Liczymy pasujące modele…
A cute little gecko with a flexible body and tail! Unlike the dachshund , this one prints faster and it needs no supports, while still being super fun to play with. Prints in PLA with no problems, but I assume PETG should give the gecko…
This 3D model is a gift for everyone. In return, I ask only that you mention me. However, some users on this site appropriate other people's 3D models, pass them off as their own, and restrict the license. Please report such people to the…
This is an easy to print and strong deck box that fits 100+ sleeved cards. Made for Magic The Gathering commander decks but these could easily be used for anything else. Print each half in different colours to mix and match designs. The…
Just took delivery of my new Steamdeck and decided to design a storage tray to easily store your USB-C charger and MicroSD cards in the cavity on the bottom of the official Steamdeck carrying case that comes with the Steamdeck. The design…
Remix of version V2.1 by Simon with 10 instead of 5 slots. Fits square lids with a length of 15 cm or rectangular lids with a length of 21 cm (upright) Printed using PETG | 30% infill | no supports required
The lovely 🥰 TurtleNeck filament buffer is somehow missing internal cable management and any protection 🫢 for the Omrons' pins. But no worries, that's now solved 😉. And while extending the frame and lid for improved cable management and…
Made this stencil to create a checklist on a post-it (or sticky) note pad. The stencil surrounds the notepad to prevent it from sliding around, and can also be used as a base to go underneath for safe keeping.
You have the snappy TurtleNeck PLUS so you can easily take it on and off your printer or beloved 🥰 BoxTurtle ? And of course you are looking for a nice and clean solution to manage the cable and keep the PTFE tube where 👉 you want it?…
NOTE: This was designed for the charger that comes with the Steamdeck LCD. The charger that comes with the Steamdeck OLED is longer and may not work with this accessory! Not so much a remix but a reimagined insert for the back of the…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
Join here to get access: https://www.patreon.com/kogi3d Articulated Print-in-Place Mini Gecko This fully articulated mini gecko prints in place and loves to hold onto anything it can grab. Cute, flexible, and weirdly satisfying to play…
Commercial Use and Attribution Notice Alley Chat TD1 © 2024 by Majestic AV, LLC. is licensed under CC BY-SA 4.0 . Commercial use of this design, including promotional use, selling, and reselling to other businesses for sale, is permitted…
UPDATE 12.12.2023 New Version 3.0 replaces all the other variants. The new version supports all types of Steam deck cases ( with tab, no tab, wider, smaller, etc) and can be individually adjusted to the the right size no matter the…
Have you ever had a pain in your neck or back after a working day spent in front of a laptop? I had… Two pieces of plastic made my workplace much more comfortable and convenient. And Mr Neck is happy now. Try and let me know your…
Description While I was lucky and received my Steam Deck quite early, there was one major problem: I wanted to play the Deck in tabletop mode like a Nintendo Switch. Because of this I created a detachable stand that allows my friends and…
MTG Commander Deck Box 100+ sleeved cards. Default inner dimensions are: width 70, depth 65, height 93 mm but all can be adjusted. Parametrized Fusion360 file for easy adjustment included. MTG deck box for 100+ sleeved cards. Heavily…
This is the 3D-Model notebookcheck uses to test and review FDM(FFF) 3D Printers. With a base of only 66 mm x 66 mm, it can be used to find multiple quality issues. Integrated are tests for the build plate adhesion, extruder accuracy,…
U-CHAIN Necklace with locker It is an original print-in-place necklace chain model which includes a locker mechanism. I was able to print it on both PLA and PETG with no support material or brim and 100% infill. I'm using the above model…
Stackable deck boxes for Magic the Gathering, including: Commander deck box with a window to display your decks commander (or another card of your choice. Space for 100 card deck and 25 card side-deck (with sleeves) Standard deck box with…
This medal holder is perfect for large medals up to 100mm in diameter. Its unique hexagonal structure provides a sturdy and elegant display for your medals. The holder is made up of three parts - a hexagonal base, a medal insert, and a…
Have fun :) Both Versions 3 Wände / 3 Walls 15Infill Bambu also 2 Colors or other Printers with Break :) Regards
Heyho Ich glaube mein Schwein pfeift :) (German) my daughter had a beautiful ocarina made of clay. Unfortunately, this had fallen down and shattered into 1000 pieces :( So since she was very sad I downloaded and printed a simple one. But…
Meet our incredibly cute and realistic Flexi Leopard Gecko model! 🦎✨ With lifelike details and a flexible design, this charming little gecko is perfect for reptile enthusiasts and 3D printing fans. It's a delightful addition to any…
TL;DR: Model B “Recommended” is the most aesthetically pleasing, Model C “Minimalist” is the smallest and fastest to print and will fit better in a pouch/case/bag. The purple one on the main picture is Model B, the light blue one is Model…
A cool checklist / to do list in which you can insert paper and close the cover to secure! The model is print in place and comes off the bed with moving sliders and hinges. Comes in three variants, normal, one for hanging e.g. on a wall…
I liked the remix from ANBAL534 ( https://www.printables.com/model/207028-steam-deck-carrying-case-insert-for-eu-plugs-europ) but missed the option to use the case as a stand as well. Besides that I don't use full SD cards, I opted in…
I made a small stand for my Steam Deck, as the available ones are way too big for my taste (and printer).
