2) clean with, for example, isopropyl alcohol 3) apply silicone and wipe with an 8 mm squeegee in the direction of the slant (so that the silicone gets everywhere without air bubbles) 4) tear off the silicone…
- Pobrania
- 502
- Polubienia
- 67
- Ocena
- 5
P
Printablesdjedje_zr7
Funnel for Tubeless sealant (or inner tube) (presta valve)
To fill inner tube you must remove valve core.
- Pobrania
- 410
- Polubienia
- 51
- Ocena
- 4,8
P
PrintablesPavel Rampas
Silicone Sealant Nozzle
For OpenSCAD you need download threads.scad by Dan Kirshner. https://dkprojects.net/openscad-threads/ https://dkprojects.net/openscad-threads/threads.scad
- Pobrania
- 222
- Polubienia
- 49
- Ocena
- 5
P
PrintablesPieter Koenen
Sealant Scraper Tool - Thumb or Finger Replacement Tool.
Sealant Scraper Tool - Thumb or Finger Replacement Part :) Keep your thumb or fingers free from sticky sealant when you finish it after application. The corners are identical for each provided tool in the range of 9 to 25 mm in diameter…
- Pobrania
- 63
- Polubienia
- 6
- Ocena
- 5
P
PrintablesJenö
Sealant gun adapter
Sealant gun adapter for two component glue
- Pobrania
- 17
- Polubienia
- 0
- Ocena
- 0
P
PrintablesBunker Monkey
Adhesive and Sealant Gun 600ml – Professional Aluminium end piece
I believe this fits most of the guns in the market. front or back.
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPixi2012
Sealant Nozzle Cap - Silicone Cap - Silikon Tube Verschluss
Ich hasse es wenn die kurz benutze Silikon Kartusche beim nächsten Mal ausgetrocknet ist... Somit hier ein Verschluss. Damit es optimal dichtet einfach ein Gummiband vorab auf das Gewinde geben (muss aber nicht sein). Der Verschluss ist…
- Pobrania
- 2310
- Polubienia
- 161
- Ocena
- 4,97
P
PrintablesMikhail Babarinow
Sealant Gun Nozzles
Sometimes in the work you have to apply glue or sealant in a certain way and these devices should help to solve the problem. These nozzle spouts are removable and are consumable. You don't need a lot of time and material to print them.…
- Pobrania
- 2277
- Polubienia
- 399
- Ocena
- 4,85
P
PrintablesBoss_Hoss990
Caulk/Sealant Tube Organizer
Organizer that holds four tubes of standard 48mm OD Caulk/Sealant. Two versions are provided: One that sits on the edge of a shelf, and the other hangs on a wall. Both can be mounted using two #8 screws. Print fits on a standard MK3/MK4…
- Pobrania
- 1517
- Polubienia
- 554
- Ocena
- 5
P
PrintablesMeister Edel
Container - Sealable, Screwable, Scaleable & Strong ! 3 Versions !
Heyhoo Here I have a new Container for you :) Perfect to store away some dry stuff like Coffee or other things! In addition to the obvious, that the container is as well sealed as possible, I also took great care to ensure that it is very…
- Pobrania
- 1114
- Polubienia
- 487
- Ocena
- 5
P
PrintablesBeo666
Linealanschlag für Metalllineale (15mm x 1mm)
Dieser Anschlag ist für Metalllineale mit den Maßen 15mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
- Pobrania
- 1055
- Polubienia
- 414
- Ocena
- 5
P
PrintablesPapaBravo
Sealant Grout Filler Scraper/Removal Tool
Sealant Grout Filler Scraper/Removal Tool A tool based on a similar commercially available sealant removal tool. It can help remove or scrap away silicon rubber sealant, caulk, grout and other fillers. Especially for silicon, you should…
- Pobrania
- 999
- Polubienia
- 96
- Ocena
- 4,9
P
PrintablesHextra
Great Western Trail: New Zealand insert
This is an insert for GWT: New Zealand to assist with getting it tabled efficiently. Given the shallow box height, double-layer player boards, and two map boards, it was a challenge to fit everything inside. Small compromises were made…
- Pobrania
- 927
- Polubienia
- 105
- Ocena
- 4,67
P
PrintablesReferentiel
Silicone sealant straightener
4 Corner : 90° - 16 mm - 10 mm - Radius 16 mm
- Pobrania
- 857
- Polubienia
- 81
- Ocena
- 4,67
P
PrintablesAntipode
Sealant Funnels for Schrader and Presta Valves
Easily top up tubeless bicycle tires with sealant through the valve using these 3D printed funnels. No more spills or blocked syringes! I provide funnels for both Schrader and Presta valves. More info and Fusion and STEP files here.
- Pobrania
- 821
- Polubienia
- 113
- Ocena
- 5
P
PrintablesAztairya
Silicone / Sealant Cartridge Cap Improved
Sealant cartridge cap to conserve your opened cartridges. Fits standard cartridges. Beveled flange and corners for a tighter seal and easier grip. Print upside-down due to the bottom bevel (or sink it into the bed when slicing). Works…
- Pobrania
- 805
- Polubienia
- 73
- Ocena
- 5
P
PrintablesStonXX
Sealant Cartridge Nozzle Cap Remix
Remix der Verschlusskappe für Silikon Kartuschen. Geändert habe ich die Aussenform, welche nun ohne Raft oder Support gedruckt werden kann. Außerdem habe ich den Gewindeansatz konisch gestaltet, da meine Kartuschen am Auslass alle konisch…
- Pobrania
- 731
- Polubienia
- 104
- Ocena
- 4,7
P
Printablesszprusa
Silicone Sealant tube multiple nozzle, nozzle cleaner and cap with FreeCAD (RT) file
Silicone Sealant tube nozzle nozzle cleaner cap with FreeCAD (RT) file. I printed with 5 perimeter and with 0.16 layer height from PLA. Update 2023.12.28: WARNING : not printed and not tested… siloplast_v2.FCStd - can be loaded with stock…
- Pobrania
- 669
- Polubienia
- 70
- Ocena
- 5
P
Printablesdodasch
Presta Valve Tire Sealant Funnel
A small funnel for tire sealant especially for Presta valves (with thread)
- Pobrania
- 575
- Polubienia
- 68
- Ocena
- 4,71
P
Printablesgillis
Sealable Hexagon Box
The box inner size is 90 x 58 x 17 mm Suitable for Standard Playing Cards Or, as you can see in the images, suitable for anything else :-) Print-in-place, when the print is finished the box is ready to be used. You just have to loosen the…
- Pobrania
- 558
- Polubienia
- 142
- Ocena
- 4,83
P
PrintablesJ.S. Prints
Sealable Box with Click Mechanism
Are you looking for a sealable box that won't open if you drop or shake it? Then you have found one!!! This is a box with a click mechanism that you will love to open!!! There are two types of lids, the softer and the harder click lid,…
- Pobrania
- 524
- Polubienia
- 143
- Ocena
- 4,5
P
PrintablesDJMac
Caulk Sealant Tube Wall Mount (Easy Print)
Simple design. No supports needed. Prints as a single piece. Mounts with just 1 (or 2) screws. Fits on Ender 3 bed. Print, mount, done. I know there are numerous mounts for caulk sealant tubes and I just couldn't find one that was a…
- Pobrania
- 473
- Polubienia
- 99
- Ocena
- 5
P
Printablescmh
Bicycle tubeless sealant dipstick
A printable knockoff of a sealant dipstick. Orange Seal used to make these, but don't appear to be on their website anymore. For use with bicycle tubeless systems to check how much sealant is still in the tire without having to dismount…
- Pobrania
- 434
- Polubienia
- 84
- Ocena
- 5
P
PrintablesMiniWorld3D
Auckland Sky Tower - New Zealand
🇳🇿 Nau mai ki Aotearoa Welcome to New Zealand! This model was created by MiniWorld3D collaborator Uddhav Khapre aka @themes_3d The Auckland Sky Tower is a telecommunications and observation tower in Auckland, New Zealand. It is 328 meters…