Designed for Printables Flash Contest #101, this finger skateboard I designed features real rolling wheels to give you that tactile feeling. Tried my best to design it without need for supports, but the wheels that do not contact the…
(the other popular STL site is completely broken, so I'm using PrusaPrinters as a backup) "I created the deck for my own use, a few weeks before I started streaming. After fiddling with OBS for a few days I knew that a hardware device for…
With this modern, minimalist organizer, you can neatly store earrings, necklaces, and rings all in one place ✨💍. The design offers plenty of room for your elegant collection. The model is printed in two parts (easy to assemble) and has…
Build instructions are identical to the original Rugged Box using same hardware. -Insert M3 bolts through bigger holes(outer) and thread into smaller holes(inner). -Latches are a single object. Use cut tool in slicer to separate them and…
Are you bad at building decks? Well this is the deck box for you! As your personal statement on the quality of the deck within, this deck box is a modular container capable of holding up to 110 double sleeved standard sized trading cards…
I took the Gecko from WebmasterZero on Thingiverse and painted it in Prusaslicer to print in multicolor. In the files you will find two 3mf files with the two versions from the photos. Just choose your printer with your perimeters in…
A Benchy lost at sea! This time we can blame JAWS . Pesky shark! The crew was rescued thankfully by another Benchy. I'd suggest using blue filament for the sea and then whatever you'd like for the broken hull. I used dark grey. I did not…
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Update There is a bigger version of this box with adjusted tolerances now! (As many comments suggested) You will get the more spacious version if you print every stl with a "+". I'd recommend printing the + version if you intend to double…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
2 in 1 Functional Guitar Neck Rest. Curved design that hugs the back of the neck for the perfect fit. Suitable for most guitars, basses, ukulele, mandolin, banjo and more. Two height design that can suit different instruments Recommended…
This insert allows you to store the Steam Deck OLED charger (US plug style) in the back of your Steam Deck case. I didn't include any SD card storage, feel free to remix and add if you need those or when I get less lazy, I'll add some.…
This is a super easy Step-by-Step guide and model set for making your own custom QR Codes using only a single color of filament. While you can still use a different color at the last 2-3 layers if your printer supports that, it is…
Print settings: (Updated 28.07.25) material: PETG Use 4x wall perimeters/layers Use 4x Top/bottom layers … but → Modify for ZERO bottom layers - print it open on the bottom! Fluid in the inside can flow out. Supports for ventile area -…
After seeing Neebick's genius addition of a stand into JordanK's Steamdeck USB-C Charger Cradle, I went about reimplementing my slightly larger tweak to that version. Once again, it is about 3mm taller to make it easier to get all of the…
Found this model on thingiverse and did not found it here so to promote or attribute this artist here is the link to the original file https://www.thingiverse.com/thing:4871206
The world’s most versatile mounting solution for portable gaming Check out more files for download under my profile here: https://www.printables.com/@get_mechanism_282287/models Want a stronger/more official solution? We also offer…
Recommended Settings. no supports PLA (must be dry!) 0.2 millimeter layer height 2mm brim or raft 0.1mm Z-Hop + retraction Slow speed 210C Nozzle 60C Bed Infill 50%+ 2 thick walls, or up to 4 walls if scaled-up 4 tops/bottoms Illustration…
A set of floral jewelry. Available with mounting hole at the top of the blossom or included in one of the petals. You can choose from 4 daisy sizes. Dimensions Thickness: petals are 1 mm and 1.5 mm thick the middle is 1.5 mm thick → The…
Simple display stand or play cradle for the Steam Deck print should not need supports and will be able printable in any layer thickness you may want. Its big and may not print on all printers. You may not be able to print on a MK3s or…
Pre-cut for printing without support or in one piece.