- Pobrania
- 433
- Polubienia
- 47
- Ocena
- 5
P
PrintablesMiniWorld3D
ChristChurch Cathedral - New Zealand
🇳🇿 Nau mai, haere mai ki Aotearoa New Zealand! Welcome to Aotearoa New Zealand! The ChristChurch Cathedral is an Anglican cathedral in the city of Christchurch, in the South Island of New Zealand. It was built between 1864 and 1904 by the…
- Pobrania
- 416
- Polubienia
- 80
- Ocena
- 5
P
PrintablesCreni
Nozzle cap for sealant cartridge (metal or plastic thread) - Parkside (lidl) o-ring
Useful to keep opened cartridges (silicon, construction adhesive..). You'll need an o-ring (inner diameter: 20mm, diameter 3.55mm) to ensure a tight fit. I found mine in a parkside o-rings box. I printed my caps in PETG (0.2 layer height)…
- Pobrania
- 407
- Polubienia
- 75
- Ocena
- 5
P
PrintablesBeo666
Linealanschlag für Metalllineale (19mm x 1mm)
Dieser Anschlag ist für Metalllineale mit den Maßen 19mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
- Pobrania
- 384
- Polubienia
- 112
- Ocena
- 5
P
PrintablesNir Ovadia
Sealant Silicon nozzle cleaner
Tool to clean the reminder of sealant from the tube's nozzle
- Pobrania
- 376
- Polubienia
- 45
- Ocena
- 4,67
P
PrintablesInku
Resealable Booster for a MTG Draft
Designed for Sleeved Standard American Cards like Magic: the Gathering or Pokémon/Flesh and Blood. Holds 15 double-sleeved cards. Similar to Cardamajigs Cubeamajigs, this one is 3D printable in different sizes. Standard one has a double…
- Pobrania
- 355
- Polubienia
- 53
- Ocena
- 4
P
PrintablesFrozenBubble
Silicone sealant corner smoothing tool
Simple! it's all in the summary. Print with TPU for maximum durability.
- Pobrania
- 349
- Polubienia
- 59
- Ocena
- 5
P
PrintablesOndřej Stříteský
Mt. Taranaki (New Zealand) - 3D puzzle
The source model was created at http://jthatch.com/Terrain2STL/ , so you can create your own! Read how to create puzzles: https://blog.prusaprinters.org/print-your-own-3d-puzzles/ Print instructions Check the first layer. If the first…
- Pobrania
- 326
- Polubienia
- 114
- Ocena
- 5
P
Printablesgillis
Sealable Box With Many Different Compartments
This model is for bed size 210x210 Do not scale down the model because the hinges will not work! If you have a Prusa Mini then visit this page instead https://www.printables.com/model/237266-box-print-in-place The Model is Print-in-place.…
- Pobrania
- 323
- Polubienia
- 60
- Ocena
- 4
P
PrintablesAndi Make-it
Silicon Cap for Sealant ring 20x3.5
Remix for this dimension of O-Ring
- Pobrania
- 314
- Polubienia
- 35
- Ocena
- 5
P
PrintablesTD3D
Linealanschlag, marking gauge, woodworking
Das verwendete Lineal hat eine Größe von 25,8x0,82mm, es sind auch noch weitere Größen zum Download verfügbar. Gerne werde ich auch auf Anfrage noch weitere Größen anbieten. Der Drucker sollte kalibriert sein, um eine genaue Passform zu…
- Pobrania