Beschreibung Ich habe ein Hybrid Modell erstellt nachdem es bereits den einen oder anden Dosen- und Flaschenverschluss gab habe ich die beiden kombiniert. (der Dosenverschluss kann auch zum Öffnen genommen werden. Drucken kann man ihn aus…
The box holds a standard 60 card Pokemon deck, without card sleeves. The lid snaps onto the top and should hold on during normal use but is still easy to remove. It has a ledge inside to prevent the lid from being pushed down too hard and…
A new 3D figurine generated by AI, a gecko. Do not forget to LIKE, to download and to upload your makes, thanks ! Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Use these brackets to securely slot your Steam Deck into the Ikea Skådis pegboard system. For a few reasons mentioned in my Secure Clip System template I opted to design this method for securely locking things (such as my precious Steam…
Hier könnt ihr euch Print in Place Deckel für eure Bierflaschen drucken. Gedruckt werden können sie aus PLA Material mit min. 2 Wandlinien, 0,2mm Layerhöhe und 15% infill. Es gibt nach Rückfragen nun auch eine Schweizer Variante welche…
My take at a dock/display stand for the Steam Deck. The back logo is intended for adhesive rubber cut in shaped of the logo for added grip but that has proved unnecessary with testing. I have included the logo to be printed as an insert…
Bambu Lab Printer X-Y Squareness Check Adaptors to be used with Kent set squares. I will Add more detail when I have time. After any adjustments always run a full calibration. The following is to be preformed after following the Bambu Lab…
NEW DESIGN: https://www.printables.com/model/264994-brembo-brake-disc-v2 Just a Brembo Brake design. It had textures too but Fusion didn't let me export the textured file. Please comment if you have printed it and let me know for any…
A deck box based on a design that I saw a few years ago but could never find it again. It's a simple deck box with no extra parts required and with the dovetail style lid, no disgusting plastic on plastic noise other deck boxes have.…
I made this model, because i couldnt find any deckbox that fits all my needs, and thought id share it with you all. It holds 100+ sealable doublesleeved cards, with a seperate room for tokens, i believe itll hold about 20 sleeved tokens.…
Check out my new larger version as well ! A simple model of a chain/necklace. Probably helps to use a gluestick/majigoo/nano polymer adhesive and dry filament. I used mostly default settings, .20 layer height, no brim, no supports Small…
I wasn't happy with the other Onewheel prints out there because they were way too big for my hands. I scaled this one to use ¾" grip tape that I had laying around. The wheel will loosen up over time. Added another STL with a smaller wheel…
Thanos necklace on anything you want
Boxes to store a deck (60 cards), with magnets to hold it close. Types: Poké Ball Great Ball Ultra Ball Master Ball Bonus, if you need one more: print the normal Poké Ball model in white-red-white to get a Premier Ball I liked the idea by…
Hi this is a cute longneck dinosaur which is made in low-poly. Supports are needed, i used organic. This model is remix of @MBoartist dinosaur.
Update 21.12.2024 Ich habe das Design (Sockel-05) überarbeitet und - auf Anfrage von Usern - eine Version mit senkrechter Steckeraufnahme (Sockel-05-90) hinzugefügt. Die wichtigste Änderung ist wohl die, daß das Teil nun aufrecht auf dem…
english First of all: I appreciate every like and every rating. A small box with a hinged lid. It is suitable for medium sizes. As in my small box (…
UPDATE17.01.2022 Found another Template including front, back and top. Its only a PDF so its not simply ready to print or cut out, but I thought I add it as it could be useful to some of you. !!WARNING!! if you plan to do this with a…
Make your game easier to get to the table with these modular, stackable card deck holders! - Magnets on sides and top enables N^4 combinations where N = number of card trays - Removable display section allows for vertical and horizontal…
Introducing the indominable Tallneck from Horizon Zero Dawn! This machine is to scale with the official board game and stands on an incredible 150mm base. It has been split into many easily printed parts that come together without any…
keychain for your needs. Cut Down if need be. 4mm base and 0.8 color change (0.2 layers = 4 layers) 35mm x 27mm 6mm Keyring hole
Print instructions Supports are not necessary. I printed it in 0.2mm resolution and 15% infill with PETG
Dolphin necklace A nice little gift which takes less than 30 minuets to print. Uses less than 1g of filament The model is small so unless a printer is set up perfectly stringing can be present. Some time and care after printing may be…
Geralt's Necklace inspired by the Netflix TV series. I tried to achieve the highest accuracy according to the original. Size again estimate (V2 has an inscription on the back) Print instructions I recommend to print on upright with…
Dieses 3D-Modell ist ein inoffizielles Fan-Kunstwerk (Fanart) und steht in keiner offiziellen Verbindung zu Monster Energy Company oder deren verbundenen Unternehmen. Alle Rechte an der Marke Monster Energy , dem Logo, den Schriftzügen,…
🦎 Articulated Gecko It’s the perfect fidget toy, desk companion, or gift for reptile lovers! ✨ 🛠 Print Settings & Recommendations Nozzle: 0.4 mm Layer Height: 0.2 mm Infill: 5% Supports: ❌ No supports needed! 🎨 3 Ready-to-Print Profiles…
Halterung für den Schutzdeckel der Gasflasche. Im WoMo fliegt der meist in irgendeine Ecke und man findet ihn nicht wieder. Der Halter kann im Gaskasten angeschraubt oder einfach nur geklebt werden. Der Schutzdeckel ist sicher verwahrt.…
The tie is made in two sections, a “top” and a “bottom,” and 4 link pieces to connect them which are one of the scales but sliced in half. Print one top, one bottom (choose your length) and 4 sets of links. You will need to glue the link…
Same thing as the original, less supports.