- 301
- Polubienia
- 51
- Ocena
- 5
P
PrintablesBeo666
Linealanschlag für Metalllineale (30mm x 1mm)
Dieser Anschlag ist für Metalllineale mit den Maßen 30mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
- Pobrania
- 274
- Polubienia
- 62
- Ocena
- 5
P
PrintablesMiniWorld3D
Aotearoa New Zealand - Topographic Map
Nau mai, haere mai ki Aotearoa New Zealand! Welcome to Aotearoa New Zealand! This is a rather simple model, based on an existing one with a few additions. The source is on Thingiverse by Suptommy9011, the resolution is not mind-blowing…
- Pobrania
- 272
- Polubienia
- 44
- Ocena
- 5
P
Printableszbzzn
Sika Sealant Nozzle (configurable)
A nozzle that fits Sika containers (not the regular silicone ones!) You can configure the nozzle length and diameter in the link below…
- Pobrania
- 263
- Polubienia
- 19
- Ocena
- 4
P
PrintablesTheSteamingHeap
Caulking/Sealant cartridge Nuts - Large and Small
Two sized nuts to seal the common caulking/sealant tubes used in building, renovation, DIY etc. They should stop the contents curing. I've found that disconnecting the applicator and allowing the sealant to cure in the applicator makes it…
- Pobrania
- 256
- Polubienia
- 11
- Ocena
- 5
P
PrintablesLabrat
3.5" HDD shock absorbing sealable box
6x M3x25mm screws are required for assembly. Print inlays and ring seal in TPU . The seal is best printed in 100% infill - concentric. For the inlays, use 2-4 walls and no more than 0.8 mm top surface thickness. Use 5-8% infill for harder…
- Pobrania
- 245
- Polubienia
- 54
- Ocena
- 5
P
PrintablesBeo666
Linealanschlag für Metalllineale (26mm x 1mm)
Dieser Anschlag ist für Metalllineale mit den Maßen 26mm x 1mm (Breite / Dicke) konstruiert. Er lässt sich problemlos drucken, keine Stützen etc. Es wird auch kein zusätzliches Zubehör benötigt. Weitere Größen sind unter meinem Profil zu…
- Pobrania
- 223
- Polubienia
- 41
- Ocena
- 5
P
PrintablesTom
3D terrain model of New Zealand
This was created from the LINZ 8m DEM data in QGIS. The model uploaded here is a placeholder (so don't print it as it will be very thin and have poor detail), as the thirty eight 200x200mm STL's used to create my 2.2 meter print are 340mb…
- Pobrania
- 219
- Polubienia
- 24
- Ocena
- 0
P
PrintablesMarobi1958
Simple sealable box (study object)
This is a study object in Fusion 360. Fully parameterized
- Pobrania
- 206
- Polubienia
- 24
- Ocena
- 4
P
Printablesian123411
silicon sealant/mastic tube holder
i made this silicon tube holder so that they are easy to find i printed it at a 0.2 layer height with 12% infill and with PET-G you just need 2 x 35mm screws to attach to shed ect.. if attaching to brick work longer screws may be required…
- Pobrania
- 205
- Polubienia
- 19
- Ocena
- 5
P
PrintablesTheMightyHaddock
Spray can Sealant holder
Wall hanger for sealant tubes and spray cans. I screwed mine to a 1x4" which i then attached to the wall.
- Pobrania
- 201
- Polubienia
- 38
- Ocena
- 3,5
P
PrintablesKulhys
Čistič spičky kartuše silikonu/ Nozzle Cleaning Tool for Silicone Sealant
Čistič špičky kartuše silikonu
- Pobrania
- 198
- Polubienia
- 13
- Ocena
- 0
P
PrintablesMearcat
7 Pin Flat Trailer Plug dust cover (Australia/New Zealand)
Simple dust cover for Australian / New Zealand flat 7 pin trailer plug. Limits dust & moisture getting on the pins, however I also added some dielectric grease in the holes to prevent corrosion also. Remixed from…
- Pobrania
- 194
- Polubienia
- 14
- Ocena
- 5
P
PrintablesLeandro Duarte
Silicone Sealant Wall Holder
English: A practical wall-mounted holder accommodating up to five silicone tubes. Perfect for workshops, garages, kitchens, or any area requiring streamlined organization! This holder is meticulously designed for convenient and neat…
- Pobrania
- 164
- Polubienia
- 23
- Ocena
- 5
P
PrintablesAdrian
short sealant nozzle
short nozzle = less waste Category: Hand Tools
- Pobrania
- 152
- Polubienia
- 17
- Ocena
- 4,25
P
Printablesfloano
Cap for sealant and adhesive cartridges
Needed a sealant cap without o-ring. Seals by having in internal cone that wedges securely into the cut hole in the cartridge. Print with flat top down.
- Pobrania
- 139
- Polubienia
- 11
- Ocena
- 5
P
Printablesstrojaři světce
Key chain sealable box
Key chain sealable box with a dino
- Pobrania
- 127
- Polubienia
- 23
- Ocena
- 0
P
PrintablesXavier Faraudo
Solid/holed sealable holder - OpenSCAD parametric
Features Fully parametric round or n-gonal container. Walls and cover top can be either solid, with square holes, or with straight triangle holes. Can add an inner "brim" or "overhang", which in turn allows the use of a flexible sealing…
- Pobrania
- 127
- Polubienia
- 30
- Ocena
- 0
P
PrintablesDany Sánchez
New Zealand - Flag Beer Coaster
🌿 AOTEAROA 🇳🇿 If you are Kiwi, a vexillologist, have international friends, or simply don't know what to do with your color filaments, this Flag Coasters collection is for you! This is not the actual flag of New Zealand, but a common…
- Pobrania
- 123
- Polubienia
- 29
- Ocena
- 4,5
P
PrintablesRico
Ruler stop for steel ruler / Linealanschlag für Stahlmaßstab (25mm)
First, this thing is inspired by https://www.youtube.com/watch?v=L-TO0nui0pc&t = use some sandpaper to finish perhaps you have to scrape some ABS with a knife at the recess for a tight fit cut a M5 thread in the hole at the part without…
- Pobrania
- 118
- Polubienia
- 18
- Ocena
- 0
P
PrintablesClive Harris
New Zealand Tiki
New Zealand style Tiki ,usually made of Kauri with paua eye inserts Category: Sculptures
- Pobrania
- 116
- Polubienia
- 13
- Ocena
- 0
P
Printablesmarcoturconi
Great Western Trail: New Zealand - player tray "You Can Leave Your Hat On"
This is a mod for the great "Great Western Trail: New Zealand insert" by Hextra_355848
- Pobrania
- 110
- Polubienia
- 7
- Ocena
- 0
P
PrintablesZarken
Christchurch Central City - New Zealand 3D Model
Hi there. Here is my model of Christchurch, New Zealand's central city, encompassing the heart of the central business district and showing some of its key features. Model was created by exporting the 2020 1m DSM dataset from LINZ to QGIS…
- Pobrania
- 106
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMiniWorld3D
Embassy Theatre - Wellington, New Zealand
🇳🇿 Nau mai, haere mai ki Aotearoa New Zealand! Welcome to Aotearoa New Zealand! The Embassy Theatre is a cinema in Wellington, New Zealand. Originally built in 1924, it has undergone a series of remodelings and changes in ownership…
- Pobrania
- 92
- Polubienia
- 34
- Ocena
- 0
P
Printablesvas__design
Sealant tube storage rack
4x4 silicone/sealant storage rack for storing 50mm OD tubes upright
- Pobrania
- 91
- Polubienia
- 13
- Ocena
- 5
P
PrintablesSacapuces
Great Western Trail New Zealand Insert
I wasn't really satisfied with the existing insert or available options so I made my own Advantages : fast setup time meeple can keep it's hat individual trays story everything for a player A/B tiles can stay in their bag solo components…