Replacement power outlet (EU type) for Gira System 55. All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original.…
The StageTop 4 Deck Card Shoe is a token of appreciation for those interested in our crowdfunding campaign and accessory for StageTop 2: 3D Printed Gaming Tables . While made as an accessory for StageTop Encore Gaming Tables, this 4 Deck…
A functional replica of the Steam Deck Repair jig seen in Valve's Steam Deck Teardown Video . Handy for keeping the Deck stable while upgrading the internal SSD or replacing drifting thumbstick modules. This is a remix of ryohazuki224's…
Finally it's ready - my card box for Disney's new trading card game Lorcana! Thanks again to all who gave me feedback for the design and so the box now has the following features: - protects 60+ cards in sleeves and over 100 without…
A double decker koozie, double walled for better insulation and capable of fitting two 12 oz cans. Load from the bottom
I was quite surprised that I did not find any frontplate for the Elgato Stream Deck MK.2 so I had to try to make one on my own. Actually this is the first prototype (printed at 0.30 mm) and so it's far away from being perfect. But it fits…
2026 Update: It looks like since the original launch of the Steam Deck some chargers might come with different length of cable now. My original release charger has 1.5m of cable and it is already a tough fit even when rolled up tightly.…
Based on RobotsRUs' MTG Commander Deck Box . This deck box fits 1 deck with a window for the Leader, 50 single sleeved deck cards, and 10 single sleeved Don cards. It probably fits double sleeve too, I don't double sleeve so I haven't…
My takes on the Characters, NPCs and Creatures of Dragons of Stormwreck Isle are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of…
Remeshed the model and properly corrected and shaped the neck to look properly part of the rest of the squid update: Added lower poly/smaller file sized versions for people with not so good computers/internet. They are all the same…
Step up your game with these visually enhanced deck cases, a creative remix of an existing design loved by TCG players. While the original functionality remains untouched, capable of holding over 100 sleeved cards with ease, it's the…
So way back in the day I found the Pokebox Switch case by 3D Printing World ( https://www.thingiverse.com/thing:3474587 ) and I remixed the top of that case to be an Ultra Ball. The BEST Pokeball. More recently I found their version that…
The first Foldable kickstand for Steam Deck work in progress EDIT: Now with second version for steeper angle! (deutsche Beschreibung weiter unten) This is an easy-to-print foldable stand for the Steam Deck. The print is optimised for…
My son wanted a new cave for his new Leopard gecko enclosure, only he wanted a rock wall for the gecko to climb on that we can stick some plants to, he wanted the cave to be built into it so it's one unit. the back is completely smooth so…
Introducing the "Midnight Hunter" Owl Necklace — a 3D printed standout that adds a touch of edge to your festive style. The bold yellow owl head, with intense black eyes and a sharp beak, makes a statement at holiday gatherings. Crafted…
Geo-Cubes linked into a necklace. I created the larger Geo-Cube & posted it here last year. I linked a few of them full-size at that time. I've been experimenting with smaller cubes linked into longer chains, culminating in this necklace.…
This is a remix of Gimpel's awesome expanding deck box with an unlocking movement. A slight twist of the top makes the six locking mechanisms slide out and release it. While I was building two of these, I made at least small tweaks to…
After designing my business card glider , I decided to try an all 3D printed design. Taking a lot of inspiration from exosequitur's collection of gliders , I came up with this smooth gliding design that just fits on the bed of a Prusa…
MTG deck box that holds a 100 card commander deck with plenty of room to spare for tokens. Also holds up to 36 12mm D6 dice, to represent tokens, counters, etc. Requires 8 6x2mm magnets Printing: Print the lid top side down. Assembly:…
Remix originally from Thingiverse: 1363148 (I think). Scaled up and bottom chopped off slightly for better printability. Has 2 holes for 8mm round magnets 3mm thick.
This is a simple necklace holder composed of two parts that are easy to print and to assemble using glue. It was designed by my daughter who is willing to share it to the world :D
Printed with Winkle's Marble filament with a 0.6 nozzle for speed and it looks quite good. If printed with a 0.4 one you'll definitely get a better quality. I used support (only touching the build-plate) on the base piece, as the…
Necklace display / support / holder / stand by marco_canelas - Thingiverse