- Pobrania
- 91
- Polubienia
- 8
- Ocena
- 0
P
Printablesmuddymaker
Sealable Storage Capsule
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker Bottom internal dimensions are-H 176mm, W 94mm. Underside of…
- Pobrania
- 90
- Polubienia
- 15
- Ocena
- 0
P
Printablessjpiper145
Power Point Cord & Socket Organiser (Australia, New Zealand, Fiji, Tonga, Solomon Islands, and Papua New Guinea sockets)
Created out of a hate of trying to fish power cords from behind the washing machine and dryer. I've made the socket hole not a snug fit so I could put blu-tack in behind it to hold it in place. Enjoy! Category: Household Supplies
- Pobrania
- 88
- Polubienia
- 24
- Ocena
- 0
P
PrintablesUntangleWORKS
Presta Valve tyre sealant tool
I had found a nice tyre sealant applicator but it was missing the feature to place the sealant in side the tyre with out placing a lot around the treats of the valve. so I made one. there is 1 edition with a cap for storage and…
- Pobrania
- 88
- Polubienia
- 24
- Ocena
- 5
Green Glue Noiseproofing Sealant Nozzle
A better nozzle to use with Green Glue sealant. The included nozzle doesn't thread well and tends to come loose.
- Pobrania
- 87
- Polubienia
- 10
- Ocena
- 0
P
Printablesryan_be
silicone sealant applicator
Silicone sealant applicator designed to get clean corners when sealing sinks baths etc. Model in fusion 360 it has a 5mm, 10mm and 20mm curve. This has been test printed using polymaker PolyFlex™ TPU95 at 15% infill You can see the full…
- Pobrania
- 84
- Polubienia
- 7
- Ocena
- 5
P
PrintablesSkyRider
Draw tile trays for Great Western Trail: New Zealand
Hextra's design for an insert for Great Western Trail: New Zealand ( https://www.printables.com/model/556982-great-western-trail-new-zealand-insert ) is superb, but I had trouble scrunching up the bags of tiles into the gaps between…
- Pobrania
- 80
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLittleTaniwha
New Zealand Stencil
This is a stencil for the country New Zealand, this stencil includes an outline of New Zealand, the name of New Zealand, and the Southern Cross, which appears on the flag of New Zealand.
- Pobrania
- 77
- Polubienia
- 15
- Ocena
- 5
P
Printablesgrokbeer
New Zealand Map Puzzle
A fun and decorative puzzle of the three islands of New Zealand. Instructions Arrange and print all the individual pieces or use the plates provided. I haven't tested printing the complete North or South Islands (or the country as a…
- Pobrania
- 75
- Polubienia
- 15
- Ocena
- 4
P
PrintablesTheBoatbuilder
Angled Sealant Nozzle 25mm Thread
My builder needed an angled (45 degree) nozzle to apply sealant up into a roof capping. The thread is 25mm so a new nozzle was required.
- Pobrania
- 74
- Polubienia
- 3
- Ocena
- 0
P
PrintablesZwart_21
Ventilation Pipe Mount IKEALack Enclosure 80mm Fan
This is my first ever Upload of a Model so if something is wrong/false, I'm open for feedback :) Printed on MK3s+ with Prusament Silver PLA This 90° Angled Mount is used to connect a Ventilation Pipe to your IKEA LACK Enclosure. Its…
- Pobrania
- 72
- Polubienia
- 13
- Ocena
- 0
P
PrintablesWackyWary
Mini cap for sealant
A minimalistic cap for standard silicone cartridge with S15 x 2.5 thread.
- Pobrania
- 72
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGBlades
Sealant Cartridge Cap O-Ring
The sealant cartridge nozzle cap at https://www.thingiverse.com/thing:3375441 is designed to be used with an o-ring. This is an alternative which can be printed in TPU Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
- Pobrania
- 71
- Polubienia
- 7
- Ocena
- 0
P
PrintablesKeen
Vacuum cleaner adapter for resealable bags
A simple way to remove excess air from resealable bags. Modified the design from onshape by Vincent Schouten, changed dimensions to suit our Dyson, and added a lip to prevent the bowden tube from getting sucked in.
- Pobrania
- 71
- Polubienia
- 15
- Ocena
- 0
P
PrintablesZarken
Christchurch City Model - New Zealand
Hi there. I am uploading my model of Christchurch's Central City, the STL was generated by exporting the 1m DSM data for the city from LINZ's 2021 Lidar Survey into QGIS to be converted to an STL. I made the border quite large to…
- Pobrania
- 71
- Polubienia
- 9
- Ocena
- 0
P
PrintablesMZ4250
Eala
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
- Pobrania
- 70
- Polubienia
- 16
- Ocena
- 0
P
PrintablesSponge
Sealant Nozzle Short 1mm
Remix Short nozzle 1mm Hole Use a Drill to make it bigger :-) Print Settings Printer: Craftbot Plus Rafts: Yes Supports: No Resolution: 0.2 Infill: 30 Filament: No Name PLA White Category: Tools
- Pobrania
- 69
- Polubienia
- 5
- Ocena
- 5
P
PrintablesMasibu
Sealant Tube Rack
A simple Sealant / Caulk Tube Rack for mouting Vertically on the side of a cabinet or Horizontally under a shelf. Holds 3 tubes. Mounts with M5 countersunk wood screws. Only existing designs I could find were abominations to 3d printing…
- Pobrania
- 68
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMadiba
Keychain Lomu #11 New Zealand All Blacks
Nice Keychain to remeber the greatest rugby player. KIA ORA!
- Pobrania
- 67
- Polubienia
- 12
- Ocena
- 0
P
PrintablesZDeanzo
Silicone Sealant Tube Holder
A Stand for Silicone Sealant/Caulk Tubes. I have tried several different brands and they did all fit, with varying amounts of snugness.\ There is both a flat stand, as well as a wall mountable backed version. Print Settings Printer Brand:…
- Pobrania
- 67
- Polubienia
- 4
- Ocena
- 0
P
PrintablesChris
Tire Sealant Funnel
Two funnels, the 1.5oz version works in almost all wheel set ups. The larger 2oz+ works in wheels with low spoke counts. Save the locknut on a presta valve inner tube to glue into the small end of the funnel to thread onto the presta…
- Pobrania
- 62
- Polubienia
- 5
- Ocena
- 5
P
PrintablesMarcoz
Sealing cap sealant gun
This sealing cap will close your sealing gun from air, so it will not dry out. I prefer PETG, so it then closes properly.
- Pobrania
- 62
- Polubienia
- 6
- Ocena
- 5
P
Printablesk scale models
T50 turret for M113 Australian and new Zealand
This is a set of M113 t-50 turrets for the Tamiya 1/35 M113. there are parts to make the Australian and New Zealand. Each turret needs 3 lifting eyes but make more, they tend to make good feeding for the carpet monster. the Australian…
- Pobrania
- 59
- Polubienia
- 5
- Ocena
- 0
P
PrintablesAdam Oellermann
Silicone Sealant Bead Former
This simple model allows for attractive silicone beads to be formed easily and without mess. This former currently produces straight beads (triangular cross section), which work really well and look good. I plan on adding radiused formers…
- Pobrania
- 59
- Polubienia
- 5
- Ocena
- 0
P
PrintablesWetdesign
Tube cap for Starbrite Silicon Sealant
Made it for my own need, saving marine silicon sealant for the next time. The pipe was to set a nicer string of silicon around a window. The threads might match other tubes too, like Abbas caviar and mustard tubes. Let us know where it…
- Pobrania
- 57
- Polubienia
- 2
- Ocena
- 0
P
PrintablesWise_Man
Magical Sealable Box
Wonderful Idea!! Since the box and lid are in close contact, even if you put liquid in the box and put the lid on, the liquid inside will not spill out. Try it !!!XD
- Pobrania
- 55
- Polubienia
- 12
- Ocena
- 5
P
Printablestaeraeyttaejae
Rubber boat valve cover and sealant
Modeled in fusion 360, not yet printed. Print the valve in PETG / ABS / PC or something similar with good layer adhesion for strenght. Print the valve in flex material, i will try china TPU when i have a slot in my queue :) Category:…
- Pobrania
- 54
- Polubienia
- 4
- Ocena
- 0
P
PrintablesFotrLuk
IKEALACK_magnet_door_knob
Printer: MK3S Material: PETG Time: 50min Infill: 15% Quality: 0.15mm Quality
- Pobrania
- 52
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPixelCrafter
Mini Bag Clamp – 3D Printable Resealable Clamp
This 3D printable mini bag clip is perfect for sealing snack bags, coffee packs, and other food packages to maintain freshness. Its compact and sturdy design ensures a secure grip, preventing spills and keeping contents airtight. Easy to…
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesNaitsabes
Sealable/closable container / Zamykany/zasuwany pojemnik
A container with a lid or sliding cover—for example, for small screws, bolts, or anything else. / Zamykany/zasuwany pojemnik np na drobne śrubki, wkręty co kolwiek
- Pobrania
- 50
- Polubienia
- 9
- Ocena
- 0
P
PrintablesJeffJ22
Caulk / Sealant Organizer (Multiple)
Organizer to hold up to three tubes of caulk / sealant. You can print two of the ends and space them how you want or print the full version that has a brace between them. Both versions have holes for screws and can be mounted on the wall,…
- Pobrania
- 49
- Polubienia
- 15
- Ocena
- 5
P
PrintablesDamian Breza
Corner sealant nozzle 90°
0.4 nozzle, 0.2 leyer PLA or PETG Screwed to the tube.
- Pobrania
- 49
- Polubienia
- 6
- Ocena
- 0
P
Printablestark
Tubeless Sealant Funnel with Recess for Valve Lock Ring
Print the funnel using a brim. Once printed, glue a presta valve lock ring into the top of the funnel. Markers on funnel at 10ml increments. For best results use clear filament and add color changes for each marker to easily see while…
- Pobrania
- 47
- Polubienia
- 3
- Ocena
- 5
P
PrintablesLS001
Sealable Containers in Various Sizes
Render of the variants A-D060L040/B-D060L045 (left) and A-D120L200/B-D120L200 (right) Variants Currently the model is available in four different diameters. (60mm, 80mm, 100mm, 120mm). with various lengths for both halves of the…
- Pobrania
- 47
- Polubienia
- 1
- Ocena
- 0
P
PrintablesStonXX
Sealant Cartridge Nozzle Cap / TPU Version
Remix der Verschlusskappe für Silikon Kartuschen mit integriertem Dichtring. Muss daher mit TPU gedruckt werden, sonst wird es nicht flexibel genug werden zum Abdichten. Remix of the cap for silicone cartridges with integrated sealing…
- Pobrania
- 42
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMr Robot
Atari 8-Bit 1088XEL Realan Case Panels
The 1088XEL is a mini ITX sized Atari 8-Bit, the 'standard' case for it is a Realan 80mm mini itx case, these panels are usually designed by the user in panel designer software and made from Aluminium. I converted the design files to STL…
- Pobrania
- 42
- Polubienia
- 2
- Ocena
- 0
P
PrintablesErik Stensmo
Sealant cartridge nozzle
Note: Print standing up on the printers finest resolution, since the threads are fine and tolerances are tight. I recommend printing the STEP file and not the STL. A nozzle for 310 ml/0.1 gallon sealant cartridges that actually fits. The…
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLittleTaniwha
Articulated New Zealand
This is an articulating outline of the country New Zealand.
- Pobrania
- 41
- Polubienia
- 6
- Ocena
- 0